SEMPRE Sp. z o.o. Sp. k.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm Kedoyv Da Hepfx Ahvsdi - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: good (used), Year of construction: 2005, Gluing unit Motorized height adjustment Homatic NC 21 control unit Frequency converter A20 hot melt adhesive unit for roll material up to 3 mm and strip material up to 20 mm edge thickness End trimming unit (two motors) Feed control LCD flat panel display Feed rate 18.5 m / min ? Feed rate steplessly adjustable 8–24 m/min or 12–24 m/min Minimum working width 55 mm at workpiece thickness 22 mm / 100 mm at workpiece thickness 60 mm depending on workpiece length Workpiece projection 30 mm Workpiece thickness 12–60 mm Workpiece thickness without contour milling and finishing unit min. 8 mm Jointing/milling unit Workpiece preheating A 20 gluing unit / A 34 hot melt adhesive unit Magazine for solid wood edging, strip material, and roll material Roll cutting device Pressure zone KL end trimming unit Release agent spraying device top/bottom Melting unit with granulate hopper instead of glue pot QA glue pot front section, quick-change (for color changes) Pre-milling unit Contour milling unit with interchangeable heads Universal milling unit Automatic multi-trimming unit, complete Finishing unit The illustrated return unit is not included in the scope of delivery. The data were taken from a data sheet and are therefore supplied without guarantee. Kedpfx Ajyvy D Ishvedi Exact configuration on request.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Technical specifications: Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6–60 Edge thickness (mm): 0.4–6 Feed speed (m/min): 10 Overall length (mm): 4930 Weight (kg): 1420 Equipment: Control system with 15" touch screen Jointing unit with 2 milling heads Edge feed GluJet adhesive application system, 2.3 kW, automatic glue height adjustment, nozzle with sensor Pneumatic pressure unit Pneumatic end trimming unit Diamond cutters left & right with CM technology Corner copying unit with diamond cutters Surface scraper Buffing unit Special features: Extendable workpiece support Motorized pressure bridge adjustment with NC axis via program control Diamond jointing cutters left & right Extraction hoods for end trimming unit Ksdpoyvwk Sjfx Ahvodi MOT 4 multifunction milling unit Pneumatic vertical tracing rollers Pneumatic tilting device for MOT 4 milling unit MOT 2 scraper unit with chip collection box Spray device for infeed and outfeed areas Availability: by arrangement Location: Röllbach

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Kdedpfx Aheyvt Exevji Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: excellent (used), Year of construction: 2005, Edgebanding Machine Manufacturer: Brandt Model: KDF 540 Profiline Year of manufacture: 2005 Operating hours: approx. 7,718 h Edge thickness: 0.3-3 mm (roll), 8 mm (magazine) Workpiece thickness: 8 - 50 mm Total length: 5,360 mm Kdjdpfx Aheyvr H Ievoi Connected load: 7 kW Feed speed: 11 m/min Height adjustment: Electric Joint adjustment: Electric Equipment: Jointing unit: Yes End trimming unit: Yes Radius flush milling unit: Yes Corner copying unit: Yes Radius scraper: Yes Surface scraper: Yes Buffing unit: Yes Spraying device: Yes

Condition: excellent (used), Hebrock 3003 Edgebander Well equipped, option to inspect prior to purchase Pre-milling units Zero-joint AirTronic system – glue-free, hot air technology Glue application by roller, Interchangeable glue tank Pneumatic pre-cut guillotine Kdedpfx Asyvq Dfshvei Pressure rollers Anti-adhesive fluids Cut-off saw for final trim Top/bottom milling unit, R1 – R2, pneumatically adjustable Corner rounding unit, pneumatically adjustable Pneumatic flat scraper Maximum workpiece height: 50 mm Maximum edge thickness in roll: 3 mm Feed speed: 10 m/min Very good condition, fully functional Leasing options available

Condition: good (used), Code: 0338 Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge bander with a cartridge-based adhesive system for wood edges, pvc, abs, veneer, suitable for furniture, panels, custom-made furnishings, kitchens, bathroom cabinets, carpentry shops, and various - CE Standard Features: Quick glue replacement: patented cartridge system that allows for quick and efficient switching between EVA and PUR glue during operation, or for changing glue colors - Simply replace the cartridge, no complicated cleaning of the glue tank is required - Ready for use in 3,5 minutes Technical data: Kjdpfsyvh Syex Ahvjdi Min/max panel height mm 6/45 Applicable edge thickness mm 0,4 - 6 Max gluing height mm 51 Min panel width mm 60 Min panel length mm 180 Feed speed mt/min 8 Composition: Gluing unit: Automatic feed for roll and strip edging - Patented Holz Her cartridge system - Roller press unit Tilting front and rear end trimming unit - Motors 0,22 Kw Multifunction unit with controlled axis for trimming and chamfering - N° 2 motors 0,6 Kw Edge scraper unit Glue scraper unit for removing any glue residue Brush unit for perfect cleaning Holz Her control system: Rotatable and tiltable control panel - All units can be activated individually - Unit functions with text display and graphical support - Display for unit preselection - Program list with program names and numbers - Self-diagnosis Soundproof booth Compressed air 6-7 atm Overall dimensions mm 4300 x 1200 x 1675 h Weight kg 1700

Condition: used, Year of construction: 2022, Connected load 7.8 kW, multi-radius blade (R2/R1), surface levelling blade, plastering station, chassis with pneumatic 3-point adjustment, jointing up to 50 mm workpiece thickness, corner milling unit R=2, LED internal lighting, release agent spraying system, cleaning agent spraying system. Storage location: Supplier. Kdjdpfx Aeyvht Rohvoi

Condition: used, Year of construction: 2005, functionality: fully functional, operating hours: 3,900 h, Year of manufacture: 11/2005 Single owner Low operating hours Kedpfx Ahjyu U Rfevedi Feel free to contact us if you have any questions

Condition: excellent (used), Year of construction: 2019, I sell the edge banding machine Cormak EBM 200, year 2019. Configuration: Edge banding EVA glue Radius milling R2 Polishing brushes End cutting saws separated Edge thickness 0,4 - 3,0mm / Veneer edges possible Kdsdpjyu U N Iefx Ahvsi Element height 10-50 mm Top feeding band Total length 2060mm Very good condition, fully working.

Condition: used, Year of construction: 2011, used, in excellent condition, low operating hours Manufacturer: Lange Model: B85K Year of manufacture: 2011 Machine no.: 132 CE type-certified Edge thickness: 0.4 – 3.0 mm Max. workpiece height: 50 mm Min. workpiece width: 75 mm Min. workpiece length: 120 mm Feed rate: 7 m/min Cutting from the coil Cutting unit: 0.2 kW Flush milling - chamfer milling: 2x 0.27 kW Flat scraper Extraction connection D 120 mm Space requirement approx. 2200 x 1130 x 1300 mm Kodpfx Ahsyu U Epevodi Weight approx. 600 kg Total connected load 2.5 kW Warehouse location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 7,845 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, HOMAG Ambition 2260 Kjdpoyu S Iuefx Ahvedi

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Kdsdpfx Aheyu If Nevji Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: excellent (used), Edgebander BRANDT Ambition 1220 PRE-MILLING UNITS Glue application by roller Tank features quick-change function (machine is supplied with only one tank) Kdedpfxoyu H Hfo Ahvji Pneumatic pre-cut guillotine Pressure rollers Finish-cutting saws Top/bottom milling unit R1-R2 (pneumatically adjustable from 1mm to 2mm) Corner rounding unit Profile scraper (pneumatically engaged) Pneumatic flat scraper Max workpiece height: 60mm Max edge thickness in roll: 3mm Max feed speed: 11m/min Machine length: 430cm Machine is well-maintained and in very good condition. Leasing purchase available.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, operating hours: 1 h, edge thickness (max.): 3 mm, feed rate X-axis: 9 m/min, total length: 4,230 mm, overall weight: 1,350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Authorized FELDER Group Dealer for Albania and Kosovo. We offer this NEW FORMAT4 Tempora F400 45.03L X-motion edgebander, year of construction 2024. Showroom machine only a few meters for testing purposes. It includes 1 year warranty from Felder Group. The machine year is December 2023. It is fully equipped machine, with extra options such as changable gluepot and large digital display (x-motion). We guarantee everything about the machine and we can even provide installation from Felder certified technician that has installed over 100+ Felder Temporas in the region. Feel free to ask for any information. If you have any questions or need more information, feel free to send us a message or give us a call. Kdjdpoyuz I Rofx Ahvei

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included 6th unit: Kdsdjyuylujpfx Ahvsi Corner rounding unit Tools included 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, power: 16.2 kW (22.03 HP), input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, overall weight: 2,200 kg, TECHNICAL DETAILS Number of machining units: 10 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough trimming unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Fine trimming unit Tools included 8th unit: Corner rounding unit Tools included Kdsdpfxjyuyfzo Ahvsi 9th unit: Radius scraper unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Power: 16.2 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,415 x 1,670 mm Machine weight: 2,200 kg EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 9 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included Kdsdpfx Aoyux Rijhvji 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm Kjdpfeyux Egsx Ahvedi MACHINE DETAILS Power: 11 kW Line voltage: 400 V Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 648, functionality: fully functional, operating hours: 347 h, power: 6.8 kW (9.25 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, total length: 4,000 mm, overall weight: 600 kg, For sale is a well-maintained Lange B90KF edgebanding machine. The machine is fully operational and remains connected for testing. Includes extensive accessories and basic materials. Equipment and technical data: - Glue pot Ksdpfx Asyuvk Hehvedi - Pressure zone - Pre-milling unit - Edge feed - Saw unit - Milling unit - Scraper blades Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0 / 5.0 mm Electrical connection: 400V, 50 Hz, 3-phase Total power: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Weight: approx. 600 kg A video of a recently produced demo workpiece can be sent via WhatsApp on request. All information without guarantee. Price is net plus VAT. An invoice for the machine will be issued.

Condition: used, OTT Tornado - TOP Control - via a 15-inch color touch monitor for full automation and maximum operating comfort CM CombiMelt gluing system suitable for processing EVA and PUR hot-melt adhesives as well as all common cleaning granulates Joint processing unit for attaching chipboard panels Automatic roll magazine Automatic edge magazine Double end trimming unit with automatic swiveling 0° / 3° Flush milling unit - for flush trimming - 12mm Fine radius milling unit - profiling knives R2 - R5 Automated copying milling - corner rounding Scraper unit - radius - bevel Surface scraper unit Sliding agent spray device - PU Cleaning set with fine buffing unit Very stable workpiece support with roller conveyors - FRONT with scissor extension Complete tool equipment included Machine is AS NEW in EXTREMELY WELL-MAINTAINED CONDITION Machine from retirement Initial commissioning in 2009, very few operating hours Leasing option available In stock in Lieboch Kdjdpfxsyuvblj Ahvei

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Single-sided edge bander with PUR, EVA, and AirFusion glue Minimum panel height: 8 mm Maximum panel height: 60 mm Ksdpfsyuurvex Ahvodi Minimum edge thickness: 0.3 mm Maximum edge thickness: 22 mm Panel support guides Panel infeed alignment system Pre-milling unit Gluing system End trimming unit Rough trimming unit (top and bottom) Fine trimming and rounding unit Corner rounding unit Edge scraper unit Brushing unit

Condition: good (used), Year of construction: 2009, machine/vehicle number: 130, functionality: fully functional, power: 4.4 kW (5.98 HP), input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 40 mm, edge thickness (max.): 2 mm, height adjustment type: mechanical, feed rate X-axis: 7 m/min, actuation type: electric, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, overall weight: 400 kg, year of last overhaul: 2026, Equipment: CE marking, with hot-melt glue application onto the workpiece, suitable for edge material up to 2 mm, workpiece height approx. 10 - 40 mm, maintenance-free glue pot, ready for operation in approx. 3.5 min, HF cross-cutting station (12,000 rpm), HF milling station (12,000 rpm), incl. carbide tool, feed rate approx. 7 m/min, extendable workpiece support, working table height approx. 900 mm, extraction nozzle D = 100 mm, weight approx. 400 kg, power consumption 4.4 kW, 400 volts. Sale in 'as is' condition as inspected, ex location Seevetal, without freight and packaging, subject to prior sale. Kdsdpsyuff Hefx Ahvji

Condition: used, Felder G680 edge bander, pre-milling cutters, glue application by roller, pneumatic pre-cut guillotine, pressure rollers, finish-trimming saws, top-bottom milling unit R1 – R2, corner rounding unit, profile scraper, flat scraper, polisher. Edge thickness 0.4–3 mm, max panel height 50 mm, total power requirement 7.22 kW, machine length 405 cm. The corner rounding unit requires inspection as it is not functioning properly. Kedpfx Asyufawehvjdi

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 1,400 h, power: 11.5 kW (15.64 HP), workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, total length: 5,860 mm, Single-sided edge banding machine, right-handed version For hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt glue. Can process PU adhesive granulate in compliance with adhesive processing regulations. Glue reservoir positioned leak-proof below the glue roller. Precisely metered glue application to the workpiece via glue roller; no adjustment required for varying workpiece thickness. Selectable glue roller rotation: co-rotating or counter-rotating direction. Glue temperature monitored via electronic thermostat. Automatic glue temperature reduction during work breaks. Infrared hot-melt adhesive activation. Automatic edge magazine for rolls and fixed lengths, including roll holder, Ø 800 mm. Equipped with reinforced pre-cutting shears for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at machine infeed. Electronic control system: power control PC 20+ BRANDT control system with color graphics user interface for easy and convenient operation and programming. Technical details: - Tiltable operator panel at machine infeed - Durable short-stroke membrane keyboard - Color graphic flat screen - Industrial PC with Compact Flash disk as mass storage - Aggregated function keys with LED status indicators - Color pictograms to assist user navigation - Online language switching between various foreign languages - Display of essential machine target and actual states - Status messages in plain text - Easy selection and correction of position points - Simple axis adjustment (with suitable unit configuration) - Online help in plain text via accessible help menu - Production data acquisition for production time, edge length, and workpiece count—daily and total values Kdodpfxeyud S Ej Ahvji - Inspection and maintenance interval display - Remote service capability via integrated modem and installed service software - Save processing programs - Production according to processing programs - Data backup of processing programs