Homatec Inh. H. Sonntag

Condition: good (used), Year of construction: 1982,

Condition: good (used), Year of construction: 1964, number of straightening rollers: 17, straightening roller diameter: 45 mm,

Condition: used, Package conveyor Gjdpfez Akf Tsx Ak Uekb Length: 2800 mm Width: 940 mm

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Gsdez Akfyspfx Ak Ujkb Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages Gjdpfx Aoz Akftsk Uokb -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Router motor power: 1.1 kW Voltage: 380 V

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, straightening roller diameter: 290 mm,

Condition: excellent (used), functionality: fully functional, power: 158 kW (214.82 HP), Year of construction: 2017, machine/vehicle number: HHKHZ803EF0000242, excellent condition Gedpfxsz Akdve Ak Uekb

Condition: good (used), Year of construction: 2003, DMG DMU 70 Evolution DMG DMU 70 Evolution machining center with Heidenhain ITNC 530 control, built in 2003, in very good original condition. The machine comes from a renowned aircraft galley manufacturer and has only processed aluminum. Technical details: X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm Control: iTNC 530 Heidenhain Main spindle: Spindle speed range: 20 - 18,000 min/-1 Drive power: 35 / 25 kW Max. torque: 130 / 87 Nm Tool interface: HSK-A63 NC rotary table: Table clamping surface: 700 x 500 mm Swivel range B-axis: 0 - 180° Swivel range C-axis: 0.001° Max. table load: 350 kg Centering bore: 30 H6 mm T-slots: 7x 14H7 x 63 mm Table speed range: 21.5 rpm Tool magazine: Number of tool positions: 32 Max. tool length: 315 mm Max. tool diameter: 105 mm Max. tool diameter with free adjacent pocket: 130 mm Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 50 / 50 / 50 m/min Feed rate: 20,000 mm/min Feed force: X / Y / Z: 8 / 8 / 7 kN Total power consumption: 50 kVA Machine weight approx.: 8.5 t Space requirement approx.: 4.5 x 3.5 x 3.5 m Gksdpfxjz Akdis Ak Ujb About the machine: Offered is a DMG DMU 70 Evolution machining center with a Heidenhain ITNC 530 control. This machining center is in very good original condition. It comes from a company where it was used to manufacture aluminum parts for aircraft galleys. It has a very easy-to-use control system. The guides are regularly lubricated by the central lubrication system. The DMG DMU 70 Evolution has been mechanically and electrically inspected by us. Take the opportunity to view and test the DMG DMU 70 Evolution on-site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: used, mileage: 970 km, power: 90 kW (122.37 HP), first registration: 12/2025, fuel type: electric, overall weight: 2,660 kg, fuel: electricity, energy efficiency: A, color: yellow, gearing type: automatic, suspension: steel, number of seats: 5, total width: 2,159 mm, total height: 1,811 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, E07 Hill-start assist, F2W Winter package, H1K Pre-climatization, I41 16" alloy wheels, JP7 Blind Spot Assist, SA4 Airbag for driver and front passenger, 502 Digital extra: Updates for intelligent speed assistance system, 806 AEJ X5/1, B25 Parking brake, electric, BA3 Active Brake Assist, BB0 Braking system with ABS and ASR, BB3 Electronic Stability Program (ESP), C0Z Door sill trims with "Mercedes-Benz" lettering, C1J Gear shift knob in leather, C6L Multi-function steering wheel, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM0 Bumpers painted, D18 Roof rails, E00 High-voltage battery - Bi-Relay version, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1K Navigation package, E1W Selection of recuperation levels, E2J AC charging 22 kW / DC charging 75 kW, E2K Charging cable Mode 3 (Type 2, 3x32A, 22kW) 5m, E38 Extended range, E3N Digital extra: Extended MBUX functions, E3P MBUX multimedia system and navigation with 9.5-inch display, E4S Digital extra: Smartphone integration, E8T High-voltage battery (45 kWh), EB1 45 kWh battery - water-cooled, EC5 Pre-wiring for digital extras, EI0 Wireless charging system for mobile devices, EM7 2 USB interfaces in the center console at the rear, ES1 12 V socket in the passenger compartment, ES2 12 V socket in the trunk / cargo area, EW5 Digital extra: Remote and Charging Premium, EW8 Digital extra: Remote and Navigation Services, EX8 Digital extra: MBUX Navigation Plus, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F2U Parking assist, rear, F3S Exterior mirrors painted black, F49 Windshield with heating, F4W Windshield washer fluid reservoir with larger volume, F56 Mirror in passenger compartment. We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Godjz Akdcjpfx Ak Uokb Furthermore: Leasing/financing and trade-in possible! - Errors and prior sale excepted! - All information without guarantee ... more on our homepage.

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Gksdpfjz Akc Sjx Ak Ueb Additional information - Specification - Back stop - Roll shelf

Condition: ready for operation (used), functionality: fully functional, Swivel bending machine, type 2000 x 2-3mm - Bending length 2000mm - Sheet metal thickness over the entire length 2-3mm - Bending process performed manually - Counterweight Gsdpfx Akez Akc Eo Ujkb Dimensions: L x W x H 3 x 0.8 x 1.5 meters / Weight 1600 kg Subject to errors and omissions.

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Holzma Type: HPL 380 Year of manufacture: 2011 Gjdpfxsz Akcxe Ak Uekb Technical data Cutting length: 4,300 mm Cutting/lifting table width: 2,200 mm Max. panel size: approx. 4,300 - 2,200 mm Min. panel thickness: 9.5 mm Saw blade overhang: 95 mm Max. saw blade diameter: 380 mm Main saw motor: 13.5 kW Scoring motor: 2.2 kW Scorer Saw carriage feed rate: 1,150 m/min Program slider: up to 90 m/min Clamping jaws: 7 pieces Lifting table payload: up to approx. 4,000 kg Control system: HOLZMA CADMATIC 4.0 Total connection: approx. 28.7 kW Working height: approx. 920 mm Lifting table: 4-column lifting table Loading: from the rear Air cushion tables: depending on the configuration CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, mileage: 237,539 km, power: 99 kW (134.60 HP), first registration: 10/2019, fuel type: diesel, tire size: 225/65R16LT, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2019, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - Speed limiter Gkjdpfx Akoz Akcrs Uob - Rear view camera - Stability control - Alternating current = Further Information = Tire size: 225/65R16LT Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 7 mm Rear axle: Tire tread depth left: 10 mm; Tire tread depth right: 8 mm Unladen weight: 2,099 kg Payload: 1,401 kg GVWR: 3,500 kg Damage: None

Year of construction: 2014, condition: excellent (used), Vötsch VCS³ 7034-5 Climate Testing Chamber / Temperature and Humidity Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 335 liters For sale is a used Vötsch VCS³ 7034-5 climate testing chamber with temperature and humidity control, programmable touch panel control, and water-cooled design. The system is suitable for professional temperature and climate testing, humidity testing, environmental simulations, material testing, electronics and component testing, as well as for research, development, and quality assurance. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Temperature Range: -70 °C to +180 °C Humidity Control: included Water-cooled design Test Chamber Volume: approx. 335 liters Godpfx Asz Akcfek Uskb Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R404A, 2.50 kg Refrigerant 2: R23, 0.75 kg Equipment: Programmable touch panel control Temperature control Humidity control Water-cooled design Stainless steel interior Large viewing window Test chamber lighting Separate digital temperature and humidity display Several stainless steel inserts in the test chamber Program mode and manual mode Test specimen port Ø 125 mm Additional test specimen port Ø 50 mm Front main switch Electrical connection with approx. 3.5 m connection cable Connection for condensate drain / overflow Cooling water connection Connection for demineralized water Compressed air connection Dimensions: External Dimensions (W × D × H): approx. 872 × 1,758 × 1,800 mm Internal Dimensions (W × D × H): approx. 580 × 765 × 750 mm Weight: approx. 585 kg Transport Data: Dimensions (W × D × H): approx. 872 × 1,758 × 1,800 mm Transport Weight: approx. 585 kg Condition: Used Optical condition as shown in the pictures. Scope of Delivery: Vötsch VCS³ 7034-5 climate testing chamber Programmable touch panel Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Gksdpjz Akb Iofx Ak Uob Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: used, Stahl Autocast 42 x 42SP, Tilt & Pour Casting Turning Machine. S/No. 87699 36. S/No. Country of Origin: U.S.A. Location: These lots are located in Warwick, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gkjdpfx Aez Akbuek Ueb

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Godsz Akbhopfx Ak Uskb Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: used, functionality: fully functional, mileage: 358,355 km, first registration: 11/2004, fuel type: diesel, empty load weight: 14,300 kg, maximum load weight: 11,700 kg, overall weight: 26,000 kg, tire condition: 80 %, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 400 l, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 3, total length: 9,200 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Equipment: ABS, air conditioning, crane, MERCEDES BENZ ATEGO 2533 Tipper truck BONFIGLIOLI P20.000XL/6SI crane 6x2 front suspension: leaf springs - rear suspension: air suspension differential lock manual transmission Gedpfxsz Akbbe Ak Uekb Euro 3 emission standard GVWR 26,000 kg - payload 11,700 kg overall truck length: 9.20 m wheelbase: 4.20 m tires: 80% remaining tread 400L fuel tank ABS sun visor air conditioning radio air-suspended driver's seat spare wheel all information is subject to change without notice and may contain errors.

Condition: good (used), Year of construction: 1986, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Gkodpfx Asz Aka Rok Ueb Swing diameter over support: 900 - 950 mm Total power requirement: 45 kW Machine weight approx.: 18 t

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,200 mm, Genox GXC1200T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 90kW Drive Motor with outboard rotor bearings (110kW & 132kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,200mm wide x 660mm diameter cutting chamber with a choice of either a 10 knife/5 row or 14 knife/7 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Gsdoz Aka Dspfx Ak Ujkb Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, Dimo Vertical Casting Machine, Top Platen 695mm x 696mm, Sat on Bottom Melting Pot Gkjdpfx Aoz Akaqjk Uob Location: These lots are located in Warwick, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 3 of Auction 3495

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, rotor diameter: 420 mm, rotor width: 800 mm, Genox GC800T Series - High Performance Granulator suitable for processing various materials including plastics, wood, rubber etc. 37kW Drive Motor with outboard rotor bearings, heavy duty precision machines rotor, and 580rpm operating speed as standard. 800mm wide x 420mm diameter cutting chamber with heavy duty, high inertia Cascade Rotor with 24 x rotor knives. Two rows of counter knives are mounted in the chamber. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. An electric assisted chamber opening with actuator with integrated safety interlocks and a setting jig is for pre-setting of knives off the machine are provided to enable quick, easy knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. This machine is as new and in stock at our warehouse in the UK and has only been used previously for exhibition displays. Significant saving available over a newly built machine machine. Godoz Akakspfx Ak Uokb

Condition: good (used), Year of construction: 1972, Turntable diameter: 1000 mm Torque at the spindle: 900 Gedpfsz Akadox Ak Ujkb Total power requirement: 17 kW Machine weight (approx.): 6.1 t

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. Gksdpfxsz Ai U Ts Ak Ujb 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 55 kW (74.78 HP), rotor diameter: 520 mm, rotor width: 1,000 mm, Genox GXC1000 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW, 110kW & 132kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1000mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 50 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). Gkjdpfxsz Ai U Ho Ak Usb A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.