Thorwesten Maschinenbau GmbH

Condition: used, Year of construction: 2005, turning length 200 mm swing diameter 20 mm spindle bore 20 mm Dcodpfxezkbp Ej Ac Hji control Cincom Number of working hours ca. 52.219 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2022, EMCOTURN E65 SMY - SIEMENS 3-AXIS CNC TURNING MACHINE WITH A TAILSTOCK AND POWERED TOOLS INCLUDING Y-AXIS AND C-AXIS Highly efficient universal turning machine for complete machining with stable and precise linear guides. State-of-the-art control technology SINUMERIK 828D with ShopTurn dialog programming. Main spindle: • Connection A2-6" (DIN 55026) • Max. bar diameter: ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm Djdpfx Ajzi Rr Tjc Hoci • Speed range: 0-5000 rpm Tailstock: • Connection A2-6" (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: • 12-position tool turret VDI 30 radially arranged with direction logic for up to 12 powered tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40mm Includes: • Hollow chuck cylinder incl. draw tube • C-axis for main/tailstock • Mechanical spindle brakes • Sinumerik 828D control with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 15" multi-touch color monitor - 3D simulation, etc. • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (additional pump (3.5 bar)) • Part ejector and flushing through the tailstock • Air gun with spiral hose • LED machine bay light • Hydraulic unit • Interface for chip conveyor • Vibration-damping leveling feet • Mounting angle and high-performance anchor • Documentation / CE certificate Machine No. S6E222101 Year of manufacture: 2022 • Sinumerik 828D with dialog programming • Tool turret • 12-position tool turret VDI30 • Hollow chuck cylinder, C-axis for main and tailstock • Coolant system with coolant pump, part ejector • Hydraulic unit • Chip conveyor Jomatec 1200 mm • Tool breakage and wear monitoring • Part collection device • Short bar loader interface SL1200 • Tool measurement • 14 bar high-pressure coolant system • 3-jaw chuck BB-D 210/3 KK6 • Maximum machining length 175 mm • Maximum finished part diameter 65 mm • Maximum finished part weight 4.5 kg • Internal tool holder • Straight milling holder 90 mm • Angle drilling and milling holder • Door automation E 65

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Dsdezi Evgepfx Ac Hoci Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) Dcsdpezi Er Isfx Ac Hei - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: used, GOODWAY GCL-2 LATHE CNC Control: FANUC Series O-T Max. Diameter / Swing Diameter: Ø400 mm Max. Turning Diameter / Turning Diameter: Ø230 mm Standard Turning Diameter: Ø220 mm Max. Turning Length: 300 mm / Turning Length: 300 mm Max. Turning Diameter: Ø51 mm Max. Spindle Bore Diameter: Ø66 mm Spindle Mounting: A2-6 Motor Power (Cont. / 30 min.): 11/15 kW Max. Speed [rpm]: 4,500 rpm Max. X-axis Travel: 125 mm Dcodpfx Acjzi Dmws Hoi Max. Z-axis Travel: 320 mm Turret: 8 stations Accessories Hinged Conveyor Belt Machine Dimensions: approx. 2480 x 1300 x 1635 [mm] Machine Weight: approx. 3500 [kg]

Year of construction: 2006, condition: good (used), CNC Swiss turn Machine type: Gildemeister GD32-6 Control: GE Fanuc Series 16i-T Dedjziy Azopfx Ac Hoci Year: 2006 SPECIFICATIONS Turningdiameter: 33 mm Z-Axis: 320 mm Rapid motion: (X/Z): 30 m/min Max. auswerfen: ca. 190mm Max. revolution: 8.000 rpm Spindle power: 5,5 / 7,5 kW Tool capacity: 5+3 Req. space (LxBxH): 3,08 x 1,51 x 1,75 m Machine weight: 4.200 kg Equipment Bar loader magazine: Iemca

Condition: good (used), Year of construction: 2012, functionality: fully functional, Syntec control system, Spindle bore 42 mm, 9 driven tools, Counter spindle, Part collector, Chip conveyor, Dcjdpfx Acoziwqie Hji Loading magazine 3 m.

Year of construction: 2007, condition: good (used), CNC - lathe machine Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year: 2007 SPECIFICATIONS Max. turning length: 1.055 mm Turningdiameter: 120 mm Max. swing over bed: 285 mm Rapid motion: (X/Z): 20 m/min Main Spindle Max. revolution: 3.500 rpm Spindle power: 7,5 / 5,5 kW Bar capacity: 43 mm Spindle nose: A2-6 Amount of turrets: 2 Tool capacity: 6 + 6 Tool: Capto Tailstock Quill diameter: 85 mm Quill: MK 4 Djdpfxezinn Ej Ac Hoci quill range: 70 mm Tailstock cross travel: 520 mm Steady rest: hydraulisch Steady rest: SMW SLU-1-Z Equipment Chip conveyor Cooling pumps Tool setter

Condition: ready for operation (used), Year of construction: 1999, operating hours: 124,009 h, number of axes: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis main spindle: Yes • C-axis counter spindle: Yes • V-axis: Yes (programmable position) • Tool carriers: 2 (tool carrier I and II) • Driven tools on tool carrier I: Yes • Driven tools on tool carrier II: Yes • Number of tool stations: 10 per tool carrier • Thread cutting: Without compensating chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Cleaning system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Water-based coolant compatible Additional equipment • Chip conveyor: Hinged belt conveyor Dsdpjzim Hgofx Ac Hoci • Bar feeder: TRAUB DNH 61-3000 (preparation included) • Workpiece ejection device: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max clamping diameter 60 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher Dsdpfozim Ecsx Ac Hoci • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2012, CNC long-turn lathe Manufacturer: STAR Type: SR-20R IV type B Year of manufacture: 2012 Equipped with: FANUC 31i-B5 control Synchronous spindle Powered tools C-axis Programmable B-axis Y2-axis Dcedpfx Aezilk Rjc Hei High-pressure pump Back-end machining Fire extinguishing system Bar feeder magazine FMB TURBO 2-20

Condition: used, Year of construction: 2008, turning diameter 100 mm turning length 280 mm control Index C200-4D bar passage 60 mm spindle tunring speed 6.000 U/min auto power on hours ca. 76.525 In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine comes from its original owner, operates in an oil environment, and has undergone annual maintenance. Only brass was processed on the machine. Dsdezid D Ajpfx Ac Heci No tool holders are included in the scope of delivery! Accessories: - Short bar loader - Chip conveyor - Parts removal device Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale!

Condition: good (used), Year of construction: 1995, - Max. turning diameter: 160 mm - Max. bar diameter: 65 mm - 2 x tool slides, travel 70 mm - 2 x cross slides, travel 70 mm - 8-position turret, non-powered - Max. main spindle speed: 7,500 rpm - Chip conveyor Accessories Dcedpfx Ajzidcroc Hsi - Bar feeder IEMCA TAL 65/32 Dimensions (L x W x H): - Machine with chip conveyor: 4200 x 1385 x 1800 mm - Bar feeder: 4000 x 800 x 1400 mm Total weight: 6,500 kg

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, overall weight: 3,950 kg, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2006. This DMG GILDEMEISTER CTX 310 features a maximum spindle speed of 6000 rpm and a tool turret with 12 stations. With a power capacity of 24 kVA, this machine is designed for efficient performance. If you are looking to get high-quality turning capabilities, consider the DMG GILDEMEISTER CTX 310 machine we have for sale. Contact us for further details. - Total Power On Hours (Counter 1): 21887.4 h- Spindle/Run Hours (Counter 2): 11066.2 h- Power Capacity: 24 kVA- Max Current: 35 A (Jn max) / 38 A- Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 24 V Technical Specification Counter Spindle No Driven Tools Yes Dcsdpfxszh E Ake Ac Hsi

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Dcedpjzh Eh Tefx Ac Hoi Counter Spindle Yes Driven Tools Yes

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, spindle speed (max.): 5,600 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 520 mm, spindle motor power: 18,500 W, type of input current: three-phase, overall weight: 5,600 kg, bar passage: 42 mm, input current: 85 A, number of tool turrets: 2, number of tool stations in tool turret 1: 14, number of driven tool stations in tool turret 1: 14, number of tool stations in tool turret 2: 14, number of driven tool stations in tool turret 2: 14, CNC Lathe TRAUB TNC 42/65 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2009 CNC control: TRAUB TX8i Number of axes: 8 Stroke Y axis: +/- 35 [mm] Stroke Z1 axis: 450 [mm] Stroke X1 axis: 140 [mm] Stroke Z2 axis: 520 [mm] Stroke X2 axis: 140 [mm] Stroke E axis: 450 [mm] Spindle throughbore: 42 [mm] Max. spindle speed: 5600 [rpm] Increment C-axis: 0.001 [°] Spindle power: 18.5 [kW] Dcedpozh D Aisfx Ac Hei Counter spindle throughbore: 42 [mm] Max. counter spindle speed: 5600 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Type of tool holders: VDI 30 Number of tool stations - Turret 1: 14 Number of tool stations driven - Turret 1: 14 Max. speed driven tools - Turret 1: 4000 [rpm] Number of tool stations - Turret 2: 14 Number of tool stations driven - Turret 2: 14 Max. speed driven tools - Turret 2: 4000 [rpm] Total power required: 107 [kVA] Rated current: 85 [A] Supply voltage: 400 [V] Weight: 5600 [Kg] INCLUDED EQUIPMENT: x1 Set of collets x1 Set of tool holders x1 Chip conveyor x1 IRCO PROFIMAT ECO 42.6 bar feeder x1 KNOLL coolant system Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 2,244 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 610 mm, overall weight: 2,530 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 1998. This KOVOSVIT MAS OPTIMAT A50CA weighs 2530 kg and includes a bar feeder system with a long loading channel attached to the machine. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A50CA machine we have for sale. Contact us for further details. - Weight: 2530 kg- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Special feature: Iemca loading magazine- Included Components: Bar feeder system (long loading channel attached to the machine) Dcodpfx Aezhw H Uec Hoi Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Pinacho Lathe Type SE 200 Year 2023 Fagor CNC Made in Spain Includes Tooling Includes Goggles Machine is like new; it has only 200 hours of use Dsdpszhw D Tjfx Ac Hjci Exact Model: Pinacho SE 200-42 Ax1000/S1 Key Features: ✔ Only 200 hours of use ✔ Virtually new

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment Dcsdpfx Acszhwx Do Hei • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, overall weight: 7,000 kg, controller manufacturer: HAAS, number of axes: 3, This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details. Dedpfszhwlqox Ac Hoci • Configuration: 3-axis machine with driven tools; no counter spindle • Spindle bore: 103 mm • Chuck diameter: 315 mm • Max turning diameter: 406 mm • Max turning diameter over saddle: 368 mm • Max turning length: 864 mm • Tool turret capacity: 12 positions • Live tooling: Yes Additional equipment • Included tooling: 1 live tool + additional accessories (unspecified) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 2,818 rpm, travel distance X-axis: 110 mm, travel distance Z-axis: 310 mm, overall weight: 2,505 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 2002. This KOVOSVIT MAS Optimat A42 features a robust design with a weight of 2505 kg and a total power consumption of 12 kVA. It is equipped with a manual guide bar/tube loading support system for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS Optimat A42 machine we have for sale. Contact us for further details. Dsdjzhwcpepfx Ac Heci - Main Phase Voltage: 3x 400 V ~- Rated Current: 26 A- Total Power Consumption: 12 kVA- Frequency: 50 Hz- Control Circuit Voltage (AC): 110 V ~- Control Circuit Voltage (DC): 24 V =- Machine Lighting Voltage: 220 V- Machine Lighting Wattage: 2x 20 W- Control: Curve- Spindle diameter: 42 (50) mm- Spindle speed: 85 – 2,818- Number of tools: 4 side-cutting tools- 6 tool stations on the turret- Schematic / Diagram Reference: SCH 338 / 40004 - 34- Bar Feed Equipment: Fitted with manual guide bar/tube loading support system Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, overall weight: 2,520 kg, spindle speed (max.): 2,244 rpm, number of slots in tool magazine: 6, number of axes: 3, This 2-axis KOVOSVIT MAS Optimat A52 was manufactured in 2003. It has a machine weight of 2520 kg and includes a bar feeder guide tube system, tool turret station, and cooling fluid hose lines. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS Optimat A52 vertical horizontal turning machine we have for sale. Contact us for further details. - Main Voltage: 3x 400 V ~- Frequency: 50 Hz- Full Load Current: 25 A- Total Power Capacity: 12 kVA- Control / Auxiliary Voltages: 110 V ~ / 24 V = / 230 V- Lighting Power: 2 x 20 W- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Wiring Diagram Reference (SCH): 338 / 49004 - 34- Included Equipment: Bar feeder guide tube system, tool turret station, cooling fluid hose lines Dcjdpezhwazsfx Ac Hei Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1994, spindle speed (max.): 2,244 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 500 mm, overall weight: 2,490 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 1994. This KOVOSVIT MAS OPTIMAT A50CA features a robust design with a machine weight of 2490 kg. It includes essential equipment such as a bar feeder guide channel system and a tool turret assembly. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A50CA machine we have for sale. Contact us for further details. - Main Voltage: 3 x 380 V- Current: 25 A- Frequency: 50 Hz- Control Voltage: 24 V DC / 110 V AC- Enclosure Protection Rating: IP 54 / IP 20- Technical Standard: ČSN 33 2200- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Included Equipment: Bar feeder guide channel system, coolant piping hoses, work area enclosure guarding with viewing window, tool turret assembly Dsdpfxjzhwabs Ac Hsci Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 2,818 rpm, travel distance X-axis: 45 mm, travel distance Z-axis: 90 mm, overall weight: 2,500 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 2005. This KOVOSVIT MAS OPTIMAT A42 features a machine weight of 2500 kg and a total power consumption of 12 kVA. With 2 units available, if you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A42 machine we have for sale. Contact us for further details. Dcjdpszhv Tgjfx Ac Hji - Main Voltage: 3x 400 V- Frequency: 50 Hz- Current: 25 A- Total Power Consumption: 12 kVA- Control Voltage (AC): 110 V- Control Voltage (DC): 24 V- Lighting: 230 V / 2x 20 W- Control: Curve- Spindle diameter: 42 (50) mm- Spindle speed: 85 – 2,818- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Wiring Diagram Reference: SCH 338 / 40004 - 34- 2 units available Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 503 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Z-axis: 503 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 40 m/min, type of input current: three-phase, torque: 75 Nm, overall weight: 6,200 kg, spindle nose: A2-5, CNC Lathe NAKAMURA-TOME WT100 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2012 CNC control: FANUC 31i-B Distance between spindles: 735 [mm] Max. cutting diameter: 190 [mm] Max. turning lenght: 503 [mm] Stroke Y axis: -31 / +31 [mm] Stroke Z1 axis: 503 [mm] Stroke X1 axis: 135 [mm] Stroke Z2 axis: 503 [mm] Stroke X2 axis: 135 [mm] Rapid traverse rate X1 axis: 16000 [mm/min] Rapid traverse rate X2 axis: 16000 [mm/min] Rapid traverse rate Z1 axis: 40000 [mm/min] Rapid traverse rate Z2 axis: 40000 [mm/min] Rapid traverse rate Y axis: 6000 [mm/min] Spindle nose: A2-5" Max. bar diameter in turning spindle: 42 [mm] Spindle throughbore: 56 [mm] Max. spindle speed: 6000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 11 [kW] Spindle torque: 75.4 [Nm] Counter spindle nose: A2-5" Counter spindle throughbore: 56 [mm] Counter spindle stroke: 525 [mm] Max. counter spindle speed: 6000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Counter spindle torque: 75.4 [Nm] Max. tool holder cross-section: 20 x 20 [mm] Number of tool stations - Turret 1: 12 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 6000 [rpm] Number of tool stations - Turret 2: 12 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 6000 [rpm] Live tools power: 7.1 [kW] Total power required: 55.2 [kVA] Supply voltage: 400 [V] Weight: 6200 [Kg] INCLUDED EQUIPMENT: x1 IEMCA BOSS 545 E Type 32 L bar feeder (3 m bar capacity) x1 SMW-AUTOBLOK Mario Pinto PPBE-42 A5 collet chuck (S1 spindle) x1 Collet chuck (S2 spindle) x4 Radial driven tool holders x2 Axial driven tool holders x16 Static tool holders x1 Foot pedal control for chuck open/close x1 Parts catcher on upper turret with conveyor belt x1 Chip conveyor x1 Automatic lubrication system x1 Three-color status indicator lamp x1 Transformer x1 USB memory stick for parameter backup Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Dsdpfx Acjzhvwlo Hsci Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.