Wirecon Machinery GmbH

Condition: used, Year of construction: 2019, Functionality: fully functional, working width: 1,250 mm, welding power (max.): 200 kVA, wire diameter: 8 mm, mesh size: 10 mm, Ten Head Fully Automatic Spot Welding Machine with Medium Frequency Inverter DC Welding Power Supply • Equipped with two sets of 160KVA MF DC welding power supplies, three-phase machine • Double-layer automatic feeder • Effective welding area: 1200mm x 1300mm. According to your drawing, it can weld four mesh panels at a time Gisloww Nkgjhcdwzjw • Includes one automatic Y-axis wire-dropping hopper • Model: WL-SQ-MF160K

Condition: refurbished (used), Year of construction: 1980, Functionality: fully functional, working width: 1,200 mm, welding power (max.): 360 kVA, wire diameter: 8 mm, • Mesh width: 1200 mm • Wire diameter (longitudinal/transverse): [3 – 8 mm] • Wire spacing: • Transverse: min. 10 mm • Longitudinal: min. 50 mm • Performance: up to 50–60 welds/min • Wire feeding type: straightened rods • Welding: electric spot welding • Control system: PLC / automatic system (new control cabinet 2025) Gjlheww Nhrecdwzeiw

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm Gslhcowu Tu Dsdwzeiw 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Gislhcdwswu Dcxozew Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: excellent (used), Year of construction: 2007, COMPLETE mesh welding plant Plant consist of - 1. Mesh welding line SCHLATTER model MG-230 Min/Max wire diam - 3,5 - 14,00 mm Max width of mesh - 2.500mm Line and Cross wire feeding - from precut wires / bars Construction year - 2007 Gslswr Tk Hshcdwzeiw 2. COMBINED rolling/ribering/straightening/cutting line Line is COMBO - wire rolling/ribering/straightening/cutting Construction year - 2023. 3. Straight and cut machine WAFIOS model R-41-L Min/Max wire diam - 3,00 - 10,00 mm Max cutting length - 10.000 mm Construction year - 1990. Please contact us for more details. VIDEOS AVAILABLE upon request.

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Gielhcdwswp Ilyezew Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Condition: used, Year of construction: 1970, Functionality: fully functional, machine/vehicle number: D34E/8218, Offer Number: D34E/8218 Golhcswi Thmjdwzjiw Machinetype: mesh welder Make: SCHLATTER Type: PG8 Constr. year: 1970 wire diameter: 1,5-6,5 mm working width: 850 mm line wire distance: 20-60 mm distance of cross wire: 10-100 mm Location: Europe

Condition: used, Year of construction: 1990, Functionality: fully functional, machine/vehicle number: D34E/8275, Offer Number: D34E/8275 Machinetype: mesh welder Make: EVG Type: 145 Gjlhcdewi Tf Sswzsiw Constr. year: 1990 wire diameter: 3-5 mm working width: 2000 mm mesh width: 100x100 mm Location: Europe

Condition: excellent (used), Year of construction: 2020, High capacity, Fully Automatic Engineered Mesh Welding Plant SUPERWELD Longitudinal wires diameter 6.0 mm – 13.0mm* Number of longitudinal wires 39 Cross wire diameter: 6.0 mm – 13.0 mm* *Rebar real diameter Φ must not exceed 13mm !! Mesh width: 3.800 mm Mesh length min 1.000 mm – max 10.000 mm Longitudinal wires pitch at 100mm Cross wire Step min 50mm Cross wire overhang 50mm – 150mm adjustable Power transformer welding 10 x 420 kVA Gslhewig Exscdwzoiw Welding Speed of the machine at wire thickness 6x6mm, mesh spacing 100x100mm and 2150mm will reach 130 strokes.

Condition: used, Year of construction: 2002, Functionality: fully functional, SCHLATTER model MG 316 Mesh welding line Technical Details - • Purpose: For the production of standard mesh • Manufacturer Schlatter • Condition: Not in operation • Longitudinal wire Ø min: 3 mm • Longitudinal wire Ø max: 8.5 mm Gelhcov Unt Njdwzoiw • Crosswire Ø min: 3 mm • Crosswire Ø max: 8.5 mm • Cycles (transverse wires) max: approx. 120 • Max mat width: 2500 mm • Max nr. of longitudinal wires: 26 • Longitudinal wire feed: From coil • Crosswire feed: From coil • Longitudinal wire spacing: 100/150/200 mm • Crosswire spacing: 100-400 mm • Year installed: 2002 • Weight: ca. 30’000 Kg

Condition: refurbished (used), Year of construction: 2025, working width: 2,450 mm, usable width: 2,450 mm, Refurbished Schlatter MG903 - ZG24 Gielhjv Ed Anjcdwzew - Longitudinal wire insertion LFE - Longitudinal wire feed LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mat extraction MVL4.2 - De-stacker MS12 Control and power cabinet - Siemens S7 TIA machine control Mesh size : 2450mm Wire: 2-12mm

Condition: excellent (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 1/90, working width: 1,200 mm, welding power (max.): 400 kVA, wire diameter: 4 mm, type of input current: three-phase, mesh size: 25 mm, usable width: 1,200 mm, I will sell a mesh welder. The machine is fully automatic, both longitudinal and transverse wires are dropped. The machine underwent a major mechanical overhaul in 2025 - all damaged elements were replaced - bearings, seals, bushings and other elements that are subject to wear and tear. The hard drive in the computer used for programming was replaced with a new one in 2024, and a software backup was made. Main features of the machine: - the machine is equipped with a torsion beam - the welding section can rotate relative to the mesh - maximum dimensions of the open mesh - 1200mm x 2000mm (after modifying the feeder guides, it is possible to increase the mesh width to about 1400mm) - minimum mesh mesh (between the longitudinal wires) - 25mm - in the case of other dimensions, a plastic template for other mesh spacing must be made - the places where the longitudinal wires are dropped are set mechanically - it greatly simplifies programming - the mesh meshes between the cross wires are moved using a servo drive and are set in the program - wire adjustment range: 2.5mm - 10mm - the machine is equipped with 2 longitudinal wire feeders that work simultaneously - it is possible to drop two different wire diameters - the machine is equipped with 4 100KVA transformers and 5 welding actuators - it also has both longitudinal wire presence detection and cross wire after dropping - if there is no wire, the machine will stop - the finished mesh is received and dropped automatically - programming is done in dedicated software on a computer with Windows, the program is written in text and uploaded to the PLC controller After being brought to Poland, the machine was started and worked. It is currently renovated, dismantled and ready for transport. The machine is accompanied by full mechanical and electrical documentation. A film showing the machine abroad before dismantling: youtu.be/Pb6dEFNO7zo Golhcdsv Duabswzsiw A film showing the machine already working in Poland: youtu.be/32LeeVx0ZeA

Condition: good (used), Year of construction: 1991, Mesh welding line EVG model G95/102 Min / max wire diam - 4,00 - 12,00 mm Max width of mesh panels - 2.750 mm Gjlhcdevxq Eiowzoiw FULLY AUTOMATIC - Lines wires and CROSS wires feeding from coils / spools. Please see attached document !

Condition: excellent (used), Year of construction: 2003, JAGER SUPER FLEX mesh welding line Min / Max LINE wires diam. - 6,00 - 25,00 mm Min / Max CROSS wires diam. - 4,00 - 16,00 mm Giolhcdjvxqnkowzjw MAX width of mesh panels - 3.650 mm Line and cross wire feeding from precut wires ( bars) PLEASE SEE FULL TECH DETAILS IN ATTACHED PDF DOCUMENT !!

Condition: refurbished (used), Functionality: fully functional, working width: 1,200 mm, welding power (max.): 100 kVA, Schlatter MG900, 1200mm wide, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables Gijlhcevvf T Aodwzew

Condition: excellent (used), Year of construction: 2020, Mesh welding line Brand - Schnell Italy Construction year - 2020. Min/Max wire diametr - 4,00 - 12,00 mm Max width of mesh panels - 2,500 mm Max length of mesh panels - 9,000 mm Line wires feeding - from precut wires Cross wire feeding - from precut wires Gjlhcdjvuhvqjwzsiw Condition - EXCELLENT !!

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, working width: 1,240 mm, wire diameter: 12 mm, type of input current: AC, usable width: 1,240 mm, Machine Overview: Schlatter MG900 MG12 Mesh Welding Machine - "Offical Expose upon request" The Schlatter MG900 is a powerful and refurbished resistance welding machine, specifically designed for the production of wire mesh panels. With a width capacity of up to 1250 mm and a length of 3000 mm, it handles wire diameters of up to 12 mm. This machine has undergone extensive modernization to deliver maximum efficiency and flexibility in production. Main Components • LV - Longitudinal Wire Feeder o Upgraded with a high-precision servo axis o Hopper magazines for longitudinal wires up to 3000 mm • MG12.4 - Mesh Welding Unit o Equipped with 3 to 6 transformers. o Up to 12 Schlatter welding presses with a capacity of 5 kN •QFD34 - Cross Wire Feeder o Allows for double cross wire insertion for two different cross wire diameters / length, *Note: The second level is not yet installed in the photos • MVL - Mesh Extraction Unit o Controlled by a new MS2N Servo Motor from Bosch Rexroth CrtlX o Equipped with four Schlatter mesh grippers (expandable upon request) • MS - Mesh Stacker o Automatically stacks mesh panels with a travel path of up to 3100 mm • Control and Power Cabinet o Siemens S7 TIA Control System o Rexroth CrtlX Components for high-dynamic motion control Specs: • Mesh Width (Transverse Wire Length) max. 1250mm / min. 200mm • Mesh Length (Manual Loading) max. 3200mm / min. 300mm Gijlhevtg Sbecdwzew • Distance Between Outer Longitudinal Wires max.1200mm • Longitudinal Wire Spacing 20 - 150mm • Cross Wire Spacing min. 12.5mm • Longitudinal Wire Diameter 2.0 - 10.0mm • Transverse Wire Diameter 2.0 - 8.0mm • Maximum Number of Longitudinal Wires max.24

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 25560, Arbeitsbereich Trägerhöhe : min. 70mm - max. 250mm Trägerlänge : in Stufen von 100mm - max. 14000mm Gielhevrb U Iecdwzow Basisbreite : 60mm, 80mm Zick-Zack-Teilung : 200mm Stapelhöhe : max. 500mm Drahtdurchmesser Obergurt : min. 5mm - max. 12mm Untergurt : min. 4mm - max. 12mm Zick-Zack : min. 3,5mm - max. 6mm Arbeitsgeschwindigkeit : max. 75 Takte/min (30m/min)

Condition: good (used), Year of construction: 2019, Mesh welding plant Progress Progress M System Evolution Welded Wire Mesh Plant; width: up to 4mm; length: up to 12mm; min. width: 500mm; min. length: 1mm; max. bar length: 12mm; min. bar length: 500mm; bar length tolerance: +5mm; bar placing accuracy: +10mm; cross wire dia.: (5)-6-8-10-12-14-16mm; line wire dia.: (5)-6-8-10-12-14-16mm; bar on bar welding: 16mm on 16mm; Golhcdevlnu Iowzsiw standard centres: cross wires: infinitely variable (min. 35mm); line wires: multiples of 25mm; minimum centres: cross wires: 35mm approx.; line wires: multiples of 25mm; power supply: connected load (welding): 270kW approx.; connected load (other equipment): 110kW approx.; supply voltage: 400 V AC; control tension: 24V

Condition: excellent (used), Year of construction: 2009, PRATTO Mesh Welding line for 3D fence panels (and light mesh for construction use) Giolhcdwjudipfozsw Model Starweld POB-36-2100; production of mesh panels and 3D/bent mesh panels; mesh width: 2100mm; wire dia. longitudinal + cross wires: 3-6mm; line wire spacing min.: 50mm; cross wire spacing min.: 25mm; SPM: up to 140; 5 x 250 KVA transformers; max. number line wires: 42 with 50mm wire spacing; max. length of panels: 6000mm (20′); line consists of: payoff system; straightening-propulsion for longitudinal wires; loop LAR; powered straightening; cross wire payoff unit; cross wire loop; auto cross wire feed; welder; mesh trimming shear; mesh bending press; mesh ejection + stacking-turner; exit rolls

Condition: excellent (used), Complete production plant for production of 3D fence panels Plant consist of - Mesh line for 3D fence fully automatic ( Brand - PRATTO ) Powder coating line for 3D fence panels ( like new...only installed and tested) Gjlotywvushcdwzeiw Please contact us for more details.

Condition: used, Year of construction: 2000, Schlatter mesh welding line Gslhcdwstmw Nyezsiw Please contact us for more details. Thank you!

Condition: used, Year of construction: 2014, 3D fence panels production line PRATTO Gelhjtmw Nrecdwzoiw High performance mesh welding line designed to produce high quality wire mesh 3D fence panels including Eurofence and "V" shaped fence. Equipped with bending unit that allows for precise shaping of wire mesh Mesh width: 2500 mm, Distance between two outer most line wires: 2500 mm Line wire diameter range: 4 to 6 mm Cross wire diameter range: 4 to 8 mm Number of line wires maximum: 42 Single cross wire hopper fed Cross wire spacings: 50 - 500 infinitely programmable Line wire spacing: 50 mm, programmable in 50 mm steps Line wires from coils of wire Total power Kw: 1250 Voltage: 400v-3-50

Condition: excellent (used), Technical Details : Year of manufacture: 1985 (fully electric in 2007, partial in 2010 underwent a mechanical overhaul.) The mesh max. width: 1500 mm Mesh density: 15 welding heads in arbitrary distribution Increment: 20mm – 200mm. Wire thickness: 1.2mm - up to 2.2mm (max 650 N/nmm - We have already welded 2.5mm also wired.) Energy demand: 14 kVA (max) Gslhcjryv S Uodwzsiw Weight: approx. 8 tons Drive: digital servo, control (PLC). Stepless regulation.. Accessories: manual

Condition: excellent (used), Year of construction: 2004, Technical Details : Year of manufacture: 2004 Gjlhcdjryv Siowzjiw The mesh max. width: 2200 mm Mesh density: 20 welding heads in arbitrary distribution (40 heads are also possible) Increment: 20mm - up to 200mm Wire thickness: 1.6mm-3.0mm (max 550Nnmm) Energy requirement: 8 kW Weight: approx. 10 tons Drive: digital servo, control (PLC).. Stepless regulation.. Accessories: manual