B & G Maschinenhandelsgesellschaft mbH

Condition: ready for operation (used), Year of construction: 2016, Edgebander manufactured in 2016. This HOMAG KAL 370 features a continuously adjustable feed speed of 18-20 m/min and accommodates workpiece thicknesses from 8 to 60 mm. It includes advanced gluing and trimming units, as well as a comprehensive software package for efficient operation. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KAL 370 machine we have for sale. Contact us for further details. • Feed speed: Continuously adjustable 18–20 m/min • Fixed stop side: Left • Workpiece thickness: 8–60 mm • Workpiece overhang: 30 mm • Throughput equipment: Pre-installation for Boomerang TFU140 • Feed lock: Available • Feature packages: Future-Paket 5; Foil/High-Gloss Package (bottom) • Infeed features: Sliding carriage; Workpiece alignment at infeed; Workpiece support with roller track; Infeed barrier • Workpiece transport: Transport device; Top pressure • Cleaning/Prep: Release agent spraying unit (top/bottom) • Jointing/Milling: Joint trimming unit; I-System-DIA jointing cutter set WD60; Workpiece pre-heating (up to 60 mm thickness) • Gluing: Gluing unit; Preparation for Airtec activation unit; Adhesive application system; Application units QA60 and PU60; Pressure tank for PU application unit • Magazine/Pressure: Edge magazine; Pressure zone • Spraying: Lubricant spraying unit (top, bottom, side) • Trimming/Milling: Snipping unit HL81 (bevel/straight, 0.8 kW); Pneumatic adjustment for flush/overhang trimming; Pre-milling unit BF10; HM milling cutter set (straight); Form milling unit FK11 • Tooling/Changeover: I-Exchange head system (automatically adjustable/FK); I-DIA radius cutter set (for FK, R=2 mm, Z=4); Standard milling unit SF21; Multi-profile scraper MN21 (automatic); Profile knife set for MN20/21 • Additional units: Joint scraper FA20 BASIC; Automated scanning for joint FA20; Buffing unit FA06 (top/bottom); Powercontrol PC23 Powertouch • Control/Software: Software package WoodCommander; Antenna sequence control; Machine data acquisition and evaluation; Error diagnosis; Teleservicenet-soft • System/Networking: Emergency stop interlock; Network connection (Ethernet); Manual control for setup mode; Language: German • Documentation: On data carrier and paper Additional equipment • Boomerang return system TFU140/20/08-Optimat • Workpiece detection (sensor-based) • Basic outfeed return line Nwedpfxey Hrtpe Afajf • CE for cells (systems)

Condition: used, machine/vehicle number: 008477, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Nedpfx Afsy Hq Nvoaowf Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: good (used), Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Nwedpfx Afsy Hlapoasf Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg 420

Condition: ready for operation (used), Year of construction: 2012, workpiece width (max.): 60 mm, product length (max.): 7,845 mm, Edgebander manufactured in 2012. This HOMAG KAL211 Edition 2264 features a working height of 950 mm and accommodates workpiece thicknesses from 8 mm to 60 mm. It includes various units such as a gluing unit, joint trimming unit, and pre-milling unit, enhancing its versatility. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL211 Edition 2264 machine we have for sale. Contact us for further details regarding this machine. • Feed speed: 18–25 m/min • Feed speed (max with FK11 unit): 20 m/min • Working height: 950 mm • Pneumatic connection: 6 bar • Total length: 7845 mm • Workpiece width (min): • 60 mm at 12–22 mm thickness • 105 mm at 23–40 mm thickness • Workpiece thickness: 8–60 mm (extended via options • Edge material thickness: • Rolls: 0.3–3 mm • Strips: 0.4–20 mm • Electrical: • Supply voltage: 400 V / 3 Ph / 50 Hz • Total load current: 67 A • Control voltage: 24 V • Control system: powerControl PC22 (Windows XP based) • Software: woodCommander; woodScout (option); Schuler MDE Basic • Aggregates/units: • Separation agent spraying unit (top/bottom) • Joint trimming unit (2 motors, 4 kW each) • Gluing unit A20 with 2 rollers (Quickmelt system) • PU65 application unit (exchangeable, Teflon coated) • Preparation for laserTec activation unit • End trimming unit HL84 (0.8 kW) • Pre-milling unit BF10 (1.5 kW) • Multi-profile form milling unit FK11 (manual adjustment) • Profile scraper PN10 • Finish unit (glue joint scraper + buffing unit) • Cleaning agent spraying unit Additional equipment • Automation package (No. 4013): • Automatic adjustment of infeed fence and pressure zone • Electronic height adjustment for the top pressure beam Nedpjy Hi Eiofx Afaswf

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 3214, functionality: fully functional, workpiece height (max.): 40 mm, feed rate X-axis: 10 m/min, total height: 1,600 mm, total length: 3,700 mm, total width: 1,445 mm, overall weight: 1,080 kg, TECHNICAL DETAILS Feed speed: 10 m/min Panel thickness: 8 - 40 mm Max. edge thickness: 3 mm MACHINE DETAILS Operating length: approx. 100,000 m Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,445 x 1,600 mm Weight: 1,080 kg EQUIPMENT/FEATURES PLC control including touchscreen Power stop/trimming knife Jointing unit with DIA milling tools Application of hot melt adhesive to workpiece Robust chain drive Upper operator panel, rapid adjustment from operator side Nwsdpfx Ajy Hih Rsfajf Double roller pressure Signal lamp for workpiece feed Quick-heating glue pot, maintenance-free Pneumatic end trimming for edge thicknesses up to 3 mm High-frequency crosscut saw High-frequency milling unit with replaceable cutter heads For radius, straight and chamfer milling Workpiece air blower Integrated collection container for edge material offcuts Extendable support arm on the front side Note: The machine can still be inspected under power until the middle of calendar week 19.

Condition: used, Year of construction: 2001, functionality: fully functional, workpiece height (max.): 45 mm, workpiece width (max.): 60 mm, workpiece length (max.): 180 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: pneumatic, total height: 1,640 mm, total length: 3,700 mm, total width: 1,940 mm, overall weight: 830 kg, Equipment: CE marking, documentation/manual, We offer this used HOLZ-HER 1310-1 edge banding machine, year of manufacture 2001. Type: 1310-1 Serial number: 126 / 0-106 Nodpfx Ajy Hfq Uefaswf Year of manufacture: 2001 Operating pressure: 6 bar If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2006, functionality: fully functional, operating hours: 0 h, total height: 1,700 mm, total length: 5,500 mm, total width: 1,100 mm, overall weight: 1,500 kg, Equipment: documentation/manual, This is a used edge banding machine for wood from the Sprint 1312 series. Njdpfxey E T Ixs Afaswf

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 177 operating hours Features and technical specifications: - Edge Control PPC 322 W control system with 21.5" 16:9 color touchscreen - ECO MODE energy saving function - Motorized pressure bridge adjustment - Extendable workpiece support 600 mm - Extension for extendable workpiece support - LED entrance light, 3-color - Motorized adjustment of infeed fence - Long infeed fence - Air cushion table BS 301 - iTronic package - Jointing milling unit FG201 with 2 milling heads, 64 mm high - Edge feeding unit 1903 - GluJet GJ 301 adhesive application system - Automatic glue height adjustment (sensing nozzle) - Cartridge storage for 4 cartridges - GluJet collection container - Pressure unit DW 301 with motorized NC axis - GM301 spray device after pressure unit with lubricant for high-gloss edges - Kappa unit 1918 pneumatic (60 mm) - Extraction hoods for Kappa unit - Milling unit FR301 MOT6 - Corner copying unit FF 301 MOT 1 incl. motorized horizontal axis adjustment - Shelf program - Scraping unit ZK301 MOT4 with high-gloss package - Surface scraper FK701 - Complete spray device for separating and cleaning agent - Buffing unit Availability: short-term Nwedpfx Afsy E Aykjasf Location: Flörsheim

Condition: used, Year of construction: 2010, functionality: fully functional, Maximum workpiece thickness: 45 mm Minimum workpiece length: 220 to 350 mm Maximum edge material height: 50 mm Minimum edge material length (for fixed dimensions): 330 to 400 mm Maximum edge material overhang top and bottom: 2.5 mm Edge material overhang front: approx. 10 to 20 mm Nwedpoy Ezx Sefx Afaof Edge material overhang rear: approx. 10 to 30 mm Minimum workpiece width: 90 mm Minimum workpiece thickness: 10 mm Maximum length with extension arm: 4269 mm Working length with extension arm: 4269 mm Depth with roller plates: 1425 mm Working table height: 888 mm Working width with retracted support: 210 mm Working table width with extended support rail: 680 mm Equipped with milling unit

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edgebander, year of manufacture 2021. The package includes a KOGI dual-bag chip extractor, 2.2 kW / 1650 Pa. The machine comes with an additional glue pot. An appraisal report is attached in the PDF. Type: EDGETEQ S-240 PROFI KDF 230 Machine number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Nodpfx Afjy Exwfeaswf Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum full-load current: 17.3 A Fuse: 20 A Short-circuit current: 5 kA Control voltage: 24 V Enclosure rating: NEMA 1 Largest motor: 4.6 A Largest heater current: 2.3 A If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, Edgebander SCM K100 evo Njdpfxsy Ew Ens Afaowf Pre-milling units, Glue application by roller, Gluepot with exchange function Pneumatic pre-cut guillotine, Pressure rollers, Front/rear trimming saws Top/bottom milling unit R1 – R2, Profile scraper Flat scraper, Polisher Machine length 320 cm, Feed speed 7 m/min, Max element height 50 mm, Max edge thickness 3 mm, Year 2026

Condition: used, Holz Her Sprint 1317 Heavy-duty version – Edge thickness 0.4 – 8 mm SPS screen control Infeed ruler controlled via SPS Pre-milling unit for jointing before the gluing section Fully automatic edge magazine for coil and strip materials Glue application station for cartridges + PU bonding Glue application using nozzle technology Workpiece height 6-50 mm Nsdpfey Ewv Hex Afaewf Glue height adjustment Pneumatic pressure unit Cutter unit 1918 for coil and strip material up to 8 mm edge thickness With pneumatic adjustment of miter saws from 0-10° angles Milling unit 1942 MOT2 for flush trimming 8 mm, radius milling, bevel milling – 15° Scraper unit for bevels and radii with 2 scraper holders Corner copying/milling unit 1832 for rounding corners up to 3 mm edge thickness in throughfeed Pneumatic engagement and disengagement Surface scraper unit – Finish Machine is OPERATIONAL and in GOOD CONDITION Ex works

Condition: good (used),

Condition: used, Year of construction: 2016, functionality: fully functional, Control: OMRON Feed speed: 12 m/min Panel thickness: 10–60 mm Nwjdpfxjy Er Hts Afaef Edge material height: 14–64 mm Edge thickness: 0.4–3/8 mm Minimum panel length: 150 mm Minimum panel width: at 150 mm length: 85 mm at 250 mm length: 50 mm Air supply: 7 bar Extraction speed: 30 m/s Power: 10 kW, 400 V, 18 A, 50 Hz Pre-milling of workpiece Teflon-coated table Cross-section Edge milling Corner milling Profile scraper Glue scraper Polishing unit

Condition: used, Year of construction: 2021, functionality: fully functional, The automatic edge banding machine WDN0004 is designed for the hot processing of pre-glued edge bands for finishing straight and contoured panels. Thanks to this technology, the thickness between the edge and the panel is practically eliminated, resulting in an excellent finish. Quick setup and commissioning: the machine is ready for operation in just 2 minutes. Manufactured by the Italian brand Freutek, the unit features a scratch-resistant work surface and a robust sheet metal frame, and comes equipped with an automatic feeder. Dual scrapers ensure a clean, glue-free finish. The machine is fitted with automatic edge banding on both the front and rear sides. Additional rollers on the work surface ensure optimum pressing pressure of the panel against the glue unit. A powerful 3.59 kW motor provides the necessary performance. The Freutek WDN0004 offers maximum protection against burns during processing and is equipped with an adjustable-height edge guide, a rubber infeed roller, double flat scrapers on both panel sides, and an edge cutter. Edge thickness: 0.4–2 mm. Panel thickness min./max.: 12/43 mm. Feed speed: 7 m/min. Nwodpfoy Er Epsx Afajf

Condition: used, Edgebander Holz Her Model Triathlon 1486 V straightening glue application end trimming unit with 2 motors trimming unit corner rounding unit edge scraper corner rounding glue scraper Nwedpfxsy Ep U Es Afaof brushes CE compliant

Condition: excellent (used), Year of construction: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edging. Suitable for furniture, panel materials, custom manufacturing, kitchens, bathroom furniture, joineries, and much more – complies with CE standards. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue pot height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Automatic feed for roll and strip material Nwsdpfx Ajy Emw Hjfasf Cartridge glue system enables in-operation switching between EVA and PUR adhesives or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer trimming, with 2 motors at 0.6 kW each Surface scraper unit Radius scraper unit Buffing unit Soundproof hood Control: Rotatable and tiltable operator panel All units individually controllable Function display with text and graphics Aggregate pre-selection display Program list with names and numbers, self-diagnosis Approximate machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used machine information: • Technical data subject to change and prior sale. • Prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Condition: used, Year of construction: 2006, functionality: fully functional, operating hours: 3,839 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: pneumatic, total height: 1,500 mm, total length: 4,900 mm, total width: 1,100 mm, Equipment: CE marking, documentation/manual, We are offering this used Holz-Her 1315 edge bander, year of manufacture 2006. Type: 1315 Nsdey El Nzepfx Afaswf Serial number: 4622/0-704 Factory number: 5009138 Series: KAM07V2 Year: 2006 Operating pressure: 6 bar Maximum pressure: 8 bar Holz-Her Sprint 1315 End trimming unit (one coupling has an air leak) Bonding possible with granules or cartridges 2 saws Top and bottom trimming Radius scrapers With corner rounding Flat scraper Polishing brushes Machine still in operation Available from 04/05/26 Can be loaded by forklift If you have any questions or require further information, feel free to send us a message or call us.

Condition: good (used), Year of construction: 2019, Edging thickness 0.4-3 mm / 5 mm Jointing unit Glue pot Pressure unit End trimming station Milling station Scraper blade Njdpfx Afoy El Eijaswf Flat scraper blade Workpiece thickness 8-50 mm Workpiece width min. 75 mm Workpiece length min. 120 mm Total length approx. 2940 mm + magazine plate overhang Exact equipment upon request The data was taken from a technical data sheet; therefore, accuracy cannot be guaranteed.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Nwedpfx Aey Eizzofasf Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: excellent (used), Year of manufacture: 2015 Touchscreen control with color display Additional glue pot Anti-adhesion fluid Pre-milling unit Corner rounding on 2 units Flat and radius scraper Activation of units from the control panel Polishing units Weight: 1625 kg Nwedpfxey Ef Uqe Afaof

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: 0-261-96-0637, Equipment: documentation/manual, Feeding and Discharge of Workpieces • Upper pressure belt • Variable feed rate: 8–18 m/min • Front air-cushion table • Automatic infeed fence • Prepared for connection to return system Edge Banding • PUR pre-melter, capacity 2.5 kg/h • Glue pot QA65, quantity: 2 • Support for narrow workpieces • Automatic edge feed Workpiece Finishing • Anti-adhesive and cleaning fluid system • End trimming unit • Edge milling unit with R-2 and R-1 tooling Nsdpfoy Eft Tox Afajwf • Flat scraper, top/bottom polishing unit • Multifunctional profile scraper unit with R-2 and R-1 tooling • Corner rounding unit with R2 tool, dual-motor MF50 Documentation • Language options: English, German, Croatian • Format: Data storage medium + paper documentation General Information • Year of manufacture: 2017 • Control system: HOMAG POWERTOUCH group • CE marking: YES • Availability: Ready for collection – April 2026 • Machine length: approx. 6,075 mm

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 0-261-04-6713, functionality: fully functional, operating hours: 6,836 h, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 18 m/min, actuation type: electric, total height: 2,300 mm, total length: 5,760 mm, total width: 1,555 mm, overall weight: 2,600 kg, Equipment: CE marking, documentation/manual, Single-Sided Edgebander HOMAG Optimat KDF 650 C (Ambition 1650 FC) – AIRTEC, Corner Rounding, powerTouch Basic Information: • Manufacturer: HOMAG • Model: Optimat KDF 650 C (Ambition 1650 FC) • Year of manufacture: 2017 • Condition: Used, fully operational • Location: Skwierzyna, Poland _____ MACHINE DESCRIPTION Professional single-sided edgebander designed for processing straight panel edges, applying various types of edging (tape and solid wood lippings), and complete finishing operations. This machine is a highly equipped configuration featuring, among others, the AirTec AT 15 unit for jointless edging technology, a dual WD 60 Corner Rounding unit, and the advanced powerTouch control system with touchscreen. Full automation and pneumatic adjustment of all processing units via the operator panel. TECHNICAL DATA • Feed speed: adjustable 8 – 18 m/min • Max. speed with corner rounding unit: 11 m/min • Working height: 950 mm • Workpiece thickness: 8 – 60 mm • Edging thickness (tape): 0.4 – 3.0 mm • Edging thickness (solid lipping/strip): 0.4 – 12.0 mm • Total machine length: 5,760 mm Nsdpsy Ec A Sefx Afaswf UNIT CONFIGURATION 1. Pre-milling unit: 2 x 2.2 kW with diamond-tipped heads. 2. Edging application A12: Quickmelt quick-change glue application unit, infrared pre-heating lamp for panel edges. 3. AirTec AT 15 unit: Enables processing of laser/function edging with hot air. Perfect invisible joints, no visible glue line. 4. Edging magazine: automatic for both tapes and strips. 5. Pressure zone: 1 main pneumatically-driven pressure roller + 3 secondary pressure rollers. 6. End trimming unit: 2 motors x 0.35 kW, for straight and angled cuts. 7. Top and bottom trimming unit: 2 x 0.55 kW, contra-rotating DFC cutters with pneumatic adjustment, position set via touchscreen. 8. Corner rounding unit (WD 60): 2 x 0.35 kW multi-function unit for complete corner finishing (3D corners). Adjustment via touchscreen. 9. Profile scraper MZ40: Pneumatically retractable (R1 / R2), settable via touchscreen. 10. Glue joint scraper: For removing excess glue (finished surface quality). 11. Buffing unit: 2 motors x 0.18 kW. CONTROL SYSTEM • powerTouch: modern control panel with 21.5" Full-HD touchscreen. • Intuitive graphical interface, production data logging (piece count, time, edging consumption). • Network capability (Ethernet connectivity). _____ Additional information for buyer: • Machine comes from official Polish distribution (HOMAG Poland). • Complete technical documentation included. • Possibility to inspect the machine during operation.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-200-01-2196, functionality: fully functional, input current: 63 A, height adjustment type: electric, feed rate X-axis: 25 m/min, actuation type: electric, total height: 2,000 mm, total length: 7,850 mm, total width: 2,300 mm, overall weight: 5,000 kg, Equipment: CE marking, documentation/manual, Edge banding machine, good working condition, fully electric adjustments, working speed 25m/min, available immediately. Nsdoy Ebl Sspfx Afaowf

Condition: excellent (used), workpiece height (max.): 60 mm, edge thickness (max.): 10 mm, height adjustment type: electric, total length: 7,200 mm, overall weight: 3,500 kg, Equipment: CE marking, OTT edge banding machine, model Twister Nwjdsy D Sm Rjpfx Afaof Jointing / cutting, flush trimming, longitudinal milling, corner copying (AKF), scraper blades R2/R1mm, surface scrapers, cloth disc unit. Spare slot for grooving unit. All spray nozzles, separator, lubricants, cleaning agents. Beckhoff control, each frequency inverter individually driven! Setup within the machine gap. Narrow-part shuttle. Demonstration available by arrangement. Machine available immediately. Sale in DACH region with warranty.