plasma Ingenieur- und Verkaufsbüro GmbH & Co. KG

Condition: used, Year of construction: 2010, clamping force: 320 kN, displacement volume: 891 cm³, injection pressure: 2,420 bar, overall weight: 17,300 kg, load hours: 47,000 h, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Fgsdpfx Aox E A Twjb Tek

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Stroke volume: 154 cm³ Clamping Force: 150 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 1900 x 2300 mm Eeight: 11000 kg Fgsdpfx Ajx Ey Tusb Tsk Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) incl. KUKA Robot (S&P 3788) Manufacture year: 2008 Operating hours: 36,061 Stunden Screw: 40 HVF mm Fgjdpfx Abox Ey Tne Tek Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 1000 mm Dimensions: 5100 x 1600 x 2700 mm Eeight: 7250 kg Connected load: 60 kW Accumulator, 4 x Corepuller, Robot Interface EM67, Airvalve, incl. KUKA Robot System KR 5 arc, Convejorbelt, Safety Gate etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit Fsdpex Eyvcefx Ab Tegk clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 678 cm³, injection pressure: 2.007 bar, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, installation height: 330 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,150 mm, Equipment: documentation/manual, warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX controller: MC5 year of construction: 2011 clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included screen text german CEE-socket 16A pressure accumulator for uprated injection speed Handling without safety fencing core pulling hydraulically 2x machine incl. Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 interface for handling Schuko-socket 10A measures & weight measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG technical data robot-system handling type: Linear manufacture: Wittmann Fodpox Eyuxjfx Ab Tsgk controller: W 833 year of construction: 2011 handling weight: 10 kg X axis: 900 mm Y axis: 1800 mm Z axis: 3000 mm B axis rotationn: 180 ° C axis rotation: 90 ° screen-text: deutsch total weight: 560 kg

Condition: good (used), Year of construction: 2008, operating hours: 26,033 h, clamping force: 4,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, displacement volume: 1,657 cm³, injection pressure: 2,022 bar, warehouse no.: 503220 manufacturer: BATTENFELD Fgjdpfex Eyufjx Ab Tek type: TM 400-3400 controller: UNILOG B6S year of construction: 2008 operation hours: 26033 h clamping force: 4000 kN distance between tie-bars h x v: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar equipment included: Screentext Multi-Language CEE-socket 16A core pulling hydraulically 1x air valve 1x Anti vibration mounts interface robot EUROMAP 67 interface USB Schuko-socket 16A measures of machine l x w x h: 7.2m x 1.75m x 2.42m total weight: 16400KG

Condition: good (used), Year of construction: 2005, operating hours: 50,932 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 45 mm, displacement volume: 318 cm³, injection weight: 250 g, mold height (min.): 300 mm, opening stroke: 500 mm, plate width: 740 mm, plate height: 470 mm, Engel VC 650/120 TECH machine in good condition. Currently not connected to power, was in production until 04/25. 1 core puller AS, 12 integrated hot runner zones, without robot. Inspection possible at any time. Fjdpsx Ex Htofx Ab Tsgk

Condition: used, Year of construction: 2000, operating hours: 89,978 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 60 mm, displacement volume: 848 cm³, injection weight: 763 g, mold height (min.): 350 mm, opening stroke: 950 mm, plate width: 1,300 mm, plate height: 1,080 mm, installation height: 950 mm, Engel ES 2050/350 HL-V machine immediately available. Machine can be inspected in operation. Includes handling robot. Equipped with 2 DS core pulls, 6 integrated heating zones, and 1 air valve. Fodpfx Abjx Ex Azs Togk

Condition: like new (used), Year of construction: 2017, Equipment: documentation/manual, ENGEL Victory 750/220 SPEX – Technical data Machine designation: VICTORY 750/220 SPEX Fodpfxox Ely Te Ab Togk Plasticizing 1: 1. Screw diameter (standard): 45 mm 2. Available screw diameters: 40 / 45 / 50 / 55 mm 3. Screw stroke: 200 mm 4. Max. injection capacity: 318 cm3 5. Screw speed: 230 min-1 6. Recovery rate (3-zone screw): 24.2 g/s 7. Recovery rate (barrier screw): 30.1 g/s Injection 1: 1. Injection rate: 229.0 cm3/sec 2. Injection pressure (regenerative): 1760 bar 3. Injection pressure (max): 2360 bar Nozzle 1: 1. Nozzle stroke: 350 mm 2. Nozzle contact pressure: 67.2 kN Plasticizing Unit 1: 1. L/D ratio: 20.0 2. Heating zones incl. nozzle: 5 3. Heating wattage: 13.4 kWel Clamping unit: 1. Clamping force: 2200 kN 2. Opening stroke + cylinder tolerance: 759 mm 3. Minimum mold height: 300 mm 4. Maximum distance between platen: 1050 mm 5. Platen size horizontal × vertical: 880 × 830 mm 6. Drop out chute width: 650 mm 7. Maximum mould weight moving platen: 1500 kg 8. Maximum mould weight stationary platen: 1500 kg 9. Maximum mould weight total: 3000 kg 10. Dry cycle stroke: 250 mm 11. Dry cycle time: 2.00 s Ejector: 1. Ejector stroke: 180 mm 2. Ejector force: 80.0 kN Drive unit: 1. Oil reservoir capacity – injection unit: 330 l 2. Oil reservoir capacity – clamping unit: 210 l Oil filter / Oil cooler: 1. Cooling power standard (25 °C water inlet): 12.0 kW 2. Water consumption oil cooler 25 °C: 1.00 m3/h 3. Water consumption oil cooler 32 °C: 2.10 m3/h Machine basics: 1. Weight total (without oil): 12.2 t 2. Total power: 72.0 kW 1. Hydraulic drive variant HV1 (standard) 2. Microcomputer CC300 3. 6-fold flow regulator , 0–10 l/min

Condition: new, Year of construction: 2021, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 28 mm (up to 30% glass resistant) Type: Horizontal Drive: Electric Hours: 35 (only!) Possible to buy another screw diameter on request: 36mm or 40 mm screw More information on request. Fgjdpfxox Elvue Ab Tjk 12 months Warranty in price.

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture: 2004 System: Fully hydraulic Control: MC4, color monitor, integrated control panel, built-in disk drive 2. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mold opening force: 220 kN Moving platen force: Opening: 105 kN Closing: 95 kN Platen dimensions (h × v): 1060 × 1095 mm Tie bar clearance (h × v): 710 × 710 mm Mold opening stroke: 920 mm Mold height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Injection volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Standard throughput: 108 g/s Increased throughput: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater power: 36 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Fgsdpfx Aex Eluksb Tek Dimensions and Weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, Arburg 470C 1500 400 (2014) Golden edition Clamping force: 150 t Screw diameter: 45 mm Distance between tie bars V: 470 mm Distance between tie bars H: 470 mm Type: Horizontal Fjdpfx Abex Elqre Tjgk Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, General Data Measurements width 1260 mm Fodpjx D Hnyjfx Ab Tegk Measurements depth 6460 mm Measurements height 2100 mm Clamping Unit Clamping force 2200 kN Additional Equipment Sepro Robot SDR 22 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, General Data Measurements width 1460 mm Measurements depth 5370 mm Measurements height 2060 mm Clamping Unit Clamping force 1600 kN Fsdpox D Hnmofx Ab Tsgk Additional Equipment Sepro Robot SDR 11 This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2005, operating hours: 79,600 h, General Data Machine weight 22500 kg Clamping Unit Clamping force 4000 kN Fodpex D Hnaefx Ab Tjgk Injection Unit Shot weight 1860 g Screw diameter 90 mm This Arburg 820S-4000-3200 was manufactured in 2005. It features a clamping force of 4000 kN, a screw diameter of 90 mm, and a shot weight of 1860 g. The machine operates with a SELOGICA control system and has a total installed power of 96.2 kW. Consider the opportunity to buy this Arburg 820S-4000-3200 hydraulic injection moulding machine. Contact us for further details regarding this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Clamping force 1300 kN Mould height min 275 mm Mould height max 500 mm This Battenfeld HM 1300/750 was manufactured in 2004. It features a clamping force of 1,300 kN, injection pressure of 2,116 bar, and a screw diameter of 45 mm. Equipped with a Unilog CC300 B4 control system, it supports a mold height range of 275 to 500 mm. Consider the opportunity to buy this Battenfeld HM 1300/750 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Fgodpfx Abex D Hhaj Tek

Condition: ready for operation (used), Year of construction: 2004, Clamping Unit Clamping force 1100 Kn Fedpfox D Hd Isx Ab Tegk This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 1100 Kn. Consider the opportunity to buy this Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of axis 3 Clamping Unit Clamping force 1300 / 1600 / 2000 kN Additional Equipment Fodpox D E Dyefx Ab Togk Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 1480 Measurements depth 4970 mm Measurements height 2160 mm Machine weight 8000 kg Injection Unit Screw diameter 55 mm Shot weight 476 g Stroke volume 523 cm³ Injection pressure 1904 bar Screw speed 196/280 1/min Clamping Unit Clamping force 1500 kN Opening stroke 600 mm Distance between bars 500 x 500 mm Size of mold platens 780 x 790 mm Ejector stroke 150 mm Ejector force for / back 22/11 kN Fgodpjx D Ethjfx Ab Tsk This hydraulic injection moulding machine was manufactured in 1997. It features a clamping force of 1500 kN and a screw diameter of 55 mm, suitable for precise injection moulding processes. The machine dimensions are 4.97 x 1.48 x 2.16 m, and it weighs 8 tonnes. If you are looking to get high quality moulding capabilities consider the Krauss Maffei KM 150-1000 C1 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, Injection Unit Screw diameter 55 mm Clamping Unit Clamping force 2500 kN Fgsdpfx Aex D Ecveb Tjk This Engel ES 1050/250 HL-V was manufactured in 2001. It features a screw diameter of 55 mm, clamping force of 2500 kN, and an opening stroke of 850 mm. The tool mounting platen measures 1050 x 650 mm, and it includes a robot. Consider the opportunity to buy this Engel ES 1050/250 HL-V hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements height 470 mm Dimensions Machine Length 470 mm Fgedpfx Asx D Ea Ujb Tsk Clamping Unit Clamping force 1100 kN This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 2400 mm Fgsdpox D Hrrsfx Ab Tek Measurements depth 7800 mm Measurements height 2200 mm Machine weight 20000 kg Main Drive Distance between bars 810x710 mm Injection Unit Screw diameter 70 mm Shot weight 1090 g/PS Stroke volume 1212 cm³ Injection pressure 1877 bar Clamping Unit Clamping force 4200 kN Distance between bars 800x710 mm Size of mold platens 1200x1100 mm This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, Clamping Unit Clamping force 4200 kN Injection Unit Screw diameter 70 mm Fjdpfx Abjx D Hyve Tegk This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 1560 mm Measurements depth 5980 mm Fgjdpfx Abjx D H Nqo Tjk Measurements height 2190 mm Machine weight 8900 kg Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 1900 kN Additional Equipment Air valves: 2 This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Fjdpfxjx D R T Hj Ab Tsgk Clamping Unit Clamping force 1500 kN Opening stroke 300 mm This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information. Application Types Injection Moulding