SI-CORE, d.o.o.

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm Ndsdpfozv Tdfjx Ahkea - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, Year of construction: 2014, A high-performance, fully operational industrial roller coating line by CEFLA. All machines are from the 2014 and operated continuously until the end of 2024 (discontinued only due to the end of production), well-maintained, and ready for immediate integration into production. This setup is perfect for furniture factories, flooring manufacturers, and door producers seeking top-tier automation and flawless surface finishing Line Composition (15 Units Total): Fully operational: Coating & Filling Machines: 4 units - Smartcoater MF-EVO Roller Coaters 1 unit - CEFLA SP1-EVO Roller Filler/Spackling Machine UV Curing Ovens: 2 units - CEFLA UV-R M1 Curing Ovens 2 units - CEFLA UV-R M2 Curing Ovens Ndjdpfszu Rufex Ahksa Transporters: 2 units – CEFLA TB900 Transfer Conveyors Dimensions: 900 x 1580 x Adjustable Height 860–940. Non-operational - for spare parts/repairs: 4 units – CEFLA Smartcoater MF-EVO Roller Coaters

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine Ndsdpfozuzt Eox Ahksa - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, Painting system for edge surfaces Manufacturer: WIKOMA Painting of narrow edge surfaces Commissioned: 2021 Intended use: Spraying the edges of furniture panels arranged in stacks. Scope of delivery: - 2 spray booths - 2 hot air drying tunnels - 1 sanding booth - Chain conveyor - Control cabinet The system was in operation until the end of June 2025. Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding. Ndedpfx Ajzuztxohkoa

Condition: used, Year of construction: 2022, - SCM DMC System / E83 2000 sanding machine Ndsdpfezuzkkjx Ahkja - Superfici Transporto conveying system - 2x Superfici Valiorta F1 B painting machines - 2x Superfici UV drying units Painting line Manufacturer: SCM/Superfici Painting line consisting of: Sanding machine Manufacturer: SCM Type: DMC System / E83 2000 Year of manufacture: 2022 Conveying system Manufacturer: Superfici Type: Transporto Year of manufacture: 2022 2x painting machines Manufacturer: Superfici Type: Valiorta F1 B Year of manufacture: 2022 2x UV drying units Manufacturer: Superfici Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Paint line Paint line consisting of: Vacuum loading system Technical data - 2-strand Nodpszuzhiefx Ahksda - Roller width: approx. 1000 mm Wide belt sanding machine Manufacturer: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical data - Working width: max. 1350 mm - Vacuum conveyor belt - Electronic sanding pad Belt conveyor system Manufacturer: Belting Year of manufacture: 2019 Technical data - Dimensions: 6100 x 1000 mm Dust extraction system Manufacturer: Heesemann Type: EA2 Year of manufacture: 1990 Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - equipped with 2 UV lamps Wide belt sanding machine Manufacturer: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Technical data - Working width: approx. 1350 mm - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-tier intermediate buffer Technical data - Tier size: 3000 x 1350 mm Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Paint robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Throughput width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles - Pump station with 5 Graco paint pumps Intermediate transport Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Throughfeed multi-level dryer Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Infeed conveyor belt - 4 UV drying lamps (1 below, 3 above) - mounted on 2 belt conveyors Venjakob Belt conveyor Manufacturer: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Manufacturer: Cefla Type: TT/1V/3750 Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Roller conveyor Technical data - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical data - with alignment table - 3 sanding units for cross and longitudinal processing of door leaf edges Belt conveyor Manufacturer: Belting Technical data - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Turning system for door leaves Manufacturer: Kraft Year of manufacture: 2018 Individual components of the system can be purchased separately as follows: Vacuum loading system €10,000.00 Büftering Classic 213EB wide belt sanding machine €12,000.00 Belting belt conveyor €3,500.00 Heesemann EA2 dust extraction system €2,500.00 Bürkle DAL1-1300 paint application machine No. 1 €7,500.00 Bürkle throughfeed drying tunnel €9,000.00 Bürkle DAL1-1300 paint application machine No. 2 €7,500.00 Elmag UV drying tunnel €13,000.00 Büftering Optimat SCO 313QHQ €15,000.00 4-tier intermediate buffer €10,000.00 Cefla TN3500/TT dust extractor €4,000.00 Cefla Spraybotic MD incl. pump station €50,000.00 Cefla TN3591/TT intermediate transport €4,000.00 Cefla VN 2000/3/7500/300-24 multi-level dryer €20,000.00 Venjakob UV drying tunnel €13,000.00 Cefla conveyor belt TN3500/E €2,500.00 Cefla conveyor belt TT/1V/3750 €2,500.00 Roller conveyor €2,000.00 Edge sanding and brushing machine €5,500.00 Belting conveyor belt €2,000.00 Kraft turning system for door leaves (2018) €20,000.00 Note: T

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Ndodpfx Aszuzg Sehksa Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal Ndsdozuzg Eepfx Ahkja - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2020, - Feed - Cutting - Cleaning - Infrared heating - UV curing - Coating - Digital printing - Structuring Nedpfszuzfzex Ahkeda - Excimer matting - Stacking Digital printing system Manufacturer: Hymmen Type: JUPITER - JPT C 680/548 with OFS 850 Year of manufacture: 2020 Technical data - Nominal width: 680 mm - Maximum printing width: 548 mm (expandable to 680 mm) - Maximum panel width in the OFS: 510 mm - Working height: 900 mm (+50 mm) - Processing: Printing and top coating from above, back coating from below - Operating mode: two-lane up to a max. part width of 255 mm; otherwise single-lane - System speed: 8-65 m/min - Printing speed: up to 50 m/min Jupiter digital printing unit (JPT): - Number of colors: 4 - Print heads per color: 8 (max. 10 possible) - Free slots for additional colors: 6 - Print head type: XAAR 2001 Printing unit with DLE structure: - Printing rows: 1 - Print heads per row: 8 (max. 10 possible) - Free slots for additional rows: 1 - Total print heads: 8 - Print head type: XAAR 1003 Specifications of the raw panel: - Length: 600-2800 mm - Width of the raw board before the longitudinal cutting process: 900-1260 mm - The panels are split in the longitudinal direction before digital printing and coating - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Cutting format saw: - Longitudinal slitting system with up to 5 saw cuts plus 2 trimming units for the production of finished panel widths of 160-510 mm Specifications for finished panels: - Length: 600-2800 mm - Width: 160-510 mm - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Feed system (feed): - Type: Vacuum portal - Feed stations: 2 - Discharge stations: 1 - Maximum feed rate: 8 cycles/min; with double stacking: 16 panels/min - Identical stacks per station: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm - Maximum stack weight: 5000 kg (combined) - Design: without pits - Type of transport: protective plate or pallet - Protective plate (infeed): Length 800-2800 mm; Width 1000-1260 mm; Thickness 20-30 mm (up to 150 mm for pallets); max. 80 kg per panel/pallet Stacking system (outfeed): - Type: Drop shaft - Stack positions: 1 - Maximum stacking rate: 30 cycles/min - Identical stacks per position: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm (alternatively: 1000 mm) - Maximum stack weight: 5000 kg (combined) / Alternative stack configuration maximum stack weight: 3500 kg - Design: with pits - Type of transport: protective plate or pallet - Type of protective plate feed: loading by forklift, separation by robot - Protective plate (stacking): Length 800-2800 mm; Width 1000-1200 mm; Thickness 20-30 mm; max 80 kg per panel; Material OSB or HDF Units: - Number of units: 35 - Process steps: Feed, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking Application: - Industrial single-pass digital printing line for the high-speed surface finishing of large panels (flooring and furniture), which creates realistic wood, stone, or custom decors directly onto substrates. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components Nsdjzq Axzepfx Ahkjda TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working width: 200 mm, working height: 40 mm, Equipment: documentation/manual, Impregnation machine / Coating machine Manufacturer: Schiele Type: Impregmat VM Mini Year of manufacture: 2016 Board coating machine with brush application, suitable for coating profiled boards, moldings, and construction timber. Suitable coating systems: Suitable for water-based paints and coatings Suitable for solvent-based paints, stains, and coatings Working width: approx. 30 - 200 mm Workpiece height: approx. 5 - 40 mm Workpiece length: from approx. 800 mm - endless Feed speed: approx. 20 m/min pneumatic double-diaphragm pump Stainless steel machine body for easy cleaning with roller conveyors before and behind the machine, length approx. 2000 mm each Ndodpfjzpydrox Ahkja Documentation & wiring diagram available

Condition: excellent (used), Year of construction: 2016, I sell the 2-head roller coating machine for surface finishing at parquet production Cefla Sorbini Smart Parquett MRF/300. Year 2016. Configuration: 2-head roller coater Oil type: Oxidativ, UV, Let Oil load : 4 – 30 gr/m2 + brand new unused vacuum pump +2 pcs. new rubber cylinder +1 pc. new feeding band Working width: 300mm Total length: 2,30m Total width: 1,30m Weight: 960kg Nodpfxszn Axcs Ahksda Available immediately. Fully working. Still in production. Possible to run and test. Documentation and CE included.

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, workpiece weight (max.): 500 kg, working width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a fully automatic coating system consisting of the following components: VEN SPRAY SMART spraying system VEN MOVE TRANSFER VEN TRANS BELT (x3) VEN TRANS BELT with dust protection hood VEN MOVE TRANSFER with drying chamber Air supply unit HC12 The system was installed in 2022 and was in operation for approximately 1 year (326 operating hours in pistol drive). TECHNICAL DETAILS VEN SPRAY SMART spraying system (year of manufacture: 2019) Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920±20 mm Njdpfxozlxils Ahkeda Working width: 1,300 mm Min. workpiece size: 300 x 100 x 10 mm Max. workpiece size: 3,600 x 1,200 x 50 mm Coating material: water-based paints, solvent-based paints Spraying process: Air, Airmix, Airless 326 operating hours VEN MOVE TRANSFER 180° (year of manufacture: 2022) Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3x VEN TRANS BELT belt conveyor (year of manufacture: 2022) Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours VEN TRANS BELT with dust protection hood (year of manufacture: 2022) Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920±20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m VEN MOVE TRANSFER with drying chamber (year of manufacture: 2022) Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h Operating hours (see image) Belt: 766 h Ventilation: 1,620 h Pistol drive: 326 h EQUIPMENT Fully automatic coating process Multi-layer coating programmable Automatic control of the entire coating process 6 freely programmable spray guns Suitable for water-based and solvent-based paints Suitable for automated coating processes in industrial applications

Condition: used, Year of construction: 1995, Used machine Year of manufacture 1995 Equipment and technical data: economical: - Turbo system: 25% higher plant output thanks to state-of-the-art application technology, and all within the same footprint! - reduced throughput times thanks to optimised automatic program control for fast UV systems - up to 70% cost savings compared with casting and spraying through the use of solvent-free systems and one-man operation Nedpfx Aezlbq Eshkoda flexible: - through cost-effective one-man operation with return function or, optionally, in pass-through mode for two-man operation - the system grows; additions with extra rolling, smoothing or sanding units are possible ergonomic: - easy operation thanks to ergonomic controls service-friendly: - thanks to cleaning circuit and quick-change system process-reliable: - top surfaces, exactly reproducible included: - roller conveyor 2000 mm long - ELX 1400 roller conveyor - bar conveyor 3000 mm long - UV drying channel 1 lamp 60/80/120 W Working height: 850 - 950 mm Application roller, rubberised: D=238 mm Metering roller, chrome-plated: D=174 mm Pass-through height: 3-120 mm UV radiation module: 80/120 watt mercury Connected load: approx. 21 kW Dimensions: 1300 x 3080 mm Availability: at short notice Storage location: Röllbach

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm Njdpfx Ahozk Epcjksda – Usable working height: 2500 mm – Pump flow rate: 500 l/min – Valve construction: stainless steel – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale Nsdpfx Ahszhblnsksda For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! Ndsdpfxszg Epue Ahksa For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: Ndjdpfx Ahozf N Niokja - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, functionality: fully functional, CM Macchine TIN-EVO 300/10 wood impregnation tunnel + RMS 40×800 Ndsdpfx Ahjzf Iyaekoa Four-sided impregnation machine + drying tunnel.

Condition: used, Year of construction: 2001, machine/vehicle number: 9830-01, working width: 1,300 mm, roller diameter: 250 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The coating system consists of several individual machines, which are composed as follows: Pos. 1 - MANFRED LAMPRECHT MASCHINENBAU BM 1300 - V (Brushing machine) Working width max.: 1,300 mm Total power: 4.2 kW Pos. 2 - BURKLE SAS 1300 (Coating machine) Ndjdjy Uwnbopfx Ahkea Working width max.: 1,300 mm Diameter of application roller: 250 mm Coating units: 3 Coating unit 1 Unit type: Metering unit Material: Steel Roller diameter: 180 mm Coating unit 2 Unit type: Application unit Material: Rubber Roller diameter: 250 mm Coating unit 3 Unit type: Filling unit Material: Steel Roller diameter: 250 mm Pos. 3 - BURKLE UV SYSTEM Working width max.: 1,300 mm Drying system: Ultraviolet lamps - UV System type: Motorized feed rollers Pos. 4 - BURKLE SLC 1300 (Coating machine) Working width max.: 1,300 mm Diameter of application roller: 250 mm Coating units: 2 Coating unit 1 Unit type: Metering unit Material: Steel Roller diameter: 180 mm Coating unit 2 Unit type: Application unit Material: Rubber Roller diameter: 250 mm Pos. 5 - HACKEMACK KTR 3370 (Drying machine) Working width max.: 1,300 mm Drying system: Ultraviolet lamps - UV Number of lamps: 2 System type: Feed belt The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8542

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: MKR30029343, MACHINE DETAILS Voltage: 400 V Njdoy Tn Rkspfx Ahkeda Frequency: 50 Hz Power: 6.2 kW FEATURES CE marking MAKOR unloader is not included in the scope of supply.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Nodpey E Huxsfx Ahkoda

Condition: good (used), Year of construction: 2015, operating hours: 600 h, functionality: fully functional, machine/vehicle number: DB 504404C, feed length X-axis: 20 mm, working width: 1,300 mm, working height: 940 mm, Machine for smoothing lacquer using a silicone belt with UV curing Nodoy Effcepfx Ahksda

Condition: good (used), Year of construction: 2018, functionality: fully functional, working width: 400 mm, Combined sanding, coating, and distributing machine Manufacturer: Rubio / Cosma Model: Monocoater RMC 420 Spray Year of manufacture: 2018 Rubio MonoCoater – All-in-one solution for parquet and solid wood flooring This combined sanding and coating machine is suitable for the application of oil, stain, or lacquer. Working width: 400 mm Pass-through height: 100 mm Length: from approx. 700 mm Equipped with: - 1 sanding unit with 2 sanding brush aggregates - 1 spray cabin for coating with 3 Kremlin spray guns and 1 Kremlin double pump PU 3000 - 1 pad distributor station with 2 pad aggregates - 1 brush station for distributing with 2 upper brush aggregates - 1 lateral brush station for distributing with 1 left-side and 1 right-side brush aggregate Scope of delivery also includes a brush cleaning unit RMC 420 CU2+QC in stainless steel design. Including 4 driven roller conveyors. Njdpfx Ahey Aybmokeda

Condition: good (used), GR6100 robot with hollow wrist Hollow wrist and axis 3 for routing paint hoses Njdpfx Asyxmt Uohkeda Flange for 3 spray guns Light barrier/reading barrier Connection for automatic color change