HZB-Maschinenhandel Rudolf Teufel

Condition: like new (used), Random Orbital Sander EVA 150 e/5 in T-MAX Fpodjyt Ei Nopfx Aa Eod - 350 watts - 230 volts - 2.1 kg - 6,000–12,000 rpm - 150 mm sanding pad diameter

Condition: like new (used), Mafell jigsaw P1 cc in Systainer Tmax - 230 volts - 900 watts Fpjdpfxjyt Eivj Aa Eed - 2.5 kg

Condition: excellent (used), functionality: fully functional, Hand-held circular saw K85 Ec in transport container - Stepless speed control - Cutting depth 88 mm Fpedpfxjyt Dphe Aa Eed - 2300 watts - 230 volts - 6.7 kg - 2250-4400 rpm - Very good condition Shipping available at additional cost.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hand planer Fpsdjyt Di Uepfx Aa Eod 230 Volt 2500 Watt 0-4 mm 13.2 kg with new replacement belts Shipping available at additional cost

Condition: like new (used), Single-hand planer MHU 82 in Systainer Fmax - Planing width: 82 mm - 800 watts - 3.4 kg - 230 volts Fsdpfx Aaoyty T No Eopd

Condition: like new (used), Cuprex router LO 65 EC - stepless speed control - supplied in a container with 22-piece router bit set - 230 Volt - 6.9 kg - 2600 Watt Fedpjyty Rnjfx Aa Espd - 6-12 mm tool holder

Condition: like new (used), Chain Mortiser LS 103 EO - 8.7 kg - Year of manufacture: 2016 - 230 Volt - with stand Fpodpjyty I Hefx Aa Esd - 2600 Watt

Condition: excellent (used), functionality: fully functional, Hand-held circular saw K85 Ec in transport container - Stepless speed control - Cutting depth 88 mm Fpedpfxoyty E So Aa Eed - 2300 watts - 230 volts - 6.7 kg - 2250-4400 rpm - Very good condition Shipping available at additional cost.

Condition: excellent (used), Timber framing chain saw ZSX EC 400 HM - 14.1 kg - 3000 watts - Cutting depth: 400 mm Fedpeyty Exsfx Aa Espd - 230 volts - with trolley and spare chain

Condition: excellent (used), Handheld circular saw MKS 145 EC - Year of manufacture: 2015 - Cutting depth: 145 mm - Power: 2600 W Fpsdpfx Aajyty D Is Eod - Voltage: 230 V - Swivel range: 0–60° - Saw blade diameter: 370 mm - Dimensions: height 430 mm x width 430 mm x length 710 mm - Weight: 13.8 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, - Year of manufacture: 2013 - 3000 watts - 230 volts/50Hz - 0–60° swivel range - 185 mm cutting depth with spare saw blade - Weight: 16.1 kg Fjdpeyty Awefx Aa Eopd - Very good condition Shipping available at additional cost

Condition: excellent (used), Carpenter's planer ZH 170 - 1800 watts - 220 volts - in original packaging Fsdpoyrnnxofx Aa Eopd - rustic blade - 170 mm planing width

Condition: excellent (used), Year of construction: 2018, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 16236/1, nominal power (apparent): 480 kVA, Great framing line Fedpfx Aajyngpgo Ejpd

Condition: ready for operation (used), Year of construction: 2019, COMPLETE TIMBER & ROOF TRUSS PRODUCTION LINE FOR SALE EU-based seller | Fully serviced | Immediate availability | Package sale We are offering for sale a complete, fully operational timber and roof truss production line due to a strategic business profile change. This is not a distressed sale and not for anyone! The system is offered while still in reliable, maintained, working condition, having been operated in continuous industrial production. All equipment: • has been regularly serviced • operated in a professional manufacturing environment • is ready for immediate integration into production SYSTEM INCLUDES 1. Package: 67.000 eur • Randek SPL728 Automatic Saw with Extraction Production date: 2019 • MiTek MARK III C Press System 50-ton press head with 20 press tables • ALUP Sonetto 8 + T270F CE Air Compressor Production date: 2019 2. Dipping Tank: 15.000 eur • Vyvos Dipping Tank 9.5 m length, manual hydraulic operation Incl. Bochemit Opti F Plus impregnation liquid (2024) 3. Forklift: 4500 eur • Doosan–Daewoo G30 E-S Forklift 3 t capacity, 3.3 m lifting height 4. Supports: 3000 eur • Steel supports for production and assembly 5. Nailers: 1500 eur • KMR3447 Nailers – 3 units Fodeylpv Repfx Aa Eepd 6. Trailer: 14.000 eur • Renault Mascott truck with 12.5 m trailer and supports IDEAL FOR • Manufacturers expanding production capacity • Companies entering roof truss manufacturing • Buyers seeking a tested, complete production system instead of a greenfield setup 📍 Location: European Union (Hungary) 📦 Viewing and handover by appointment 📩 Serious enquiries only

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, WORKBENCH FOR WOOD FRAME ASSEMBLY Direct sale from the manufacturer BOOSTON MACHINERY CARPENTER'S BENCH; JOINER'S BENCH; ASSEMBLY BENCH FOR PREFABRICATION DIMENSIONS - Working length: 6000 mm (other lengths available) - Width in standard setup: 3600 mm - Working height: 700 mm - Workbench for self-assembly – shipped on a large pallet (cost savings for you) - Mounting holes for SD-01 pneumatic clamps - Option to expand with additional modules Fedpfxsyk H N Eo Aa Espd Additional options – possibility to use pneumatically liftable rollers for horizontal transport.

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. Fedpoykqxdofx Aa Eepd • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: new, Year of construction: 2024, functionality: fully functional, Powerful and versatile panel saw packed with extra features Sliding table with 10-year warranty! Fpjdpfx Aasyglr Ds Eod - Anodized aluminum sliding table, running on hardened steel guides. - Crosscut frame complete with mobile aluminum fence for fast, precise positioning for angle cuts. - Extended outfeed table - Emergency stop push button on the front of the machine and on the side of the parallel fence. - Overload relay - Overhead saw guard with integrated dust extraction Ø 80 mm - Automatic brake on the main blade - Lockable main switch for the control circuit (110 V) - Manual right-hand side guide with position reading via metric scale, running on Ø 40 mm steel tube, and with micrometric adjustment. - Cutting capacity against parallel fence 1270 mm. Direct start of main motor - Three speeds for main blade - Scoring unit with independent motor and external setup and stop for quick repositioning of the scoring blade. The machine is compliant with CE standards. Additional features: - CompeX for angle cuts, integrated into the extension table, for quick conversion to angled cutting - Start/Stop switch on the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops - 3rd LCD stop for crosscut fence

Condition: new, Year of construction: 2024, functionality: fully functional, SCM Panel Saw, SI 400 EP NOVA with tilting blade and sliding table - “READY” electronic control with 2 controlled axes Specification: - Lifting and tilting of the saw unit - Automatic height adjustment according to tilt angle - Manual, semi-automatic, and automatic with memory - Up to 99 programs - Calculator and hour meter - Tool data setting Optional equipment: - CompeX for mitre cuts, integrated in the sliding table for quick changeover to mitre cuts - Start/Stop switch at the end of the sliding table Fjdeygll Rjpfx Aa Eopd - Eccentric clamp - Crosscut fence with 2 LCD stops - 3rd LCD stop for crosscut fence

Condition: used, used, excellent condition, lightly used Manufacturer: Mafell Model: MKS 165 E CE type-certified Motor: 2.7 kW Brake motor Cutting height: 165 mm Blade diameter: 410 mm New price approx. €4,000.00 Fpodpfx Ajycxhkea Eod Warehouse location: 97447 Gerolzhofen, loaded free on truck, unpacked Sold as seen in current condition, without guarantee or warranty

Condition: excellent (used), Year of construction: 2023, Roof Truss Pressing System for Sale – Complete Set with Tables and Crane For sale: a roof truss pressing system with full equipment – hydraulic press, assembly tables, and overhead crane. The machine is in excellent technical and visual condition, fully operational and ready for immediate use. Included in the set: - Hydraulic roof truss press (maximum pressure up to 242 bar) - Assembly and pressing tables for roof truss production - Overhead crane system with controls - Electrical control cabinet and safety components - CE marked Manufacturer: RANDEK (Sweden) – high-quality professional equipment for timber structure manufacturing Additional information: - Equipment has been regularly maintained - No additional investment required - Suitable for small and medium-scale production - On-site inspection available Fpedpfx Asx U Sncsa Eod For further information, please contact me.

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Hydraulic squaring instead of the standard solution Pneumatic squaring. Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system. Fedsx Tdtnepfx Aa Ejpd

Condition: excellent (used), CATALOGUE NUMBER 6907 TECHNICAL DATA Fpsdpfx Aex Rqx Ssa Esd - Loading hopper inlet at the top: 1980x1050mm - Loading hopper inlet at the bottom: 980x1050mm - Discharge for shredded wood: diameter 210mm - Rotor working width: 980mm - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife size: 40x40mm - Screen: 18mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French-made – Similar to WEIMA WL 10 – New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 88,900 PLN Net price: 2,160 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of major rate fluctuations, price may change)

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Fpodpfx Aox Igzqea Esd Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Condition: new, functionality: fully functional, Randek Truss System NT produces roof trusses using Fodpfx Aasxwkuqs Ejpd C-press heads, movable magnetic fixtures on a steel floor and one of our many crane systems. Crane systems: Wall mounted crane Column crane Motorized overhead crane Counter balanced crane Press head: 23T, 27T, 35T, 50T Laser system as an option.

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Fpodsxv Arxjpfx Aa Eod Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Station nr10: Working station - Upraiser table