Maintools Tsk

Year of construction: 2024, condition: good (used), Foam Cutting Machine Hyma NSL Manufacturer: Hyma (Denmark) Iiodpox Iwp Eefx Affjk Model: NSL Condition: Almost like new / exhibition machine quality Year of manufacture: 2024 Machine dimensions: Cutting height: 1300 mm Cutting length: 2470 mm Left table (from blade): 2000 mm Right table (from blade): 1250 mm Side stop height: 900 mm Additional Equipment according to Hyma = AA AA6 adjustable angle side stop, 0-90 degrees AA9 upgraded drive motor, 2.2 kW AA11 electric grinding device with dust extraction (motorized and friction drive possible) AA7 extra smooth table top for stenciling Standard Equipment - Ratchet for serial cutting - Motorized height-adjustable blade guide - 4-rail roller table system - Safety protection screen The machine is connected and can be tested onsite. Machine location: Darmstadt Offered only due to internal restructuring. NO LACK OF SPACE; NO DISTRESSED SALE! _____ Our general terms and conditions apply. The seller does not assume liability for typographical or data transmission errors. All descriptions and images were provided by the owner and released for publication. The visual appearance of the items corresponds to their age and the enclosed images. The technical condition and wear of the items offered correspond to their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: used, functionality: fully functional, • Manufacturer: COLLMANN GmbH & Co. Spezialmaschinenbau KG • Manufacturer address (as indicated on the nameplate): Iijdpfx Ajx Iulkjffok Lübeck, Moislinger Allee 222–224, Germany Identification • Machine number: 232521 • Type: Special grinding machine

Condition: used, Year of construction: 1971, functionality: fully functional, 1. Machine Classification • Machine type: Rubber sheet/tread processing machine and winding system • Component designation: “R-Winder 1” 2. Functional Description Iedpfx Aox Iua Ujffeik • Transport of rubber sheet material • Controlled dispensation of rubber compounds and auxiliary lining or interlayer materials • Winding of processed rubber components into rolls suitable for downstream tire production processes 3. Mechanical Structure • Heavy-duty steel frame construction • Surface finish: Industrial green coating 4. Conveying and Material Transport Systems • Wide flat-belt conveyor system for transporting rubber sheets • Overhead mounting points for rolls of lining and interlayer materials 5. Safety Equipment • Yellow safety fence around the operating area • Operator-accessible emergency stop buttons 6. Control and Operation Interface • Local control panel • Integrated display screen • Physical push-button controls • Integrated communication handset Some images show the machine in the condition in which it was still in use. These are provided for presentation purposes only.

Condition: excellent (used), functionality: fully functional, Schon 6100B CE Bridge-Type Die Cutting Press Hydraulic press with front/rear traverse beam designed for cutting various materials from a die (leather, foam, cork, etc.) Very fast and powerful – the machine operates maintenance-free (operator only needs to manage the tooling and material). Technical specifications: - Pressing force: 50T - Working area: 100cm x 65cm - Max stroke: 150mm - Max clearance between ram and table: 177mm Machine equipped with a user-friendly, trilingual touchscreen panel (Polish, English, German) featuring: - Tool zero-point reference - Force adjustment - Table height adjustment after cutting - Automatic/manual operation modes - Cycle counter - Machine error diagnostics Machine in excellent technical condition after comprehensive servicing, including: - Hydraulic and mechanical systems inspection - Oil replacement - Completely redesigned and upgraded electrical system with safety barriers, safety relays, and PLC control panel Price on request. Iisdex Il Hlopfx Affek Assistance with transport organization available.

Year of construction: 2017, condition: ready for operation (used), Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible. Ijdpfx Afex H S N Rsfsik

Year of construction: 2009, condition: good (used), Conveyor belts Arburg, year 2009. Length: 1.4 meters, width: 0.38 m. Iiodpsx Hkqyjfx Affsk

Condition: good (used), - 10 stainless steel silos - Brand: AZO - Previously used for: PVC powder - Condition: The silos have always been stored indoors and are in very good condition. Technical details: • Capacity: 12 metric tons / approximately 7.2 m³ Iedex E U Hcepfx Affsik • Each silo equipped with vibrating discharge base • Each silo equipped with discharge valve (rotary valve) • Provided with pneumatic conveying pipe Price per silo: €4,750 Ex Works, Rotterdam region Payment terms: 100% prepayment before delivery The silos are offered as is, where is, loaded onto truck Single unit purchase possible Available while stocks last The silos will be professionally dismantled by Plastima Used Machinery and partner; after dismantling, they will be ready for collection for your own transport or we can arrange shipping on behalf of Forbo. Collection/shipping can be scheduled between January 12, 2026 and February 16, 2026. If you would like to inspect the silos, we would be pleased to arrange an appointment with you.

Year of construction: 2015, condition: ready for operation (used), This TELSONIC TelsoSPlice TS3-6 P3.6 wire welding sytem was manufactured in 2015. It features a 15" SVGA touch screen, a pneumatic unit, and a 3.6kW WeldHead. The machine includes a barcode scanner, keyboard, and a spacious 2000 x 1000 mm table. Consider the opportunity to buy this TELSONIC TelsoSPlice TS3-6 P3.6 Table. Contact us for more information about this machine. Application Types Iodpox D E A Aofx Affsik Other Plastic Processing Machinery

Year of construction: 2014, operating hours: 78,610 h, condition: ready for operation (used), This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information. Application Types Injection Moulding Iedpfxox D N H Ss Affoik

Condition: good (used), Year of construction: 2021, Automatic machine for the production of PVC tarpaulin covers for tent halls – sold for spare parts. Italian-made welder for tarpaulins by SolarEdge Automation Machines, manufactured in 2021. The machine has seen limited use for manufacturing PVC covers for tent structures. Machine specifications: - Material: PVC with a weight of 450 g/m2 Iiodpfxjx Dk H Te Affok - Material specifications: max. width – 3250 mm, min. width – 285 mm, max. roll weight – 1000 kg, max. external diameter – 600 mm - PVC or PE keder rope with a diameter of 4/5/7 mm - Minimum product length: 1500 mm - Minimum finished product width: 800 mm - Power supply: 400V The machine welds together the surfaces of two material rolls, cuts them to the required width, and thermal-bonds the keder cord to the edges of the material. The machine consists of: - 2 material feeders with automatic material position adjustment - Knives for cutting material to required width - Welding module for joining two pieces of material - Modules for fusing the keder tape to the material edges - Module for feeding and welding the keder cord with automatic tension control - Encoder for product length control - Knife for cutting the product to the set length Welding is performed with high-performance Leister hot air heaters. Components used in the machine: 1. Heaters and blowers by Leister 2. Control systems, electrical and safety components by Omron and Siemens 3. Drives and gearboxes by Seipee and Nidec 4. Pneumatic systems by Festo and SMC 5. Vision system by HIKVISION 6. Linear guides and carriages by HIWIN Machine is only sold as a complete unit!

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,497 h, total length: 1,840 mm, total height: 2,100 mm, total width: 1,270 mm, type of input current: three-phase, overall weight: 1,443 kg, input voltage: 400 V, input current: 32 A, Polyamide based SLS powder raw material. Max printing volume 34x34x60cm H. Loaded parameters : PA2200, Alumide, PA3200GF, PA2241FR. Recoater spring boxes changed at 1.000 wkg hrs. Recoater ( Red III ) changed at 1.200 wkg hrs. 2 printing boxes included. 15kW 7,5 bar Screw compressor + 24kW generato + sand blasting machines included with purchase of 3D printer. Inquire for further details. Iisdexxgr Iepfx Affsk

Condition: good (used), Year of construction: 1997, This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Iiodpoxu E T Aefx Affsk Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

Year of construction: 2002, condition: ready for operation (used), A particle foam molding machine Kurtz is available. Steam chamber clearance: 800mm/1000mm, max. molded part dimensions X/Y: 700mm/900mm, max. mold internal pressure: 5bar, molding materials: E-PP/E-PE. Machine dimensions: approx. 3200mm/3850mm/2650mm, weight: approx. 7200kg. Including accessories. Documentation available. An on-site inspection is possible. Iiodpfxjxuiuds Affsk

Year of construction: 2004, condition: ready for operation (used), A Kurtz particle foam molding machine is available. Steam chamber clearance: 800mm/1000mm, max. molded part dimensions X/Y: 700mm/900mm, max. mold internal pressure: 5bar, molding materials: E-PP/E-PE, number of silos: 2, silo manufacturer: Danz. Machine dimensions X/Y/Z: approx. 3200mm/3850mm/2650mm, weight: approx. 7200kg, control system: B&R SA 4140. Including accessories. Documentation available. An on-site inspection is possible. Iodpoxuit Tofx Affsik

Year of construction: 2015, condition: ready for operation (used), Six heel counter molding machines for the shoe production are available. 1) BSRM-MCF 30, year of manufacture: 2003, stations: 2, cycle time: approx. 15s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 300kg. 2) Guth M-BU-AEZ-KE, year of manufacture: 1999, stations: 2, machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 450kg. 3) International/Mollina & Bianci 3200/C OPT20, year of manufacture: 2003, temperature range: 50°C–200°C, machine dimensions X/Y/Z: approx. 1200mm/850mm/1600mm, weight: approx. 350kg. 4) 2x Sabal 3200/C, year of manufacture: 2006/2014, stations: 2, heating power: 350W, machine dimensions X/Y/Z: approx. 1100mm/800mm/1550mm, weight: approx. 400kg. 5) Ring-Leibrock FFS 34 LT-2, year of manufacture: 2015, heating zones: 4, machine dimensions X/Y/Z: approx. 1350mm/950mm/1750mm, weight: approx. 500kg. An on-site inspection is possible. Isdoxnp Rlopfx Affeik

Year of construction: 1983, operating hours: 100 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 010383, Mixer for PVC, 3 units - Iiedpfxexl E Rvo Affjk

Year of construction: 2004, condition: ready for operation (used), An unpacking and screening station Schkinke Anlagenbau for the 3D printer EOS P3 is available. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1500mm, weight: approx. 300kg. Including build frame. An on-site inspection is possible. Iiedpfxsxltuvs Affsk

Condition: ready for operation (used), A plastic laser sintering unit is available. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1500mm, weight: approx. 300kg. An on-site inspection is possible. Iisdjxltu Aopfx Affek

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 347, Stretch foil wrapping machine Iisdpfexgh Tvsx Affek

Year of construction: 2001, condition: used, functionality: not functional, machine/vehicle number: (H) 96801, Micronisation installation for PVC recycling Iijdpfjxgh E Eox Affjk

Condition: like new (used), As new with many accessories. Iijdpfx Afoxga Sqofek

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6234-05-013, Equipment: CE marking, type plate available, I am offering a used S.M.R.E. (SolarEdge) cutting plotter designed for tracing and cutting acrylic and synthetic fabrics. The machine is equipped with 4 heads, including 3 drag knife heads (2 rotary blades for different material thicknesses, a finger blade) and a plotter pen. Main parameters: Iedpfx Afsxcvt Ajfoik - table width: 3200 mm, - rated power: 8 kW, - supply voltage: 400V, - max. roll diameter: 800 mm, - automatic roll feeder with material guiding correction, - manufacturer's software for pattern design, - vacuum fan for holding down the material on the worktable. The machine is fully functional and still supported by manufacturer's service. It remains connected to power and is in active operation.

Condition: excellent (used), Complete recycling machinery set Iiedpfxsw Spkzs Affek 2x Dynamic washer K K Recycling s 30 Evolution Sand trap with equipment 1x Dynamic washer s 55 Evolution Conveyor belt x 4 Rotary slotted screen Control cabinet

Condition: like new (used), Year of construction: 2017, Laser System Mercury SEI Giotto I-SCAN – used / as-new condition For sale: Mercury SEI Giotto I-SCAN laser machine This system is ideally suited for precise engraving applications in industry and trade. Technical data: Type: Mercury SEI Giotto I-SCAN Laser processing system with I-SCAN technology Iiedpfx Ajw Rp Udsffok High-precision processing of various materials (e.g. plastic, wood, acrylic, paper, textiles, and more) Suitable for engraving Robust construction, reliable operation Condition: as new / fully functional Immediately ready for use, including setup and aluminium frame (programmable sliding table with enclosure – Laser Class 4) Including SICK safety laser scanner Inspection & Test: On-site inspection by arrangement possible. Laser power: 300W Includes Icaro Backlight software

Condition: new, Year of construction: 2024, functionality: fully functional, New UV light-curing units from Dr. Hönle, year of manufacture 2024, still in original packaging. Includes controller and various LED curing lamps for hardening and irradiation. Isdpfx Afsw Ichljfoik Wavelengths: 356 nm and 460 nm, output: 5,000–30,000 W/cm². More detailed information can be found in the attached PDF. 3 packages available, can also be sold separately. -- Please submit your offer price. Sale only within Europe (EU), including Turkey, the United Kingdom, and Switzerland. -- Technical specifications: see handout. Excluding packaging. Any guarantee or warranty is excluded. If you wish to dismantle the equipment yourself, please indicate this in your offer. We assume no liability for the accuracy of the technical data, for the completeness of included accessories or tools, or for the compliance with all safety and environmental protection requirements specified in accident prevention regulations.