Hof GmbH

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: Kedpfx Aeyl Afrsgzswu MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Year of construction: 2023, operating hours: 2,000 h, condition: like new (used), functionality: fully functional, FOR SALE: WINESTEIGER DSG NOTUM MINI EXCAVATOR, YEAR 2023. AS NEW, ANY TEST ACCEPTED. Kwsdeylvz Topfx Agzou

Year of construction: 2025, condition: new, Multirip saw / Edger Max. cutting width 800mm Max. cutting height 90mm Division of cuts freely adjustable Kwedpeyliiwefx Agzou Up to 8 Circular saws possible Laser cutting position marking Perfect for Pallet Production The price is for the Machine only! The roller tables are optional extras and can be made to size and length as required.

Condition: excellent (used), CATALOG NUMBER 7846 TECHNICAL DATA - minimum width of central prism after cutting: 85 mm - minimum length of cut log: 1300 mm - maximum diameter of cut log: 350 mm - shaft diameter: 70 mm - circular saw blade diameter: 500 mm - maximum number of circular saw blades on upper and lower spindle: 4 pcs each - 2 feed speeds + forward/reverse + inverter control - drive motor power (lower spindle): 22.5 kW - drive motor power (upper spindle): 18.5 kW - feed drive motor power: 1.1 kW - track length: 4450 mm - extraction outlet diameter: 3 x 200 mm - 3 rows of detents Ksdjylbm Iopfx Agzjwu - dimensions (L/W/H): 6040x1500x1850 mm - weight approx. 1250 kg ADVANTAGES – Made in Poland, WALTER brand – Complete operating documentation (DTR) – Used machine, in very good condition Net price: PLN 36,900 Net price: EUR 8,790 Net price calculated at 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Year of construction: 1981, condition: ready for operation (used), functionality: fully functional, saw blade length: 6,500 mm, saw blade width: 120 mm, machine/vehicle number: 7283, TECHNICAL SPECIFICATIONS Machine type: ML 1100 Version: Twin band saw (double version) Cutting type: Separation band saw, diagonal cuts possible Band saw blade length: max.: 6,500 mm min.: 6,350 mm Band saw blade width: max.: 120 mm min.: 90 mm Band tension: Pneumatic band tensioning MACHINE DETAILS Manufacturer: Canali KG Maschinenfabrik Machine type: ML 1100 TWIN F.L. 30 H.S. Kwsdpfx Asyk Tqvjgzsu Year of manufacture: 1981 EQUIPMENT Cross and longitudinal conveyors for automatic timber feed and removal.

Year of construction: 2013, condition: excellent (used), Complete HewSaw SL R200SE Plus sawmill line Kodpfxsyk H H De Agzjwu

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg Ksdjyk Hhbspfx Agzjwu ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, functionality: fully functional, The primary breakdown section of the saw line is available for sale. The package includes a Heinola (Ahlström) chipper canter and a quad band saw (BM1500), together with centering, infeed, and outfeed conveyors. The equipment is offered as a complete, fully operational solution. Kwodpfx Aoyka Nrsgzou

Condition: excellent (used), CATALOG NUMBER 7847 Ksdpfx Agsyi T H Ijzowu TECHNICAL DATA - Min. width of center prism after cutting: 70mm - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7756 TECHNICAL DATA - Max. blade diameter: 400 mm - Blade guard - Blade bore diameter: 30 mm - Max. workpiece diameter with 400 mm blade: 130 mm - Motor approx. 5.5 kW - Feed motor: 1.1 kW Kwodjyi Ttuspfx Agzsu - 3 feed speeds + forward/backward - Dimensions (L/W/H): 1500x1300x1300 mm - Weight: 530 kg ADVANTAGES – For palisades – With pointing device – Easy to operate – Occupies little space – Used saw, very good condition Net price: 8,900 PLN Net price: 2,120 EUR depending on exchange rate of 4.2 EUR (Prices subject to change with stronger fluctuations)

Year of construction: 1990, condition: used, functionality: fully functional, A fully functional used Heinola chipper canter with a cant centering conveyor is available for sale. The chipper canter is equipped with two 132 kW electric motors. The brochure is attached to the listing. Kodpfx Aeyikvwsgzswu

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Ksdeyhduyspfx Agzswu Location: Austria, near Graz

Year of construction: 1990, condition: refurbished (used), functionality: fully functional, A fully functional used Heinola chipper canter with a log centering conveyor is available for sale. Kedpfx Agoyg Rukozowu The chipper canter is equipped with two 132 kW electric motors. The brochure is attached to the listing.

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg Kjdpjyg Im Rofx Agzewu ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Condition: used, Mebor VR 900 edger with one mobile saw blade. Kwodpfx Agjygqyyozsu

Condition: good (used), Year of construction: 1993, functionality: fully functional, Hollow tooth sharpening machine, manufacturer AKE Kodpfx Aoydqlwegzewu

Year of construction: 1994, condition: used, Edger line / automatic edger / double edger with measurement and automatic saw blade adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum pass-through width: 1000 mm Maximum cutting height: 120 mm 3 blades in total 2 blades adjustable Measurement system: Combimes with S-conveyor with crosscut saw with Esterer ARS TR infeed with 2-lamella chip separator Can be fully refurbished upon customer request. The plant has already been dismantled and is immediately available. Location: Austria, near Leoben Kwedoyam Iajpfx Agzeu

Year of construction: 1978, condition: reconditioned (used), Planer thicknesser 600 mm, planing width 600 mm, planing height 180 mm, 3-knife cutterhead, cutterhead diameter 125 mm. Fully overhauled, technically sound and ready for operation. New electrical system, all required lubrication points present. Cast iron body, weight 890 kg. Foldable tables, table height adjustable. Grease nipples at all necessary locations. Kedpfxoyabltj Agzswu

Condition: new, Year of construction: 2025, operating hours: 1 h, SPECIAL OFFER !!! Sawmill Viking VBS1100 SB(1) Condition: NEW! Kwodpfxex Uw Emo Agzju Log bandsaw with single-sided bandsaw blades. (Double cut, back and forth, possible for an extra charge!!!) Roller diameter: 950mm Bandsaw blades: double-sided = 160mm wide, single-sided = 140mm wide Feed speed: 0-60m/min. Log diameter: up to 1100mm Cutting length: 6m (up to 9m extension possible, not included) Total weight: 7500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser (video monitoring with surcharge) 22 kW saw motor Infinitely variable feed speed (0 - 60 m/min) Block manipulation: Hydraulic Trimmers, wet grinders, band saw blades, circular saw blades, etc. can also be purchased from Droste Schärftechnik. (Not included)

Year of construction: 2026, condition: new, functionality: fully functional, Technical details: for band saw blades up to 206 mm wide Pressure measurement in bar Positioning through blade displacement Technical details: Kjdpfsx Uw Eaox Agzewu Blade width: bandsaw blades 30 - 206 mm Blade thickness: 0.6 - 2.4 mm Blade length: 4,000 - 11,000 mm Working speed: 4 - 20 m/min. Rated voltage: 3AC x 400V, direction of rotation "right" Frequency converter adjustable in steps Exact hydraulic pressure difference readable via pressure gauge Adjustable pressure lever Levelling roller incl. Anvil for repairing dents

Year of construction: 2025, condition: new, Resaw Horizontal - VIKI 750-80: Saw wheel diameter: 800mm Band saw width: 80mm Max. sawing width: 700mm Max. sawing height: 450mm Min. sawing height: 0,5mm Feeding speed: 0,1 - 20 Meter/minute Motor power: 22kW Feeding Motor: 1,5kW Dimensions: 2500x2700x2200mm Machine weight: 2000kg Blade tension: Hydraulic Kwsdpfx Agjx Uw Dcozju Digital control sawing thickness setting Optional Extras: - Automatic Forward and Reverse Feed - Double Pressrolls - 22kW Frequency converter in separate stand pult

Year of construction: 1993, condition: ready for operation (used), Edging line DK 90 TL In operation until 18.12.2025 Consisting of: Infeed roller conveyor DK90 (incl. various saw sleeves) Slab separator ASV Kjdpfx Ajx Tp Tmegzswu Machine professionally dismantled and ready for loading

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Kwedsx Tpzdspfx Agzju

Condition: new, Year of construction: 2025, functionality: fully functional, Chipper heads for chipper canter sawmachine R200, 250 Kwjdpfxjx I Skdo Agzeu

Condition: excellent (used), functionality: fully functional, power: 72 kW (97.89 HP), fuel type: diesel, overall weight: 5,200 kg, operation weight: 5,200 kg, axle configuration: 4x4, first registration: 02/2011, Year of construction: 2011, operating hours: 10,247 h, Equipment: hammer hydraulics, hydraulics, Hansa APZ 531/SW/Cemetery Excavator/All-Wheel Drive/Tele Arm • Manufacturer: Hansa • Model: APZ 531 • Year of manufacture: 2011 • Operating hours (current): 10,247 hrs • Power: 72 kW / 97 hp • Drive configuration: 4X4 • Earth grabber 760 mm x 900 mm with 9 teeth • Telescopic arm • All outriggers adjustable horizontally and vertically • Rear right outrigger telescopically extendable • Hydraulic breaker circuit • Trailer hydraulics • Trailer hitch for unbraked trailers • Jaw- and ball-type trailer coupling • Hydraulic telescopic boom • Quick coupler • Radio • 40 km/h road approval Kedsx Higyjpfx Agzswu • Gross weight: 5,200 kg • Excellent condition • German machine • Ready for immediate operation • Sale according to §25A (no VAT can be disclosed) • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions (GTC).