Baum Industriemontagen

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 9,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1D/25, year 2005, working direction left/right, consisting of following: - APKV-4/25, combination of inlet conveyor of sealing robot, with glass and frame measuring device and automatic 4-lane kork application machine, year 2005 Lhodpfxsy Ub Swo Adwsg - VFL-1D/25, sealing robot, including options for triple units (2 sealing cycles), , with Beckhoff PC and Lenze servo drives - DOS-1PUD + SID, material dosing for Polysulfide (base 200 litre, catalyst 20 litre) and Silicone (base 200 litre, catalyst 20 litre), year 2005 The machine will be sold as described above, EXW our warehouse in Austria. No further guarantee or warranty given. Available End of May 2026

Condition: excellent (used), fuel type: electric, color: other, mast type: free lift with telescopic boom, Year of construction: 2019, operating hours: 77 h, General information Year of manufacture: 2019 Measures and weights Empty weight: 1.970 kg Dimensions (LxBxH): 293 x 94 x 156 cm Functional Mast: telescopic (3 parts) Mast length: 640 m Lifting capacity: 2.000 kg Clearance lift height: 640 cm Maximum reach: 395 cm CE mark: yes Condition Technical condition: very good Visual appearance: good = Additional options and accessories = Ledpfx Ajy Ub Skedwehg - Beacon(s) - Lifting hooks - Non marking tires = Remarks = General Country of production: Italy

Condition: new, Accessory case for DMG CTX beta/gamma TC. Ledpey Ub Sdofx Adwehg

Condition: excellent (used), power: 85 kW (115.57 HP), fuel type: diesel, color: other, Year of construction: 2012, operating hours: 10,306 h, Equipment: air conditioning, General information Year of manufacture: 2012 Technical information Chassis type: articulated Engine type: John Deere 4045HF286 Top speed: 40 km/h Empty weight: 13.500 kg Dimensions (LxBxH): 694 x 255 x 320 cm Functional Bucket capacity: 2 m³ Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: good = Additional options and accessories = - 3rd hydr. circuit - Blower - Hydraulic quick coupler - Mudguards - Pallet forks - Radio Lhodpfx Aoy Ub Rmedwsg - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIA / Tier III General Country of production: Duitsland Bucket and pallet forks, Hydraulic quick coupler, 3rd function

Condition: excellent (used), power: 88 kW (119.65 HP), fuel type: diesel, fuel tank capacity: 78 l, color: other, Year of construction: 2017, operating hours: 1,820 h, Year of manufacture: 2017 Empty weight: 6.115 kg Carrying capacity: 3.700 kg GVW: 9.815 kg Dimensions (LxBxH): 466 x 200 x 272 cm Engine type: Yanmar 4TNV94CHT-NTBC Lhsdpfoy Ub Rajx Adwjg CE mark: yes Technical condition: very good Visual appearance: good = Additional options and accessories = - Blower - Radio - Rubber tracks - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Japan

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CFS EcoCut Cap 2 | Emulsifier / In-line micro-cut chopper Manufacturer: CFS Model / Type: ECOCUT CAP 2 Serial number: 5000068187 POS 31 Year of manufacture: 2011 Power supply: 400 V / 3 phases / 50 Hz Rated current: 358.5 A Rated motor power: 204 kW Overall dimensions: 3300 × 2050 × 2850 mm Includes a pallet box with parts. The CFS EcoCut Cap 2 is an advanced, extremely powerful industrial emulsifier (in-line micro-cut chopper) manufactured under the CFS brand. This 2011 model is designed for continuous operation in high-capacity production lines, where it is crucial to obtain a perfectly smooth, stable emulsion and maximize the particle size reduction of the raw material. Equipped with a giant 204 kW motor operating at 358.5 A, this emulsifier easily handles the most demanding tasks, ensuring excellent disruption of protein and fat structures. It is an indispensable piece of equipment in the production of high-quality sausages, frankfurters, pates, mortadella, as well as in the pet food industry and in the production of ready meals and sauces. Key features and advantages: - Unmatched power (204 kW): The large power reserve allows for stable, multi-hour operation at maximum throughput, without the risk of overloading the drive, even with very dense product feeds. Lsdpfxoy Ub E De Adwohg - Advanced Micro-Cut system: The in-line cutting system guarantees precise, repeatable cutting and homogenization. It enables the achievement of an ideal degree of emulsification, which improves the binding of water and fat, increasing efficiency and enhancing the texture of the finished product. - Automation and integration: The EcoCut Cap 2 model works perfectly in an automated process line, directly with mixers or kneaders, eliminating the need for manual transport of the raw material and accelerating the production cycle.

Condition: good (used), Year of construction: 2022, Ref. no.: 18635 Manufacturer: SEPRO Type: 5 T25 Year of construction: 2022 Further information: SEPRO S5-25 med – 3-Axis Servo Linear Robot * Manufacturer: SEPRO Robotique S.A.S. (France) * Model: S5-25 med * Year of manufacture: 2022 * Serial number: R015336-02 * Condition: Very good and clean condition * Application: Injection moulding automation / part removal robot Technical Specifications Description Value Robot type 3-axis servo linear robot X-axis (Traverse) 2000 mm Y-axis 700 mm Lhedpfx Adoy Ub Edoweg Vertical stroke 1200 mm Rotation No rotation Payload class approx. 10 kg Control system SEPRO Visual 2 Voltage 3x400V – 3x480V Frequency 50/60 Hz Max. power 1.5 kVA Weight approx. 100 kg Series S5 med Description The SEPRO S5-25 med is a high-performance 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines. The robot is in very good technical and visual condition and comes from a clean production environment. The “med” version is particularly suitable for medical and clean-room applications. The robot has only been used for testing and training purposes. The system offers: * fast and precise movements * reliable servo technology * compact and stable construction * modern SEPRO Visual control system * ideal integration into injection moulding automation systems Suitable for: * plastic injection moulding machines * medical production * clean-room applications * automated pick & place systems * high-speed handling applications

Condition: good (used), Year of construction: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Ledpfxoy Ub D To Adwshg Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Additional information & extras Core pull: 1 pcs Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18621 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Ljdpfey Ub D Hex Adwehg Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18620 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements Lhedpfx Adjy Ub Dyswsg * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18619 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden. Lodpfx Aoy Ub Dtjdwjhg Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität. Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten. Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen. Die wichtigsten Vorteile der IntElect Serie: * Vollelektrische Direct-Drive Servo-Technologie * Sehr geringer Energieverbrauch * Hohe Präzision und Prozesswiederholgenauigkeit * Geräuscharmer und vibrationsarmer Betrieb * Hohe dynamische Servo-Performance * Geringer Wartungsaufwand * Saubere Produktionsumgebung * Ideale Lösung für technische und Präzisionsteile * Geeignet für schnelle Serienproduktionen Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.

Condition: good (used), Year of construction: 2012, Ref. no.: 18610 Manufacturer: DEMAG Type: IntElect 160/520-340 NC5 Year of construction: 2012 Clamping unit Clamping force: 160 ton Opening stroke: 495 mm Distance between tie bars: 520 x 520 mm Mould height min.: 275 mm Mould height max.: 585 mm Platen size (h x v): 760 x 785 mm Injection unit Screw diameter: 35 mm Injection volume: 156 cm³ Shot weight: 139 g Injection pressure: 2180 bar Measurements and weight Dimensions: 5,4 x 1,5 x 2,1 m Machine weight: 7600 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. Ledpsy Ub Dmofx Adwohg The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Machine data: • Manufacturer: Hurco • Model: VMX24i • Year of manufacture: 2021 • CNC milling machine • Control system: Hurco Max 5 • Spindle mount: SK 40 • Spindle speed: max. 12,000 rpm • Working feed rate: max. 38,000 mm/min • Table size: approx. 760 × 510 mm • Travels: X 610 mm / Y 508 mm / Z 610 mm Lhsdpoy Ub Dajfx Adwsg • Tool changer: 30 positions • Machine power: max. 19 kW • Weight: approx. 4,750 kg Condition: • Used (like new), very good overall condition • Machine hours: 2,006 h • Spindle hours: 690 h • Functional and ready for operation Equipment / Accessories: • High-pressure cooling system for coolant supply through the spindle (20 bar) • Cooling air via coolant nozzles or through the spindle • Workpiece positioning detection with 3D probe • Tool measurement with touch probe • Chip conveyor (scraper conveyor) • 2 machine vises • Various collet sets / tool holders SK 40 • Toolbox with workbench and hand vise • Other accessories available upon request The machine can be purchased including the existing accessories (workstation). Price excluding VAT, including all accessories as described and shown in the pictures. Inspection under power possible by arrangement.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Linde / Bitzer | Triple-Compressor Industrial Chiller Technical specifications of the frame: Unit manufacturer: Linde Aktiengesellschaft Model / Type: VHM 316-4521 Serial number: 10309 Year of manufacture: 1993 Refrigerant: R22 Allowable working pressure: 25 / 13 bar Overall dimensions of the frame: 2930 × 830 × 1870 mm Lsdpfx Adjy Ub A Nswjhg Specifications of the installed compressors (3x Bitzer Kühlmaschinenbau GmbH): Power supply: 380–420 V (50 Hz) / 440–480 V (60 Hz) – 3 phases Maximum operating current: 24 A (per compressor) Volumetric capacity per unit: 42.3 m³/h (for 50 Hz) / 51.0 m³/h (for 60 Hz) Total volumetric capacity of the unit: 126.9 m³/h (for 50 Hz) / 153.0 m³/h (for 60 Hz) Protection class: IP 54 List of compressors in the section: Compressor no. 1: Type S4G-12.2 Y Serial number: 15851279 Compressor no. 2: Type S4G-12.2-40P Serial number: 1676905728 Compressor no. 3: Type S4G-12.2-40P Serial number: 1678210359 Industrial central multi-compressor unit (so-called "compressor pack") built by the German Linde Group based on three two-stage, semi-hermetic Bitzer reciprocating compressors from the S4G series. This type of system is designed to power low-temperature installations – freezers, freezing tunnels, and advanced refrigeration systems in food processing plants (meat, fish, bakery). The design based on three identical units allows for very flexible, three-stage cooling capacity management (in steps of 33%). The system automatically activates the appropriate number of compressors depending on the actual thermal load, which optimizes energy consumption and extends the service life of the components. The entire unit is mounted on a compact support frame, which facilitates installation. Key features: - Reliable Bitzer two-stage compressors: The two-stage compressor series is specifically designed for deep freezing. It ensures stable operation at very low evaporation temperatures and is characterized by a high energy efficiency ratio. - Safety and automation of the Linde frame: The industrial design of the frame integrates a common suction and discharge manifold, an advanced oil equalization and separation system, and the necessary control and measuring equipment (protective pressure switches), which effectively protects the system from failures. - Industrial protection class (IP 54): Hermetic electrical boxes and the compressor design protect the system from moisture and dust, allowing for safe operation in harsh machine room conditions. - Application versatility: The unit is factory-designed to operate with R22 refrigerant. Due to the presence of compressors with the "Y" designation (filled with ester oil), the system can be successfully adapted to work with modern, environmentally friendly alternatives from the HFC group (e.g., R448A / R449A / R404A / R507) after a standard verification of seals and automation settings.

Condition: excellent (used), 1 used, very well-maintained universal milling head system "HURON" with hydraulic tool clamping Manufacturer: SEMPUCO, Origin: Germany Model: KFU 2/45 Technical data: Spindle mount: SK 50 Max. speed range: 3150 rpm Max. drive power: 15 kW Weight: approx. 180 kg Accessories / Special features: • 2 manual swivel table systems "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling machines (e.g.: UNION, MTE, LAGUN, CORREA, ZAYER, CME, AYCE, SACEM, JUARISTI, ARSENAL, ...) or boring machines of any kind. This high-quality milling head was used as a loaner milling head and was only used for repair purposes while the other milling head was being repaired and overhauled. Lhsdpfx Aoy Uby Ijdweg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: SN 6340, functionality: fully functional, power: 13.5 kW (18.35 HP), type of input current: three-phase, travel distance X-axis: 3,800 mm, travel distance Y-axis: 4,350 mm, travel distance Z-axis: 400 mm, Equipment: CE marking, documentation/manual, Work table 3,600 mm x 2,000 mm CAD/CAM software EasyStone CNC control unit OSAI Series 10/510S 4 tool magazines, each with 26 slots (total of 104 magazine slots) 1 set of vacuum cups Vacuum pump, 160 m3/h Plate scanning Including tools and mandrels (SK 40) Lhodpoy Ubyuofx Adweg Main spindle replaced in 2025 Space requirement: approximately 7,000 x 7,000 mm (width / depth)

Condition: used, mileage: 10,000 km, power: 290 kW (394.29 HP), first registration: 10/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: silver, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, ACTROS 18.400 Car transporter / Breakdown assistance vehicle Flashing beacon The vehicle can be taken over for driving assignments to Ulm / Bursa, Turkey if a suitable trailer is available upon request. Lhedpfx Adjy Ubxqowsg Special equipment: Axle load - measuring system, Trailer Stability Assist (TSA), Trailer socket 12V / 13-pin, Audio system: Digital radio DAB / DAB+, Equipment package: Air conditioning, Equipment package: Safety (without roll stabilization), Brake connection standard and DuoMatic, CB radio, Interactive multimedia cockpit, Air horn, Driver assistance system: High beam assist and cornering light, Cab: with air suspension, Windscreen tinted with sunstrip, Transmission 12-speed - Type: G 211-12, AdBlue tank: 75 L, Electric sunroof, Upper comfort bunk, wide, Fuel tank: 390 L aluminum, left side, Additional fuel tank: 290 L aluminum, right side, Coolbox / refrigerator, Radiator grille, Two-cylinder air compressor, Enhanced engine brake, Wheelbase variant 4300 mm, Frame overhang 1800 mm, Smoker package, Rain sensor, Tire pressure monitoring system, Spare wheel, Additional remote control keys (2), Drawers under console, Seat cover/upholstery: Front passenger seat velour, Seat cover/upholstery: Driver's seat velour, Cab seats: Driver comfort air suspension seat, External sun visor, Side window sunblind, driver’s door, External storage flap left, Additional 12V power socket, 24V / 25 A socket in front passenger footwell, Additional 24V socket in front passenger footwell, Carpet covering on engine tunnel, Cab door extension, Sleeper cab curtain, Seat belt warning device Additional equipment: EURO 6 emissions standard, Overhead storage above windscreen with cover, Axle configuration: 4x2, Front axle load 7.5 t, Actros 5, Actros L cab, Heated maneuvering/front mirrors, 2-line trailer brake, Connections on left, Trailer socket 24V / 15-pin, Exhaust to right side, Powertrain 2 package, MirrorCam external mirror cameras, Batteries positioned side by side, Rear axle differential lock, Air connection in cab, Steel air tanks, Air unit with condensate monitoring, Medium air unit, Automatic headlight activation (light sensor), Driver assistance system: Attention Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency brake assist (Active Brake Assist 5), Driver assistance system: Lane keeping assist, Cab: fixed entry step, Cab: Chrome interior package, Cab: hydraulic tilting device, Cab: L ClassicSpace, 2.30 m, tunnel 320 mm, LED perimeter lighting, Suspension: leaf/air, Front suspension 7.5 t, 2-leaf, Electric window lifters, No rear window, Alternator 100 A, regulated, Speed limiter, Rear axle with active lubrication, not regulated, Rear axle ring gear 440, Chassis/body: chassis, Lower comfort bunk, Central locking system, Electronically regulated steering pump, Multifunction steering wheel, Heated air dryer, Engine 10.7 L - 290 kW R6 diesel (OM 470), Engine variant OM 470, Application: regional/short-haul, Wheelbase undefined, Ramp mirror, Residual heat utilization, Disc brakes front and rear axle, Remote control keys (2), LED flashing side marker lights, Cab seats: passenger function seat, Cab seats: driver seat backrest foldable, Front splash guard, Front axle stabilizer, Lockable compartments behind driver and passenger seat, 12V socket in passenger footwell

Condition: new, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, emission class: euro6, color: white, number of seats: 22, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, MAN TGE stock vehicle available immediately Base vehicle used in the package for €72,990.00 incl. ADA systems, Model Year 2025: - 5.160 = 163 HP / Euro 6E - Length: 7,334 mm (L 4) - Permissible total weight: 5,000 kg - Wheelbase: 4,490 mm - Tires: 205/75 R 16 C 115/113 - Roof-mounted flashing lights at rear (school bus indicators) - Front air conditioning Climatic - Daytime running lights with assist functionality - Exterior mirrors electrically adjustable and heated - Fog lights incl. cornering light - MAN Media DAB+ premium radio - Comfort seat with seat heating - Cruise control - Intelligent speed assistant - Reversing camera - Front and rear parking sensors - Fatigue detection - Emergency braking assistant Lodjy Ubxkopfx Adwjhg - ESP and ABS with electronic differential lock - Traffic sign recognition - Active lane keeping assistant - Crosswind assist - Fatigue detection Lord Light Equipment Package for €72,990.00 includes: - Phonic and thermal insulation - Electric sliding door with electric entry step - 21 sleeper seats + original passenger seat + driver seat (optionally 18+1+1 seats) - Optional 3/1 standing places - Webasto/Diavia Model RT 145 passenger compartment air conditioning - Front air conditioning = dual climate control - Night lighting in orange and white - Convector heating left and right - Flattened entry area - Seats with synthetic leather headrests, reclinable, optionally with yellow grab handles on the aisle-side seats and 3-point seat belts at all positions - VIP Black double-glazing - Roof hatch Optional rear extension = +8 weeks added production time + €8,000.00 More options available on request 24 months MAN warranty with no mileage limit, or for low-mileage users 48 months up to 80,000 km 12 months warranty on conversion (excluding supplier parts with deviating warranty terms). Net export possible.

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, brakes: retarder, number of seats: 22, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 517 – order vehicle Base vehicles available in various configurations (including full equipment and Sprinter 519). Example of base vehicle configuration: - Front air conditioning system Tempmatic 7 kW - Hot water auxiliary heater with timer 5 kW - Multifunction steering wheel, adjustable for height and inclination - Heated driver’s seat - Storage compartment above the dashboard - Parking package with reversing camera - 9-speed automatic transmission - Fog lights - Optional LED headlights Vehicle has GSR 3 systems: e.g. - Driver Comfort Package - Reversing camera - Blind Spot Assist - Turn Assist - MBUX 10 inch (radio with Bluetooth, Apple CarPlay, touchscreen) - Tire pressure sensors - Attention Assist - Active Lane Keeping Assist - Traffic Sign Assist - Intelligent Speed Assist Ledpfoy Ubxdsx Adwjhg - Distance Assist - Rain sensor - Electric exterior mirrors - Cruise control Vehicle modification: - Length 7867 mm due to rear extension without visible seam - Large electric door with recessed step (optionally also double-width or positioned at the front) - Webasto / Diavia 12 kW air conditioning system - Luggage compartment on the left - Side windows, double-glazed, black tinted - Flooring by Gerflor in wood look (other options available upon request) - 21 sleeping seats with seat covers according to customer's choice within our sample range - Multi-level interior lighting - Bumper painted in vehicle color upon request - Optional trailer hitch Modifications such as refrigerator, DVD, trailer hitch, etc. can be carried out optionally. Net export possible. This is an example vehicle with example images (some of which show optional extras). This vehicle is not in stock. The delivery time is approximately 3 months. Comparable vehicles can be viewed upon request.

Condition: used, Year of construction: 1953, number of beds: 16, color: beige, first registration: 07/1953, total length: 8,000 mm, total width: 2,300 mm, total height: 2,800 mm, axle configuration: 2 axles, overall weight: 3,500 kg, Kässbohrer PA 4 passenger trailer This vehicle was built by Fahrzeugwerke Karl Kässbohrer as a passenger trailer. In 1960, the transportation of people in trailers while driving was banned. These trailers were therefore scrapped or simply put in the corner. Due to the short period of time in which the trailers were allowed to be used, this material was used very little. This example has been completely restored by us. The body is made of aluminum. Conversion to caravan / bistro trailer / trade fair trailer Club corner for 8 people 4 seats at dos a dos table refrigerator stove 220 volt sink Fresh water tank Lhodpjy Ubw Tsfx Adwjg Gray water tank 2 circuit air brake Permissible total weight 3500 kg Unladen weight 3200 kg Length 8000 mm Width 2300 mm Height 2800 mm - Rental possible for your event. Delivery throughout Europe with our. Car transporters possible. Net export possible.

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 22, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 517 Sprinter Lord Comfort available for short-term delivery multiple times With GSR3 systems in arctic white. Lsdpfx Adjy Ubw Hswohg Base Vehicle: - 125 kW Euro 6e engine - 9-speed automatic transmission - 7 kW front air conditioning + 12 kW Webasto air conditioning in passenger compartment - Auxiliary heater - Driver’s air-suspended seat with seat heating - Roof-mounted signal lights - Driver comfort package - Length: 7,336 mm - Reversing camera and PDC front and rear (parking package) with front camera - Blind spot assist - Turn assist - MBUX 10-inch (radio with Bluetooth, Car Play, touchscreen) - Tire pressure sensors - Attention assist - Active lane-keeping assist - Starting information assist - Intelligent speed assistant - Distance control assist - Rain sensor - Electric exterior mirrors - Cruise control Conversion: - Thermal and acoustic insulation - Electric exterior swing door with recessed entry step - 22 +1 passenger seats / sleeper seats - Total capacity: 22 passengers + driver (+ optional standing places); Reduction to 19+1 possible on request - Black VIP double glazing - Convector heating in the passenger compartment - Roof hatch - Simple luggage rack on the left - Webasto air conditioning in passenger compartment 10 kW - Interior lighting in white/orange in the passenger area - USB sockets at every row of seats - Curtains - Add-on parts painted in body color - Last seat row can be moved forward when removing the second-to-last row (luggage compartment) or for wheelchair preparation - Up to 3 wheelchair spaces possible on request Net export possible. We ship worldwide.

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: automatic, number of seats: 1, total length: 7,336 mm, total width: 2,001 mm, Year of construction: 2025, Equipment: air conditioning, central locking, had accident, parking heater, soot filter, Sprinter 519 4x4 with M3 Preparation Optional partition wall and choice of single or double passenger seat can be supplied upon request. 4 identical vehicles available Special equipment includes: - Active Distance Assist DISTRONIC - Exterior mirrors without integrated indicator - Front side indicator lamps - Omission of load compartment/sliding door - Tachograph controls located front under headliner - No passenger side airbag - No load compartment partition wall - No seat in cab, right side - No lashing eyes - Exterior noise reduction features - Speed limiter set at 100 km/h - Grab handles on A-pillars - Partial LED rear lamps - Hold function - Interior: instrument panel air vents - Flip lid for storage compartment - Dashboard charging package (additional USB ports and 12V socket) - Cable duct at rear portal - Cable duct on sidewall - Heated steering wheel - Fog lights with cornering function - Programmable special module - Park package with reversing camera - Interior rearview mirror - LED High Performance headlights - Rear and front mud guards - Driver’s seat heated - Driver’s seat with lumbar support - Comfort suspension seat for driver - Low seat base for driver’s seat - Rear door step - Rear underride guard - Cab heat insulation - Additional electric auxiliary air heater - Additional water heater Additional features: - 3rd brake light - Overhead storage above windscreen - Storage compartment below passenger dashboard - Adaptive brake light - Driver airbag - Acoustic package - Hill-start assist - Towbar wiring - trailer socket electrics - Power folding exterior mirrors - Electrically adjustable & heated exterior mirrors (both sides) - Blind spot assist for exterior mirrors - Outside temperature indicator - DAB tuner (digital radio) - Load compartment ceiling light with door contact - Automatic headlight activation - Rear right entry grab handle - Grab handle for sliding door at partition wall - Safety assist: turning assistant - Safety assist: active brake assist - Safety assist: active lane keeping assist - Safety assist: start info assistant - Safety assist: Attention Assist (drowsiness detection) - Safety assist: Intelligent speed assistant - Safety assist: breakdown management - Safety assist: crosswind assist - Digital tachograph - 250A alternator - 9-speed GTronic automatic transmission - Rear doors (opening angle 270 degrees) Lhjdpoy Ubwyefx Adwog - Body/type: high roof box with extended rear overhang - Instrument cluster with color display - Communication module (LTE) for digital services - Main fuel tank: 93 litres - Steering column adjustable (manual) - Multifunction steering wheel - Truck registration (N1 category) - Side marker lights - Mercedes-Benz emergency call system - Engine: 2.0 L – 140 kW CDI Euro 6 - MBUX multimedia system (10.25" touchscreen) - 4325 mm wheelbase - Tyre pressure monitoring system - Reversing camera - Euro VI emissions standard - Windscreen wipers with rain sensor - Seatbelt warning system (driver and passenger side) - Fabric seat upholstery - Engine start/stop system - Mid-dashboard USB charging port - 92 Ah AGM battery - Navigation pre-installation (for MBUX) - Remote Service Plus pre-installation - Heat-insulating glass (windscreen with top band filter) - Permissible gross weight: 5.2 t - Rain sensor We can...

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, number of seats: 30, gearing type: automatic, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, New vehicle without registration, available for immediate delivery with automatic transmission, double glazing, and auxiliary heater! 8 x facelift model The ideal school bus or small group minibus for those on a limited budget. Built for Germany with double glazing, auxiliary heater, and a 24-month warranty (optionally extendable). 29 sleeper seats with folding tables ----General vehicle data: Lhjdoy Ubwtepfx Adwog * Length: 7,168 mm * Width: 2,262 mm * Height: 3,352 mm * Wheelbase: 3,350 mm * Front/rear overhang: 1,613 mm / 2,205 mm * Turning circle diameter: 12,200 mm * Passenger capacity: 29 + 1 * Permissible total weight: 8,160 kg * Diesel tank capacity: 160 l * AdBlue tank: 12 l Drivetrain: * Type: E6 MFTBC 4P10-HAT4 (Mitsubishi) * 4-cylinder in-line engine * Automatic transmission * Emission standard Euro 6e * Displacement: 2,998 cm³ * Power: 110 kW / 150 hp at 3,500 rpm * Max. torque: 370 Nm at 1,320 rpm * Engine compartment fire suppression system Braking system and safety features: * Disc brakes * EBS (Electronic Braking System) * ESP (Electronic Stability Program) * ABS (Anti-lock Braking System) * ASR (Traction Control) * AEBS (Advanced Emergency Braking System) * LDWS (Lane Departure Warning System) Climate control / heating / ventilation: * Safkar roof-mounted air conditioning * Convector heaters on side panels * 1 roof hatch, manually operated * Additional Eberspächer heating unit Doors: * Door 1: single-leaf at front * Door 2: single-leaf at rear * Electrical control Accessories: * Fire extinguisher 1 x 6 kg * First aid kit * Emergency hammer Our company has been in the market for 35 years. You can inspect and test drive the vehicles with us. You will be welcomed at our operational premises—not in some parking lot, and our business address is not a mailbox at an apartment building. Those mailboxes usually disappear after a few months.

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 9, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Sprinter 315 Tourer! Extra Wide VIP Seats Lodsy Ubwmopfx Adwohg Stock vehicle available for immediate delivery. Year of manufacture: 2025 with latest assistance systems 1 unit in white - Wheelbase: 3,665 mm - H2 high roof - Front passenger single seat - Vehicle equipped with airline track system and 7 individual seats (as shown in the pictures) Seats can be reversed, with armrests on the left and right, 520 mm seat width plus armrests - Radio with 10-inch display - Front and passenger compartment air conditioning with double compressor - Convector heating - Luggage rack on the left - USB ports at every seat row - Multi-stage ambient night lighting - Electric sliding door - Electric entry step - Double glazing with dark tint Base vehicle includes: front air conditioning, 9-speed automatic transmission, comfort driver's seat, parking sensors with rear-view camera, alloy wheels. Price per vehicle: €73,990.00 plus 19% VAT. Optional extras such as wheelchair ramp or lift available on request. Net export possible.

Condition: used, mileage: 478,000 km, power: 353 kW (479.95 HP), first registration: 07/2007, fuel type: diesel, number of seats: 8, gearing type: automatic, emission class: euro4, color: blue, brakes: retarder, Year of construction: 2007, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), onboard kitchen, parking heater, soot filter, Starliner 2 with motorhome conversion / conference bus. C or D driving license required. Lodpfoy Ubwgex Adwjhg Length: 11.98 meters – the only Starliner 2 with this length. Height: 3970 mm. Unladen weight: 17 tons. Permissible total weight derated to 19,000 kg. 8 seats including driver - Solar system: 14 modules of 155 W each = 2.17 KWp - Standalone air conditioning / auxiliary heating - 4 x 200 Ah batteries - 2 solar charge controllers of 100 A each - 4000 Watt inverter - 70 A battery charger - 2 x 30 A bi-directional chargers - Diesel generator 480 HP MAN, ZF AS Tronic 12-speed Net export possible