Handl Maschinen GesmbH & Co KG

Condition: used, CNC machining center Manufacturer: SCM Type: Morbidelli Author 430S Year of manufacture: Technical data - Working area: 1300x3600x180 mm Bodpjz Inkbefx Afgowu - Equipped with a milling spindle, drilling unit, and saw - Horizontal machining units - Original SCM software - The machine is in good working order. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1998, I sell the 3-axis CNC working centre Biesse Rover 13S with beam table, year 1998. Configuration: Bjdpfxsz Ii Axj Afgjwu 3-axis main spindle HSD 1 grooving saw X-direction Drilling head 10+4+2 spindles Useful working area 1540x1050mm. 1 working field, 2 clamping areas Total power 10kW Pump Becker Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately.

Condition: good (used), Year of construction: 2004, machine/vehicle number: 0-201-24-7426, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 410 mm, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag PC85, actuation type: electric, total length: 6,500 mm, total width: 2,500 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, CNC Homag machine primarily for stair construction. Working area: 6000 x 1200 x 410 mm. 5-axis machine. Tool changer with 18 tools. Number of clamping consoles: 10 pieces. Two vacuum pumps. Bwedpfxjz H Rp De Afgou

Condition: good (used), Year of construction: 1997, functionality: fully functional, 4-AXIS CNC MACHINE FROM A PART-TIME JOINERY, VERY GOOD CONDITION Workpiece dimensions max.: Bedpfsz H Na Ijx Afgowu Length 3,000 mm Width 1,050 mm Thickness 60 mm with standard clamps 120 mm with clamping templates (customer-supplied) 2 clamping stations for machining 2 identical workpieces, resulting in halved changeover times 6 clamping consoles with tubeless vacuum guidance 12 vacuum suction cups Machine zero point at the front left Chip conveyor belt Main spindle 7.5 kW, HSK 63 F S1 incl. stepless speed control 1,500 - 18,000 RPM C-axis for main spindle Tool changer magazine, 12-position, mounted on the support and moving with the X-axis Drilling head, 17 spindles, vertical, 7,500 RPM Spindle spacing 32 mm Drilling head, horizontal, 4 spindles Control system: ----- HOMATIC NC 83 Operating system OS-9 with WINDOWS interface WOODWOP 4.5 Connection values: 380 V / 50 Hz Control voltage: 220 V 50 Hz Additional accessories: ----- Anti-slip mats in front of the machine Adapter unit for saw with 2 outlets Maintenance performed: - Main spindle completely overhauled in 2019, since then max. 100 hours of use - X-axis bearings completely new - Water hoses partially replaced - New vacuum pump Becker - Cooling unit for main spindle new

Condition: used, Year of construction: 2012, Masterwood Project 455 CNC machining centre with tools ----- Technical specifications to follow ----- Price of the above machine on enquiry! ----- (Technical specifications as per the manufacturer – subject to change!) All prices quoted are net, plus statutory VAT. Bodsz Hz Iwopfx Afgewu Translated with (free version)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Working area X: 3855 mm Working area Y: 1650 mm Z-axis workpiece clearance: 245/290 mm 5-axis electrospindle, HSK F63 mounting Main electrospindle power: 16 kW Drilling spindles for vertical drilling: 5 Drilling spindles for horizontal drilling X: 2 Drilling spindles for horizontal drilling Y: 2 22-position chain-type tool changer Work table with 8 rails Automatic EPS tables Software: Biesse bSolid Vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety guards Safety device compliant with CE standards, with impact bar and double light curtain Approximate weight: 5800 kg Only 2774 operating hours Includes Uniclamps for window and door frames Available immediately Bsdez Hxmqjpfx Afgswu

Condition: ready for operation (used), Year of construction: 2020, For profitable performance. For individual furniture production. For industrial requirements. The profit H80I CNC machining center is an integral part of the intelligent F4®Solutions production process, which will be the only answer to the expectations regarding profitable furniture production in the future. The profit H80 center for cutting, drilling, and milling panels enables highly efficient furniture 4.0 production, guaranteeing a secure future for furniture and woodworking companies. Completely dimensioned furniture components, including all holes, grooves, and joints, will be produced with a single clamping operation at the push of a button. The latest nesting technologies ensure the highest possible material and time savings. The profit H80I can be flexibly expanded, even to a fully automated version, through various loading and unloading solutions, allowing for maximum throughput. Bsdez Hkiwspfx Afgswu With F4®Solutions, a seamless, efficient, and economical production process will be created, taking into account each individual furniture component. Tools in the form of software for extreme efficiency are part of the entire production chain. Simple design of original furniture in a familiar CAD environment. Photorealistic rendering supports communication with the customer through 3D visualization. Accurate transfer of files to all integrated machines, including economical nesting optimization. Even the final assembly of the furniture takes place with the support of clear assembly drawings and 3D files – this is 4.0 for crafts and industry. » Automation solutions FORMAT4. Uncompromising competence for the highest requirements. The premium brand from Felder Group has been meeting the highest requirements of professional users since 2001. Tailor-made, high-performance solutions are uncompromisingly innovative, offering maximum ease of use and the highest efficiency. drilling/milling head, nesting software for this, a slatted table with dimensions of 2 meters wide and 3 meters long, automatic unloading, and chip blowing. Number of operating hours: 10,000 only.

Condition: ready for operation (used), Year of construction: 2004, IMA Bima 210 Year of manufacture: 2004 Milling area: 3000 x 1200 C-axis Liquid-cooled milling motor Drilling unit Vacuum pump 6 supports Schmalz vacuum cups HSK 63-F Saw unit Bjdpfx Afoz E U A Sogowu Machine in good condition Angled unit Available at the end of December 2026

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, spare drive components, and an Extract DUO two-bag dust extraction system. The machine has low operating hours and has been serviced annually by an authorized dealer. The machine can be inspected while in operation. The sale price includes professional disassembly and loading onto a truck for transportation. The buyer is responsible for arranging and covering the costs of transportation. Bwodez E Rinopfx Afgsu Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part and an additional 8 on the fixed part Technical specifications of the included dust extraction system: Fan power kW: 5.5 Filter surface area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Airflow rate m3/h: 6000

Condition: used, Year of construction: 2011, CNC machining center Manufacturer: Homag Type: BMG311 Venture 316L Year of manufacture: 2011 Technical data - Design: 5-axis CNC machining center - X-axis travel: 4,200 mm / 4,375 mm (with hole diameter 25 mm) - Y-axis travel: 1,400 / 1,550 mm (limitation in drilling operations) - Z-axis travel: 250 mm - Workpiece thickness: up to approx. 250 mm - Cantilever table: 8 cantilevers, LED positioning aid - Vacuum: 2 vacuum pumps, 100/140 m3/h and 90/108 m3/h - Main spindle: 5-axis, 10 kW Drive5C - Speed: 1,500 - 24,000 rpm - Tool holder: HSK 63 - Tool changer: 18 positions - Drilling head: 21 spindles, V17/H4/S0/90, 2.2 kW - Control system: powerControl PC85 Bwjdpfx Ajz E Hpdsfgou - Software: WoodWOP 6.1 - Monitor: 17" TFT - Operating system: Windows XP Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2011, functionality: fully functional, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, For sale is a HOMAG BMG 311 Venture 316 L CNC machining center manufactured in 2011. The machine is currently in operation and can be inspected and tested while powered on until its availability in November 2026. A video of the machine in operation is available; see the advertisement or YouTube. Equipment: * HOMAG BMG 311 Venture 316 L * Year of manufacture: 2011 * Control system / Software: WoodWOP 6.1 * Tooling will NOT remain on the machine * Vacuum pump included * Currently powered on and operational * Inspection and test run possible until November 2026 The machine is suitable for the professional CNC machining of wood-based materials and, due to its extensive equipment, is immediately ready for further use in production. A detailed functional test on-site is possible by arrangement. Availability: from November 2026 If you have any questions about the machine, require further technical data, images, or would like to arrange an inspection appointment, please do not hesitate to contact us. Contact: Dennis Bitzigeio Company: BIMA Maschinen & Zubehör Bodpoz Ek Htofx Afgswu

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Bwedpsz Ekfvjfx Afgsu Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: good (used), Year of construction: 2002, functionality: fully functional, 3-axis machine Working area: X-axis: 3,000 mm Y-axis: 1,200 mm Height above the top edge of the suction plate: 100 mm 6 work piece supports, each with 2 tubeless vacuum suction cups, each with 1 rear and 1 front work piece stop 1 work piece stop in the Y direction (left and right) 4 lifting rails for placing heavy work pieces, automatically lowerable 1 vacuum pump, 100 cbm/h Machining units: Main spindle, 5 kW Speed: 1,500 - 24,000 RPM water-cooled Rotation direction: left & right Automatic tool magazine with 8 positions moves directly along with the milling spindle for milling tools only Vertical drilling unit with 14 spindles Spindle spacing: 32 mm All spindles can be controlled individually Speed: 6,000 - 9,000 RPM Horizontal drilling/sawing unit Bwedpfx Afsz D A Rbegeu 4 spindles Feed stroke: 80 mm Drilling diameter: max. 12 mm Grooving saw diameter: max. 125 mm Unit can be swiveled 0 / 90 degrees Control / Software IMAWOP 5.0

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (software IMAWOP) Max useful working area (without edge banding process) mm 6100 x 2000 x 125 Bwedpfx Afoz Dtudsgju Max useful working area (edge banding process) mm 3100 x 1925 x 100 (panel thickness) No. 10 movable rails (supports) 6 x length mm 1400, + 4 x length mm 1450 LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pump, capacity 140 m3/h) Clamps for workpieces fixing Safety side metal grids and front emergency carpets Motorized carpet to evacuate chips and wastes Separate electric and command cabinet No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) Banding group on board - (Y AXIS) Glueing Unit (P.U.R. Glue + Quick Melt unit) VT 100/100 with NORDSON premelter Edge coils supporting unit (No. 2 reels) OPTIONALS: N° 1 Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles N° 1 Circular saw (diam. mm 200) N° 1 Combined unit: Corner rounding / Edge scraping (with glue scraping extension)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working area X: 3280 mm Working area Y: 1320 mm Working area Z: 170 mm 13.2 kW electrospindle Bwjdpfxoz A Iglo Afgju Drilling heads for vertical drilling: 10 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 Blade for grooving in the X direction 12-position revolver tool changer Work table with 6 rows Programming software: BiesseWorks 90 m3/h vacuum pump Safety mats Protective netting Approximate weight: 3000 kg Door and cone grooving unit with ISO30 connection available at an extra cost.

Condition: used, Year of construction: 2014, power: 6.6 kW (8.97 HP), travel distance X-axis: 3,681 mm, travel distance Y-axis: 1,655 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,252 mm, workpiece height (max.): 180 mm, number of axes: 3, Equipment: CE marking, documentation/manual, F11 Drilling Unit Includes: 7 independent vertical spindles (4 on the right and 3 on the left) Drill chuck M 10 / diameter 11 mm Distance between spindles 32 mm 2 double horizontal drilling heads (1+1), 1 in X and 1 in Y (drill chuck M8 / diameter 9 mm) Drill speed 4000 rpm 1 integrated saw blade in X direction (max. diameter 120 mm) Saw blade speed 5000 rpm Motor power 2.2 kW Vertical travel with pneumatic release of the entire unit 250 mm Vertical travel with pneumatic release per spindle 60 mm Bodpfx Afjz Aubxjgjwu Extraction hood all around 6.6 kW – 9 HP electric spindle Includes: Tool holder HSK F 63 Speed 1500 - 24000 rpm Motor power (S1/S6) 5.5/6.6 kW (7.5/9 HP) from 12000 to 18000 rpm Right and left rotation Static inverter for stepless speed adjustment and immediate stopping of rotation Extraction hood all around Tool changer TR10 10-position lateral tool changer for tools and angle gearboxes Central lubrication with manual pump Vacuum pump, output 90/108 m³/h at 50/60 Hz 8 TVF work tables and 18 interchangeable vacuum suction cups 120x120 mm Second set of stops Laser device for positioning the suction cups

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Working area X: 3855 mm Working area Y: 2650 mm Bsdpfx Ajz Atb Rsfgjwu Working area Z: 200 mm 5-axis electrospindle Vertical drilling heads: 29 Horizontal drilling heads X: 6 Horizontal drilling heads Y: 4 Saw blade for grooving in the X direction 33-position chain tool changer Worktable with 6 stops 250 m3/h vacuum pump, manufactured in 2023 Software: BiesseWorks and NC-Hops Direkt installed Chip conveyor belt Safety mats Protective nets Approximate weight: 6300 kg. Only 2572 hours on the 5-axis spindle and 1488 hours on the drilling unit.

Condition: used, Year of construction: 2021, machine/vehicle number: 20118-0004, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 250 mm, number of axes: 3, number of slots in tool magazine: 6, total height: 2,100 mm, total length: 3,900 mm, total width: 2,150 mm, overall weight: 2,900 kg, For sale: a very well-maintained and complete Comeva Nicron Vacuum Bars 13/32 CNC machining center, manufactured in 2021. Bodpez Af Susfx Afgswu This machine is ideal for flexible interior designers, furniture makers, or door specialists. Thanks to the generous working area of 3,200 x 1,300 mm and the adjustable beam table with vacuum cups, you can work quickly and precisely with solid wood, sheet materials, or frame/door elements. Highlights of this machine: - Beam table: Ergonomic and quick to adjust for various workpiece sizes. - Powerful main spindle suitable for heavy milling work, grooving, and a drilling unit. - Automatic tool changer: 6-position tool magazine for fast cycle times. - Reliable vacuum system: Includes a high-quality Becker vacuum pump. Compact setup: Freestanding control cabinet on wheels with clear controls. Equipped with Pegasus software. The machine is located at a customer's site and can be viewed in operation; location: Staphorst, the Netherlands.

Condition: ready for operation (used), functionality: fully functional, Operation in X, Y, Z axes Horizontal drills on X-axis – 10 pcs Bwjdpezz Nk Ssfx Afgsu Horizontal drills on Y-axis – 2 pcs Vertical drills on Y-axis – 14 pcs Vacuum pump 3 kW Capability for dual-field operation 6 beams Milling unit 2 work zones 3000 kg Year of manufacture: 1992

Condition: used, Year of construction: 1999, - 4-axis machine Bedpfxozz Izio Afgswu - Support table 2800 x 1050 mm - Main spindle 7.5 / 9.0 kW - with drilling head and slotting cutter

Condition: excellent (used), 4-axis machining center work area: 3200 x 1350 mm Bwedpfjzzd S Dox Afgeu automatic tool changer

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: 6800 mm Working area Y: 1840 mm 19.2 kW electrospindle with C-axis, 360-degree interpolating torque Number of vertical drilling heads: 30 Number of horizontal drilling heads X: 6 Bjdpfezy Hnrox Afgjwu Number of horizontal drilling heads Y: 4 Blade for grooving in the X direction 8-position turret tool changer 22-position chain tool changer Work table with 10 rows, EPS automatic clamping system Numerical control: BH660 Programming software: BiesseWorks advanced 1 vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety mats Protective screens Approximate weight: 7050 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, operating hours: 80 h, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 4,490 mm, travel distance Y-axis: 1,930 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 3,090 mm, workpiece width (max.): 1,530 mm, workpiece height (max.): 85 mm, number of axes: 3, total length: 5,550 mm, total width: 3,850 mm, overall weight: 2,460 kg, table length: 3,090 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, For sale is a nearly unused Felder Format4 CNC profit H08 16.38 F4I CNC woodworking machine. Bwjdpfjzy Hdaex Afgsu The machine was manufactured in 2023. The package includes the machine, a Felder RL 250 dust extraction filter, and a scissor lift table. The machine was purchased and was unused.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Working area X: 6250 mm Working area Y: 1840 mm Bwedpfezy Hc Njx Afgeu Working area Z: 250 mm 13.2 kW electro-spindle, HSK F63 connection Vertical drilling heads Horizontal drilling heads X: 8 Horizontal drilling heads Y: 4 Grooving blade in X direction 10-position revolver tool changer 14-position chain tool changer Working table with 12 rails Programming software: BiesseWorks Advanced 1 vacuum pump at 250 m3/h Chip conveyor belt Safety mats Protective netting Approximate weight: 7200 kg.

Condition: used, Year of construction: 2008, machine/vehicle number: 97457, functionality: fully functional, input voltage: 380 V, input current: 52 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 1,550 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, number of slots in tool magazine: 120, actuation type: electric, total height: 2,600 mm, total length: 6,500 mm, total width: 7,500 mm, overall weight: 12,000 kg, Equipment: CE marking, documentation/manual, FTT Insider R8 drilling center with transverse feed, equipped with 4 upper tool heads. Bsdpfezypnbex Afgowu Each head features: a) two sets of vertical drills with a 32mm spacing: 18 spindles in the Y-axis, 14 spindles in the X-axis, and an additional 4 horizontal spindles in the Y-axis. b) an electric spindle unit with a power of 3.8 kW and an ISO30 chuck. The machine also has two horizontal drilling units, each consisting of two units equipped with 18 spindles with a 32mm spacing. The machine is equipped with two chain-type tool magazines for vertical drills: 60 positions each. Belt conveyors at the inlet and outlet allow for manual loading of parts; it is also possible to operate the machine in a production line.