Ing. Hans Lang GmbH

Condition: used, Year of construction: 2011, functionality: fully functional, total width: 700 mm, Equipment: emergency stop, type plate available,

Condition: used, Year of construction: 2014, Printing technology: FDM: build process using molten plastic Build volume X × Y × Z: 254 × 254 × 305 mm Layer thicknesses: 0.178 / 0.254 / 0.330 mm Model material: ABSplus P430 Support material: SR-30, soluble support material Material supply: Separate cartridges for model and support material Cartridge capacity: Approximately 922 cm³ per cartridge Todpfx Aj Ahkluepdjd Network connection: Ethernet RJ45 Software: Stratasys Insight for print preparation Power supply (as per nameplate): 100–240 V, 12–6 A, 50–60 Hz Product number: 163-00500

Condition: used, Year of construction: 2011, turning diameter 330 mm turning length 669 mm Tedpfx Ao Ahklqspdsd control Siemens 828D

Condition: used, Year of construction: 2016, weight of the machine ca. 5200 kg Tjdpfx As Ahklmspdsd

Condition: used, Year of construction: 2009, x-travel 3000 mm y-travel 500 mm Tedpe Ahkliefx Apded z-travel 600 mm

Condition: used, Year of construction: 1996, turning diameter 300 mm turning length 500 mm Tedpo Ahklfefx Apdod control Fanuc weight of the machine ca. 3300 kg

Condition: excellent (used), mileage: 558,000 km, power: 324 kW (440.52 HP), first registration: 01/2009, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 500 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 13,000 kg, Equipment: ABS, AdBlue, cruise control, differential lock, electric window regulation, parking heater, power mirror, seat heater, spoiler, traction control, = Additional Options and Accessories = - 2 bunks - 12-speed manual gearbox - Aluminum fuel tank - Heated mirrors - Comfort driver's seat - Roof spoiler - Differential lock - Differential lock - High beam - Speed limiter - Refrigerator under the bed - Radio/CD player - Sleeper cab - Side skirts - Sun visor Tsdpfj Ahkk Eox Apdod - Auxiliary heater - V.E.B. engine brake = Notes = GOOD CONDITION VOLVO FH440 GLOBETROTTER (VIN: 9B545180) 4x2 TRACTOR UNIT WITH MANUAL GEARBOX, VBI-BRAKE, AIR CONDITIONING & FRIDGE UNDER BED!! ORIGINAL CAB COLOUR!! 440HP, EURO 5!! (D13 ENGINE) 12+2 GEARS MANUAL GEARBOX!! VBI-BRAKE!! 600 LITER ALUMINUM DIESEL TANK!! AIR CONDITIONING!! COMPLETE SPOILER SET ON CABIN!! SUN VISOR!! FRIDGE UNDER BED!! EXTRA STORAGE BOX UNDER BED!! ETC!! GOOD CONDITION TRUCK, READY FOR THE JOB !! MORE VOLVO TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPPING, TRANSIT REGISTRATION, STACKING, LOADING OR TRANSPORT? NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY MOVIE ON YOUTUBE FOR THE FIRST IMPRESSION!! ( / ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS B.V.; "YOUR GLOBAL TRADING PARTNER" = Further Information = General Information Year of construction: 2009 Technical Information Number of cylinders: 6 Engine displacement: 12,780 cc Transmission Gearbox: 12+2 GEARS MANUAL GEARBOX, 12 gears, manual transmission Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Max. axle load: 7100 kg; Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70R22.5; Twin tires; Differential lock; Max. axle load: 13000 kg; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 7,944 kg Payload: 12,556 kg GVW: 20,500 kg Functional Load compartment volume: 500 l Loading platform height: 115 cm Condition Technical condition: very good Optical condition: good Further information Please contact the Sales Department for more information.

Condition: excellent (used), mileage: 1,074,000 km, power: 324 kW (440.52 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,300 l, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, cruise control, differential lock, electric window regulation, parking heater, power mirror, spoiler, traction control, = Additional Options and Accessories = - 2 bunks - 12-speed manual transmission - Aluminum fuel tank - Heated mirrors - Comfort driver's seat - Roof spoiler - Differential lock - Differential lock - Speed limiter - Main switch - Refrigerator under the bed - Air-suspended seats - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater - V.E.B. engine brake Todpj Ahkktjfx Apdsd = Notes = GOOD CONDITION VOLVO FH440 GLOBETROTTER (VIN: 8B499845) 4x2 TRACTOR UNIT WITH MANUAL GEARBOX, VBI-BRAKE, 2x TANK, AIR CONDITIONING & FRIDGE UNDER BED!! ORIGINAL CAB COLOUR!! 440HP, EURO 5!! 12+2 GEARS MANUAL GEARBOX!! VBI-BRAKE!! 700+600 LITER ALUMINUM DIESEL TANK!! AIR CONDITIONING!! COMPLETE SPOILER SET ON CABIN!! SUN VISOR!! FRIDGE UNDER BED!! ETC!! GOOD CONDITION TRUCK, READY FOR THE JOB!! MORE VOLVO TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPPING, TRANSIT REGISTRATION, STACKING, LOADING, OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE-STOP-SHOP" COMPANY!! PLEASE CHECK OUR COMPANY MOVIE ON YOUTUBE FOR THE FIRST IMPRESSION!! (/) YOU CAN ALSO CHECK OUR WEBSITE: ENGEL TRUCKS B.V.; "YOUR GLOBAL TRADING PARTNER" = Further Information = General Information Year of construction: 2008 Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Transmission: 12+2 GEARS MANUAL GEARBOX, 12 gears, manual transmission Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Max. axle load: 7100 kg; Steered; Tire tread left: 30%; Tire tread right: 30%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70R22.5; Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 7,495 kg Payload: 11,505 kg GVW: 19,000 kg Functional Load space volume: 1,300 l Load platform height: 116 cm Condition Technical condition: very good Optical condition: good Further Information Please contact the Sales Department for further information.

Condition: reconditioned (used), Year of construction: 2001, Number of spindles 3 St. Number of tools variabel St. Spindle diameter 50 mm Spindle length 120,320,160 mm Weinig Univar 6 – NC Spindle ----- The machine will undergo a partial reconditionning at our warehouse prior to delivery. Image 2 and the subsequent images show a partially overhauled Univar 6 from our archive. Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) 1. Profiling Spindle (Synchronous/climb-cut spindle with automatic plunge function): ----- > Synchronous (climb-cut) operation for tear-free rebating > Position: Vertical, right-hand side > Number of tools: 1 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 120 mm > Motor: 7.5 kW 2. Profiling Spindle: ----- > Position: Vertical, right-hand side > Number of tools: Variable, NC-controlled > Vertical spindle stroke: Variable, 254 mm, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 320 mm > Motor: 11 kW 3. Profiling Spindle (Hardware/Fitting Milling Unit): ----- Position: Vertical, right-hand side Spindle diameter: 40 mm Tool clamping height: 160 mm Motor: 3 kW Adjustment: Radial (2 positions) and axial (3 positions), indexed/stepped Additional Features: ----- > Screen-based control system > Motorized feed height adjustment > Feed rollers positioned opposite the profiling spindle, with axial indexing/stepping Tsdpfx Apo Ahkkpsdjd Extraction Port Diameters: ----- Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Hardware/fitting spindle: 120 mm If the technical specifications of this machine do not meet your requirements, please feel free to contact us. Our highly experienced team is happy to assist you with any necessary modifications or with finding a machine that meets your specific requirements! ----- Technical specifications provided by the manufacturer – no guarantee! All prices are subject to statutory VAT. Technical details and specifications are subject to change and potential errors.

Condition: used, Year of construction: 2015, Length 12000 mm Todpfx Ao Ahkkhepdjd Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: used, mileage: 169,275 km, power: 70 kW (95.17 HP), first registration: 03/1969, fuel type: diesel, tire size: 9.00R20, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, gearing type: mechanical, suspension: other, total length: 7,250 mm, total width: 2,300 mm, = Additional options and equipment = - 4x2 - Leaf spring suspension = Further information = Tyre size: 9.00R20 Front axle: Steered; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf springs Rear axle: Twin tyres; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Reduction: single reduction; Suspension: parabolic leaf springs Unladen weight: 4,130 kg Payload: 7,870 kg Gross vehicle weight: 12,000 kg Tedpfx Ao Ahkkdjpdsd Damage: none

Condition: good (used), Year of construction: 2002, punching pressure 55.0 t punch diameter 20 in 20 mm punch diameter 40 in 10 mm adjustment of stroke 0 - 60.0 mm round bar steel 40.0 mm Todpfxe Ahkkaj Apdjd L-beam 120 x 12.0 mm square edge steel 40.0 mm shear: flat material 200 x 20 / 300 x 15 mm blade length 317 mm strokes per minute max. 25 work height max. 900 / 1130 mm oil volume 75.0 l voltage 400 V total power requirement 5.5 kW weight 1250 kg dimensions 1650 x 1100 x 1900 mm From a maintenance workshop Original price of the base machine: ~ 15.000 Euros Special price upon request Equipment: - Electro-hydraulic structural steel shear - Punching station, flat bar shear, angle/profile steel shear, notching station * Punching station equipped with special punching attachments - Heavy-duty, robust welded construction - Infinitely adjustable stroke length - Highly compact design - Support table at the notching station - Side support tables - 2x mobile foot switches - Emergency stop button - Operating manual (PDF)

Condition: used, total height: 1,900 mm, total width: 160 mm, total length: 2,000 mm, Colour: Green Empty weight: 2.000 kg Price: On request - Documentation available: Yes - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 5.0 - Number of axes [pcs]: 3 Todpfe Ahki Sex Apdod - X-axis travel [mm]: 700 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 490 - B-axis rotation [°]: 360 - C-axis rotation [°]: 270 - Table length [mm]: 1100 - Table width [mm]: 255 - Tool holder: ISO40 - Main spindle power [kW]: 3 - Min. spindle speed [rpm]: 38 - Max. spindle speed [rpm]: 1510 - Options: Chip collection tray, External cooling, Digital readout - └ Type of digital readout: Mitutoyo - Transport dimensions: 2000mm x 165mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, diameter 150 mm Tsdo Ahki Depfx Apdod Workpiece thickness max. 100 mm work height max. 960 mm

Year of construction: 2021, condition: used, workpiece width - max. 780 mm Teds Ahkiyspfx Apdsd workpiece height max. 120 mm workpiece sizes - min. 20x20 mm total power requirement 6 kW weight of the machine ca. 445 kg dimensions of the machine ca. 1500x1100x1550 mm

Condition: used, sheet width 3000 mm plate thickness 6 mm Todpe Ahkinsfx Apdsd pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling cones and funnels.

Condition: used, Year of construction: 1999, max. wheel diameter 360 mm gear width 175 mm max. module 7 min. module 0,5 root circle diameter min. 10 mm grinding stroke max. 175 mm max.helical angle +/- 45 ° max. number of teeth 600 min. number of teeth 6 workpiece weight max. 60 kg grinding wheel diameter min/max280/350 mm total power requirement 26 kW weight of the machine ca. 6,6 t Features: - Equipped with a Burri dressing system without interchangeable gears - Workpiece drive was replaced in 2015. - Z-axis overhauled at the factory and reinstalled (2015) - Includes documentation Spare Parts and Accessories: - 60 flanges profiled with grinding wheels – plus approx. 10 grinding wheels - 20 sets of standard diamond wheels - Various custom-made special diamond wheels Tsdps Ahkh Rjfx Apded - 2 additional dressing units, fully functional - Various electrical and mechanical spare parts - 3 pressure intensifiers for hydraulic clamping - 1 collet, Ø30 - 1 collet, Ø65 - Various spray nozzles on the spindle side

Condition: used, Year of construction: 2017, overall weight: 8,850 kg, Model 570 A 2000-400 Year of manufacture: 03/2017 Net weight according to the technical data sheet for the basic configuration: 8,850 kg Tjdpfx Aps Ahkh Ajded with the following peripherals: - KUKA robot KR 16-2, year of manufacture 2017, with control panel - KUKA robot KR 10 R1100 sixx, year of manufacture 2017, with control panel - FARRAGTECH Card 40S compressed air granulator dryer - NZME temperature control unit station - Conveyor belt - Machine stairs - Machine documentation as shown - Enclosure as shown, without any further accessories or items depicted in the background, not tested for function or completeness This ARBURG 570 A 2000-400 injection molding machine will be auctioned online in our industrial auction / machine auction "Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks and various". You can find this and many other items from the areas of temperature control units, operational equipment and storage technology on our platform.

Condition: used, mileage: 932,220 km, power: 405 kW (550.65 HP), first registration: 09/2017, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 8x4, wheelbase: 4,970 mm, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 7,140 mm, total width: 2,540 mm, total height: 4,000 mm, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, parking heater, retarder, spoiler, tachograph, = Additional Options and Accessories = - Aluminum fuel tank - Digital tachograph - Refrigerator - PTO (Power Take-Off) - Radio/CD player = Further Information = Front axle 1: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Tedpfe Ahkhqjx Apdjd Front axle 2: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Air suspension Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 25%; Tire tread depth left outer: 25%; Tire tread depth right inner: 25%; Tire tread depth right outer: 25% Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 25%; Tire tread depth left outer: 25%; Tire tread depth right inner: 25%; Tire tread depth right outer: 25% Unladen weight: 11,480 kg Payload: 24,520 kg GVW (Gross Vehicle Weight): 36,000 kg Damage: None License plate: 74-BJS-8

Condition: used, Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 655 mm, controller manufacturer: Heidenhain, controller model: TNC 426, rotary table diameter: 800 mm, overall weight: 10,100 kg, spindle speed (max.): 15,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 60, Equipment: chip conveyor, Machining Center - Universal Manufacturer: MIKRON Type: UCP 1000 Year of manufacture: 2000 Control system: HEIDENHAIN TNC 426 Technical specifications: X-axis: 800 mm Y-axis: 1,000 mm Z-axis: 655 mm C-axis: 360° A-axis: -25° / +45° Table diameter: 800 mm Spindle speed: 15,000 rpm Tool holder: SK 40 Number of tool stations: 60 Machine weight: approx. 10,100 kg Todpo Ahkhiefx Apdsd Condition: Used Technical features & accessories: - Chip conveyor - Compact filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 1983, internal diameter min / max: 10 / 250 mm grinding depth 400 mm external diameter max. 380 mm swing dia. 390 mm table travel max. 550 mm stroke of the table min. 2 mm rapid traverse 10 m/min table speed -stepless- 0 - 10 m/min rough adjustment 18 mm fine adjustment 4 mm max. workpiece weight 100 kg spindle head B 6 DIN 55021 spindle turning speed - stepless 15 - 1.500 U/min pivoting angle +/- 30 Grad spindle bore 50 mm power capacity 2 kW rapid traverse 0 - 250 mm/min Tjdpfxj Ahkhfe Apdod stroke 70 mm power requirement 3 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,0 x 3,0 x 3,2 m Internal Grinding Machine BAHMÜLLER - JES 12 - new control (July 2015)

Condition: used, Year of construction: 2019, x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens turning speed range - main spindle 10 - 10.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 70 / 48 Nm tool taper BT 40 table surface area 800 x 320 mm max. table load 300 kg T-slots 3x 14 x 100 mm distance spindle /table 100 - 600 mm number of toolpositions 12 pos. tool taper BT 40 max. tool diameter 70 mm max. tool weight 6,0 kg change-time tool to tool 7,0 sec rapid traverse ( X / Y / Z ) 10 m/min feed speeds max. 10.000 mm/min repeating accuracy +/- 0,008 mm positioning accuracy +/- 0,01 mm total power requirement 15 kVA weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m Tsdpfx Aps Ahkhbedod CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - SHOW-ROOM-MACHINE

Condition: used, diameter div. Tjdpfx Ape Ahkg Tsdsd number 23x tool adaptor VDI 25

Condition: used, diameter div. number 30x tool adaptor HSK-A 63 Tjdpj Ahkg Nsfx Apded

Condition: used, diameter div. number 20x Tedpfx Ao Ahkg Eepdod tool adaptor HSK-A 63