Trunk Floor

Condition: excellent (used), 2 units per side, 5.5 kW motors Njdpfxo Aful Ts Ag Rswn 40 mm spindles Maximum working length: 250 cm Maximum working height: 180 mm Overall dimensions: 230 cm width 450 cm length 190 cm height

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: CAR-LPR-001, working width: 300 mm, feed rate X-axis: 15 m/min, overall weight: 4,500 kg, input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 24 mm, Equipment: double-sided, Equipped with an infeed table 300x55x100 cm, 2 transport chains with prism guides (length approx. 2400 mm), 2 pressure chains with drive motor and height adjustment, 2 machining motors with profiling cutter Ø 250 mm and height adjustment, 2 machining motors with chamfering cutter Ø 150 mm and height adjustment, manual width adjustment, 2 pre-cutters. No air connection required. CAPACITY: width minimum 90 mm, width maximum 300 mm, thickness minimum 9 mm, thickness maximum 24 mm, length minimum 450 mm, length maximum infinite mm; Nwsdpfx Aoz Rkctog Ren total power approx. 25 kW; including flexible hoses up to the ceiling and including lifting table. The machine is in like-new condition and in perfect working order. Perfection in simplicity and quality!

Condition: ready for operation (used), Three drive units per side (top, bottom, side) Njdjz Ii Afopfx Ag Rjwn Top and bottom motors: 2.2 kW Side motor: 3 kW Spindle diameter: 40 mm Cutting length: 300 cm Overall dimensions: Length: 5.1 m Width: 185 cm Height: 150 cm

Condition: excellent (used), SIZING-TENONING LINE, composed of the following machines: Nedpfozzzupox Ag Rown A) Loader (portal/bridge) double pick-up station "SAG" CAR MS 2000 with central motorized rollers conveyor and 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 C) Turning Station "SAG" Mod. Girapannelli (from lengthwise to crosswise) with double cone system. D) 2nd Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 E) Turning Station "SAG" Mod. Girapannelli, (from lengthwise to crosswise) with double cone system. F) 3rd Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 H) Stacker (portal/bridge) double stacking station "SAG" CAR/S MS 2000 with central motorized rollers conveyor and 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet Nsdpszxn S Aefx Ag Rown No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: excellent (used), CATALOGUE NUMBER: 6969 TECHNICAL DATA Circular saw: - max. saw blade diameter 300mm - spindle 30mm - max. cutting height 60mm - blade adjustable front/rear - motor 2.4kW Milling machine: Arbor: - spindle diameter 40mm - spindle working height 190mm - spindle locking - max. milling cutter diameter 360mm - motor 7.5kW - 2 types of rotation speeds - material clamping - side carriage adjustable up/down, front/rear - angle guide - retractable support from the table - manual carriage feed - dust extraction nozzle diameter 80mm, 160mm - dimensions L/W/H 1910x1960x1800mm, - weight 830kg Nodpfx Agjzw Dgms Rswn – Polish production – DTR documentation – upper control panel – used milling machine, very good condition Net price: 13900 PLN Net price: 3233 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: used, machine/vehicle number: 008379, Squaring: First and Second Pass Max Panel Thickness: 35 mm Max feed speed: 30 m/min Njdpfx Agezvwp Ej Rjwn Distance between dogs: 320 mm

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Nwedjzuzfbjpfx Ag Ron Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), CATALOGUE NUMBER: 6024 TECHNICAL DATA: - Main motor: 2.9kW - Spindle motor: 0.75kW - Carriage feed motor: 0.75kW - Power supply: 380V Njdpfoztaqtex Ag Rown - Dimensions (L/W/H): 1600x1100x1200mm - Weight: 891kg The machine is equipped with: – 2 tables with dimensions of 300x340mm – Pneumatic clamps – Tables with adjustable angle in two planes – Possibility to create longitudinal and circular arbors on the tables – Table speed and spindle speed adjustable mechanically – Tables adjustable up/down – Arbor width adjustment Net price: 16900 PLN Net price: 3930 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 6462 TECHNICAL DATA - 2.2 kW motor - 380V power supply - 0.9 kW head feed motor - 2 x 100 mm dust extraction port diameter - dimensions (L/W/H) 1330x1100x1220 mm - weight 920 kg Machine equipped with: – 2 tables with squares, dimensions 385x330mm – 2 pneumatic clamps – tables with adjustable angle in two planes – possibility to create longitudinal and circular tenons on the tables – tables adjustable up/down – tenon width adjustment – central lubrication – unpainted – Italian production Nwsdpfx Aozr U Evog Ron – used tenoning machine, very good condition Net price: 23,900 PLN Net price: 5,558 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: TSA5215 – TSA5218 – TSA5220, We are an Italian Company and we have this machinery installed into our factory in Tunisia. The line is currently configured for the production of floating flooring strips with Uniclic profile and is equipped with a complete set of diamond tools. The line is still installed and can be inspected under power. Production tests are available upon request. Line includes • Panel cutting machine Nwedpfozkv Ezox Ag Rsn • Motorized roller conveyor • Double machine for long-side profiling • Automatic transfer system • Double machine for end profiling • Automatic stacking system • Complete handling conveyors Technical Features • 10 spindles • Opening machine 1: 180–1200 mm • Opening machine 2: 200–1800 mm • Installed power: 92 kW • 380 V electrical supply Advantages • Complete production line • Immediately available • Installed and fully operational • Inspection and production test possible • Ideal for flooring, panels and similar products

Condition: used, Technical specifications: Max. saw blade diameter: 300 mm Min. saw blade diameter: 100 mm Saw blade arbor diameter: 25 mm Router bit arbor diameter: 35 mm Router bit arbor height: 120 mm Manual feed adjustment for the arbor and saw blade Table length: 1400 mm Manual clamping device Separate motor for the arbor and saw blade Power supply: 400 V Overall dimensions: Length: 1950 mm Width: 1000 mm Nwjdszik Diopfx Ag Ron Height: 1250 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Squaring and profiling line for slats, consisting of: - Single-chain profiling machine 1+1 - Transfer conveyor Nwodpfxszfvv As Ag Rjn - Double end-notching machine 2+2 Working width: 55 - 100 mm Working length: 160 - 800 mm Working thickness: 3 - 6 mm

Condition: new, Year of construction: 2026, functionality: fully functional, BGD double-blade squaring machine Nwedpfx Agezfvvce Ren Equipped with 5+5 motors Minimum working width: 70 mm Maximum working width: 3000 mm Thickness: 4-60 mm Customizable according to customer requirements

Condition: excellent (used), working width: 2,500 mm, Gabbiani double-head panel squaring machine 3 + 3 working units Maximum working width 2500 mm Nwsdpfjzfvufjx Ag Rsn Overhauled and in working order

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, working width: 3,000 mm, overall weight: 5,000 kg, input voltage: 380 V, Equipment: documentation/manual, Celaschi TSA300DS double-blade squaring saw Mobile shoulder opening 3000 mm, controlled via touchscreen Minimum working width 200 mm Nodpfxjzfvtno Ag Rjwn 5+5 motor groups Slider width 65 mm Feed rollers with 400 mm pitch Pneumatic activation of the cutter block Automatic activation controlled by CNC Adjustable feed speed (m/min): 4-24

Condition: good (used), Double-end tenoner, brand SCM, model Concept 2000, complete with electronic feed and height adjustment. Chipbreaker on the right and left spindles. Timing shaper cutter + fixed shaper cutter on the right and left spindles. Shaper cutter with grinding wheel on the right and left spindles. Belt sanding unit on the left spindle. Inverters on all shaper cutters. Working width 3000 mm. Pin ejection with selector. Nsdpfx Ajzfprkog Rswn Track shoe width 50 mm for processing narrow parts. Machine in perfect condition, ready for use.

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Njdpfx Ajzc Rdksg Rewn

Condition: excellent (used), functionality: fully functional, Bacci TSG 2T edge-banding machine Spindle speed: 6000 rpm Maximum edge thickness: 115 mm + 2R Edge thickness: 10 – 45 mm Table tilting angle (upwards): 0° – 15° Table tilting angle (downwards): 0° – 30° Table side tilting angle: 0° – 20° Machine weight: 1050 kg Machine dimensions: 1500 x 1150 x 1350 mm Nwjdjy Uc Ruspfx Ag Rsn

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 3+3 Vertical columns to support the working units As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Nwedpfxsyz Si Ho Ag Rjn Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is the 1st Double End Tenenor in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 300 Max. useful working width (mm) 2000 Min. useful working thickness (mm) 6 Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 60 Nwsdjyz Siaepfx Ag Ren No. 4 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Vertical Milling Unit (1.5 kW at 1470 rpm)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer Njdpeywxrasfx Ag Rewn 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, Torwegge Double End Tenoner H 613 E – Year 1991 – Excellent Condition – Extensive Tooling Included For sale is a high-quality Torwegge Double End Tenoner, Type H 613 E, manufactured in 1991, and made in Germany to the highest quality standards. The machine is in exceptionally well-maintained technical and visual condition and has been regularly serviced and professionally maintained throughout its operating life. It was reliably used in industrial woodworking until recently and is ready for immediate operation. Nsdjywfiropfx Ag Rjwn Another significant advantage is the modernized electrical system: The complete control cabinet was completely renewed approximately four years ago by Robust Maschinenbau, resulting in a modern and reliable electrical system. The scope of delivery includes an extensive set of tools, numerous spare parts, and all original documents, operating manuals, and technical documentation. Technical data Manufacturer: Torwegge Holztechnik GmbH & Co. KG Type: H 613 E Year: 1991 Machine number: 394 Operating voltage: 380 V Frequency: 50 Hz Connected power: 30 kW Main fuse: 100 A Scope of delivery Torwegge Double End Tenoner H 613 E Extensive set of tools Various spare parts All machine documents and documentation Completely renewed control cabinet (approx. 4 years ago) The machine can be inspected, demonstrated under power, and thoroughly tested at any time by prior appointment. A forklift is available for loading the machine. If you have any questions or would like to arrange a viewing, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 1980, 1 x AUTOMATIC DOUBLE END TENONER SPANEVELLO Model STDL with 3 + 3 spindles TECHNICAL DATA: - Working width: 170 – 3000 mm - Workpiece thickness: 5 – 120 mm - Top pressure beams with drive belts and clutch - Bottom feed chains, 70 mm width Nwjdjyurqpopfx Ag Rjn - Automatic lubrication of bedplates - Automatic lubrication of feed chains - Dogs distance: 340 mm - Variable feed speed: 1.5 – 20 m/min - Power supply: 380V / 3ph / 50 Hz MACHINE EQUIPPED WITH: - Left-hand adjustable infeed side fence – manual horizontal adjustment Jump Cutting/Scoring Units 1-2: - Motors: 1.5 HP – 3000 RPM - Shaft diameter: 35 mm x 55 mm length – Max. tool diameter: 200 mm Hogging/Milling Units 3-4: - Motors: 5 HP – 3000 RPM - Shaft diameter: 40 mm x 55 mm length – Max. tool diameter: 250 mm - Dust extraction outlet diameter: 140 mm - Tiltable 0–90° - Manual vertical/horizontal adjustment with readout Milling Units 5-6: - Motors: 5 HP – 3000 RPM - Tiltable 0–90° - Manual vertical/horizontal adjustment with readout - Shaft diameter: 40 mm x 95 mm length – Max. tool diameter: 250 mm - Dust extraction outlet diameter: 120 mm Machine in good working condition. Tested in our workshop prior to delivery.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment Nwsdpfx Asyk Empog Rsn • Soundproof enclosure • Safety guard • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Price: €290,000 excl. VAT, shipping, and disassembly.