Hermann Reckers GmbH & Co. KG

Condition: good (used), functionality: fully functional, Two KSB ETANORM SYT horizontal single stage centrifugal pumps, model ETNY 080-065-160 SG DB25LD20125. Mounted on metal base frames and driven by three phase electric motors with guarded couplings. Indicated nominal data: flow rate of 105 cubic metres per hour, total head of 28 m, operating speed of 2,958 rpm and diameter of 160 mm. One unit was manufactured in 2018 and the other in 2020. ATEX II 2G execution. Each pump incorporates an EagleBurgmann TS1016/A007-00 double mechanical seal manufactured in 2020, with an 8 litre jacket volume, 0.2 litre tube volume, maximum allowable pressure of 16 bar, test pressure of 28 bar and temperature range from minus 60 to plus 200 degrees Celsius. The system includes instrumentation, auxiliary piping, reservoirs, R. STAHL explosion proof local electrical control panels and a support structure. Gsdez R Azuspfx Akyjbu

Condition: good (used), For sale: a used Hidrostal industrial submersible pump, complete with cables, float switch, control module, and a metal discharge pipe terminated with a Storz-type coupling. The pump has a transport handle and a wide base for stable positioning. Data read from the nameplate: Manufacturer: Hidrostal Gsdpoz Rq Hlefx Akyjbu Type designation: Hidrostal C0CQ-L01 + CNBA2-GXEQ 3 kW with control – the remaining part of the designation is unreadable. Motor number: 116322 Output power P2: 3 kW Input power P1: 3.8 kW Supply: 380–420 V, three-phase Frequency: 50 Hz Rated current: 6.4 A Rotational speed: 2730 rpm Power factor cos φ: 0.86 Winding connection: delta (Δ) Insulation class: F Maximum ambient temperature: 40°C Marking on the nameplate: EEx d IIB T4 ATEX marking number: 99 ATEX 1079 Included equipment: Pump with motor. Power and control cables. Control module with indicators. CEE power plug. Float switch. Metal discharge pipe with Storz-type coupling. Base and transport handle.

Condition: good (used), For sale: a used KSB KRTE 100-250/54UG-237 industrial submersible pump, complete with control box, cables, float switch, and chain. The pump is equipped with a side discharge nozzle with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Gbsdpez Rq A Tefx Akysu Manufacturer: KSB Model: KRTE 100-250/54UG-237 Capacity as indicated on the nameplate: 27.78 l/s, approximately 100 m³/h / 1667 l/min Head: 14.8–9.5 m Rated power P2: 5.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rated current: 12.5/7.2 A Maximum medium temperature: 40°C Protection class: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.80 Weight according to the nameplate: 117 kg Pump serial number: 29 140 356 Motor serial number: 052236 Included in the set: Pump with motor. Control box with buttons and switches. Cables. CEE power plug. Float switch. Chain. Storz-type discharge coupling.

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Gjdpfx Aez Rqz Njkyjbu Head: 17.4–6.2 m Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.81 Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. CEE power plug. Chain. Storz-type discharge coupling.

Condition: good (used), For sale: a used Oddesse po-SV-406 F11 T/A multi-stage vertical pump with a 1.1 kW three-phase motor. The pump has a metal housing for the hydraulic part, flanged connections in a linear arrangement, and a base with mounting holes. Data from the nameplates: Gedpfx Akoz Rqxbjyobu Manufacturer: Oddesse Model: po-SV-406 F11 T/A Pump number: C0427 Product code: 107390561 Flow rate: 2.4–8 m³/h, which is approximately 40–133 l/min Head: 51–16 m Minimum head Hmin: 16 m Rated power P2: 1.1 kW Pump speed: 2900 rpm Motor: SM80B14/311 Supply at 50 Hz: 230 V Δ / 400 V Y Rated current: 4.52 A Δ / 2.61 A Y Motor protection class: IP55 Insulation class: F Power factor cos φ at 50 Hz: 0.77 Motor code: 13274R00H Motor number: 00049

Condition: excellent (used), For sale: a used submersible pump, VEB Pumpenfabrik Oschersleben KRD1G, manufactured in East Germany (GDR). The pump has been inspected and is in full working order. It is equipped with a carrying handle, power cable, power plug, and a connector on the discharge nozzle. Technical specifications: Model: KRD1G. Capacity: 0–35 m³/h, maximum approximately 583 l/min. Head: 20–0 m. Godpfxez Rqvyj Akyjbu Motor power: 1.5 kW. Power supply: three-phase, 380 V. Rated current: 4.1 A. Frequency: 50 Hz. Rotational speed: 2700 rpm. Maximum medium temperature: 40°C. Insulation class: F. Power factor cos φ: 0.88. Serial number: 6155170.

Condition: excellent (used), For sale: EMU KS 24 industrial submersible pump, equipped with a power cable with a CEE power plug and a discharge connection with a Storz-type coupling. Technical data from the nameplate: Manufacturer: EMU Unterwasserpumpen GmbH, Hof, Germany Model: KS 24 Motor designation: F 13.1-2/9 Power: 2.36 kW Power supply: 400 V, three-phase Frequency: 50 Hz Rated current: 4.7 A Rotational speed: 2900 rpm Winding connection: star (Y) Year of manufacture: 1994 Approximate performance according to an additional chart: Head Approximate flow rate 0 m — free outlet 59.5 m³/h 5 m 52 m³/h 10 m 45 m³/h 14 m 38.5 m³/h Godpfxez Rqrbo Akyebu 18 m 20 m³/h

Condition: excellent (used), For sale: industrial submersible pump, Kreiselpumpen Dresden GmbH, model RAMBO 100-KDFU-150/13.5-A0-03. The pump is equipped with a 3 kW motor, powered by 380 V. The maximum flow rate is 93.6 m³/h (1560 l/min), and the maximum head is 27 m. Gbjdpfxez Rkluo Akyju Technical data from the nameplate: - Manufacturer: Kreiselpumpen Dresden GmbH - Series: RAMBO - Model: 100-KDFU-150/13.5-A0-03 - Serial number: 94200695 - Motor power: 3 kW - Supply voltage: 380 V - Rated current: 10 A - Maximum flow rate: 93.6 m³/h - Maximum head: 27 m - Maximum fluid temperature: 40°C - Protection class: IP68 - Pressure rating: PN10 - Unit weight: 43 kg - Year of manufacture: 1994

Condition: excellent (used), For sale: an industrial submersible pump with a 7.5 kW three-phase motor, equipped with a power cable with a power plug and a flanged discharge connection. Data read from the nameplate: Motor power: 7.5 kW Supply voltage: 380 V Rated current: 17 A Rotational speed: 2850 rpm Performance range: 0–160 m³/h Head range: 35–0 m Power factor cos φ: 0.92 Insulation class: F Serial number: 8353767 Gjdpjz Rkc Tefx Akysbu The maximum flow rate and maximum head refer to different operating points of the pump. Equipment and construction: Metal housing. Lower suction basket. Base for vertical positioning. Lifting eye. Flanged discharge connection. Power cable with power plug. Condition: used, visible signs of wear, scratches, and corrosion on the discharge connection. The visual condition is shown in the photos.

Condition: excellent (used), Industrial submersible pump VEB Pumpenwerke Halle KRD 16-A/160/6 for sale, suitable for water pumping and dewatering applications. The pump has been inspected and is in working order, ready for use. Robust metal construction, lower suction basket, stable base, and discharge nozzle with a pin-type connector. Includes a power cable with an industrial plug and a chain, as shown in the pictures. TECHNICAL DATA: • Manufacturer: VEB Pumpenwerke Halle, GDR • Model: KRD 16-A/160/6 • Serial number: 5506576 • Power: 7.5 kW • Power supply: three-phase, 380 V • Rated current: 17 A • Frequency: 50 Hz • Performance range: 0–160 m³/h • Head range: 32–0 m • Rotational speed: 2810 rpm • Weight: 80 kg • Power factor cos φ: 0.9 • Insulation class: F • Maximum medium temperature: 40°C Maximum performance and maximum head do not occur simultaneously. CONDITION: Used, inspected, and in working order. Visible signs of use, dirt, surface wear, and superficial corrosion on the chain. The pictures show the offered unit and its actual visual condition. Gbodsz Rkcgspfx Akyeu

Condition: used, Three-pump vacuum unit with control cabinet for food processing plants Gedpfxsz Nc Iqs Akysbu This used unit consists of three Bora vacuum pumps, type SAP 450, mounted on a single shared frame. Each pump has a filter housing on top and all three are connected to a common manifold. The accompanying control cabinet holds three Omron Hitachi frequency inverters (JX series, 4 kW, 400 V). It also contains a Moeller controller with display and motor protection switches. Three rotary switches are fitted in the door. The frame stands on adjustable feet. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vacuum unit with three pumps and control cabinet Pumps: 3 × Bora SAP 450, on a shared frame with common manifold Frequency inverters: 3 × Omron Hitachi JX, 4 kW, 400 V Controller: Moeller controller with display, motor protection switches Frame: On adjustable feet

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 184 kg, total length: 1,100 mm, total width: 400 mm, total height: 660 mm, power: 18.5 kW (25.15 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 42 A, type of input current: AC, type of cooling: water, rotational speed (max.): 1,500 rpm, protection type (IP code): IP55, KSB Pump ETABLOC ETB 125-100-315 GGsAV66D301854B PD2M Single-stage, volute casing pump in block design with a motor-integrated frequency converter. Year of manufacture 2021 (operated for only 1 year; a higher flow rate was required, which is why the pumps were replaced). Equipped with a PumpDrive 2/PumpDrive 2 Eco frequency converter. Self-cooled frequency converter with a modular design, enabling stepless speed control of asynchronous and synchronous reluctance motors via analog standard signals, fieldbus, or control unit. Four pumps are available for sale. Individual sale is possible. The price is per pump. Supply voltage: 400 V Power: 18.5 kW Current consumption: 42.0 A Pump speed: 1500 rpm Medium: Ethylene glycol-based antifreeze, inhibited, closed system, e.g., Antifrogen N or comparable products. Main pump connections: Suction nozzle DN 125 / PN16 Gbedpfez I R Rkex Akyeu Discharge nozzle DN 100 / PN16

Condition: new, For sale: a new, unused OSNA booster pump set with an AEG three-phase motor-driven piston pump and a horizontal, galvanized HUCH 150 l pressure tank, connected via a belt drive. The set shows signs of storage, as visible in the photos. The sale includes the unit and all components shown in the photographs. Pump and drive: Pump manufacturer: OSNA Design: piston pump Marking on the pump body: LG1 Drive: belt drive Motor manufacturer: AEG Motor type: EAM 80NY4EX Y4 Rated power: 0.55 kW Power supply: three-phase Rated voltage: 220/380 V, Δ/Y connection Rated current: 2.65/1.52 A Motor speed: 1400 rpm Frequency: 50 Hz Power factor cos φ: 0.75 Protection rating: IP54 Gjdpfx Aoz I Elpokyobu Insulation class: B Motor explosion-proof marking from the nameplate: E Ex e II T3 Motor serial number: 0507913 Pressure tank – data from the nameplate: Manufacturer: HUCH GmbH Behälterbau, Germany Nominal capacity: 150 liters Permissible working pressure: 6 bar Permissible operating temperature: 0–50°C Design: horizontal, galvanized Tank manufacturing year: 2004 Factory number: 144097 Marking on the nameplate: DGRL 97/23/EG, CE 0035

Condition: good (used), Tapflo PT20 high-pressure peristaltic hose pump Gbsdpfxsz It Eqs Akyju high-pressure peristaltic hose pump, mounted on stainless skid with 0.55Kw motor, previously used in the food industry, 3Ph

Condition: as good as new (ex-display), Article description: Grundfos block pump NB50-160/167 A-F2-A-BQQV MG160MB2-42FF300-H3 Gbsdpjz Ing Nefx Akyou ----- Condition of the article: Very good condition – unused, new stock. Internal number: LS5

Condition: ready for operation (used), Year of construction: 2024, Brand: KSB Type: AU F-150-150-045 GG 109D Year of manufacture: 2024 169.00 m3/h 19.00 m Godpsz Imulefx Akysbu 1473 1/min Condition: new Includes manual

Condition: used, functionality: fully functional, Hydraulic power unit Tank Pack Hydac Flutec – 7.5 kW including gear pump Danfoss SNP2/22 DC001 1/0E Gsdpfx Ajz Huxpskyebu 22 cm³ including electric motor 7.5 kW, 1435 rpm

Condition: used, Year of construction: 2015, functionality: unexamined, For sale is a well-maintained screw conveyor pump. It was used intermittently over several years in conjunction with a chain hoist. Includes a frequency converter. Gbedpfxsz Hm Tre Akyju These pieces of equipment were disassembled in 2024 due to a relocation at the old site and have not been used since. The pump can be connected to power and its functionality can be checked. Inspection is possible at our location in Zurich.

Condition: used, Grundfos Vertical Water Pump Gbjdpfx Aksz E Nhvsyju Complete with isolator valve Power isolator switch 1.5 kw 5.7 m3/hr H max 60m

Condition: new, The Lutz Type ME II 5-230 is a professional, industrial-grade explosion-proof universal motor designed for drum and container pumps. Manufactured by Lutz Pumpen, it is specifically engineered for safely transferring highly flammable, combustible, and hazardous low-viscosity liquids such as solvents, fuels, and alcohols. Specifications Voltage: 220–230 V AC / 50 Hz (Single-phase power) Gbsdpfxsz Erynj Akyou Power Output: 540–580 W (approx. 0.78 HP) Current: 3.0 A Enclosure Protection: IP54 (Dust and splash-water protected) Explosion Protection Rating: ATEX certified (II 2 G Ex de IIC T6) Weight: Approximately 6.6 kg (14.5 lbs) Key Features & Safety Mechanisms Double-Shell Housing: Built from robust, chemical-resistant materials to protect internal components from corrosive vapors and heavy handling. Low-Voltage Release (LVR): An essential safety feature that prevents the motor from automatically restarting after a power outage, protecting operators from unexpected spills or splashes. Quick-Action Coupling: Allows for rapid, tool-free connection to various Lutz pump tubes (immersion tubes) made of polypropylene, PVDF, stainless steel, or aluminum. Brand new never used. Please check out our other listings as well.

Condition: excellent (used), For sale is a professional IVECO Magirus TS 8/8 fire pump, equipped with a powerful, gasoline engine, FIAT 156 A 2.000, with a power output of 32 kW. This robust unit is designed for intensive use – suitable for fire brigades, industrial plants, farms, technical services, municipal companies, and for pumping large volumes of water. The pump is conveniently started using an electric starter. It also has an emergency manual start option. An integrated control panel ensures easy operation. Pump Data: Manufacturer: IVECO Magirus AG Type: FP 8/8 / TS 8/8 Standard: DIN 14420 / DIN 14410 Year of manufacture: 1997 Serial number: 86385 PVR test number: 346/6/90 Nominal flow rate: 800 l/min Nominal pressure: 8 bar Pump rated speed: 2820 rpm Gbodpfjz Drc Tsx Akyeu Gear ratio: 1:1 Weight of the ready-to-use pump: 189 kg Engine Data: Manufacturer: FIAT Auto S.p.A. Engine type: 156 A 2.000 Capacity: 999 cm³ Power: 32 kW at 5000 rpm Limited operating speed: 3500 rpm Fuel: unleaded 95 gasoline Start: electric starter Emergency manual start Battery included Equipment: automatic PRIMATIC suction system two pressure gauges work light integrated fuel tank control panel with indicators RPM adjustment pump clutch discharge valves sturdy transport frame with handles The pump is in very good condition and is solidly built. It shows normal, minor signs of wear consistent with its age. The condition and completeness of the unit are accurately depicted in the photos. This is a very powerful, professional pump with a flow rate of up to 800 liters per minute – ready for fire, industrial, and agricultural applications. Shipping on a pallet is possible.

Condition: used, Year of construction: 2008, There are two identical pumps available, nominal suction capacity: 245m³/h, ultimate pressure: 100hPa, ultimate pressure (continuous operation): 200hPa, rated motor power: 5.5kW, rated motor speed: 3000/min, sound pressure level (ISO 3744), 1m distance, at medium load: 75dB(A), oil fill: 1l, gas inlet: G2, gas outlet: R1, length: 1050mm, width: 515mm, height: 450mm, weight: 240kg. Gsdpfsz Da Nhex Akysbu

Condition: good (used), Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic power unit -Hydraulic reservoir: Hydraulic tank for hydraulic power unit -Tank capacity: 30 liters -Hydraulic tank: with level and temperature indicator Gbodpfoz Azwyox Akyou -Return filter: Hydac RF BN/HC 30 BB 10 A 1.0 -Motor mount: Ø 147 mm / bolt circle Ø 163 mm M10 -Individual components: see photos -Dimensions: 495/340/H375 mm -Weight: 13.8 kg

Condition: new, SKF MKU2-KW6-22003+428 – central oil lubrication unit Original unit from SKF / SKF Lubrication Systems Germany GmbH, designed for central oil lubrication systems. Unused unit – warehouse stock. It has not been used in an installation. Only minor storage marks are visible on the housing and tank. TECHNICAL DATA: • Manufacturer: SKF Lubrication Systems Germany GmbH • Model: MKU2-KW6-22003+428 • Type: unit / gear pump for central lubrication • Power supply: 230 V AC • Frequency: 50/60 Hz • Output: 0.2 l/min Gbjdpfx Aksz Alyfoysu • Tank capacity: 6 liters • Tank: plastic • Medium: oil • Maximum operating pressure: 30 bar • Connection: G 1/4" • Number of outlets: 2 • Pressure gauge: YES • Pressure switch: YES • Level control: YES • Control: integrated • Protection class: IP54 • Operating temperature: +10 to +40°C • Oil viscosity range: 20–1500 mm²/s • Year of manufacture shown on the nameplate: 35/17 On the nameplate: SKF Lubrication Systems Germany GmbH MKU2-KW6-22003+428 230 V, 50/60 Hz IEC38 Made in Czech Republic The unit is complete, in the condition shown in the pictures. Condition: NEW / UNUSED – WAREHOUSE STOCK. Sold exactly in the condition and configuration shown in the pictures.

Condition: used, A high-quality liquid transfer and control package consisting of 4 identical Grundfos horizontal multistage pumps and a comprehensive set of industrial blue butterfly valves with flexible rubber expansion joints. Fits for industrial water loops, water treatment boosting systems, pressure maintenance, or process engineering setups. Gbjdpez Ahmbjfx Akyeu The Package Includes: 1. Horizontal Multistage Pumps:4 units x Grundfos CM15-3 A-R-A-E-AQQE-A-A-N Motor Power: 4.0 kW (Motor Type: MG100LB)Flow Rate (Q): 17 m³/h (74.8 GPM)Nominal Head (H): 44.6 m (63.5 PSI)Max Head (Hmax): 51.1 m (72.7 PSI)Pressure Rating: Max 10 bar (145 PSI) / Max 90 °COrigin: 2. Industrial Valves & Fittings :Large batch of industrial butterfly valves (Blue body with manual lever handles for quick on/off flow isolation).Matching pipe connection segments and end caps. (please see photo) Condition: Used, clean, stored carefully in a dry box inside an indoor warehouse.