Windsor Food Machinery Limited

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Kdsdezvx Dkepfx Abner Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Date of manufacture - 2003. Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: like new (used), plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.300 mm infeed height : ± 800 mm total dimensions : ± 3.600 x 1.000 x 2.300 mm Kedpfxezvwq Aj Abnjdr adjustable speed mobile as new

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system Kdjdpfx Aszvwqpsbnor lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: used, loading : max. 2.800 kg (depending on the product) all stainless steel Kjdjzvwp Sspfx Abnsdr vacuum pump not included suitable for cooling PLC control adjustable speed tilting system to discharge 1 water filter dimensions (l x w x h) : ± 3.490 x 1.820 x 2.250 mm power: 5,9 kW

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m Kdedpfozvwplox Abnor width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyork Kjdpszvwpfofx Abnodr washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: used, all stainless steel belt width 400 mm mobile adjustable speed filling capacity 27 L weight: 390 kg dimensions (l x w x h): ± 2.860 x 750 x 1.450 mm With adjustable take-over outfeed conveyor Kjdpfx Aszvwnzjbnsdr

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 6.000 mm Kodpfx Aozvwnuobnodr nett belt width 600 mm adjustable speed sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 7.700 x 2.200 x 2.200 mm with oil circulation pump

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 004-2024, total length: 2,250 mm, total width: 950 mm, total height: 1,900 mm, overall weight: 740 kg, power: 6.5 kW (8.84 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Distance between saw blades: 45 mm MACHINE DETAILS Operating voltage: 400 V Kodpfxezvv Rne Abnjdr Frequency: 50 / 60 Hz Power: 6.5 kW Operating current: 14.5 A Dimensions & Weight Dimensions (L x W x H): 2,250 x 950 x 1,900 mm Machine weight: 740 kg EQUIPMENT Completely made of corrosion-resistant AISI 304 steel Two parallel saw blades Fully mechanized wheels Adjustable speed of the side blade The machine comes from a business liquidation.

Condition: reconditioned (used), Year of construction: 2016, Sanitary gate for hand disinfection Automatic hand disinfection station with a turnstile. The turnstile automatically dispenses disinfectant onto the hands. It is activated touchlessly using photocells. The sanitary gate is made of high-grade stainless steel 1.4301 and performs the following functions: Hand disinfection Ksdpozvrrbofx Abnsdr One-way traffic control Technical data: Material: Stainless steel 1.4301 Dimensions: 860 x 860 mm (W x D) Weight: 40 kg Power supply: 230 V Designed for hand disinfection Disinfectant spray activated touchlessly using photocells Equipped with a turnstile that allows passage only after the required actions have been performed. Light signaling (red-green) High throughput In the event of a power failure, the turnstile rotates freely in both directions – in compliance with occupational safety regulations. Video showing how it works:

Condition: refurbished (used), Year of construction: 2014, Technical specifications Product number A80 Year of manufacture 2014 Machine dimensions: 830 x 880 x 840 mm Rotation: Left, Right Weight: approx. 130 kg Protection rating: IP 69 Capacity: 80 l Model A 80 Capacity: 80 liters, 50/55 kg product Stainless steel construction Mixing arm with a single blade Forward and reverse mixing 3-phase motor power: 415 V 50 Hz 1.0 kW Kdedszvrnvepfx Abner Manual discharge with tilting Cover with safety lock Motor with frequency inverter Machine has undergone a complete overhaul and is ready for operation.

Condition: reconditioned (used), Year of construction: 2008, Technical Specifications Product Number BGR 300 Year of Manufacture 2008 Blade Length 2500 mm Table Dimensions 800 x 770 mm Distance from Arm to Blade 300 mm Distance from Table to Upper Product Height Limiter 335 mm Machine Height 1825 mm Power 2200 W Power Supply 400 V Machine has undergone servicing, with new bearings and consumables. Stainless steel table bandsaw with sliding table and fixed table as needed. All scrap collectors and wheels are in perfect condition. Machine used for cutting meat, fish, poultry, bones, cutlets, and other food products. Kdjdpozvrnpsfx Abner Equipped with a product limiter and safety brake. The saw automatically stops when the stop button is pressed or the door is opened. The saw has undergone a complete overhaul, is fully functional, and ready for use. The stated price is the net price.

Condition: refurbished (used), Product number 1225 Machine dimensions: 760 x 980 x 1320 mm (width x depth x height) Sieve diameter: 130 mm Weight: approx. 470 kg Power: 16 kW Power supply: 400 V 50Hz 5N Filling system: Auger Protection rating: IP 69 Kdjdpfxszvrgle Abnjr Capacity: 12 tons/8h Housing made entirely of stainless steel. Gearbox and motor overhauled. Device after major servicing, ready for operation.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 9,250 mm, total width: 1,200 mm, total height: 2,200 mm, overall weight: 1,500 kg, input voltage: 415 V, input frequency: 50 Hz, 2021 Complete Coating, Breading and Battering line, suitable for poultry, seafood, red meat, plant-based proteins, and cheese products. This system comprises of the following machinery: Manufacturer - Jinan Hiwell. Date of manufacture - 2021. 2 x DJJ100-II Batter Mixers mounted on mobile frame, and each fitted with a Flat Vane Pump. Mixing vessel capacity – 100 litres (per unit). 1 x SJJ600-IV Batter Coating machine with recirculating pump. While the products pass through the batter shower on the conveyer, the underside of the products are coated by the batter stored in the tank; the topside is enclosed with batter by the batter weir fall. 1 x SXJ600-IV Breading/Flouring Machine. This works as a continuous, automated system that applies an even, uniform layer of dry flour or breadcrumbs to food products. As products enter the machine, they ride on a wire-mesh conveyor belt that passes over a bed of flour or breadcrumbs, coating the underside of the food. Heavy-duty air blowers and vibrators remove loose, excess flour or crumbs from the coated products before they exit the machine. An integrated screw and circulation system continuously gathers, sifts, and recycles the unused flour or crumbs back into the hopper to maintain high material efficiency. 1 x NJJ600-IV Tempura Battering Machine. This machine automatically applies thick or thin tempura batters to products through an immersive dipping process. As food moves along the line, it travels between an upper and lower mesh belt that completely submerge the product into a batter bath, ensuring 100% coverage. It is built specifically to handle the high viscosity characteristic of traditional tempura batters. You can easily adjust the gap between the upper and lower mesh belts to accommodate products of varying sizes and shapes. Kdedpszvrfbefx Abnor Output capacity – up to 500 kg/h (approx.), subject to the product, belt speed, coating pickup, and product spacing. Electrical requirements – all machines are rated to 415 V / 50 hz / 3 phase. Useable wire mesh conveyor belt width – 600mm wide. Total line/system footprint dimensions – 9.25m long x 1.2m wide x 2.2m high.

Condition: used, Maja FP 100 Portion Cutter This volumetric portioning machine from Maja has been specially designed for accurately cutting products into equal portions. The machine is designed for portioning fresh, boneless cuts of meat, poultry, and game. The FP 100 is an efficient slicer capable of continuous cutting at speeds of up to 130 cuts per minute. The machine is height-adjustable, allowing it to be easily integrated into a production line. The last cut that does not meet the specified portion value is automatically discharged onto a separate conveyor belt. The hygienic design of the machine ensures that the product only comes into contact with the cutting chamber, knife, and conveyor belt. It is an ideal machine for portioning pork (rump, silverside, flank, neck, loin), beef (roast beef, rump, entrecôte, leg, fillet), and turkey. This portioning slicer is completely manufactured from stainless steel. Technical specifications: - Production capacity: 130 portions/min Ksdszvrdwjpfx Abnsdr - Cutting speed: continuously adjustable - Infeed and outfeed height: 940–980 mm - Voltage: 400 V (3+N, 50 Hz) - Power: 19 kW - Compressed air requirement: 8 bar - Weight: 1,500 kg - Year of manufacture: 2010 - Machine dimensions (W × D × H): 2,050 × 1,080 × 1,850 mm

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm Ksdpfx Abszvpntjnjdr 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: used, loading : max. 2000 to 2200 kg (depending on the product) all stainless steel vacuum pump not included Lutetia control adjustable speed Kdedozvpngepfx Abnjr tilting system to discharge 1 water filter dimensions (l x w x h) : ± 3.600 x 1.550 x 1.990 mm

Condition: used, all stainless steel belt width 1.000 mm adjustable speed 0,75 kW dimensions (l x w x h) : ± 1.750 x 1.300 x 1.350 mm Kjdpfxjzvpnaj Abnedr

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm Kjdpfxszvpm Nj Abnjdr dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: used, continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable Kjdpfx Abjzvpmvensdr nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed dimensions (l x w x h) : ± 3.400 x 1.800 x 2.000 mm

Condition: used, all stainless steel nett belt length 3.000 mm nett belt width 400 mm Kdjdpfx Abszvpmponsr mesh width ± 8 mm suitable for thermal oil heating (= 120 kW) with top hold down belt oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with electrical hoists suitable for fire protection overall length : ± 5.400 mm overall width : ± 1.500 mm New electric control box with new electrical components

Condition: good (used), functionality: fully functional, machine/vehicle number: 66/ 01 0027, used multi-purpose kitchen machine Solia M30, checked, works flawlessly, with extensive accessories, including various attachments such as planetary mixing, whisking and kneading attachments, a meat grinder for mincing meat and vegetables, various accessoories for vegetable processing, different cutting discs, 1.4 / 1.8 kW, 400 V, 50 Hz, 3.3 / 3.9 A, machine no. 66/ 01 0027, year of manufacture 2012, 28 x 65 x 32 cm (l x w x h) Ksdjzvhulopfx Abnedr

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, FREY F-LINE F260 + KL6 | Vacuum filler with an attachment for forming kebab slices (Kebab Line) Manufacturer: FREY Maschinenbau GmbH Model / Type: F-LINE F260 + KL6 Serial number: F260PT1392551 Year of manufacture: 2011 Power supply: 400 V / 50 Hz / 3-phase Kdedpezvgtgjfx Abner Power: 10.45 kW Filling capacity: up to 7,300 kg/h Maximum filling pressure: up to 50 bar Vacuum pump capacity: 21 m3/h Hopper capacity: approx. 300 liters Portioning range: 5 - 100,000 g Maximum portioning speed: up to 1,120 portions/min Control system: FREY Touch Control TC 733 touchscreen This set consists of a FREY F-LINE F260 vacuum lobe filler and an automatic FREY KL6 forming module, representing a professional, industrial line designed for continuous portioning and precise shaping of meat slices for the production of Döner Kebab rolls. The core of the filler is a modern, maintenance-free servo drive and a lobe pump system with an efficient vacuum pump (21 m3/h), ensuring optimal de-aeration of the filling, consistent weight, and an ideal cross-sectional structure of the finished product. The FREY KL6 system significantly automates and speeds up the process of arranging meat slices with a constant diameter and thickness, eliminating the need for manual portion selection and reducing labor costs. This set is ideally suited for meat processing plants, companies producing semi-finished products for the HoReCa industry, and specialized kebab manufacturers. The user-friendly FREY TC 733 control panel with a digital interface allows for storing up to 200 recipes and dynamically adjusting operating parameters in real time.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Treif bacon slicer Type Felix 100 CE Equipped with a slicing blade set for strips, 4 x 48 mm Year of manufacture: 2003 Kdodszvgtajpfx Abnjr Other blade set sizes available upon request.

Condition: like new (used), Year of construction: 2016, operating hours: 1,800 h, Bowl Chopper Make: Seydelmann Kjdpfozvgmgsx Abnedr Model: K126 H AC 2016 Low hours All stainless With unloader