Mis Doga Organik Kuru Temizleme Ltd. Sti.

Year of construction: 2004, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 600 mm Fgjdpfx Abex E Eins Tjk MAX TURNING LENGTH: 670 mm MAX TURNING DIAMETER: 490 mm BAR CAPACITY: 80 mm SPINDLE: 3500 rpm; 22 kW; 539 Nm; ASA 8" ; 315 mm X-AXIS TRAVEL: 255 mm Z-AXIS TRAVEL: 670 mm RAPID FEEDS X-Z: 20 - 24 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC 31iT WEIGHT: 6000 Kg OVERALL DIMENSIONS: 445 x 190 x 210 mm ACCESSORIES: SWARF CONVEYOR

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 30 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-3000 Fgedjx E Eihjpfx Ab Tsk CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: used, mileage: 439,510 km, power: 330 kW (448.67 HP), first registration: 10/2020, fuel type: diesel, maximum load weight: 10,032 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: retarder, color: green, driver cabin: other, gearing type: other, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: air conditioning, cruise control, navigation system, onboard computer, parking heater, This offer is non-binding. Subject to prior sale and errors excepted. If a foreign currency is indicated, it is based on the current daily exchange rate. The valid currency is that of the vehicle's location. Engine: OM471, inline 6, 12.8 L, 330 kW (449 HP), 2200 Nm, High Performance Engine Brake, Predictive Powertrain Control, front axle air suspension, rear axle air suspension, Lowliner, axle load measurement system, electronic parking brake, secondary water retarder, wheelbase 3700 mm, tank 660 L + 75 L AdBlue (aluminum), with entry steps, electric sliding/lifting glass sunroof, L-cab, cab width 2.50 m, BigSpace, adjustable roof spoiler with end flaps, exterior transparent sun visor, compressed air horns (cab roof), LED daytime running lights, leather steering wheel, upper comfort bed (wide, level-adjustable), lower comfort bed, one-piece electric sunblind for the front windscreen, LED ambient lighting (driving & living), table on passenger side, interactive multimedia cockpit, refrigerator (drawer type, under bed), electric stationary air conditioning, automatic climate control, auxiliary hot water heater, comfort driver's air-suspended seat, rain sensor, bi-xenon headlights, LED rear lights, headlight cleaning system, lane keeping assist, distance control assist, attention assist, traffic sign assist, driver's airbag, cruise control, comfort telephony with wireless charging, navigation system, Volumer Fodpfx Asx E Eibob Tsgk

Condition: excellent (used), The DNDA type pointer–chamfering machine is designed for forming conical points or chamfering the ends of shafts, rods, and stakes. Feeding and rotation of the workpiece are performed manually. Min. length of workpieces: 700 mm Disc rotational speed: 1060 rpm Number of cutting knives: 6 pcs Fsdpfx Asx E Eh Rsb Tsgk Motor: 4 kW Extractor nozzle diameter: Ø 160 mm Required air flow for chip extraction: 850 m3/h Table height above floor: 730 mm Overall dimensions: Length: 960 mm, Width: 880 mm, Height: 1300 mm Weight: 280 kg

Condition: used, mileage: 499,287 km, first registration: 12/1995, fuel type: diesel, color: orange, axle configuration: 6x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1995, = Additional options and equipment = - Power Take-Off (PTO) = Additional information = Fedpfx Aox E Egysb Togk Technical information Number of cylinders: 6 Axle configuration Suspension: Leaf suspension Front axle: Steered Rear axle 1: Twin tires; Reduction: External planetary axles Rear axle 2: Twin tires; Reduction: External planetary axles Dimensions and weights Gross vehicle weight: 26,000 kg Dimensions (L x W x H): 790 x 250 x 324 cm Functional Bodywork brand: AJK Pump: Yes Financial information Price: On request Further information Contact Thierry Leemans for more details.

Condition: ready for operation (used), Year of construction: 2016, General Data Machine weight 11000 kg Measurements height 3100 mm Control Unit Brand FANUC Model Series 0i-TD Dimensions Machine Length 2750 mm Main Drive Fsdpfx Aox E Egmob Tsgk Spindle motor power 30 kW Number of axis 2 This DEFUM KNA-110 S0 vertical turning machine was manufactured in 2016. It features a maximum swing with upper support of 1350 mm and a table diameter of 1100 mm, supporting workpieces up to 4000 kg. The table speed range is 6.3–200 rpm with 16 speed steps. Main motor power is 30 kW. If you are looking to get high quality turning capabilities consider the DEFUM KNA-110 S0 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 2600 kg Measurements height 2300 mm Dimensions Fgsdpox E Eggefx Ab Tek Machine Length 6060 mm This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, Control Unit Brand FANUC Model iSeries Table Table load 400 kg Main Drive Number of axis 4 Spindle Speed 10000 RPM Tool taper BT 40 Movement X-Axis Movement 800 mm Z-Axis Movement 500 mm Fgodpsx E Egaefx Ab Tjk Y-Axis Movement 500 mm This 4-axis DOOSAN DNM 4500 was manufactured in 2016. It features X/Y/Z travel of 800 x 500 x 500 mm, a table size of 1000 x 500 mm, and a maximum table load of 400 kg. The spindle operates at 10,000 RPM with a BT40/CAT40 taper, complemented by a 24-position ATC. Rapid traverse rates are 30 m/min for X/Y and 18 m/min for Z. Includes a coolant system and full safety enclosure. Contact us for more information. Application Types Milling

Year of construction: 2000, condition: ready for operation (used), This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine. Fgedpfx Asx E Ef Nob Tsk Application Types Other Sheet Metal Machinery

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 6500 kg Measurements height 2500 mm Dimensions Fjdpsx E Ef Ajfx Ab Togk Machine Length 2800 mm Main Drive Number of axis 3 Spindle Speed 8000 RPM Spindle motor power 7.5 kW Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2002. It features a spindle speed of 8000 rpm, a 24-pocket tool magazine, and a robust 6500 kg construction for stability. The compact design allows for efficient use of workshop space, while the high load capacity of 800 kg supports a variety of applications. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 103 V machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2024, condition: ready for operation (used), Main Drive Number of axis 4 Spindle motor power 9 kW Movement X-Axis Movement 2100 mm Z-Axis Movement 400 mm Y-Axis Movement 3050 mm Fjdpfx Absx E Efvj Togk This 4-axis QUICK CNC UA 481 was manufactured in 2024. It features a 2100 x 3050 x 400 mm working area, a 9 KW HSD/HSK F 63 spindle, and a double layer vacuum table with 6 zones. Equipped with a Yaskawa servo motor and two Becker pumps at 250 m3/h each, it's ideal for advanced woodworking. Consider the opportunity to buy this QUICK CNC UA 481 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types CNC Wood Machining

Year of construction: 2023, condition: ready for operation (used), General Data Machine weight 175 kg Fgjdpsx E Efpefx Ab Tek This Zoller Smile 420 was manufactured in 2023. It features image processing technology with a Z-axis length of 400 mm and an X-axis radius of 200 mm. The machine supports a maximum diameter of Ø400 mm and requires a compressed air pressure of 4–6 bar. Ideal for precise optical measurements, consider the opportunity to buy this Zoller Smile 420 optical measurement machine. Contact us for more information about this machine. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2014, This Yaskawa DX100 was manufactured in 2014. It's a welding robot like new, with minimal operating hours. Features include a rotary table for dual workpiece processing (1000 × 1500 mm) and a wire feeder for overlay welding. It's equipped with a high-performance TIG welding system. Technical support is available via ROBOTECO S.p.A. Contact us for more information about this machine. Application Types Welding Fgodpox E Efiofx Ab Tek

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements height 2500 mm Dimensions Machine Length 2300 mm Control Unit Brand CYBELEC Model DNC 60 Fgodpfsx E Efcsx Ab Tek Main Drive Number of axis 3 Bending length 1330 mm Pressing force 245 Kn This 3-axis ADIRA QHD-2512 PLC press brake was manufactured in 2009. It features a Cybelec DNC 60 control unit, a pressing force of 245 kN, and a bending length of 1330 mm. The distance between columns is 1250 mm, and it operates at a working speed of 8 mm/s. If you are looking to get high-quality bending capabilities, consider the ADIRA QHD-2512 PLC machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 5500 kg Measurements height 2634 mm Control Unit Brand FANUC Model 18-M Main Drive Spindle Speed 10000 RPM Spindle motor power 9 kW Tool taper BT 40 Number of axis 4 Movement X-Axis Movement 800 mm Z-Axis Movement 505 mm Y-Axis Movement 500 mm Tools Max weight 6 kg Dimensions Machine Length 2530 mm Table Table load 500 kg Fgjdsx E Ed Sjpfx Ab Tok This 4-axis ANAYAK 8-HS was manufactured in 2001. It features a Fanuc 18-M CNC, with travels of 800 x 500 x 505 mm, and a table that can support up to 500 kg. The spindle operates at 10,000 rpm with a BT 40 taper and has a power of 9 kW. It includes a 24-position tool changer and additional equipment like a 4th axis, spindle cooler, and chip conveyor. Consider the opportunity to buy this ANAYAK 8-HS vertical machining center. Contact us for more information. Application Types Milling

Year of construction: 2010, operating hours: 27,928 h, condition: ready for operation (used), This 3-axis TRUMPF TruLaser 5030 + LiftMaster + Stopa was manufactured in 2010. It features a 7000-watt CO2 resonator and handles a maximum sheet size of 3000x1500mm. The system includes a LiftMaster and a Stopa storage system with 85 pallets and a 255-ton capacity. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 machine we have for sale. Contact us for more information. Fodsx E Ed Espfx Ab Tsgk Application Types Cutting

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 6800 kg Measurements height 2808 mm Dimensions Machine Length 2929 mm Table Table load 1200 kg Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 18.5 kW Movement X-Axis Movement 1050 mm Z-Axis Movement 510 mm Y-Axis Movement 530 mm Tools Max weight 8 kg This 3-axis Mazak VCS 530C vertical machining centre was manufactured in 2014. It features a table size of 1300x550 mm, X/Y/Z travels of 1050/530/510 mm, and a maximum spindle speed of 12000 min⁻¹. The machine supports a table load up to 1200 kg and includes a 30-tool magazine with a rapid tool change time of 2.8 seconds. Consider the opportunity to buy this Mazak VCS 530C vertical machining centre. Contact us for more information about this machine. Fodpfx Abox E Edxe Tegk Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 6350 kg Fgsdox E Edropfx Ab Tsk Control Unit Brand HAAS Main Drive Spindle speed range 12000 rpm Number of axis 4 Movement X-Axis Movement 1270 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Tools Type of tool holder BT 40 This 4-axis HAAS VF-4SS was manufactured in 2012. It features a BT 40 tool holder and a maximum spindle speed of 12,000 rpm, suitable for a variety of machining tasks. Consider the opportunity to buy this HAAS VF-4SS vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 3720 kg Fsdpfjx E Edlsx Ab Tjgk Control Unit Brand HAAS Main Drive Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 406 mm Z-Axis Movement 508 mm This 3-axis HAAS VF-2SS vertical machining center was manufactured in 2011. It features a 12,000 rpm spindle speed and a table size of 356 mm by 914 mm. With X, Y, and Z travels of 762 mm, 406 mm, and 508 mm respectively, it handles a variety of machining tasks. Consider the opportunity to buy this HAAS VF-2SS vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2020, This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine. Application Types Fedpfx Aex E Edfsb Togk Cutting

Year of construction: 2016, condition: ready for operation (used), General Data Fgodpfx Absx E Ec Ue Tek Measurements width 3850 mm Measurements depth 4670 mm Measurements height 2400 mm Additional Equipment Options included: Single-sided brush blower DSGT This CEFLA MITO K was manufactured in 2016. Ideal for woodworking, it offers robust performance and reliability. Consider the opportunity to buy this CEFLA MITO K woodworking machine. Contact us for more information. Application Types Other Woodworking Machinery

Year of construction: 2010, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D SL Main Drive Tool taper HSK-E 32 Number of axis 5 Movement X-Axis Movement 120 mm Y-Axis Movement 120 mm Z-Axis Movement 200 mm Fgjdpsx E Ec Iefx Ab Tsk This 5-axis DMG ULTRASONIC 10/ DENTAL 10 was manufactured in 2010, featuring a universal machining center with X/Y/Z travels of 120/120/200 mm. It includes a rotating CNC table, work spindle with HSK-E 32 attachment, and a maximum rotation speed of 40,000 rpm. The machine also boasts an automatic tool changer with 16 stations and Siemens 840D control system. If you are looking to get high-quality milling capabilities, consider the DMG ULTRASONIC 10/ DENTAL 10 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Year of construction: 2004, condition: ready for operation (used), General Data Measurements width 1600 mm Machine weight 3000 – 3500 kg Measurements depth 2500 mm Main Drive Spindle speed range 4000 Spindle motor power 7.5 kW Spindle bore 52 mm Number of axis 2 Workpiece Workpiece drm over bed 520 mm Workpiece drm over support 310 mm Fgodpfex E Eczex Ab Tjk Turret Number of turrets 1 Tools Number of station 8 or 12 This ECOCA SJ-20 was manufactured in 2004. A robust horizontal turning machine featuring a swing over bed of approximately 520 mm and a max turning length of 500 mm. It includes a spindle speed of up to 4,000 rpm and a powerful 7.5 kW spindle motor. Ideal for precision turning, it also offers an 8 or 12-station turret. Footprint approximately 2.5 m x 1.6 m. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,574 h, General Data Machine weight 13000 kg Measurements height 2082 mm Main Drive Punching force 200 Kn Control Unit Brand AMADA Model AMNC-F Dimensions Machine Length 4165 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1270 mm This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information. Application Types Punching Fedox E Ecuspfx Ab Tjgk

Condition: ready for operation (used), Year of construction: 2008, operating hours: 7,793 h, General Data Machine weight 13600 kg Measurements height 3460 mm Main Drive Number of axis 5 Spindle Speed 12000 RPM Tool taper SK 40 Control Unit Brand HEIDENHAIN Model iTNC 530 Movement X-Axis Movement 800 mm Z-Axis Movement 800 mm Y-Axis Movement 800 mm Dimensions Machine Length 5830 mm Fgjdpfx Aox E Ecnsb Tjk This 5-axis DECKEL MAHO DMU 80 P duoBLOCK was manufactured in 2008. It features a travel range of 800/800/800 mm, a spindle speed up to 12,000 rpm, and a SK 40 tool holder. Equipped with a Heidenhain iTNC 530 control, internal coolant supply at 40 bar, and a chip conveyor. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling