Sesinox Makine

Condition: used, Used MOLTENI dissolver 15 kw - Hp 20 - 3x 380 volts Gedpsx Hwkyjfx Ag Douk Turbine Ø 300 mm

Condition: used, axle configuration: 3 axles, first registration: 04/2010, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,780 mm, total length: 13,860 mm, total width: 2,550 mm, wheelbase: 9,000 mm, Year of construction: 2010, Equipment: ABS, = Additional options and equipment = Gsdpfx Agex Hwktj Djuk - Rear doors - Air suspension = Further information = Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Unladen weight: 6,700 kg Payload: 32,300 kg Gross vehicle weight: 39,000 kg Please contact Gert Woudenberg for further information.

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: VLA 180S, cooling capacity: 190 kW (258.33 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,850 kg, ambient temperature (max.): 35 °C, ambient temperature (min.): -15 °C, input voltage: 400 V, pressure: 2.5 bar, temperature: 7 °C, volume flow: 23 m³/h, pump pressure: 2.5 bar, total width: 2,240 mm, total length: 2,920 mm, total height: 2,510 mm, power: 190 kW (258.33 HP), input current: 296 A, Equipment: compressor, type plate available, Used chiller by VTRT International (York) Refrigerant: R410a 2 cooling circuits 5 compressors Plate heat exchanger V-type condenser There are 3 units available. The frames show rusty spots (manufacturing defect), but the cooling system functions properly. Guedpfx Aox Hwkmjg Dok

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 030381, turning diameter: 120 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 96 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 1,600 mm, total width: 1,100 mm, quill diameter: 35 mm, quill stroke: 110 mm, overall weight: 2,000 kg, controller manufacturer: FANUC, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, SPINNER TC 32-MC CNC Lathe Gusdpfxjx Hwkgs Ag Dsk - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 32 A - Max. swing diameter over bed: 290 mm - Spindle head diameter: 100 mm - Max. chuck diameter: 125 mm - Spindle bearing diameter: 70 mm - Tailstock travel: 100 mm - Rotational speed of driven tools: 6000 rpm Note: Without the tool holders shown in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 at a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: used, mileage: 384,000 km, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 8x4, tire size: 385/65 R 22.55, fuel: diesel, wheelbase: 6,700 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, trailer coupling, = Further options and accessories = - AdBlue system - Leaf suspension - Digital tachograph - Electric windows - Hub reduction - Radio/CD player - Reversing camera - Sun visor - Power take-off (PTO) - Central locking - Towing jaw = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,419 cc Drivetrain AdBlue system: Yes Axle configuration Front axle 1: Tire size: 385/65 R 22.5; Steered; Tire tread left: 35%; Tire tread right: 35%; Suspension: leaf suspension Front axle 2: Tire size: 385/65 R 22.5; Steered; Tire tread left: 35%; Tire tread right: 35%; Suspension: leaf suspension Rear axle 1: Tire size: 315/80 R 22.5; Dual tires; Inner left tread: 70%; Outer left tread: 70%; Inner right tread: 70%; Outer right tread: 70% Rear axle 2: Tire size: 315/80 R 22.5; Dual tires; Inner left tread: 80%; Outer left tread: 80%; Inner right tread: 80%; Outer right tread: 80% Dimensions Dimensions (L x W x H): 1051 x 255 x 370 cm Weights Empty weight: 21,262 kg Payload: 19,738 kg Gedpfx Aox Hwi Nsg Djuk Gross vehicle weight (GVW): 41,000 kg Functional Crane: PALFINGER PK 40002 EH, year of manufacture 2018, rear-mounted on chassis Platform height: 145 cm Condition Damages: none

Condition: used, mileage: 778,000 km, power: 355 kW (482.67 HP), first registration: 09/2017, fuel type: diesel, tire size: 3865 R 22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, parking heater, second fuel tank, spoiler, = Additional Options and Accessories = - 4x2 - Aluminum fuel tank - Roof spoiler - Digital tachograph - Air suspension - Radio/CD player - Sleeper cab - Side skirts - Sun visor = Further Information = General Information Cab type: SUPER SPACECAB Registration number: 18-BJX-4 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Front axle: Tire size: 3865 R 22.5; Steered axle; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: leaf spring Rear axle: Tire size: 315/70 R 22.5; Twin tires; Inner left tire tread: 15%; Outer left tire tread: 15%; Inner right tire tread: 15%; Outer right tire tread: 15%; Reduction: single reduction; Suspension: air suspension Guodox Hwi Aopfx Ag Dok Weights Unladen weight: 8,417 kg Payload: 12,083 kg Gross vehicle weight: 20,500 kg Condition Damages: none

Condition: used, empty load weight: 6,020 kg, maximum load weight: 28,980 kg, overall weight: 35,000 kg, first registration: 08/2005, next inspection (TÜV): 10/2025, loading space length: 8,250 mm, loading space width: 2,420 mm, loading space height: 1,800 mm, loading space volume: 35 m³, suspension: air, tire size: 385/65 R 22,5, wheelbase: 1,310 mm, color: yellow, gearing type: other, front tire size: 385/65 R 22,5, driver cabin: other, emission class: none, 36 cbm Access steps on both the left and right sides in the direction of travel, 36 cbm capacity, tipping cylinder renewed in 2024, ECAS with control unit, discharge height: 1,120 mm, 1st driving position: 1,220 mm, 2nd driving position: 1,270 mm. The offer price does not include TÜV inspection or customs registration plates. • Aluminium rims Gujdpfxsx Hwive Ag Dek • Operator's stand • BPW axles • Pressure gauge • Single wheel mudguards • Single lift axle • Low-pressure tipping cylinder • Tarpaulin cover • Reversing lights • Folding underride guard • Central lubrication system We expressly reserve the right to prior sale, as this item is also advertised on other platforms. Accessory details are provided without guarantee, subject to change, prior sale, or errors. We offer and strongly recommend an inspection and assessment to ensure buyers have an accurate understanding of the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. We take care of all the formalities and can deliver the vehicle with the requested temporary registration plates for an additional charge. Some images have been digitally altered and serve only as an initial impression; if interested, please contact us and request current photos.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Very nice forklift, in excellent condition Year of manufacture: 2012 Capacity: 1400 kg Operating hours: 3775 hours Max lifting height: 5400 mm (triplex free lift) Incl. charger Weight display Battery in good condition (can be tested) Guodex Hwiiopfx Ag Dek

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 030180, turning diameter: 120 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 96 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 1,600 mm, total width: 1,100 mm, quill diameter: 35 mm, quill stroke: 110 mm, overall weight: 2,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, SPINNER TC 32-MC CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 32 A - Max. swing diameter over bed: 290 mm - Spindle head diameter: 100 mm - Max. chuck diameter: 125 mm - Spindle bearing diameter: 70 mm - Tailstock travel: 100 mm - Rotational speed of driven tools: 6000 rpm Note: Without the tool holders shown in the photos! Gusdpfx Agsx Hwh Se Djk Attention: The item must be collected definitively between 04 and 12 March 2026 at a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Year of construction: 2007, operating hours: 20,279 h, machine/vehicle number: IntNr231447, CNC Swiss-Type Lathe STAR SR-20RII, Year 2007 Machine type: CNC Swiss-type sliding headstock lathe Control: Fanuc, Series 18i-TB Power-on hours: 20,279 h Operating hours: 67,058 h Technical Specifications: Machining capacity: Max. turning diameter: Ø 20 mm (optionally up to 22 mm) Max. turning length: 205 mm Main spindle: Spindle speed: up to approx. 10,000–12,000 rpm Power: approx. 3.7–5.5 kW C-axis drive Sub-spindle: Spindle speed: up to approx. 6,000–8,000 rpm C-axis drive Axis configuration: X1 / Z1 / Y1 (main machining) X2 / Z2 (sub-spindle) Rapid traverse: approx. 24–30 m/min Machine dimensions: 2400 × 1205 × 1700 mm Machine weight: approx. 2,200 kg Bar Feeder: Type: FMB TURBO 3-26/3200 Bar diameter capacity: Ø 3–26 mm Mounting version: Type "A" Year of manufacture: 2007 Bar feeder dimensions: approx. 4,500 × 1,000 × 1,800 mm Bar feeder weight: approx. 800 kg Subject to prior sale. Technical data and details subject to change or error. Gsdpsx Hwh Ejfx Ag Douk

Condition: used, Year of construction: 2014, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Gjdpfx Agox Hwhxj Dsuk - Year: 2014 - Documentation available: No - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Deckel Maho DMU 50 EVO Linear with ITNC 530 About the Machine: Fast and flexible 5-axis simultaneous milling machine in excellent condition. Fully equipped! Suitable for integration into an automated system! Technical Data: - Control: Heidenhain ITNC 530 - Travel X-, Y-, Z-axis: 500/450/400 mm - Rotary axis travel B-, C-axis: 161.955°/360° - Clamping surface rotary table: 500 x 380 mm - Rapid traverse X-80 m/min, Y-50 m/min, Z-50 m/min, B-40 rpm, C-50 rpm - Spindle speed: 20–18,000 rpm - Tool holder: SK40 - Tool magazine with 60 stations - Network interface - Automation connection possible Accessories: - Internal cooling with belt filter system - Work space rinsing - Heidenhain TS 649 measuring probe - Coolant/air blast selection via M-function - Oil mist extraction - Rinsing gun - Chip conveyor - Handheld control unit Machine dimensions (L x W x H): 3800 x 3200 x 2800 mm Weight approx. 6500 kg An inspection and test run under power at our facility is of course possible. We are pleased to offer you transport, installation, and commissioning at your location. Everything from a single source: Guodpex Hwhrofx Ag Dok We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and those of other renowned manufacturers. We support you! From the purchase of your machine, through transport and installation, to commissioning and subsequent maintenance or repair work – you can count on us.

Condition: good (used), Year of construction: 2004, NAGEL/TBT BW-30-3000 Deep Hole Drilling Machine Year of manufacture: 2004 Control: SIEMENS SINUMERIK 840D Drilling depth up to 3,000 mm Drilling diameter max. 27 mm / min. 16 mm Axes: 3 Max. feed: 140 mm/min Table X-axis: 950 mm Working area in X-axis: 900 mm Working area in Z-axis: 1,750 mm Coolant capacity: 2,400 l Table load capacity: 4,000 kg Cooling system type: KA-1 Table size: 3,300 mm x 950 mm Feed rate up to 7,000 mm/min Power: N = 7.5 kW Speed: 650 – 6,500 rpm Automatic central lubrication Hydraulic drive for drill guide bush Magnetic chip conveyors All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery includes only those accessories which are expressly listed here, in the order confirmation, and in the invoice. Gsdpfx Ajx Hwhlsg Douk FCA (Free Carrier – Loaded on Truck) D-95447 Bayreuth Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon conclusion of sale

Condition: good (used), functionality: fully functional, machine/vehicle number: 14736259, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 2,100 mm, total length: 1,800 mm, total width: 1,500 mm, overall weight: 2,000 kg, HYUNDAI HIT-8 S CNC lathe - Operating voltage: 380 V - Frequency: 50/60 Hz - Rated current: 24 A - Connection: 25.5 kVA Gedpfx Aox Hwhfog Deuk Note: The item must be collected between 04 and 12 March 2026 on a specific date to be agreed upon in advance. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 392 h, load capacity: 300 kg, lifting height: 10,100 mm, lifting power: 300 kg/m, platform length: 1,600 mm, platform width: 890 mm, overall weight: 3,430 kg, transport length: 2,540 mm, transport width: 890 mm, transport height: 2,480 mm, construction height: 2,480 mm, fuel type: electric, tire size: Ø 410 × 150 mm, tire condition: 70 %, color: blue, Equipment: UVV, === KEY SPECIFICATIONS === Year of manufacture: 2015 Hours: 392 Machine width: 0.89 m Drive system: 2-wheel drive Driveable at full height: Yes Extendable platform: Yes (manual, 1.50 m) Gsdpfx Agox Hwg Uo Deuk Power: Electric (24 V) Working height: 12.0 m Platform capacity: 300 kg Drive type: Electric Battery type: Lead-acid (Deep Cycle) – 24 V / 280 Ah Self-levelling outriggers: No Platform dimensions (L × W): 1.60 × 0.89 m (extendable up to 2.04 m) Tyre type: Non-marking (Cushion Soft) CE certified: Yes Weight: 3,430 kg Indoor / Outdoor use: Both === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified with full documentation included Very low hours (only 392 hours) Driveable at full working height Extendable platform for increased reach === CONDITION === Clean, original condition with well-maintained systems. Battery tested and in good working condition. Non-marking tyres in good condition. Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable Italian-built electric scissor lift from AIRO, suitable for both indoor and outdoor use. Thanks to its very low hours, compact dimensions and driveability at full height, this machine is ideal for maintenance and installation work. Part of the professional fleet of Collé Rental & Sales. === DELIVERY === Crane loading available on request for smooth transport. Flexible shipping options tailored to your destination and logistics requirements. All transports are professionally handled by the logistics team of Collé Rental & Sales.

Condition: used, first registration: 01/2010, AIR SUSPENSION SELF-STEERING AXLES Guodpsx Hwg Ijfx Ag Djk SOLD AS IS

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe - Operating voltage: 200 V Gjdpfxsx Hwgue Ag Douk - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 17.8 kVA The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, overall weight: 601 kg, construction height: 406 mm, construction width: 355 mm, Submission of a bid obliges the buyer to collect the item by 14/01/2026! TECHNICAL DETAILS Build volume: 406 mm x 355 mm x 406 mm Layer thicknesses: 0.127 mm, 0.178 mm, 0.254 mm, 0.330 mm Cartridge volume for build and support material: 1,510 cm³ / 3,020 cm³ Achievable accuracy: ± 0.127 mm or ± 0.0015 mm/mm Gedpfsx Hwgnsx Ag Deuk Z-precision: −0.000 / +layer height MACHINE DETAILS System size: 1,295 mm x 902 mm x 1,984 mm Weight: 601 kg Input voltage: 420 V Supply voltage: 208 V AC Phases: 3 Frequency: 50/60 Hz Current consumption: 18 A Network connection: 10/100 Base-T Protocol: Ethernet Standards: CE, cTUVus, RCM, EAC, FCC Part B EQUIPMENT Insight™ software Control Center™ software GrabCAD Print compatibility SCA 1200HT support material cleaner Compatible with iSQUARED materials: ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, ULTEM 1010 Note: One of the two cartridges needs to be serviced.

Condition: good (used), Year of construction: 2009, WAGNER/TRENNJÄGER PMC 12 S Plate Circular Saw Year of manufacture: 2009 Machine number: 200 Equipment: Round material up to 360 mm Square stock 300 mm x 300 mm Section 1,000 mm x 150 mm For further data, see brochure Additional: 2nd saw blade, diameter 910 mm Included in delivery: Operating manual/documentation Equipment, operation, transport, machine overview & manufacturer’s brochure – see PDF. Illustration, content, and details are non-binding and subject to change. All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. Only the accessories expressly listed here, in the order confirmation and invoice, are included in the scope of delivery. Guedpfex Hwghjx Ag Djk FCA (Free Carrier Loaded Truck) D-04643 Geithain Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon conclusion of sale.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: M034362CAFG, turning length: 209 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,200 mm, total length: 3,500 mm, total width: 2,000 mm, feed length X-axis: 170 mm, feed length Z-axis: 335 mm, quill diameter: 60 mm, overall weight: 4,000 kg, bar passage: 51 mm, controller manufacturer: FANUC, controller model: SERIES 0i-TD, number of slots in tool magazine: 12, HWACHEON VUTEX - 160 B MC CNC Lathe - Operating voltage: 400 V Gusdpfxjx Hwf Re Ag Dsk - Frequency: 50 Hz - Rated current: 75 A - Swing diameter over bed: 550 mm - Speed of driven tools: 5000 rpm The machine is equipped with a 12-position tool changer, including driven tool stations and a chip conveyor. Note: Does not include the tool holders visible in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 on a date to be coordinated. FCA D-75181 Pforzheim – loaded on truck

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck. Gjdpfjx Hwfqjx Ag Deuk

Condition: good (used), Year of construction: 2015, SPINNER VC 750 Vertical Machining Center with Equipment Year of manufacture: 2015 Control system: HEIDENHAIN TNC620 V2 Machine number: BV 0845 Travel distances: X – 760 mm / Y – 460 mm / Z – 460 mm Equipment: - High-performance machining center with HEIDENHAIN TNC620 V2 - Chip conveyor V2 - SPINNER SPOTLIGHT-LED work area lighting - Double-arm tool changer for 32 tools - High-pressure coolant system 22 bar (auxiliary tank) V2 350 l - Pneumatic coolant nozzle at the spindle head - TNC software option "Probe functions" - Workpiece touch probe system BLUM TC52 - Tool holder SK40 / for probe TC52 Gusdpfxex Hwfke Ag Dok Scope of delivery includes: - Tool holders - Hydraulic clamping vice - Storage table - Operating manual/documentation - Machine parameters on data storage device Equipment, technical data, and transport – see PDF. Illustrations, specifications, and details are provided without guarantee and are therefore non-binding. All additional accessories visible in the photos are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery includes only the accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier Loaded on Truck) D-04643 Geithain Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon purchase

Condition: used, Used NAUTAMIX Stainless Steel Mixer No. 20095 Similar to the Type MBX10 Useful capacity : 1000 litre Guodpfex Hwfdjx Ag Dek Gear motor : 0.37 kw – Hp 0.5 – Rpm 58 – 3x 220/380 volts Motor : 3 kw – Hp 4 – Rpm 1500 – 3x 380 volts

Condition: used, Used mild steel Cumberland blade mill type 56T Granulator Hp 10. Unit has (3) rotor blades. Milling chamber measures 200mm diameter x 1450mm long. Driven by 7.5kW/10HP 380/660 Volt 975 rpm motor. Gusdpfx Agsx Hwd Te Dok

Condition: used, Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is equipped with 3 stainless steel lids, each with lenght 90 cm. Cover under the section where discharge is located is equipped with inspection manway with diameter 30 cm and stainless steel round lid. Inlet to conveyer has dimensions: 30 cm x 55 cm. Outlet has dimensions 28 cm x 30 cm. Machine has local control panel and is mounted on 4 wheels. Last time used in food industry. Gsdpjx Hwd Hjfx Ag Djuk