Hydraulic press brake

TRUMPF TrumaBend V130

Condition: ready for operation (used), Year of construction: 2004, Operating hours: 41,116 h, General Data Measurements width 3640 mm Measurements depth 2210 mm Measurements height 2900 mm Machine weight 12950 kg Control Unit Brand Delem Main Drive Pressing force 1300 kN Bending length 3060 mm Number of axis 4 This Trumpf Trumabend V130 Bending machine was manufactured in the year 2004 in Austria and has 41116 production hours. It is equipped with a Delem control unit and has 4 axis. The machine has a pressing force of 1300 kN and a bending length of 3060 mm. Ginqns Application Types Bending

Condition: good (used), Year of construction: 2002, In good technical condition and fully functional. Year of manufacture 2002. Pressing force 1300 kN. Length of folding 3050 mm. Cxq83a7c2 Processed sheet thicknesses 0.5 mm – 8 mm. Stroke 215 mm. 6-axis stop and manual bombing.

Condition: good (used), Year of construction: 1999, Nominal forming force:130 t The machine is in a good technical condition, after previous agreement there is a possibility of testing. 1300 kN max pressing force: 215 mm max stroke Working pressure: 340 bar max delay: 67 ms Safety distance: 107 mm Press weight: 11250 kg Voltage: 3x400 V Rated current: 29,5 A Frequency: 50 Hz Power: 18,7 kVA Compressed air supply: 6 bar Ma9mgkrgcl

Condition: ready for operation (used), Year of construction: 2001, Neat second-hand folding machine / press-brake Trumpf TrumaBend V130 Capacity 3 metres x 130 tonnes Built in 2001 6-axis backgauge X1-R1-Z1-X2-R2-Z2 Wila clamping top and bottom Delem DA65, 2D graphical control Shift container ( I-axis ) for hemming operations Ucawtccjv Upper beam stroke 365 mm + large installation height / daylight opening

Condition: used, Year of construction: 1990, - Condition: to repair of control system ( error epron) or can be machine for spare parts Me32eerzvr - working lenght 3005 mm - weight 9200 kg

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements width 2100 mm Measurements depth 3190 mm Measurements height 2375 mm Machine weight 9950 kg Control Unit Brand HAAS Main Drive Pressing force 850 kN Stroke 365 mm General Data Measurements width 2100 mm Measurements depth 3190 mm Measurements height 2375 mm Machine weight 9950 kg Control Unit Brand HAAS Main Drive Pressing force 850 kN Stroke 365 mm This Trumpf TrumaBend V85S Bending machine was made in 1999. It is equipped with a HAAS control unit. The machine has a pressing force of 850 kN. Application Types Bending Fzenhvo

Condition: used, Year of construction: 2001, pressure 50 t chamfer lenght 1270 mm distance between columns 1040 mm stroke 215 mm throat 410 mm dayligth 385 mm back stop - adjustable 860 mm working feed 1 - 10 mm/sec return speed 135 mm/sec total power requirement 8,6 kVA weight of the machine ca. 4750 kg dimensions of the machine ca. 2000 x 2100 x 2400 mm - controlled axes: Y1, Y2, X, R - Pneumatic die shift - LAN network connection - 4 stop fingers manually adjustable, foldable to the rear, pneumatic clampable - CNC control, operation on the front left Cmllmwuynl - 2-hand operation / foot switch - rear + side protection

pressing force: 850 t, overall weight: 7,900 kg, Condition: good (used), Year of construction: 2003, Operating hours: 45,868 h, -4 axes -Without tools -Location: Germany, available immediately Cw39kqbv

Condition: used, Year of construction: 1999, pressure 50,0 t chamfer lenght 1275 mm distance between columns 1040 mm column arm 410 mm table width 100 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec stroke 215 mm tiltable up to +/- 10 mm table height 1050 mm dayligth 385 mm oil volume 80 ltr. travel -x axis 500 X-Weg mm traversing speed 300 R-Weg mm compressed air 6,0 bar total power requirement 8,0 KVA weight of the machine ca. 4750 kg. range L-W-H 2000 x 2000 x 2380 mm 7wnvnxe7 Machine with full equipment (all axes controlled)! Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - TRUMPF hydraulic upper tool clamping - TRUMPF hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - Rear safety device (sliding door) - Safety device on the side (pivoting door) - Operation manual * Special accessories included: - TRUMPF tool cabinet including various TRUMPF bending tools * Machine link: ?machineno=1008-9308349 * Machinevideo : ?v=segdogmeOFc

Condition: good (used), Year of construction: 2000, Nominal forming force:230 t Table length:3100 mm Dm8dtd The machine is in good technical condition, after previous agreement there is a possibility of testing.

Condition: used, Year of construction: 1999, CNC press brake TRUMPF type TrumaBend V 85 Machine No.: F1012F Make No.: 883389 Year of construction 1999 CNC control DELEM DA65 pressure capacity 85 ton. working length 2050 mm stroke 365 mm installation height 535 mm inclination of the pressure beam +/- 10 mm column passage 1750 mm offshore distance 410 mm table width 120 mm Working height with lower tool 1050 mm Max. stop range in X: 860 mm X-axis travel: 600 mm R-axis travel: 250 mm Z-axis travel: 1370 mm Y rapid traverse 200 mm/s Y-operation 1-11 mm/s Y-retract 135 mm/s Hydr. operating pressure 340 bar Oil filling approx. 200 liters Engine power 7,5 kW Djober Mains connection 400 Volt, 50 Hz connected load 14 KVA - pneumatic lower tool displacement - swivelling control panel with CNC 2D-graphic control DELEM DA 65 with 12" CRT screen - RS232 interface - foot and 2-hand operation - CNC backgauge with 4 axes X, R and Z1 + Z2 (the two stop fingers Z can be moved individually) - CNC crowning device for the bottom tool - Hydraulic tool clamping for upper and lower tool - 2 pieces foldable stop fingers - 2 pieces of front material support arms movable with clamping - Protection system on the upper beam BendGuard - not in function - 10-piece upper tool 28° R1 consisting of: 1x 170 / 1x 150 / 4x 100 / 1x 54 / 1x 50 / 1x 45 / 1x 40 mm length - 16-piece bottom tool 30° - V 6 mm, R0.6 mm consisting of: 1x 500 / 1x 300 / 1x200 / 6x 100 / 1x 50 / 1x 45 / 1x 40 / 1x 35 / 1x 30 / 2x 25 mm length - 14-piece bottom tool 84° - V 5 mm, R0.6 mm consisting of: 1x 500 / 4x 100 / 2x 50 / 1x 45 / 1x 40 / 1x 35 / 1x 30 / 3x 25 mm length - 3-part bottom tool 90° - V 8 mm, consisting of: 1x 130 / 1x 95 / 1x 80 mm length - 23820 operating hours read on the operating hours counter in the cabinet Weight 9050 kg space requirement L x W x H 2700 x 2300 x 2890 mm very good condition

Condition: used, Year of construction: 2000, Press capacity approx.: 85 ton Bending length approx.: 2050 mm Stroke: 215 mm Distance between the columns: 1750 mm Joynsfevyv Control: DELEM Dimensions L x W x H: 2650x2300x2900 mm Weight of machine approx.: 9050 kg Standard configuration - 4-axis backgauge

Condition: excellent (used), Year of construction: 2000, In good technical condition and fully functional. Year of construction 2000. Pressing force 850 kN Cyjnlyfi2w Stroke (max.) 215 mm. Operating pressure (max.) 340 bar. Press weight 7900 kg.

Condition: used, Year of construction: 1999, pressure 50 t chamfer lenght 1275 mm distance between columns 385 mm Control Trumpf stroke 215 mm distance between columns 1040 mm weight of the machine ca. 4,75 t dimensions of the machine ca. 2,0 x 2,0 x 2,4 m Trumpf CNC control (Delem DA) Bending beam Y1/Y2 axis Back gauge X/R/Z1/Z2 axis Pneumatic die displacement hydraulic tool clamping punch/die Two-hand/foot control Tools see the list Operating hours 69244 h Cv3b0cevgk

total height: 3,400 cm, installation height: 535 mm, pressing force: 320 t, total length: 4,700 cm, overall weight: 24,000 kg, distance between stands: 3,680 mm, table width: 4,080 mm, Condition: good (used), Year of construction: 1999, Operating hours: 20,362 h, Standard equipment: - Stable machine frame as a welded construction in all-steel construction - Pressure bar with high flexural strength - Electrohydraulic top drive via proportional valves - Modern block hydraulics - CNC rear stop with rack and pinion drive, for X and R axis, risk-free shifting of the stop fingers from the front - "Modufix" upper tool holder system, manual - Lower tool holder for EV dies, manual clamping, programmable displacement - Security device + BendGuard + CNC Crowning + 2pcs. Support brackets + Hydraulic upper tool holder + Bottom tool holder for single V dies with hydraulic clamping + 2pcs. Additional foldable stop fingers + Vorbereitung für ACB Dayghcnu7

Condition: good (used), Year of construction: 1999, Nominal forming force:130 t Table length:3000 mm The machine is in a good technical condition, by prior agreement the possibility of testing. 6-axle machine, 32.257 engine hours Dm2nkf

Condition: used, Year of construction: 2000, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 120 mm Bf82ilydd28 table height 1050 mm tiltable up to +/- 10 mm compressed air 5,0 - 7,0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23,0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library * USB keyboard and mouse interface * including external screen + keyboard - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I / V axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled table crowning (V axis) - CNC controlled, pneumatic matrix displacement (I axis) - TRUMPF hydraulic upper tool clamping - TRUMPF hydraulic lower tool clamping - a lot of insert/bending tools (stamps + matrices) - 1x tool rack - "homemade" - 1x freely movable 2 hand / foot control - 1x freely movable foot switch - Rear safety device (sliding door) - Safety device on the side (pivoting door) - original operating instructions + spare parts list (ENG) * Machine link: ?machineno=1008-9308348

Condition: good (used), Year of construction: 2006, Pressbrake TRUMPF - Trumabend V3200 MACH-ID 7761 Make: TRUMPF Type: Trumabend V3200 Control: TASC 6000 Year: 2006 4 Hydraulic cilinders 2 + 2 Left and Right Lazer safe safety system Hydraulic clamping Electro hydraulic down stroking Backgauge 4-axes system Chy9k8pgpu Rack and pinion drive for X and R Axes Bending help T1 and T2 on front machine Availebel after summer 2023 Specifications Metric US Standard Max. bending length 4420 mm Distance between column 3680 mm Max. pressing force 320 T Dis. Beam - Table 735 mm Beam stroke 445 mm Table Width 200 mm Troth beam 420 mm Approch speed 220 mm/min. Working speed 10 mm/min. Return speed 220 mm/min. Adjustment X-Axis back gauge 860 mm Number of controlled axis X, R, T1, T2 Crowning Yes Hydraulic toolclamping Wila New standard Power 30 kW Dimensions (Estimate) Length 5300 mm Width 1950 mm Height 3200 mm Weight 22800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1998, TrumaBend V85 (1998) Ilbdpw7uen Here are some general features and specifications you might expect to find in a Trumpf TrumaBend V85 press brake: Bending Capacity: The bending capacity of a press brake is usually specified in terms of its maximum bending length and tonnage. The TrumaBend V85 series likely had various options, but a typical model might have a bending length of around 2500 mm (98 inches) and a tonnage capacity of 85 tons. Control System: Trumpf press brakes typically come equipped with advanced CNC (Computer Numerical Control) systems for precise and efficient operation. These systems allow for the programming of bending sequences and parameters. Backgauge: The machine may have a motorized backgauge system that can be positioned accurately to ensure consistent and repeatable bending operations. Tooling: Press brakes use a variety of tooling, including punches and dies, to shape the metal. The TrumaBend V85 would have been compatible with Trumpf's tooling system. Safety Features: Safety features such as light curtains, emergency stop buttons, and safety interlocks are standard on modern press brakes to protect operators. Hydraulic System: The press brake would likely have a hydraulic system to apply the bending force. Hydraulic systems offer precision and control in bending operations.

Condition: ready for operation (used), Year of construction: 1999, Max. pressing force: 850kN, working width: 2550mm, max. stroke: 365mm, max. operational pressure: 340bar, connected load: 14kVA, weight: 9.95t, operational hours counter: 49,651h, an inspection is possible. Cxlmbnec9

total height: 3,100 cm, installation height: 535 mm, pressing force: 200 t, total width: 1,980 cm, total length: 4,620 cm, overall weight: 18,710 kg, distance between stands: 3,680 mm, table width: 4,080 mm, Condition: good (used), Year of construction: 2001, Operating hours: 57,901 h, Standard equipment: - Stable machine frame as a welded construction in all-steel construction Dastna8tb - Pressure bar with high flexural strength - Electrohydraulic top drive via proportional valves - Modern block hydraulics - CNC rear stop with rack and pinion drive, for X and R axis, risk-free shifting of the stop fingers from the front - "Modufix" upper tool holder system, manual - Lower tool holder for EV dies, manual clamping, programmable displacement - Security device + BendGuard + CNC Crowning + 2pcs. Support brackets + Hydraulic upper tool holder + Bottom tool holder for single V dies with hydraulic clamping + 2pcs. Additional foldable stop fingers + Vorbereitung für ACB

Condition: used, Year of construction: 1996, pressure 85 t chamfer lenght 2000 mm distance between columns 1750 mm Control TRUMPF Delem DA 65T total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m T R U M P F (Germany) CNC - Controlled Hydraulic Press Brake Model TRUMABEND V 85, year 1996 Serial No. 88 31 52 _____ Pressure, max. 85 to Working width, max. 2.050 mm Working width between columns 1,750 mm Side daylight of each column 410 mm Max. distance between upper and lower tool holder w/o tools 350 mm Adjustment of upper tool holder approx. 300 mm Table width approx 105 mm Height of Table from floor approx. 1.050 mm Max. stroke 215 mm Stroke, bending speed 1 - 10 mm/sec Stroke, rapid traverse 200/135 mm/sec Adjustment range of back gauge, approx. 800 x 300 (vertical) mm Total electrical load, approx. 10 kW - 400 V - 50 Hz Weight, approx. 7,5 to Accessories / Special Features: * The stroke movement of the upper toolslide is driven by two hydraulic pistons and proportional valves and controlled by two electronic Bno9tlktad measurement scales. Therefore it can be achieved a tilting line of the upper tool of approx. 10 mm * TRUMPF – CNC Control model DELEM Type DA 65 T with 6 controllable Axis like: Y1, Y2, X, R, Z1 a. Z 2, with direct programming of bending cycles on the pendant control and screen with grafics. * CNC-Controlled Cambering by separate control unit inside the table. * Hydraulic driven fast clamping of upper and lower tools * On backside of machine mounted a gauge stop slide controlled in 2 axis ( =R a.X-Axis) in vertical stroke and forward and backwards, three sheet metal stopfingers. * Two-handed release on mobile control stand, and/or foot switch. * Pressure Manometer for the Hydraulic System and oil filter * In front of machine there are 2 lengthwise adjustable sheet metal supports. * Various Bending tools smaller size, * Swivable Safety covers on side and backside doors with plexi-glass shields, etc. Condition : Good to very good – stable design. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2005, Hydraulic press brake Fab. Trumpf - EHT Type. TrumaBend S 85-25 Year 2005 Technical data Make: EHT Type: TrumaBend S 85-25 Year of manufacture: 2005 pressing force: 85 t Bending length: 2550 mm Free column passage: 2150 mm Djmpj2 Stand projection: 405 mm stroke: 250 mm distance table-ram: min.320 / max. 570 mm Speeds: Idle speed 150 mm/s pressing speed 10 mm/s retraction 180 mm/s Power main drive: 11 kW Connected power: 16,5 kW Operating voltage: 3 x 400 V / 50Hz compressed air supply: 4,5 - 6 bar Oil filling: 250 liters space requirement: approx. L 4,73 x W 3,59 x H 2,75 m Machine weight: approx. 8.2 t Equipment - Controlled axes: Y1, Y2, X, R, Z1, Z2 - stop range X-axis 5-1000 mm - Adjustment range R-axis 90-240 mm - 2 movable support arms - CNC crowning in the table - Automatic tool clamping on top - die shifting - Control: CYBELEC DNC 1200 2D - upper die 28°/R1, built in, segmented, with closing function - lower tool, multi V-die, width 55mm, built in, segmented, with Zudruck groove All data without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2001, Make: TRUMPF Type: V-320 Trumabend Control: Delem Year: 2001 Specifications Metric US Standard Max. bending length 4080 mm Distance between column 3680 mm Max. pressing force 320 T Dis. Beam - Table 535 mm Beam stroke 365 mm Table Width 200 mm Troth beam 410 mm Approch speed 250 mm/min. Working speed 10 mm/min. Return speed 125 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis 5 Dimensions (Estimate) Length 4650 mm Width 2310 mm 99omox3cgu Height 3095 mm Weight 24500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2000, Operating hours: 10,122 h, Functionality: fully functional, TECHNICAL DETAILS pressure: 130 t bending length: 3060 mm throat: 410 mm Stroke: 365 mm installation height: 385 mm passage: 2260 mm Control: Delem 8sekh0iluu Machine weight approx.: 12950 kg Switch-on time: 23786 h Operating hours: 10122 h

Condition: used, Year of construction: 2005, Operating hours: 0 h, Used machine in good condition. Available for immediate delivery. - Operating hours: 5.252 - Pressure force: 50 t - Bending length: 1.275 mm - Axes: 5 - Axes: D2llu9v - Distance between uprights: 1.750 mm - Working speed: 1-10 mm/seg - Throat: 410 mm - Stroke max: 215 mm - Power: installed max: 7,5 kW - Dimensions (long x wide x high): 1.930 x 2.030 x 2.375 mm - Weight: 4.750 kg

Condition: good (used), Year of construction: 2003, Standard equipment: - Stable machine frame as a welded construction in all-steel construction - Pressure bar with high flexural strength - Electrohydraulic top drive via proportional valves - Modern block hydraulics - CNC backgauge with rack and pinion drive, for X and R-axis, risk-free shifting of the stop fingers from the front - "Modufix" upper tool holder system, manual - Lower tool holder for EV dies, manual clamping, Shift programmable + 5-axis backgauge system Bd820ye8el3 + Increase in installation height (+230mm) + Crowning CNC + Hydraulic and hardened upper tool clamping + Hydraulic lower tool clamping + 2pcs. ACB connections + 1pc. Support console, front

Condition: good (used), Year of construction: 2004, Standard equipment: - Stable machine frame as a welded construction in all-steel construction - Pressure bar with high flexural strength - Electrohydraulic top drive via proportional valves Hrlv08yaqn - Modern block hydraulics - CNC rear stop with rack and pinion drive, for X and R axis, risk-free shifting of the stop fingers from the front - "New Standard Clamping II" upper tool holder system, manual - Lower tool holder for EV dies, hydraulic clamping, programmable displacement - Safety device consisting of side protective doors and roll-up protective cover at the rear - Control cabinet air conditioning - Network ready - Manual crowning, centrally adjustable + 5-axis backgauge system - Die space/stroke extension +230 mm + Hydraulic and hardened upper tool clamping + Crowning CNC + BendGuard + 2pcs. Support brackets

Condition: good (used), Year of construction: 1999, Standard equipment: - Stable machine frame as a welded construction in all-steel construction - Pressure bar with high flexural strength - Electrohydraulic top drive via proportional valves Isr2z3a - Modern block hydraulics - CNC rear stop with rack and pinion drive, for X and R axis, risk-free shifting of the stop fingers from the front - "Modufix" upper tool holder system, manual - Lower tool holder for EV dies, manual clamping, programmable displacement - Security device + BendGuard + CNC Crowning + 2pcs. Support brackets + Hydraulic upper tool holder + Bottom tool holder for single V dies with hydraulic clamping + 2pcs. Additional foldable stop fingers + Vorbereitung für ACB

Condition: good (used), Year of construction: 2004, Trumpf TrumaBend V130 Bdjbkfsz9xt Year 2004 4 axis operation hours: 67000h maintenance by trump

Condition: good (used), Year of construction: 2001, Operating hours: 68,470 h, machine/vehicle number: 882205, Functionality: fully functional, Both cylinders have been reground, honed and new gaskets have been installed. TECHNICAL DETAILS pressing force: 850 kN material thickness: steel max. 5 mm stroke: 215 mm operating pressure: 340 bar overrun time: 55 ms Safety distance: 88 mm folding length: 2050 mm free column passage: 1750 mm throat: 410 mm width of working table: 120 mm installation height: 385 mm rapid speed Y-axis: 200 mm/s working speed: 1-10 mm/s retraction speed: 135 mm/s Y-axis: CNC controlled MACHINE DETAILS Bgsd2ul8 Voltage: 3x400 V Rated current: 25,5 A frequency: 50 Hz Connected load: 10,2 KVA Compressed air: 6 bar Machine weight: 7900 kg Machine width: 1950 mm Machine length: 2680 mm Machine height: 2375 mm Oil quantity: 200 l EQUIPMENT - Y-axis CNC - Delem control - 2 manual controls - die shifting - crowning - light barrier - Z1-Z2 axis - X-R axis - 2 support arms - hydraulic tool clamping top and bottom

Condition: used, Year of construction: 2000, Tool holder underneath for punching laser machine TC 600L used. Lr3rmbba2

Condition: ready for operation (used), Year of construction: 2001, - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 115 mm Cjzycmke WORKING AREA: 3000 x 1500 mm SOURCE: TLF 3000 TURBO ; 3000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 11500 Kg OVERALL DIMENSIONS: 9800 x 5300 x 2000 mm NOTE: WITH LIBELLULA SOFTWARE

Condition: excellent (used), Year of construction: 2006, TRUMPF TruLaser 3030 Laser power 4000W Bzwq37jt 160 x 310 cm cutting area LiftMaster - Automatic Plate Lift and Feed Plate magazine 2 cutting heads 5 and 7.5'' Elevator for transporting waste in chip containers. Laser works 100%, very good condition Disassembled and ready for shipping Full documentation

Condition: used, Year of construction: 2017, Working hours laser on: 26212 (09/2023) h Working hours beam on: 18905 (09/2023) h Laser power: 3000 Watt Working range laser: 3000 x 1500 x 115 mm Max. steel: 20 mm Max. stainless steel: 15 mm Max. aluminium: 6 mm Max. copper: 6 mm Max. brass: 6 mm Length: 9350 mm Width: 4600 mm Height: 2200 mm Machine weight: 12000 kg Be8mjcukxya Standard configuration Extended machine accessories - nozzle changer Automation - LiftMaster Compact

Condition: ready for operation (used), Year of construction: 2008, Operating hours: 59,616 h, Control Unit Brand Trumpf Siemens Model Sinumerik Main Drive Laser power 3,2 kW Table Outer length 2000 mm Outer width 6000 mm This Trumpf Trulaser 3060 Laser Cutting machine was manufactured in the year 2008 and has 59616 production hours, of which 43520 are laser hours. It is equipped with a Trumpf Siemens Sinumerik control unit. The machine has a laser power of 3,2 kW. Gql0e3d2l Application Types Laser Cutting

Condition: ready for operation (used), Year of construction: 2001, Trumpf TC 6000-1300 Year 2001 3,2 KW Resonator Laser on: 79000 Hours Cfalley9ai Beam on: 26000 Hours

Condition: defective spare-parts repository (used), Year of construction: 2000, Sell spare parts for a Trumpf TC 600L ram control new / used Nvzzz die acceptance punch holder drive motors this is only a small extract of what I have. Please just ask what you need.

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand TASC Model TERMINAL Main Drive Laser power 5,0 kW Ywtas8iu8 This TRUMPF L5030 Classic + Pallet Master Laser cutting machine was manufactured in the year in Switzlerland. It is equipped with a TAST TERMINAL control unit. The machine has a laser power of 5,0 kW. Application Types Laser Cutting

Condition: ready for operation (used), Year of construction: 2004, Operating hours: 6,900 h, Main Drive Laser power 5 kw Laser type CO2 Additional Equipment Incl rotary chuck for tubes This Trumpf Trumatic L3050 Laser Cutting machine was manufactured in the year 2004 in Switzerland and has 6900 hours. The machine has a laser power of 5 kW and includes a rotary chuck for tubes. Saqguwjwg Application Types Laser Cutting

Condition: ready for operation (used), Year of construction: 2010, Operating hours: 12,194 h, General Data Measurements width 16000 mm Measurements depth 8200 mm Measurements height 2800 mm Machine weight 17000 kg Control Unit Brand Siemens Model Sinumerik 840D Main Drive Laser power 3,6 kW Movement X-Axis Movement 6500 mm Bdxfagu9pbs Z-Axis Movement 200 mm Max Material Thickness Steel 8 mm Additional Equipment loading & unloading automatic system included This Trumpf TruLaser Tube 7000 Laser cutting machine was manufactured in the year 2010 in Germany and has 12194 production hours. It is equipped with a Siemens Sinumerik 840D control unit. The machine has a laser power of 3,6 kW. Application Types Laser Cutting

Condition: ready for operation (used), Year of construction: 2005, Operating hours: 30,117 h, Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Laser power 4,0 kW This Trumpf Trumatic L 3030 Laser cutting machine was manufactured in the year 2005 in Switzerland and has 30117 production hours. It is equipped with a SIEMENS SINUMERIK 840D control unit. The machine has a laser power of 4,0 kW. Zcidxunw Application Types Laser Cutting

Condition: ready for operation (used), Year of construction: 2011, Main Drive Laser power 5,0 kW Laser type CO2 Table Outer length 3000 mm Outer width 1500 mm This Trumpf TruLaser 3030 + Liftmaster Laser cutting machine was manufactured in the year 2011. The machine has a laser power of 5,0 kW. Application Types B0gz270wly Laser Cutting

Condition: ready for operation (used), Year of construction: 1991, Control Unit Brand BOSCH Model TRUMAGRAPH CC300 Main Drive Ciz7tgyqdm Punching force 250 kN This Trumpf Trumatic 260 Punching machine was manufactured in the year 1991. It is equipped with a BOSCH TRUMAGRAPH CC300 control unit. The machine has a punching force of 250 kN. Application Types Punching

Condition: ready for operation (used), Year of construction: 2008, Operating hours: 15,040 h, Control Unit Brand Trumpf Main Drive N9nnzk7e Laser power 5,0 kW Table Outer length 3000 mm Outer width 1500 mm This Trumpf TruLaser 5030 classic Laser cutting machine was manufactured in the year 2008 in Switzerland and has 15040 cutting hours. It is equipped with a Trumpf control unit. The machine has a laser power of 5,0 kW Application Types Laser Cutting

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 4500 mm Measurements depth 2500 mm Measurements height 2700 mm Main Drive Laser power 7 kW/9KVA P7ooe8ukg This Trumpf HL124P laser welding machine was made in the year 1997. The machine has a laser power of 7 kW/9KVA. Application Types Welding

Condition: ready for operation (used), Year of construction: 2006, Operating hours: 74,000 h, Control Unit Brand Trumpf Main Drive Laser power 6,0 kW Table Outer length 3000 mm Outer width 1500 mm Hiinyrna7 This Trumpf Trumatic L3050 Laser cutting machine was manufactured in the year 2006 in Germany and has 74000 production hours, of which 38000 are beam on hours. It is equipped with a Trumpf control unit. The machine has a laser power of 6,0 kW. Application Types Laser Cutting

Condition: ready for operation (used), Year of construction: 2011, Operating hours: 65,305 h, Control Unit Brand TRUMPF Xsnqqln Main Drive Laser power 6 kW Laser type CO2 Table Outer length 4000 Outer width 2000 This Trumpf TruLaser 3040 6kW CO2 + Liftmaster Laser cutting machine was manufactured in the year 2011 in Germany and has 65305 production hours. It is equipped with a Trumpf control unit. The machine has a laser power of 6,0 kW. Application Types Laser Cutting

Condition: ready for operation (used), Year of construction: 2005, Control Unit Edde9rmnv Brand SIEMENS Model SINUMERIK 840 D Main Drive Punching force 220 kN Table Outer length 2535 mm Outer width 1280 mm Tools Slots in storage 21 This Trumpf Trumatic TC 5000 R Punching machine was manufactured in the year 2005 in Germany. It is equipped with a SIEMENS SINUMERIK 840 D control unit. The machine has a punching force of 220 kN. Application Types Punching

Condition: ready for operation (used), Year of construction: 2000, Operating hours: 36,200 h, General Data Machine weight 11050 kg Control Unit Brand Bosch Main Drive Punching force 220 kN Table Outer length 5050 mm Outer width 1250 mm Max Material Thickness Steel 8 mm Media Power consumption 19 kVa General Data Machine weight 11050 kg Control Unit Brand Bosch Iy9o3zphb Main Drive Punching force 220 kN Table Outer length 5050 mm Outer width 1250 mm Max Material Thickness Steel 8 mm Media Power consumption 19 kVa This Trumpf Trumatic 500R Punching machine was manufactured in the year 2000 in Germany and has 36200 production hours. It is equipped with a Bosh control unit. The machine has a punching force of 220 kN. Application Types Punching