Auction

4

Ends in

 d  Hrs  Min  Sec Auction ended

Fish bone remover

Baader TRIO FTC Tabletop Pin Bone Remover

€9,000

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, The FTC bone remover is designed to remove bones from fish fillets. If the fillet does not lie perfectly on the belt, the FTC Bone Guide compensates for this and ensures a perfectly smooth result. Ctix98io Machine was serviced a month ago with spare parts (service costs were over €3,000). HIGHLIGHTS Gentle treatment of the fillets No gap formation Keeps the fillets clean Has a vacuum system Easy to clean Easy to move Easy maintenance TECHNICAL DETAILS Product requirement: Fish - fresh, defrosted or smoked Belt speed: max. 4.2 m/min Working length: up to 900 mm Type of fish: e.g. salmon, trout Electrical connection: 208/240 V; 50/60 Hz Water connection: 3 bar, 2 l/min Control cabin dimensions: 1250 x 700 x 1600 mm

more

Auction

10

Ends in

 d  Hrs  Min  Sec Auction ended

Milling machine - as good as new

Millstar VH 450

€19,000

Condition: new, Year of construction: 2021, machine/vehicle number: GM16080202201, Functionality: fully functional, HIGHLIGHTS Very stable machine construction made of gray cast iron with hardened flat guides in the X Y Z axes Conventional control with digital display Linear measuring systems in the X Y Z axes Stepless feed of the axes X Y Z 2-stage gearbox for the main spindle drive - infinitely variable Vertical and horizontal work spindle - BT 50 - manual tool clamping TECHNICAL DETAILS X-axis: 1,100 mm Y-axis: 720 mm Z-axis: 780 mm Speed: 1,600 rpm Cone spindle: BT 50 Milling table clamping surface: 1,500 x 450 mm Workpiece weight: 1,000 kg Number of T-slots: 5 T-slots: 18 mm Feed rate: 25 - 1,500 mm/min Rapid traverse: max. 6,000 mm/min Gkgmb0oed MACHINE DETAILS Motor power: 7.5 kW Machine weight: 4,200 kg Space requirement: 3.5 x 3.1 x 2.75 mm EQUIPMENT Control panel Electronic handwheel for the X Y Z axes Central lubrication system - bed track lubrication - automatic Coolant device Chip guard and splash guard mounted on the milling table CE marking Documentation in English

more

Auction

3

Ends in

 d  Hrs  Min  Sec Auction ended

Lathe

Benzinger TNI B8

€15,000

Condition: repair required (used), Year of construction: 2000, Functionality: not functional, Error: Machine starts up, but the axis module of the Y-axis reports an error Special feature: the main spindle is a special spindle (71916 with short taper 5 holder and a special cylinder 4371 made by Röhm) TECHNICAL DETAILS Control: 2-channel Siemens 840 D, Turret 1: X1-, Z1- and Y1-axis Counter spindle: X2-, Z2- and Y1-axis Tool positions turret: 1x 12-fold pneumatic Tool positions counter spindle: 1x 12-fold pneumatic Holder: VDI25 with single-position drive Lvm7msblir Additional counter spindle tool positions: Spindle turret around the counter spindle with 7 VDI 16 positions Main spindle belt drive: Pneumatic hollow clamping cylinder D42 Counter spindle belt drive: pneumatic hollow clamping cylinder Unloading device: with unloading belt Coolant system: with heat exchanger Chip collection container: available

more

Auction

7

Ends in

 d  Hrs  Min  Sec Auction ended

C-Y-axis lathe

DMG MORI CTX alpha 500

€60,000

Condition: excellent (used), Year of construction: 2008, Operating hours: 355 h, machine/vehicle number: 0045000018C, Functionality: fully functional, No minimum price - the highest bid is guaranteed to win! The machine is in a vocational school and has hardly been used - very few spindle hours! TECHNICAL DETAILS Turning length: 500 mm Y-axis stroke: ±40 mm (for cross slide) Speed: 6000 rpm C-axis: available Disk turret: Sauter 12-fold VDI 30 (driven) CNC control: Siemens 840D solutionline with ERGOline Programs: DMG MACHINEcheck, DMG AUTOshutdown and ShopTurn Drive power (100/40 % ED): 20/27 kW Drawtube inner diameter: 52 mm MACHINE DETAILS Connected load: 25 kVA Operating voltage: 400 V EQUIPMENT Tailstock Spindle brake Chip conveyor with coolant device Coolant spray gun Three-jaw power chuck with BBD 210/66 bore (made by SMW-Autoblock) Biizviz2wna Bar gripper, axial, complete, VDI 30 Workpiece pick-up device with automatic gripper arm, conveyor belt, protective flap

more

Auction

12

Ends in

 d  Hrs  Min  Sec Auction ended

Injection molding machine

FERROMATIK MILACRON Magna T Servo 275

€40,000

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: DS901DA010011, Functionality: fully functional, On offer here is a system for the production of injection molded parts including various automation (articulated arm robot) for the further assembly of threaded bushes and screws. HIGHLIGHTS Ejector Position-dependent ramps for accurate changeover and precise speed and pressure control Biivfdncr3u Highly sensitive mold locking with repeat cycles Injection stages, time or path switchable Aluminum checker plate under screw cylinder nozzle Automatic temperature reduction after reaching a certain number of cycles Energy-saving servo motor with quiet gear pump TECHNICAL DETAILS Clamping force: more than 110 t (robust double toggle lever) Injection unit: mounted on linear guides from injection unit 450 and larger Screw diameter: 50 mm Hydraulic core pull: 2-fold Screw diameter: 3 per injection unit to choose from Injection speed: 6 stages Injection pressure: 15 stages Screw speed: 5 stages Holding pressure: 5 levels Control unit: ENDURA touch Programs: Semi-Auto Purge, Cold Slug removal & Intrusion Moulding Programs Mold insertion height adjustment: automatic Positioning: Linear position measuring system Central lubrication: automatic Tool locking: adjustable 2 pressure levels & 1 speed level Feed speed: adjustable in 2 stages Screw retraction: before and after plasticizing Screw speed control: digital setpoint input and actual value display Ejector: Vibratory ejector - strokes adjustable from 1 to 9 Ejector connection thread: M 16 Intermediate ejector stop: possible Dwell time: adjustable in front and rear position Hopper emptying device: available Unit lift: via time function Nozzle contact force: via pressure switch Temperature control: available Oil preheating cycle: available Oil level monitoring: acoustic Oil filter monitoring: acoustic Continuous oil filtration: 10 µm filter MACHINE DETAILS Operating voltage: 400 V AC, 50 Hz Peak current: 62.4 A Weight: 14680 kg Cooling water battery: with 10 control circuits Socket pack: B-3 SCHUKO sockets: 3x 230V 16A CeKon socket: 3x 400V 16A Tool heating control points: 12 pieces; type FMI according to EUROMAP 14; power 15A per control point; separate HAN 16 plugs for power and sensors OTHER Thermoplastic design Alarm display in the event of heating tape or temperature sensor faults Screw start-up safety device Temperature monitoring with tolerance band Display of temperature setpoint and actual values in bar chart Ergonomic distribution of hydraulic components for easy access Hydraulic valves positioned close to the consumer for fast response times Ejector or core pull can be moved parallel to the closing movement via separate pump

more

Auction

15

Ends in

 d  Hrs  Min  Sec Auction ended

Injection molding machine

DEMAG Ergotech 500-3300

€6,500

Condition: good (used), Year of construction: 1996, machine/vehicle number: 862-1023, Functionality: fully functional, TECHNICAL DETAILS Control unit: NC4 Screw diameter: 80 mm Travel 1,200 x 2,000 x 500 mm Stroke volume: 1,779 cm³ Injection weight PS: 1,600 g Injection pressure: 2,426 bar Lvh2k8wwsf Clamping force: 500 t Clamping force: 550 t Opening stroke: 810 mm Handling: Manufacturer DEMAG type DR 440 Robot system: 40921210 Tool installation height: 400 - 880 mm Mold weight: 6700 kg Ejector travel: 230 mm Ejector force: 90 kN Ejector retraction force: 45 kN Clamping plates: 1,300 x 1,200 mm Distance between tie bars: 900 x 800 mm Distance between the plates: 1,690 mm Equipment: 4 core pulls, 4 cascades L/D ratio: 20 mm Injection pressure: 1855 bar Stroke volume: 1779 ccm Injection part weight: 1600 g Metering stroke: 354 mm Nozzle travel: 650 mm Nozzle immersion depth: 45 mm Nozzle contact pressure: 109 kN Barrel heating: 30.6 kW Screw drive: 40 kW Hopper capacity: 110 l MACHINE DETAILS Heating connection: 30 kW Screw drive connection: 40 kW Weight: 30 t Injection unit dimensions: 4,600 x 1,900 x 2,100 mm Clamping unit: 4,700 x 2,200 x 2,500 mm

more

Auction

7

Ends in

 d  Hrs  Min  Sec Auction ended

Universal machining center

TOS KURIM FSQ 100

€52,250

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, TOS KURIM FSQ 100 Universal BAZ with HEIDENHAIN TNC 426 control TECHNICAL DETAILS X-path: 1,600 mm Y-path: 1,000 mm Z-path: 780 mm WORKING RANGE -CUBIC - Number of machining axes (without parallel axes) 5 - X-axis travel: 1,600 mm - Y-axis travel: 1,000 mm - Z-axis travel: 780 mm TABLE - Clamping surface (left-right): 1,000 mm - Clamping surface (front-rear): 1,000 mm - Workpiece weight (max): 6,000 kg - Rotation axis: C > Positionability 0.001 ° MILLING SPINDLE / HEAD - Spindle type: Swivel head > Positionability 2.5 ° - Speed range: up to 2,500 /min - Tool holder: ISO SK 50 - Drive power: 22 kW TOOL MAGAZINE - Number of tool positions 60 WORKPIECE AUTOMATION Dmxiib - Number of storage locations: 2 - Pallet length: 1,000 mm - Pallet width: 1,000 mm - Number of pallets: 2 DIMENSIONS / WEIGHTS - Space requirement (left/right): 6,400 mm - Space requirement (front/rear): 6,900 mm - Total height: 4,000 mm - Total weight approx. 26,000 kg Control HEIDENHAIN TNC 426

more

Auction

5

Ends in

 d  Hrs  Min  Sec Auction ended

Lathe

FAT Haco FTM165

€70,000

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: 170803, Functionality: fully functional, Power - Precision - Performance This machine model is the most compact model from FAT Haco in the field of turning and milling centers. The machine has only been used a little and is therefore in mint condition! Including parts catcher for main and counter spindle and tool. TECHNICAL DETAILS Spindle distance: 1000 mm Turning diameter over bed: 550 mm Turning diameter: 350 Speed: 6000 rpm Control system: Siemens 840 D SL Y-axis: ± 35 mm Longitudinal travel: 210 mm Rapid traverse X/Z: 35 m/min Torque: 275 Nm Gpewoivph Spindle nose according to DIN 55026: A2-6 Spindle taper: 1:20 Counter spindle speed: 6000 rpm Counter spindle rapid traverse: 30 m/min Counter spindle torque: 95 Nm Counter spindle nose: A2-6 Tool holder: VDI 40 Tool positions: 12 Tool holder diameter: 20 mm Index time: 0.2 s Speed: 4000 rpm Quill taper: MT 4 Traversing method: automatic positioning Diameter of quill: 55 mm Tailstock stroke: 15 mm Thrust force: 4,400 N MACHINE DETAILS Dimensions: 1940 x 1860 x 3750 mm Weight: 6600 kg Power: 57 kW

more

Auction

8

Ends in

 d  Hrs  Min  Sec Auction ended

5-axis universal machining center

Deckel Maho DMU 80 P Hi-Dyn

€23,000

Condition: excellent (used), Year of construction: 2001, Operating hours: 30,071 h, machine/vehicle number: 1117 0031653, Functionality: fully functional, Machine checked by expert team for used DMG-Mori machining centers and is in excellent condition, ready for inspection and immediate delivery. Inspection of the machine under power possible. TECHNICAL DETAILS Travel X / Y / Z: 800 / 700 / 600 mm Speed: 18,000 rpm Table diameter: 800 mm Spindle head: Horizontal/vertical ISO 40 Control: Heidenhain TNC-i430 Internal cooling: 40 bar Tool changer: 30 positions Spindle power: 19 kW Bipp30v8jbl Connected load: 56 kVA EQUIPMENT Chip conveyor Heidenhain HR-410 handwheel

more

Auction

16

Ends in

 d  Hrs  Min  Sec Auction ended

5-axis universal machining center

DMG MORI DMU 65 monoBLOCK

€115,000

Condition: good (used), Year of construction: 2014, Operating hours: 57,846 h, machine/vehicle number: 12140011573, Functionality: fully functional, No minimum price - the highest bid is guaranteed to win! Spindle replaced at 45,000 h in June 2022 Machine interface for automation available TECHNICAL DETAILS X axis: 735 mm Y axis: 650 mm Z axis: 560 mm B axis: +120° / -120° C axis: 360 ° Control: Heidenhain ITNC 530 3-D Speed: 10,000 rpm Tool magazine: Vertical chain magazine with 120 pockets Tool holder: HSK-A63 Measuring probe: Heidenhain TS 649 Table load: 1,000 kg Biix2xazljw T-slot table top C-axis: 1 x 14 H7 (alignment slot); 8 x 14 H12 (clamping slots); Drilling pattern: 8 x M12 Spindle power (40% ED): 46 kW Torque (40% ED): 200 Nm MACHINE DETAILS Weight: 12.7 t Operating time: 67408 h Processing time: 57846 h Supply voltage: 400 V / 50 Hz Connected load: 53 kVA EQUIPMENT Chip conveyor (scraper belt) Blum laser tool measurement MPC IKZ 40 BAR Paper belt filter Rotating viewing window Flushing gun with pump Oil mist separator Electric handwheel iTNC 530 ATC - programmable feed rate parameter setting for machining task Active chatter suppression ACC Safety package for power failure Infrared touch probe, Heidenhain TS 649 3D quickSET extension package MPC machine protection through quick shutdown Documentation in German

more

Auction

12

Ends in

 d  Hrs  Min  Sec Auction ended

Vertical machining center

Samsung SMEC LCV 380 S

€19,000

Condition: as good as new (ex-display), Year of construction: 2015, Operating hours: 989 h, machine/vehicle number: 15L390029, Functionality: fully functional, TECHNICAL DETAILS X-path: 520 mm Y-path: 380 mm Z-path: 350 mm Spindle speed: max. 12,000 rpm Dm0hkh Control name: FANUC OI-MF Table load: max. 300 kg Clamping surface: 600 x 570 mm Rapid traverse: 36 / 36 / 30 m/min Feed rate: 1 - 20,000 mm/min Drive power: 7.5 / 5.5 kW Number of tool magazine positions: 20 Tool holder: BT30 Tool change time: 0.85 sec Chip to chip: 2.2 s MACHINE DETAILS Internal cooling: 20 bar Machine weight: 4000 kg Dimensions L x W x H: 2800 x 2500 x 2500 mm Operating hours: 989 h

more

Auction

8

Ends in

 d  Hrs  Min  Sec Auction ended

Band saw machine

Kaltenbach KBR 371NA

€3,000

Condition: good (used), Year of construction: 2002, machine/vehicle number: 122590, Functionality: fully functional, TECHNICAL DETAILS Cutting range 90° round: 400 mm Square: 371 x 371 mm square: 400 x 370 mm Bicxl2pn2oz Saw blade: 5,920 x 34 x 1.1 mm ( 5,920 x 41 x 1.3 mm) Feed: 10 to 760 mm multiple times MACHINE DETAILS Connection: 9.2 kW Weight: 4.2 tons Dimensions: 4,000 x 2,200 x 1,850 mm

more

Auction

8

Ends in

 d  Hrs  Min  Sec Auction ended

Jig

CHARMILLES Roboform 55P QCRi

€4,000

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 1 5239 - 820087 (QCRi), Functionality: fully functional, Short C-frame with fixed table TECHNICAL DETAILS X / Y / Z travel: 600 / 400 / 450 mm C-axis: for rotation, indexing and erosion Workpiece dimensions (L x W x H): max. 1200 x 850 x 400 mm Workpiece weight: max. 1600 kg Distance table to chuck: 150 - 600 mm Electrode weight on C-axis: max. 25 kg Dm8nwr MACHINE DETAILS Net weight: 3800 kg (machine only without QCRi) Weight QCRi: 1130 kg Dimensions (L x W x H): 2900 x 2720 x 2900 mm (machine only without QCRi) EQUIPMENT ISOPULSE generator with 64 amps 12-inch CRT screen with keyboard QCRi pallet and electrode changer (without pallets) Automatically lowerable work bowl Not included: Erowa table chuck

more

Auction

8

Ends in

 d  Hrs  Min  Sec Auction ended

Guidance and lathe

GDW LZ 280 S

€9,000

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1106447, Functionality: fully functional, Little used training machine TECHNICAL DETAILS center height: 165 mm center width: 650 mm turning diameter over bed: 280 mm cross slide: 180 mm spindle speed: 30 - 4500 rpm (infinitely variable) Option: 150 - 5000 rpm (stepless) feeds: 0,025 - 0,9 mm/rev thread pitch: 0,2 - 7 mm spindle head DIN 55027: size 5 Inner taper similar to DIN 228: shortened ME 50 bed slide travel: 610 mm cross slide travel: 165 mm top slide travel: 115 mm inner taper tailstock quill DIN 228: MK3 quill stroke: 82 mm Chuck diameter max: 160 mm Collet diameter DIN 6341-K32: max. 27 mm Face slide diameter: max. 250 mm Standing steady rest Guide diameter: 10 - 80 mm Travelling vice guide diameter: 10 - 60 mm Workpiece weight incl. clamping device: max. 100 kg MACHINE DETAILS dimensions: 1600 x 860 x 1450 mm weight: 1000 kg type of drive: 400V type of current: 3 phases Total power requirement: 18kVA EQUIPMENT three-jaw chuck diameter 160 mm + external and internal jaws Block jaws soft for diameter 160 mm (3 pcs.) Four-jaw chuck diameter 160 mm + external and internal jaws Block jaws soft for diameter 160 mm (4 pcs.) Lever collet quick clamping device LZ280S tie rod DIN 32 K optional for 1.670 € set of collet chucks 3 - 29 mm Quick change tool holder type B Turning toolholder (4 pcs.) Center punch point running Coolant device protection tube - tube lamp Biplmmlb2y3 Change wheels (1 set) Machine shoes (8 pcs.) position indicator Heidenhain 3 axes Splash guard with integrated shelf for turning tool holder

more

Auction

4

Ends in

 d  Hrs  Min  Sec Auction ended

5-axis universal machining center

Deckel Maho DMC 100 U duoBLOCK

€90,000

Condition: excellent (used), Year of construction: 2004, Operating hours: 23,500 h, Functionality: fully functional, 5-axis machining center with pallet changer Machine checked by expert team for used DMG-Mori machining centers and is in excellent condition, ready for inspection and immediate delivery. Inspection of the machine under power possible. TECHNICAL DETAILS Travel X / Y / Z: 1,000 / 1,000 / 1000 mm Spindle 4th axis: -30 / +180º Indexing: 0.001º Spindle speed: 10,000 rpm ( ISO 40) Control: Heidenhain TNC-i530 Bipl0lmfrns Double pallet dimensions: 1,000 x 800 mm Workpiece weight: 2,000 kg Tool magazine: 30 tools Spindle power: 19 kW Internal cooling: 40 bar (paper filter) EQUIPMENT Chip extraction Heidenhain HR-410 electronic handwheel Centering probe Heidenhain TS-642

more

Auction

13

Ends in

 d  Hrs  Min  Sec Auction ended

5-axis horizontal machining center

Deckel Maho DMC 80 H

€145,000

Condition: good (used), Year of construction: 2013, Operating hours: 43,419 h, machine/vehicle number: 1222 0000033, Functionality: fully functional, No minimum price - the highest bid is guaranteed to win! Machine in a more powerful version and with comprehensive accessories Gkrrv7mh2 TECHNICAL DETAILS Travel: 800 x 1,095 x 1,050 mm Rotation B-axis: 360 Swivel range A-axis: 25° / - 200° Speed: 18,000 rpm Control: Siemens 840D solutionline Operate Table load: 600 kg Tool holder: HSK-A63 according to DIN69893 Tool clamping: hydromechanical Tool changer: Double gripper Tool magazine: Wheel magazine, 123 places HSK-A63 Rotary table: NC with pallet carrier Pallet size: 2 x 630 x 630 mm T-slot clamping surface: DIN55201 - A2 T-slots: 14 mm Motor spindle power (40% / 100% ED): 34 / 28 kW Torque (40% / 100% ED): 110 / 84 NM MACHINE DETAILS Switch-on time: 57,876 h Operating hours: 43,419 h EQUIPMENT Horizontal milling head Rotary pallet changer 3D path control Control language: German Clamping hydraulics 2/4 for work table and set-up station Preparation of hydraulic connection 2/4 for additional pallet Cone cleaning station with rotating brushes for HSK tool holder Tool magazine Wheel magazine (2 wheels) Tool breakage control MPC - machine protection through quick shutdown Signal lamp in 4 colors (red, yellow, green, blue) Rotating viewing window Work area door Flushing gun with pump Oil and emulsion mist separator MCIS_TDI tool management system Siemens 840D electronic handwheel Complete documentation, German

more

Auction

31

Ends in

 d  Hrs  Min  Sec Auction ended

Edge banding machine

BIESSE Roxyl 5.5

€20,000

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 92696, Functionality: fully functional, Edge banding machine with panel return system BIESSE Formetal Rittorno Pezzi TRxRP Roxyl 5.5. It is possible to select and control the positioning of the knives and copying devices from the control panel in order to carry out all the processing operations possible with the multifunction knives. High finishing quality thanks to the movement on linear guides with recirculating ball screws, the vertical oscillating copying system, the frontal copying device with pre-copying system. NC axis with fast and reliable changeover TECHNICAL DETAILS Plate height: 10 - 60 mm Workpiece height: 14 - 64 mm Thickness of workpiece in rolls: 0.4 - 3 mm Thickness of workpiece in strips: 0.4 - 22 mm Panel length: min. 140 mm Length: max. 3200 mm Web feed speed: 12-18-20-25 m/min Non-stick liquid: Prevents glue residue from sticking to the panel surfaces Axes: 4 NC axes, driven by brushless motors and ball screws Pre-milling unit: FI-502 Infrared heating: RP10 Gluing, edge feed and pressure unit: VC-710 Pre-melting unit: QM-705 for EVA hot melt adhesive Edge magazine: for rolls of edge banding strips Pressure zone 1: Pressure roller D.150 with inverter drive + 6 free rollers (3 rollers in addition to the 3 standard rollers) Snipping unit: IN-801 2 x 0.65 kW, 12000 rpm Cutting angle: 0 - 15° Upper and lower edge trimming unit: RS-100 2 motors x 1kW, 12000rpm, electronically adjustable Multifunctional trimming unit: RF-400 (replaces RF-100) for upper and lower trimming or fine processing of the edge to be processed, motors 12000 rpm complete with extraction hoods Multifunctional corner rounding unit: AR 30 NC axis The adjustment is fully NC-controlled. The unit performs corner rounding and top and bottom trimming of panels with plastic edges up to a maximum edge thickness of 3 mm. Edge scraper: RBK-503, NC double position, profile radius 1-3 mm, electronically adjustable MACHINE DETAILS Workpiece counter: 316272 m Sheet counter: 526943 pieces Compressed air: 7 bar Gmj2ek EQUIPMENT Pneumatic exclusion included Liquid spraying ADZ

more

Auction

12

Ends in

 d  Hrs  Min  Sec Auction ended

Cylindrical grinding machine

KELLENBERGER KEL-VARIA UR 175/1000

€20,000

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 650542, Functionality: fully functional, The workpiece spindle and tailstock were replaced in 2022 and the machine was completely overhauled by Kellenberger - cost calculation of approx. 50,000 euros is available. TECHNICAL DETAILS Control: Heidenhain Center width: 1,000 mm Table travel: 1,150 mm Center height: 175 mm Rotation diameter: 350 mm Swivel range: -10° to + 100° Speed: 8 to 800 rpm infinitely variable Work weight between centers: 150 kg Table feed: 1 - 394 mm/min Table speed: max. 15 m/min Grinding wheels left: 500 x 80 x 203.2 mm Sanding headstock: fixed base frame, cannot be swiveled Micro-adjustment with correction range: 150 μm Tailstock holder: MK 5 Quill stroke: 50 mm MACHINE DETAILS Weight: approx. 6 tons Dimensions: 4,000 x 2,300 x 2,200 mm Connection: approx. 10 kW Supply voltage: 400 V EQUIPMENT Paper filter Full enclosure Sanding mist extraction S9torh03 Cooling unit

more

Auction

17

Ends in

 d  Hrs  Min  Sec Auction ended

Horizontal machining center

Matsuura MAXIA H.Plus-405

€60,000

Condition: good (used), Year of construction: 2013, Operating hours: 28,005 h, machine/vehicle number: 18926, Functionality: fully functional, TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 660 mm Z-axis travel: 660 mm B-axis: 360º (0.001º) Spindle speed: 40 - 12,000 rpm Number of pallets: 2 Pallet dimensions: 500 x 500 mm Workpiece size (D x H): max. 700 x 850 Workpiece weight: max. 400 kg CNC control: SIEMENS 840Di Feed speeds: 60 m/min Rapid traverse: 60 m/min Tool holder: SK-40 Big+ Number of tools in the magazine: 360 Tool diameter with free adjacent positions: 150 mm Tool diameter with occupied neighboring slots: 80 mm Tool length: max. 350 mm Tool weight: max. 10 kg MACHINE DETAILS Coolant supply through the spindle: 70 bar Tank capacity: 1,400 l Switch-on time: 43450 h Processing time: 28005 h Bfroudcl Rated power: 60 kVA EQUIPMENT Electronic handwheel Chip conveyor Infrared measuring probe (RENISHAW OMP60) Rotating viewing windows Flushing gun Blowing air through the center of the spindle Signal light High pressure pump Tool breakage probe Mist separator Blowing air out of the spindle Direct measuring system XYZ Preparation for external pallet transfer Working coordinate systems (99) Precision NC rotary table, rapid traverse and feed 100 1/min incl. direct measuring system Machine-side interface for FASTEMS system

more

Auction

9

Ends in

 d  Hrs  Min  Sec Auction ended

Guidance and lathe

GDW LZ 360 S V

€9,000

Condition: good (used), Year of construction: 2001, machine/vehicle number: 1104445, Functionality: fully functional, Little used training machine TECHNICAL DETAILS center height: 175 mm center width: 800 mm turning diameter over bed: 310 mm cross slide: 185 mm spindle speed: 30 - 3000 rpm (infinitely variable) feeds: 0,025 - 2,0 mm/rev thread pitch: 0,2 - 14 mm spindle head DIN 55027: size 5 Internal taper similar to DIN 228: shortened ME 50 bed slide travel: 750 mm cross slide travel: 185 mm top slide travel: 115 mm inner taper tailstock quill DIN 228: MK3 quill stroke: 110 mm Chuck diameter normal/maximum: 160 /200 mm Collet diameter DIN 6341-K32: max. 27 mm Face slide diameter: max. 310 mm Standing steady rest Guide diameter: 10 - 100 mm Travelling vice guide diameter: 10 - 85 mm Workpiece weight incl. clamping device: max. 100 kg MACHINE DETAILS dimensions: 1400 x 1000 x 2050 mm weight: 1000 kg type of drive: 400V type of current: 3 phases Total power requirement: 18kVA EQUIPMENT three-jaw chuck diameter 160 mm + external and internal jaws Block jaws soft for diameter 160 mm (3 pcs.) Four-jaw chuck diameter 160 mm + external and internal jaws Block jaws soft for diameter 160 mm (4 pcs.) Dm8nab Lever collet quick clamping device LZ280S tie rod DIN 32 K optional for 1.670 € set of pull collets 3 - 29mm Quick change tool holder type B Turning toolholder (4 pcs.) Center punch point Coolant device protection tube - tube lamp Change wheels (1 set) Machine shoes (8 pcs.) position indicator Heidenhain 3 axes Splash guard with integrated shelf for turning tool holder

more

Auction

10

Ends in

 d  Hrs  Min  Sec Auction ended

Hydraulic guillotine shear

Weinbrenner TSV 20/4100

€9,000

Condition: good (used), Year of construction: 1987, machine/vehicle number: 686T, Functionality: fully functional, Guillotine shears with rear sheet holding device Bcybtlrn TECHNICAL DETAILS Sheet width: 4100 mm Sheet thickness: 20 mm Stand width: 4100 mm MACHINE DETAILS Total power requirement: 45 kW Hydraulic pressure: 240 bar Machine weight: approx. 37900 t Space requirement: approx. 4.9 x 2.6 x 2.8 m

more

Auction

8

Ends in

 d  Hrs  Min  Sec Auction ended

Plate shear

DURMAZLAR TDMC HGM 4006

€8,000

Condition: used, Year of construction: 2005, machine/vehicle number: 522205200, Functionality: fully functional, TECHNICAL DETAILS Sheet width: 4100 mm Sheet thickness: 4 - 6 mm (stainless steel - structural steel) Stand width: 4100 mm Control: CNC Stroke: 165 mm Stroke rate: 10 - 29 1/min Motor power: 11 kW L8axrfuekd MACHINE DETAILS Total power requirement: 5 kW Machine weight: approx. 11.3 t Space requirement: approx. 5.1 x 3.1 x 2 m Oil tank: 140 l Length: 5150 mm Width: 3175 mm Height: 2000 mm

more

Auction

12

Ends in

 d  Hrs  Min  Sec Auction ended

Laser cutting machine

Deckel Maho DML 40 SI

€10,000

Condition: excellent (used), Year of construction: 2003, Operating hours: 1,930 h, machine/vehicle number: 11150001077, Functionality: fully functional, DML 40 SI laser machine with filter unit and laser cooler Comprehensive maintenance last carried out in 2020. Bilqmzwc8ak TECHNICAL DETAILS x-axis: 400mm y-axis: 300mm z-axis: 500mm Load of the table: max. 50kg Laser class: 4 Wavelength: 1064 μm Nominal power: 100 W cw with 4 mm aperture MACHINE DETAILS Nominal power: 27 kVA Laser operating hours: 1046h Machine operating hours: 1930h Machine dimensions: 2.30 x 1.40 x 195 m Filter unit dimensions: 0.66 x 0.36 x 1.38 m Laser cooler dimensions: 0.85 x 0.55 x 1.02 m Weight of machine: 2560 kg Weight filter unit: 82 kg Weight laser cooler: 185 kg EQUIPMENT Laser cooling with Termochiller P607 Filter unit type MKF LC1(year 2003) Lasersoft 3D software

more

Auction

11

Ends in

 d  Hrs  Min  Sec Auction ended

Vertical machining center

C.B.Ferrari ML45

€40,000

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, 5-axis vertical machining center in very well maintained condition TECHNICAL DETAILS travel X / Y / Z: 420 / 320 / 320 mm A-axis: 200° (+- 100°) C-axis: 360° rotational speed: 30.000 rpm spindle motor: 30 kW Control: Heidenhain TNC 530 spindle mounting: ISO V30 distance spindle nose to table: 40 - 360 mm rapid traverse: 60 m/min pallet dimension: 250 mm workpiece dimensions: 150 x 150 x 150 mm workpiece weight: 20 kg tool places: 60 pieces tool diameter: 80 mm tool length: 140 mm MACHINE DETAILS weight: 5500 kg dimensions: 2555 x 2050 x 2500 mm EQUIPMENT Tank with pump U920f0go Suction device FX 5000 Tool no. 2

more

Auction

10

Ends in

 d  Hrs  Min  Sec Auction ended

Form fill and seal machine

Alpha-Pack Europe SRL DEAHP-450-3S

€7,500

Condition: good (used), Year of construction: 2021, machine/vehicle number: 210234, Functionality: fully functional, HIGHLIGHTS Steel frame/stainless steel construction Products are transported by gripper loading Teflon-coated, permanently heated sealing stamps Simple touchscreen operation Continuous feeding of products via photocell control Safety protection cover 3-sided welded seam packaging (fin seam) TECHNICAL DETAILS Thermal transfer printer: Domino V120i, print mark sensor for printed film Content check: "no product - no bag" photocell (no empty bags) Film diameter: 300 mm Maximum film size: 450 mm (roll width) Maximum product length: 600 mm (L) Film type: PP, POF and laminated films Speed: up to 90 pieces/min Sealing mechanics: Longitudinal / rotation / 3 servo motors Roll size width x diameter: max. 450 x 300 mm MACHINE DETAILS Machine weight: approx. 720 kg Compressed air connection: 6 bar dry air Connected load: max. 3.0 kW Power supply: 400 V / 3 phases Raz99inv3

more

Auction

4

Ends in

 d  Hrs  Min  Sec Auction ended

Tube bending machines

Hirschmiller und Höhn NCB 4000

€10,000

Condition: used, Year of construction: 1997, Functionality: fully functional, Contrary to the provision described above, the machine is provided EXW free loaded DESCRIPTION Fully automatic, numerically controlled machine For bending hydraulic lines and car brake lines of various lengths. Variable number of bends possible 2 different, independent bending modules. Each module has 2 NC axes with program memory for Program memory for 250 lines the loading unit consists of a manually fillable drum magazine Loading takes place by means of an insertion swivel arm TECHNICAL DETAILS Tube diameter: 4.75 - 8.0 mm Bending angle: max. 180 ° Travel speed: max. 2.0 m/s Max. Max. number of bends: 100 per tube Dm3v9n Functions: "Longitudinal bending" (axis 1 + axis 3), "Turning the bending head" and "Bending" (axis 2 + axis 4) Control unit: Bundy GHF 60134 Drum magazine capacity: 500 - 1000 pieces MACHINE DETAILS Compressed air: min. 4.5 bar Total power requirement: approx. 10 kW Machine weight: 6.0 t Machine dimensions: 6.3 x 3.7 x 2.0 m Control cabinet dimensions: 1.8 x 0.5 x 2.7 m Control panel dimensions: 0.85 x 0.68 x 1.65 m EQUIPMENT Various individual and add-on parts

more

Auction

6

Ends in

 d  Hrs  Min  Sec Auction ended

Cutting Mill

Nuga Stadler CentriCut 44sr

€27,000

Condition: excellent (used), Year of construction: 2012, Functionality: limited functionality, The plastic granulator is intended for industrial use. Application: Size reduction of all types of plastics, e.g. ABS, POM, PA6, PE, PP, PG and PET. The system consists of a granulator with belts and a bottle hopper. Material is fed into the bunker via a feed belt. A conveyor belt with an all-metal detector transports the material from the bunker to an infeed screw conveyor. This transports the tested material into the granulator. The granulator is located in a soundproof cabin. Contrary to the provision described above, the machine is provided EXW free loaded TECHNICAL DETAILS Dm3v0x TASK TAPE Manufacturer: Stadler Designed for PET Tonnage: 3.0 t/h Volume flow: 60 cbm/h Speed: 0.8 m/s Center distance: 11.2 m Bend angle: 30° Belt width: 1,000 mm Dump height: 34 mm BUNKER Model: 20M2 V2A Gear motor: 7.5 kW Control: centrally via granulator Volume: approx. 20 cbm (m3) Dimensions (H x W x D): 4,400 x 3,300 x 3,300 mm Weight: approx. 27.0 t including discharge unit with central discharge onto a conveyor belt CONVEYOR BELT Model: NT9 Belt length: 3,500 mm Belt groove width: 416 mm Guide profile height: 60 mm Carrying bar height: 500 mm Overall dimensions (L x W x H): 3,550 x 780 x 2,350 mm Weight: 250 kg Detector mountable TUNNEL DETECTOR Model: S + S Primus 600 Sensitivity: 5 cFe (adjustable) Warning: Flashing warning light Control: integrated in the granulator on the control side Scanning side: 600 mm Passage width: 840 mm Passage height: 400 mm Weight: approx. 150 kg Gear motor: 7.5 kW CUTTING MILL Model: CentriCut 44 SR 55 kW Electrical data: 55 kW (50 Hz, 400 V) Infeed auger: 55 kW (50 Hz, 400 V) Rotor diameter: 440 mm Rotor blade length: 272 mm Number of knife holders: 5 Dimensions (L x W x H): 1,850 x 1,070 x 1,705 mm (closed and without switch cabinet) Weight: 2.0 t SOUND PROTECTION Manufacturer: GROSS Details: walk-in, 2 doors, removable side walls, air circulation Dimensions (L x W x H): 2,700 x 2,300 x 2,500 mm Weight: 1.3 t Unit is for sale ready for transportation.

more

Auction

6

Ends in

 d  Hrs  Min  Sec Auction ended

5-axis machining center

Reichenbacher Hamuel ECO-NT 3610-1K

€40,000

Condition: used, Year of construction: 2008, Functionality: fully functional, Contrary to the provision described above, the machine is provided EXW free loaded DESCRIPTION Designed as a router and enables fully automatic routing, re-milling and profile milling Machine table, portal and carriage are designed as self-supporting welded constructions. The machine table is loaded from the front of the machine. The table layout can/is arranged with two variable work stations. HF spindle water cooling with cooling unit Automatic clamping system with mechanical tool clamping Bikg029e8cc TECHNICAL DETAILS X-path: 4140 mm Y-path: 1540 mm Z-path: 1000 mm B-axis: ± 135° C-axis: ± 360 Control: Siemens 840D Solution Line Spindle speed: 3200 - 59500 rpm Rated power: Spindle: 4.6 KW Tool holder: HSK 32 DIN 69893 (Form F) Tool magazine: 8 places (magazine plate) Number of tables: 2 pieces Table size left: 1300 x 1000 mm Table size right: 1300 x 600 mm Spindle / table distance: 943 mm Table load: 1000 kg Feed speed X+Y: 80 m/min Feed speed Z: 40 m/min Feed speed B: max. 360 °/sec Feed speed C: max. 360 °/sec Feed speed V: 50 - 100 m/min. Total power requirement: approx. 26 kW Machine weight: 10.0 t Machine dimensions: 7.5 x 3.1 x 2.5 m EQUIPMENT 2 work tables (total working area W:5300 x H:1100mm) Renishaw infrared sensor Vacuum pump manufacturer BECKER, capacity 162 m³/h Pressure accumulator (connection 6- 10bar) Cooling unit manufacturer Rittal type SK 3336.089

more

Auction

6

Ends in

 d  Hrs  Min  Sec Auction ended

Vertical lathe

Titan Umaro SC 43 - F01

€90,000

Condition: refurbished (used), Year of construction: 2010, Functionality: fully functional, Contrary to the provision described above, the machine is provided EXW free loaded TECHNICAL DETAILS Table diameter: 4000 mm Faceplate diameter: 4000 mm Turning diameter: approx. 4300 mm Cb9ts08 Rotation diameter: 4300 mm Control for program: Siemens Sinumerik 840D Vertical adjustment of supports right Z1: 705 mm Vertical adjustment of supports left Z2: 990 (+200) mm Workpiece height: max. 2580 mm Workpiece weight: 18.0 t Speed: 50 - 100 rpm Height above floor to top edge of table: 1090 mm Distance between side uprights inside up to a height of 500 mm: 4,300 mm Distance between side uprights inside from a height of 500 mm: 2,580 mm Height lower edge of support/table: max. 2,250 mm Distance left support Z 2 to table: max. 2,560 mm Distance right support Z 1 to table: max. 2,550 mm Distance left to right support Z2 to Z1: max. 4,830 mm Carrier lift adjustable in height on side stand: approx. 2000 mm MACHINE DETAILS Total power requirement: 150 kW Machine weight: approx. 88.0 t Machine dimensions: 6,000 x 8,000 x 6,400 mm Footprint: 8.0 x 10.0 x 6.8 m EQUIPMENT 4x clamping elements approx. 1200 mm (additional clamping jaws optionally available) Various supports for alignment (height) lying on pallet Chip conveyor (6.9 x 1.25 x 1.1 m)

more

Auction

8

Ends in

 d  Hrs  Min  Sec Auction ended

Universal machining center

Deckel Maho DMC 60U

€16,000

Condition: good (used), Year of construction: 2000, Functionality: fully functional, TECHNICAL DETAILS travel X / Y / Z: 600 / 700 / 600 mm pallet: 630 x 500 mm speed: 70 -12000 rpm C-axis index: 0.001 number of pallets: 2 workpiece weight: max. 600 kg Control: Heidenhain Mill Plus rapid traverse: 40 m/min Tool holder: SK 40 number of tools: 60 tool size D x L: (100/160) x 350 mm tool weight: 10 kg MACHINE DETAILS dimensions: 5452 x 5400 x 2628 mm weight: 9.000 kg Bikkgxcuqwi EQUIPMENT Chip conveyor High pressure cooling system through spindle (IKZ) 3 pallets Spray gun

more

Auction

10

Ends in

 d  Hrs  Min  Sec Auction ended

Form fill and seal machine

Ravizza Packaging SRL SIMPLICITA BAG SMART 400 H

€11,000

Condition: good (used), Year of construction: 2020, machine/vehicle number: 0711/2020, Functionality: fully functional, TECHNICAL DETAILS Thermal transfer printer: EIDOS Portioning: Collecting hopper for the counted packaging of several parts Product requirement: free-flowing, countable Film type: LDPE tubular film in rolls Film thickness: 50 - 120 µm Film roll diameter: 300 mm Roll weight: approx. 25 kg Maximum bag width: 80 - 400 mm Maximum bag length: 30 - 650 mm Dm3wlt MACHINE DETAILS Compressed air connection: 6 - 7 bar (dry) Power supply: 230 V / 50 Hz Dimensions: 820 mm x 1040 mm x 1170 mm Machine weight: approx. 200 kg

more

Auction

6

Ends in

 d  Hrs  Min  Sec Auction ended

4-axis horizontal machining center

FEELER FMH 500

€20,500

Condition: good (used), Year of construction: 2009, Functionality: fully functional, TECHNICAL DETAILS Control system: Fanuc 18i-MB Working area: 762 x 710 x 710 mm Table size: 500 x 500 mm Speed: 8000 rpm Tools: 40-fold Gp8y7k9b9 Pallet changer: 2-fold Cooling system: IKZ Feed: 30 m/min Rapid traverse: 20 m/min MACHINE DETAILS Weight: approx. 13,500 kg

more

Auction

6

Ends in

 d  Hrs  Min  Sec Auction ended

Bracket milling machine

Kraft MU-50 SL

€25,000

Condition: new, Functionality: fully functional, Brand new console milling machines with the following features: Stable and torsion-resistant construction Universal swivel head - milling cutter (Huron) can be positioned at any spatial angle Large working area of up to 2000x500 mm and up to 1,800 kg table load Turcite-B coating for smooth running of the axes Vertical universal head can be rotated 360° for versatile cutting performance. Vertical and horizontal spindles each with their own powerful drive Extensive range of standard accessories Heavily ribbed and torsion-resistant machine frame Wide, stable and hardened guides guarantee stability and lasting accuracy Precisely ground guides with hardened surface for long-term stability and wear resistance TECHNICAL DETAILS X-travel: 1500 mm Y-path: 700 mm Z-path: 500 mm Universal milling head: manually swiveling, 360° Speed range: 30 - 2050 rpm (27 steps) Table clamping surface: 500 x 2000 mm Table load: max. 1800 kg E2mt3aq T-slots: 5 x 18 x 80 mm Spindle holder: 50 ISO Servo motors: in all axes CNC control from: Siemens/Fanuc/Heidenhain Distance between spindle nose and table: 25 - 525 mm Feed rates X/Y/Z: 10-1000 / 10-1000 / 5-500 mm/min Rapid traverse X/Y/Z: 2200 / 2200 / 1100 mm/min MACHINE DETAILS Drive power: 7.5 kW Machine weight: approx. 5 t Machine dimensions: 2625 x 2260 x 2180 mm The pictures and video show an MU-46.

more

Auction

6

Ends in

 d  Hrs  Min  Sec Auction ended

Nordrhein-Westfalen, Germany

18,494 km

Crawler work platform

Platform Basket Spider 15.70E

€40,000

Call

Condition: like new (used), Year of construction: 2023, Operating hours: 8 h, Functionality: fully functional, Crawler work platform in mint condition with only 8 operating hours. 14.5 meter working height with 6.50 horizontal outreach TECHNICAL DETAILS Working height: 14.50 m Lateral outreach: 6.50 m Basket floor height: 12.50 m Load capacity: 230 kg Rotation range: 360 degrees Basket dimensions: 1.50 x 0.70 m Basket rotation angle: ± 70° MACHINE DETAILS Gw989cu Drive: electric Min. length in transport position: 4.674 m (3.991 m without basket) Min. width in transport position: 0.79 m Min. height in transport position: 1.99 m Stand installation area: 2.8 x 2.8 m Maximum lateral inclination: 18 °/% Maximum horizontal inclination: 18 °/% Maximum speed: 2.0 km/h 220 Vac electric motor: 3/2.2 cV/kW Electric motor 24 Vdc: 5.4/4 cV/kW Battery capacity: 300 Ah EQUIPMENT documents Additional information Double speed (2 driving speeds) Hydraulic basket rotation White chains Wheel chocks incl. bracket Electric emergency lowering

more

Auction

3

Ends in

 d  Hrs  Min  Sec Auction ended

4-axis vertical machining center

AXA VSC 2-M/2E

€12,000

Condition: used, Year of construction: 2001, Operating hours: 39,500 h, Functionality: fully functional, TECHNICAL DETAILS x-path: 2360 mm y-path: 600 mm z-path: 1000 mm table surface: 2500 x 640 mm Control: TNC 430 A HEIDENHAIN Spindle speed: 8000 rpm Spindle drive: 35 kW Spindle holder: SK 40 Tool changing device: 76 (2x 38) slots MACHINE DETAILS Mb8a3fti2n Total connected load: 69 kW Dimensions L x W x H: 7.5 x 2.81 x 3.4 m Machine weight: approx. 14 t Switch-on hours: approx. 92,000 h Program run: approx. 39,500 h EQUIPMENT Moving column machining center for pendulum operation incl. 2 pieces dividing head ( 4th axis ) D = 300 mm left table / right table chip conveyor electric hand wheel Coolant system with paper belt filter screen renewed X-ball screw and bearing new

more

Auction

9

Ends in

 d  Hrs  Min  Sec Auction ended

Scrubber drier

Tennant M20

€13,000

Condition: good (used), Year of construction: 2020, Operating hours: 170 h, Functionality: fully functional, Ride-on sweeper/scrubber-drier with new sweeping rollers Effective cleaning in just one step - wet or dry - with FloorSmart®, the integrated cleaning technology TECHNICAL DETAILS Working width: 1,020 mm Working width with side scrubbing pad: 1,370 mm Working width with side brush: 1,420 mm Scrubbing fan speed: 11,000 rpm Water pressure height of scrubbing fan: 890 mm Speed of the sweeping fan: 6,500 rpm Air flow of the sweeping fan: 8.2 m³/min Scrubbing roller speed: 480 rpm Scrubbing roller brush contact pressure: max. 177 kg Scrubbing brush Brush diameter: 300 mm Side brush Speed: 150 rpm Scrubbing disk diameter: 410 mm Sweeping brush diameter: 533 mm Fresh water tank: 212 l Tank capacity with ES®: 280 l Pick-up tank: 276 l Demister chamber: 61 l Sweepings container capacity: 110 l Sweepings container weight capacity: 177 kg Emptying height: 1,520 mm MACHINE DETAILS Forward transport speed: max. 13 km/h Reverse speed: max. 4.8 km/h Max. Gradient for transport with gross weight: 10.0° / 18 % Max. Max. incline in operation (cleaning): 8.0° / 14 % Bipje2q22a3 Ground clearance (transport): 80 mm Engine: Diesel (1.5L) Gross power (intermittent): 18.5 kW Tennant power, regulated: 18.5 kW Length: 2,410 mm Width to frame: 1,270 mm Width rear scraper bar: 1,300 mm Width with side brushes: 1,473 mm Height: 1,473 mm Height with overhead guard: 2,120 mm Unladen weight: 1,497 kg Smallest turning circle: 2,790 mm

more

Auction

5

Ends in

 d  Hrs  Min  Sec Auction ended

Lathe

OKUMA LB 25 II

€8,000

Condition: used, Year of construction: 1994, Functionality: fully functional, TECHNICAL DETAILS Turning diameter: max. 420 mm turning length: 650 mm Bar passage: 90 mm Turning speed: 2200 rpm Tool holder: OKUMA original 12-position automatic turret complete with P/tools Chuck: 380 mm, KITAGAWA self-centering Spindle power: 30/22 kW Dm7plj EQUIPMENT tailstock Chip conveyor Presetting

more

Auction

10

Ends in

 d  Hrs  Min  Sec Auction ended

Laser cutting machine

Bystronic Bystar 3015

€20,000

Condition: excellent (used), Year of construction: 2011, Operating hours: 18,000 h, Functionality: fully functional, TECHNICAL DETAILS Travel: 3048 x 1524 x 170 mm Laser: Bylaser 4400 W Wavelength: 10.6 µm Cutting capacity steel: 25 mm Cutting capacity stainless steel: 20 mm Cutting capacity aluminum: 12 mm MACHINE DETAILS Switch-on time: 33375 h Laser switch-on time: 18000 h Installation dimensions: approx. 5200 x 10200 mm EQUIPMENT Gas cooler Vacuum pump Turbo blower transformer Bo8o0bsi Protection with light barriers

more

Auction

10

Ends in

 d  Hrs  Min  Sec Auction ended

Thread rolling machine

GROB RM 208

€9,000

Condition: refurbished (used), Year of construction: 2023, Functionality: fully functional, Retrofit of the machine in 2023 - Complete repainting - Replacement of the electrical control system with SIEMENS PLC - incl. interface for robot loading - Hydraulics checked - Drive train checked - Main bearing and support bearing geometrically checked - Slide guide geometrically checked - All defective mechanical parts have been replaced TECHNICAL DETAILS Rolling pressure: 5t Feed: hydraulic Rolling time: SPS Rolling spindle speeds: 40 - 80 - 140 rpm Bipnx0kvxcg Rolling spindle diameter: 28 mm Pick-up length: 60 mm Workpiece diameter: 2 - 25 mm MACHINE DETAILS Electrical connection: 4 kW Weight: approx. 1t

more

Auction

15

Ends in

 d  Hrs  Min  Sec Auction ended

EDM machine + robot

AGIE Hyperspark 2 HS

€8,000

Condition: used, Year of construction: 2007, Functionality: fully functional, AGIE Hyperspark 2 + Erowa Multi Twin robot Ball screws + new X and Y motors in one machine Bipneipqslu TECHNICAL DETAILS Origin/history: Used by watch manufacturer Software loading disks: available Number of robot tools: 150 Number of robot pallets: 30 Table chuck: included in scope of delivery

more

Auction

15

Ends in

 d  Hrs  Min  Sec Auction ended

Vertical machining center

Mazak FJV 250

€8,000

Condition: good (used), Year of construction: 1998, Operating hours: 45,468 h, Functionality: fully functional, TECHNICAL DETAILS Travel X / Y / Z: 1020 / 510 / 460 mm Spindle speeds: 35 - 12,000 rpm Biojx2038xv Control: Mazatrol PC Fusion CNC 640 M Workpiece size: max. 1380 x 750 mm Workpiece weight: max. 1200 kg Spindle holder: SK 40 MACHINE DETAILS Installation dimensions L x W x H: 4 x 2.4 x 3 m (including chip conveyor) Drive power: 22 kW Cooling: IKZ 15 bar EQUIPMENT Chip conveyor Tool measuring unit documentation

more

Auction

12

Ends in

 d  Hrs  Min  Sec Auction ended

Planer and moulder

WEINIG Unimat 3000 Brillant

€20,000

Condition: good (used), Year of construction: 2001, machine/vehicle number: 94026, Functionality: fully functional, TECHNICAL DETAILS Connected load: 129 kW Working width: 20 - 230 mm Working height: 10 - 160 mm Bimt8zeyawf

more

Auction

5

Ends in

 d  Hrs  Min  Sec Auction ended

Lathe

OKUMA LB 25 II

€8,000

Condition: used, Year of construction: 1996, Functionality: fully functional, TECHNICAL DETAILS Turning diameter: 420 mm turning length: 1250 mm X-axis: 300 mm Z-axis: 1275 mm Bar passage: 90 mm Turning speed: 2200 rpm Tool holder: OKUMA Original 12-position automatic turret complete with P/tools Chuck: 380 mm, KITAGAWA self-centering Spindle power: 30/22 kW Bimtc2cqvmz EQUIPMENT tailstock Chip conveyor Presetting

more

Listing

Nelson

144 km

Filleting Machine

Marel MS2730

€450,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 2018, Only 1100 running hours. (Across approximately 2 years) now surplus to requirements. Automatic infeed. Great condition, perfect working order and excellently maintained. Inspections welcomed. Additional photos and video can be provided in the New year. Chs8unbbjv Available immediately. Significant Spares also available at additional cost.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

4

Victoria, Australia

2,746 km

Gibson 6ft Bandsaw & Electrical Boxes

Gibson

US$20,000

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: not inspected (used), Functionality: unexamined, Gibson 6ft Bandsaw available. Comes with electrical boxes and spare blades Ivrsiu97f

Send inquiry Send inquiry Already requested more

Listing

Unanderra

2,228 km

High Speed Stamping Press

BRUDERER BSTA 30II (BSTA25)

US$25,000

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 1982, All offers will be considered! BRUDERER BSTA 30II (BSTA25) Precision high speed punching press. Nominal capacity: 250 [kN]; 25 [tons]. Min./Max. number of strokes: 100/1500. Year of manufacture: 1982. Max width of strip: 203 [mm]. Variable stroke: 13, 16, 19, 25, 32, 38 [mm]. Fitted with one roll feeders BBV 202/120. on the left Feed length variable up to 120 [mm] max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted with spring feet dampers. Table dimensions: 530 x 530 [mm]. Passage between the supports: Longitudinal 540 [mm]; Lateral 203 [m Slide adjustment 51 [mm]. C33gg8qxa All technical documentation in English language included. Press weight. 5000 [kg]. Press height: 2520 [mm]. Fully refurbished under licence by Bruderer Singapore in 2002

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

2

Gold Coast

2,427 km

DOOSAN LYNX 220LC

DOOSAN LYNX 220LC

US$26,090

EXW Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 2007, Doosan LYNX 220 LC CNC Lathe PRICE REDUCTION -Reliable and high-performance CNC lathe, perfect for a variety of applications. This machine is in excellent condition and has been well-maintained. Features: 8l9ryi3dt3 Max turning diameter: 12.6" Max turning length: 20.7" Swing over bed: 20.1" Spindle speed: 4000 RPM 12-station automatic turret Fanuc CNC control Benefits: Accurate and precise machining Fast and efficient production Easy to operate and maintain Durable and reliable This lathe is on offer from the same company as the following high pressure water jetting equipment Price is in USD, and does not include taxes.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Australien

4,162 km

Lathes

Mazak QUICK TURN NEXUS 450 II

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand Mazatrol Model Matrix Nexus Main Drive Spindle speed range 2000 Spindle motor power 50/40 HP Movement X-Axis Movement 308 mm Y-Axis Movement 1070 mm Z-Axis Movement 1025 mm This MAZAK QUICK TURN NEXUS 450 II lathe was manufactured in the year 2008 in Japan. It is equipped with a Mazatrol Matrix Nexus control unit. The machine has a spindle speed of 2000 rpm. Application Types B29vxb0u Turning

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

12

Vermont South

2,565 km

Foilstamping

YAWA YMTL 750A

€7,700

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: like new (used), Year of construction: 2001, Yawa TYML 750A hot foil printing Manufacturer: Yawa Shanghai Size: max 750 x 560 mm Weight: 4200 kg Power Req.: 380 V / 50 Hz Installed power: 10 kW Used space: 2.600×1.720×1.975 mm Warranty: as is Availability: In Stock Delivery: immediately Status: 2001, very good condition Yawa TYML 750A hot foil printing Max sheet size/Coala maxima : 750×560 mm Min sheet size/ Coala minima : 280×220 mm Inside chase size/suprafata interioara ramei: 700×500 mm Stock range/ Gramaj hartie-carton Min.Sheet: 90g/sqm Zfmbgtkm Cardboard 157-2000g/sqm E、B Flute Max speed/Viteza maxima : 2500 sph Heating zones.Zone incalzite: 4 zones Electric Power/Putere instalata : 10 kW Max pressure/Presiune maxima: 110 tons Power supply/Alimentare electrica: 400V, 3Ph, 50Hz AC with PE, Feeding pile height/Inaltime stiva alimentare: 800 mm Delivery pile height/Inaltime stiva eliminare: 160 mm Dimensions/Gabarit: 2600×1720×1975 mm Net weight 4200 kgs/Greutate: 4200 kg It can die-cut, stamp and emboss on different printing and packaging products, such as paper above 90gsm, cardboard, corrugated paper below 4mm, adhesive paper, laminated paper, plastic card, PVC and so on. Price of Euro 7.700 Load On truck/ Load On container in Melbourne Australia.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Gold Coast

2,427 km

CNC MILLING MACHINE

DOOSAN DNM 650

US$48,900

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 2008, Doosan DNM 650 CNC Milling Machine 8l9lbwnrru PRICE REDUCTION - Reliable and high-performance CNC milling machine, perfect for a variety of applications. This machine is in excellent condition and has been well-maintained. Get in touch today to learn more!

Send inquiry Send inquiry Already requested more

Save search query