CNC Turning Milling Center

Nakamura Tome WT-150

Condition: used, Year of construction: 2005, Technical details: turning diameter: 356 mm turning length: 705 mm control: MSX 850 MAPPS II swing dia.: 755 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 (+-50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min rapid traverse Y-axis: 10 m/min Rapid travel B-axis (parts transfer subspindle): 30 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 6000 1/min Spindle 2 power: 11 / 7,5 kW turret stations / rotary tool stations: 16 / 16 VDI 30 : 5.5/5,5/3,7 kW speed of driven tools: 6000 1/min total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t Dkodoy H R D Topfx Ah Ijn dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m Accerories Chip conveyor Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by MAPPS II Control. *

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Dkodpfxsx I A Awj Ah Ijn Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 12,000 rpm, We offer you: Manufacturer: MORI SEIKI Model: NT 4200/1000S Year of manufacture: 2006 Control: MITSUBISHI M-720BM (MAPPS 2) Technical Data: Turning length: 1,000 mm Bar capacity: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Dedpfx Aoxxraqjh Ijkn Counter spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Milling spindle: Speed range: 0 – 12,000 rpm Tool interface: Capto C6 Number of tool positions: 100 Hollow chuck: Ø 67 mm Operating hours: approx. 27,000 h Spindle hours: approx. 16,100 h Technical features and equipment: - Y-axis - Fully indexable B-axis - Chip conveyor, discharge to the right - Standard coolant system - Interface for high-pressure coolant system, 70 bar - Tool spindle with through-coolant - Coolant spray gun - Air blast through counter spindle - Manual tool presetting on the main spindle - 3-color signal light - Double foot switch - Simultaneous 5-axis machining - Automatic power shut-off - Tool offset for 5-axis machining - Programmable data input - Dynamic diameter/radius exchange - Stroke check before movement Operating hours: 26,875 h (as of 22.08.25) Spindle hours: 16,093 h (as of 22.08.25) Accessories, illustrated tools, and clamping devices are only included if explicitly specified in the additional information. Subject to change and error in technical details and specifications. Prior sale reserved!

Condition: good (used), Year of construction: 2021, functionality: fully functional, Machine has 920 spindle hours. Mori Seiki NLX 2000 turning/milling center, year of manufacture 2021, Celos 730 UM / Mapps control system, X/Z travel 260 / 590 mm, Y-axis +/- 50 mm, bar diameter up to 65 mm, main spindle with C-axis, spindle speed up to 5,000 rpm, 12-station BMT turret, driven tools, NC steady rest, tailstock, tailstock spindle speed up to 6,000 rpm, chip conveyor, high-pressure cooling system, oil mist separator, manually adjustable tool pre-setter, swiveling inside the machine, part catcher for main and tailstock spindles, Irco short bar loader ILS, gear hobbing, Dedpfx Ahsy Ti Uws Iekn gear skiving.

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: NL201EC0331, Mori Seiki NL 2000MC/500 Year 2005 Still in production, viewing possible Dkodpoyymhhofx Ah Isn Motor 11 kW, 26 kVA 5000 RPM Many (driven) tools available Spindle ASA 6

Condition: excellent (used), Year of construction: 2007, operating hours: 7,690 h, functionality: fully functional, machine/vehicle number: NL301GJ1021, Technical data - MORI SEIKI NL3000Y/1250 Operating hours: 7,690 h Year of manufacture: 11/2007 Number of axes: 5 X-axis travel: 280 mm Y-axis travel: 120 mm Z-axis travel: 1,300 mm Spindle bore: 105 mm Number of tools: 12 Spindle power: 22 kW Spindle speed: 3,000 RPM Swing over bed: 995 mm Swing over cross slide: 825 mm Maximum turning diameter: 420 mm Bar capacity: 90 mm Maximum turning length: 1,260 mm Milling motor power: 5.5 / 3.7 kW, speed 6,000 RPM Rapid traverse rates (XZ): 30 m/min Tailstock body travel: 1,284 mm Tool setter, 3-jaw chuck, coolant system, interlocked safety guards, low-voltage lamp Dimensions (approx.): Dedpfx Ahey Sxh Dj Iokn L x W x H: 5,200 x 3,400 x 2,270 mm Weight approx. 8,100 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe Dodexwy S Eepfx Ah Iskn (2 machine cell) Model: LVT 400 Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: excellent (used), 4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm Dsdpfsfpif Sjx Ah Iokn -Weight: 30.9 kg

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Dksdpfxjy Spuus Ah Isn

Condition: ready for operation (used), Year of construction: 2004, operating hours: 9,900 h, MURATEC MD 200G Year of manufacture: 12 / 2004 Control unit: Fanuc 18 it Integrated gantry loading system with travels of 2100 mm + 2250 mm Z-axis gantry stroke increased by 100 mm (“Z” axis shift) Dedpfow E D Tlex Ah Iokn Gantry with increased payload capacity (12+12 kg) Muratec WFL 20-280 workpiece feeding system No. 2 Autoblock BH 250 self-centering chucks No. 2 servo-controlled turrets with 10 positions for driven tools Static toolholder kit No. 2 radial driven toolholders No. 2 axial driven toolholders “C” axes for both spindles, continuously adjustable to 360,000 positions Coolant + air outlet above left and right spindles “PEL” device on right spindle Belt-type chip conveyor with rear discharge Rigid tapping software TOOL MONITOR software TOOL LIFE MANAGEMENT software CE mark