Ice bull for sale

Your location was not identified (Edit)
Enter your address
or
Move
1

Strip bullet device Folmer OK 90

Krefeld, GermanyGermany dealership location
18068 km
1996
good (used)
Dimensions: 400 x 125 x 100 mm Space: 500 x 500 mm, Weight of the mobile plant: 35 kg Strip length: 100 mm channel length: 200 mm complete with movable telescopic stand with display height 580-1530 mm Fq0uo2z more
3

Strip bullet device Foellmer OK 90

Kaarst, GermanyGermany
18072 km
1997
excellent (used)
Strip bullet device, suitable also for high expenses immediately from our warehouse Fwzz8u7 more
1

Tab Inserter Vacuumatic CUTI 2 mit Lasersensor

Dabergotz, GermanyGermany dealership location
17613 km
2014
used
Combined Universal Tab Inserter CUTI 2 Rqsh0ipt The Combined Universal Tab Inserter is Vacuumatic’s compact tab inserter system, enabling accurate tabbing and batching of sheeted piles with the minimum requirements of space and investment cost. Usually pedestal mounted, the unit can be interfaced directly to most printing presses, or triggered via a laser sensor attachment. The CUTI is often supplied to commercial printers looking for greater accuracy in batching their printed products. This ... more
3

Strip bullet device Fain OK 90 Foellmer OK 90

Schleusenstraße 9, 21762 Otterndorf, DeutschlandGermany
17789 km
1994
good (used)
Sell a strip bullet machine Foellmer OK 90 here built in 1994 Kb7jc2ff in good used condition. The counter was replaced by Fain, and built a Suptramat (by pressing a button under the counter to reset the counter to each one) Machine is on wheels Weight 35kg Height adjustable from 58-153cm Power supply 230V -Is mounted on the machine with a cable Strip length 10 cm time of truncation from 0-30 seconds adjustable -Long bullet Lance 50 cm from the front edge of the machine more
4
Strip bullet machine Foellmer DUPLICATOR DigiTab 2010 plus print - include - Mark = 1 operation -mint condition with menu-guided operation touch screen (display) at the rear of the housing The mobile and height-adjustable stand is hired by most machines at the delivery side Any number of 5-99999 is adjustable for the counting Strip bullet. Infinitely variable control of the Strip length 20-200 mm and fixed hold time ca. 0-10 sec of the counting Strip. Equipped with electronic preset co... more
2

Strip capital invested equipment Foellmer OK 90

Dabergotz, GermanyGermany dealership location
17613 km
1999
used
Dimensions: 400 x 125 x 100 mm, space: 500 x 500 mm, weight of the mobile plant: 35 kg, connection: 230 V, 50/60 Hz, impulse transmission by micro switches or opto-coupler (intermediate relay) by the machine counters (usually), timing: 0.9 sec at 100 mm Strip length, strip length: 100 mm channel length: 200 mm, fixed hold time of the Strip: infinitely adjustable from 0-30 sec, complete with Mobile telescopic stand with display height 580-1530 mm Frebs8pm Please note: On request we supply the... more
6
ICE-BULL dry ice blasting machine is made of high-quality stainless steel, in an attractive mesh, 3 mm are used as beam medium commercial dry ice of Cryo Pelletts, the 3 mm Cryo-PEL-letts can in a patented ice Crusher within the smallest gun fine particles that are less than 0, 5 mm, crushed the se be fine ice particles with compressed air to up to 300 m/sec. beschleu-nigt and increase mechanical damage to the Grundma-terials on impact on the basic material around the 700 to 1000 times its volum... more
0

Container turning device Gieseking SG 20 G

Bad Laasphe - Feudingen, GermanyGermany
17981 km
1979
good (used)
Container turning device Manufacturer: Gieseking Type: SG 20G Built: 1979 Fabr No 1398 max. Carrying capacity 20 tons. Umf.Speed 15/50 cm/min Nmz2d With drive side and running wheels more
1
Hydraulic copying device SAUTER Type probably KM 61 Copy setup length: 700 mm The guide rail length: 1100 mm Operating pressure: 60 bar Max Volume flow: maximum 7 litres / min. -Connections for oil supply and oil return -2 piece angle bracket for guide rail -Guide rail with 2 piece top brackets with peak width 850 mm Ikh9nz7 Full weight: 100 kg good condition The copy setup comes from a lathe. The appropriate hydraulic power pack and the recordings for the samples "Sauter" is offe... more
4
Type: BDU 50. Manufacturer ČZ STRAKONICE. Year of production 1972. Internal grinding range 3-50 mm. Ombi0o9u Internal grinding path length 200 mm. Swing 160 mm. Power 7 kW. Weight 1300 kg. Accessories see photo. more


ice bull
daily

New machines via email!

Stay updated!
9
Agie process regulator device PRD-08 B 629.792.3 with Agie process regulator device PRD-09 B 629.743.6, second-hand, low wear, 100% functional Bd8l7asbai more
2

Folding machines and devices MBO Falzmaschine T 500

Murr, GermanyGermany dealership location
18001 km
1992
ready for operation (used)
Technical data: Flat-pile feeders 1st folding unit with 4 pockets including vacuum pump Nmij2 more
5
Press power 160 to Ije88fvu0 Table 1000 x 700 mm Delivery promptly, subject to prior sale Pressing force: 160 to Table: 1000 x 700 mm Stroke: 20-120 mm Throat depth: 355 mm Height: 350/400 mm Tappet adjustment: 100 mm Stroke rate: 50/30 1/min. Plunger: 750 x 380 mm Clamping hole in the plunger: Ø 50 H8 x 85 mm Diarrhea hole: Ø 290 mm H7 Motor: 11 kW Length: 1270 mm Width: 2,310 mm Height: 2,685 mm Weight: 10.150 kg electro pneumatic clutch Bremskombinationfester table manual H... more
0

Container turning device Kistler BR 20000 S

Bad Laasphe - Feudingen, GermanyGermany
17981 km
2006
good (used)
Container turning device Manufacturer: Kistler Type: BR 20000S Be2bljhh8w Built: 2006 max. Carrying capacity 20 tons. more
6
Straightening machine, band VG Gearmotor LENZE setting device Type 11.712.02.10 Output speed 12 to 72 RPM infinitely variable geared motor Torque 80 to 40 nm Roller speed limit 19-115 RPM. Set roll width 520 mm Rollers diameter 90 mm Setting rollers number total 4 pieces Engine power 0.37 kW Power supply 380 v, 50 Hz -stepless speed adjustment via hand wheel to the geared motor -Drive on open gear drive -Set roller top mechanically to the adjust -on stable metal substructure -Strai... more
6
Agie process regulator device PRD 10B 614.130.3, second-hand, low wear, 100% functional Bd8l7kdguj more
4

Folding machines and devices MBO Falzmaschine K66/6S SKTL

Murr, GermanyGermany dealership location
18001 km
1998
ready for operation (used)
Technical data: Pallet feeders Stream delivery Bejodoaqey with compressor more
4
Data: - 2 Canal gas filling - Suitable for all fumes - Argon gas flow 8,5l/min Be2eemw0eb - Type: GFA208 - Serial number: 177 - For insulating glass - with assembly status - Dimension: 165 x 515 x 400 mm - Power supply: 240 Volt, 45 Watt - Weight: 15 Kg Price on request more
3
Pneumatic rotary device with foot brake and suspension flank Disc wheels 300 mm Flanschsize 300x260 mm 4 recording holes slotted 75mm Dimensions 1040x520x400 mm HxBxT Be2a9vjmrp Price per rotary device We currently have 4 in stock more
6
Welding turntable - rotating welding device with enclosure Load capacity 50 kg Rotary Chuck diameter 300 mm Ss8jx0 Rotation feeding speed 1.0-15 RPM. Power supply 230 v, 50 Hz -Planspiral-lathe Chuck with Chuck JAWS stepped inside -Speed control adjustable via potentiometer -Drive with gear motor, rotation direction left -Start via electric switch -Welding power transmission with sliding -Suction connection ø 160 mm -Interior lighting Door opening W x H 715 x 1060 mm Interior dimen... more
11
-Our offer number: 23/97 -Banderolia machine, tape strapping machine, bundling machine, banding machine, Automatic Taping System -Manufacturer: ATS -Type: Us 2000 AB -Serial number: BT626 A64759 -230 V/50 Hz -Bandwidth 30 mm -up to 35 banderolites per minute -with foot pedal -Dimensions: 700 x 450 x 1230 mm (BxTxH) -Measures frame inside 360 x 260 mm (BxH) -on rolls -with instruction manual -optical state according to on request. ... more
4

Plane de-icing device Stalder Engineering Polnyia Tyohoon K415J

Klagenfurt am Wörthersee, AustriaAustria
17691 km
1999
unexamined (used)
th read km stand: About 79.196 km Built: 1999, vehicle has not yet been registered for road traffic. Government routes must be taken over by the buyer. Engine hours read: About 943.28 h Built year: Vehicle has never been registered for road traffic, administrative routes have to be taken over by the buyer Fous: 569 License plate: None Test badge: No test badge nacfh § 57a, government routes to be taken over by the buyer Facilities: Fabric equipment, 2-seater, various accessories in... more
4

Folding machines and devices MBO Falzmaschine MBO K530/4 SKTL

Murr, GermanyGermany dealership location
18001 km
2003
ready for operation (used)
Technical data: Pallet feeders Stream delivery with compressor Nk8yz more
10
There is a used plasma cutting equipment, CEBORA Plasmaprof162 with new accessories for burners without warranty. Description: Hvmrmwx PLASMAPROF162 is a constant DC power source with Chapper on the secondary circuit and control the cutting parameters and functions by microprocessor. The automatic ignition of high voltage/frequency pilot arc reduced the ermittierten during the ignition phase errors to a minimum. The power source detects the type of torch connected and automatically estab... more
7

Extrusion lines film line Saldatrice ARVOR 2000 GGL

Cerreto D'Esi, ItalyItaly dealership location
17814 km
1988
ready for operation (used)
ARVOR 2000 GGL WELDER: - Maximum width 2000 mm - Year 1988 Be03k8ovf3 -Open Mouth more
6
Oil-water separation device for compressed air systems COMPAIR type SE 2030 Oil separator for air compressor condensate Compressor capacity: approx. 350 m ³/h Reservoir volume: approx. 70 litres Length: 1150 mm Width: 800 mm Total height: 1150 mm -built-in carbon filter to the switch -wheeled base with castors Wrlqeo8p Weight: 50 kg good condition more
13
-Our offer number: 22/97 -Color sprayer, paint sprayer, sprayer, spray machine, paint sprayer, paint spraying machine -Manufacturer: Graco -Type: Airless Ultra Max II 695 Premium -Serial number: BA266 H12A -Model No.: 2411693 Nmz0z -max 227 bar -first 140 litres of paint sprayed, very little used -1300 watts, 230 V, 9 amps -Hose length about 15 m -IP20 splash-proof -Conveyance performance 3 L/min -Airless Pistol Contractor -Digital display -Tillback function -Autoclean cleaning s... more
3

Floor cleaning suction device Taski Swingo

Gemeinde Fernitz-Mellach, 8072, ÖsterreichAustria
17596 km
unexamined (used)
Saug-B about 550 mm, battery, with integrated charger, lost operating hours: Unknown, H8uhxvg ACTION: This is an online auction! more
4

Folding machines and devices MBO K 72/4

Murr, GermanyGermany dealership location
18001 km
1987
ready for operation (used)
Data on the machine 1 station with 4 pockets Pallet feeders Stream delivery Sword unit with 3 swords Be0a720h77 more
3
Product description of the manufacturer Powerful desktop MFP, ideal for work teams-large color touchscreen for easy execution of tasks, workflows at the touch of a button, enterprise-level manageability, security features, and optional expansion with easily integrated solutions. Consumables included -Toner cartridges compatible with HP CE255A-new Overhauled used device-the printer has been completely overhauled and cleaned by our technology. Wear parts may have been renewed. Since this is a seco... more
6

Welding device LORCH M-WIG 150GW-220V

Klipphausen, GermanyGermany dealership location
17637 km
used
Welding device Ki7dpbhu LORCH M-WIG 150GW-220V Technical method: Shielding gas welding CE-mark: No Required space lxwxh: 750x320x400 more
6
Back grinding machine JUNG type HA 20 GeräteNr: 3344 Profile depth: Max 15 mm Bdesf9jmjt Angle: 0 ° to 2° Magnetic disk: 115 x 115 mm Clamping range: 110 x 75 mm Magnetic plate height: 119 mm Workpiece dimensions L x W x H: up to 60 x 100 x 50 mm Current draw: 1 amp Operating voltage: 24-volt DC voltage (VDC) -mechanically shiftable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg good condition Suitable in the cutting tool mould for tapered relief cut pla... more
6

Supply air devices Cefla Abdunstwand

Petershagen, GermanyGermany dealership location
17864 km
1990
used
Manufacturer: Rippert, Type: Abdunstwand, Year: 1990, Control: hand, Filter surface in m³: ca.1800 X 2200 X 300, Exhaust air m³/h: 5000, Exhaust air m³/h: 5000, Year :1990 Rnuy0hjve more
4
centric clamping of shafts and bushings usable horizontally and vertically clamping width 80 mm clamping height - centre of prism approx. 160 mm Bbj9rftndk with longitudinal stop space requirements length - 370 x width - 190 x height - 200 mm weight approx. 50 kg more
7

Folding machines and devices Herzog & Heymann Falzmaschine M7.58 6-4

Murr, GermanyGermany dealership location
18001 km
2011
ready for operation (used)
Technical data: M73km2 Transfer type 850.3, 72 cm working width,. Bag Folding Unit M7. 46 folding rollers diameter 46 mm, downstream cutting roller (diameter 35 mm). Working width 72 cm, 6 folding bags, roller table high speed guides, sheet monitoring with 3 photocells Bag Folding Unit M7. 58 folding rollers diameter 58 mm, downstream cutting roller (diameter 45 mm), working width 52 cm, 4 folding bags, roller table with ball bar, sheet monitoring with 3 photocells,. MBO coupling box more
6

Bread slicer Wabäma Economy Plus 300.200

Enger, GermanyGermany dealership location
17904 km
2006
used
Bread slicer Wabäma economy manufacturer: Wabäma Model: Economy plus 300.200 Compakt Year of construction: 2006 400 Volt, 50 Hz very sturdy machine fully functional Slice thickness adjustable / up to the 30 cm length of bread Tested and cleaned Gjpwlm2i3 more
4
machine fully working Beq8oqyvxh with hot melt glueing station more
1
Deburring / Polishing / Dryer Rösler Rotofinish ST 1000 vibrator - cap: 1000 liter - 6,5 kW - Weight: 2500 kg - Dia: 2170 mm - Gutter width: 450 mm - Gutter height: 450 mm Bdma93prs7 Including watertreatment system and Rösler Dryer more
5

Rear loop device JUNG HA 20

Schwabach, GermanyGermany
17865 km
excellent (used)
Length: 380 mm Width: 200 mm Height: 134 mm . Permanent magnet clamping plate Clamping range: 110 x 70 mm Dwjw9m more
3
Elecdenschweissgeraet from a training workshop Nmvkx 350A at 40%ED 220A at 100%ED 380V 55A 220V 95A more
3

Folding machines and devices MBO Falzmaschine T 520/44X/4F

Murr, GermanyGermany dealership location
18001 km
2001
ready for operation (used)
Technical data: Nk8ez Flat-pile feeders, Vacuspeed, pressing station, MS control, sheet feed through pig grade, Arch alignment by means of ball bar, antistatic slidable lattice grate off Setup table, 2 x 4 buckle plates with reclining curved turnouts, 1 sword, belt drive, low maintenance, low noise, Creasing, perforation and cutting facilities for standard work, stream delivery, instruction manual, Max Planoformat: 52,0 x 72,0 cm, min. Planoformat: 10,5 x 15.0 cm more
7

Height measuring device TESA Micro-Hite 600

Beringen / Schaffhausen, SwitzerlandSwitzerland
18092 km
good (used)
Measuring height 600mm Resolution 0.001mm Bezwkno98k MARCELS MASCHINEN CH more
2
High pressure device Heisswasser, 230 bar, 960 L/h; Cleansing agent container, high pressure hose 10m, gun, double beam lure, Option: Hose drum with 20m HD hose € 459.00 Beq2mpf0y8 more
10
-Our offer number: 19/97 -Banderolia machine, tape strapping machine, bundling machine, banding machine, Automatic Taping System -Manufacturer: Akebono -Type: Ob 301 N -Serial number: 5757 -2005 model -230 V/50 Hz Be0zq8lseo -Power up to 30 banderolites per minute -Bandwidth 29 mm -Dimensions: 570 x 350 x 500 mm (BxTxH) -Arc size inside 390 x 205 mm -1 bump in the upper right area of the arch (see photo) -optical state according to photos -needed -functional Shipping on request... more
10
Internal article number: 19021 Tool preset device Manufacturer: Chalice Type: V 320 EAO Mash.-No: 1121 220v BStakes: SK50/SK40 Nmy07 2-Achs digital display Z 400/X 130mm Total measure (approx.): LxBxH 80 x 30 x 90cm Weight: About 80kg more
6
Vacuum lifting device, vacuum lifters Special handling device for an industrial robot Built in 2008 Load capacity 60 kg Suction foot clearance min. 120 x 150 mm Suction foot distance max. 700 x 600 mm -4 units suction feet Ø 100 mm -4 piece vacuum ejectors, vacuum generators PIAB with Druckluftanschlus Ø 8 mm ([...]) -2 piece cross member in the width by servo-motor adjustable from 150-600 mm -Suction foot distance about 2 servo drives adjustable from 120-700 mm -Suction foot rest abou... more
2

Folding machines and devices Heidelberg Falzmaschine BCUH 78

Murr, GermanyGermany dealership location
18001 km
2005
ready for operation (used)
Technical data on the machine Pallet jetty 1st station with 4 folding pockets and downstream knife shaft 3 folding swords Window folding bag with control unit B0w2ptpa Dandruff display SPH 70, built in 2007 more
6

Infeed device KALLFASS

Klipphausen, GermanyGermany dealership location
17637 km
2010
used
Bczlr93m0i Infeed device KALLFASS Workpiece length max mm: 6.000 Workpiece length min mm: 1.500 Workpiece width max mm: 300 Workpiece width min mm: 50 Workpiece thickness max mm: 120 Workpiece thickness min mm: 12 Feedrate max m/min: 350 Continuously variable feed: Yes Total connection kW: 30 Operating status: dismantled/ stored more
2
Stripe breaking device IMA Baxkcluk more


ice bull
daily

New machines via email!

Stay updated!

to

to

Edit search
ICE BULL
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.