Holzkraft hbs 433 for sale

Your location was not identified (Edit)
Enter your address
or
Move
3
Table size 600 x 430 mm About 270 mm maximum. With guided tours at the top and bottom Bezrd0nxa2 more
6
-Exhibition of machine- Blade guide upper blade guide below, quick clamping device with eccentric lever -Technical data- Roll diameter: 430 mm, cutting height Max: 270 mm, cutting width max with stop: 370 mm, cutting width Max without stop: 410 mm, table size: 610 x 431 mm, table tilt:-10 - + 45 °, cutting speed: 900 / 450 m / min., belt length: 3.345 mm, motor 400 V: 1,5 kW, Absaugstu records: 2 x 100 mm, dimensions: 768 x 512 x 2,048 mm, weight: 130 kg Scope of delivery: Bdm2byjpcl 3 ban... more
4
Wood strength HBS precision wood band saw for the craftsmen of top quality, workmanship and value for money Particularly quiet and precise operation thanks to a torsion-free machine housing Amply dimensioned cast iron saw table from one piece, with precision ground and polished surface. Saegebandschnellspannung on eccentric lever on the rear of the machine Equipped with two speeds Precise 3 roll blade guides, standard top and bottom from HBS 351 Fast cutting height adjustment knob and ra... more
6

Bandsaw Holzkraft HBS 433

More Holzkraft Hbs 433
Kempten-Leubas, GermanyGermany dealership location
17963 km
2018
good condition (used)
Roll diameter 530 mm table size 680 x 530 mm cutting width 474 / 514 mm with / without motor/voltage 1.5 kW / 400 V weight 163 kg approx. Lxwxh in mm 1024 x 793 x 2048 mm cutting speed 850 / 430 m / min Saw table tilt - 10° up to + 45 ° large-sized cast iron saw bench upper and lower roller Laser cutting line marking Bpqc29w7 Quick clamping system for saw blade tension more
1
new - Besonders ruhiger and präziser Lon dank eines verwindungsfreien Maschinengehäuses and einem soliden base frame aus Stahlblech - Grauguss-Sägetisch with präzise geschliffener and polierter Oberfläche - Komfortable Lasereinrichtung zur Schnittlinien- markierung - Sägebandschnellspannung about Exzenterhebel on der Maschinenrückseite - Serienmäßig with two speeds - Präzise 3-rolls-Sägebandführungen, serial-production top and bottom ab HBS 351 - Schnelle Schnitthöhenverstellung abou... more
3

Wood band saw Holzkraft HBS 433

More Holzkraft Hbs 433
Finnentrop-Heggen, GermanyGermany dealership location
17991 km
2018
new
-Precision wood band saw for the ambitious artisan -Especially quiet and precise operation thanks to a torsion-free machine housing and a solid steel base -Large-sized cast iron saw table from one piece, with precision ground and polished surface -Comfortable laser equipment for cutting line marking -Saegebandschnellspannung about eccentric lever on the rear of the machine -Equipped with two speeds -Precise 3-Roller blade guides, standard top and bottom from HBS 351 -Fast cutting height a... more
1
- NEW - Factory wood power Type HBS 433 S - Band saw with band saw blade clamping And two cutting speeds for the Professional users - precise 3-reel saw blade guides, As standard top and bottom - standard miter joint stop, Adjustable on both sides by 60 ° Iqrxmq7r - Height adjustment via handwheel with Rack guide - saw blade length: 3345 mm - Max. Cutting height / cutting width: 270 / 370-410 mm - Motor power 230 V / 50 Hz: 1,5 kW / 400 V Technical specifications: Working table dimensions: 6... more
4
-Saw flow length 4600 mm I3auluba -Cut width 620 mm -Cut height 410 mm -including various saw blades more
5
HOLZKRAFT® HBS 600 AS - precision wood band saw for professionals with large cutting capacity and many equipment options Especially quiet running thanks to modern torsion-free Steel machine housing and high weight Cast iron flywheels, dynamically balanced with rubber lining and chip scraper brush Large cast iron saw bench, adjustable from 0 ° to + 20 ° with ground and polished surface Industrial motor with safety brake Motor protection with undervoltage release Emergency stop switch Sm... more
2
Wood strength HBS AS of precision wood band saws for professionals with large cutting capacity and many equipment options -Modern torsionally rigid steel machine housing Oq0k3ypwa -Cast - flywheels, dynamically balanced with rubber lining and chip scraper brush -Large cast iron saw table, swivel from 0 degrees to + 20 degrees with ground and polished surface -Industrial motor with safety brake -Motor protection with undervoltage release -Smooth aluminium RIP fence, folding and collapsib... more


holzkraft ...
daily

New machines via email!

Stay updated!
5
-Combined sawing milling machine with swiveling saw blade and Sickable milling spindle and format sliding sled made of anodised aluminium · Work table made of heavily ribbed grey cast And base of welded steel Guarantee buzziness and vibration-free work · Two independent engines for each Labour unit · Format sliding sleighs made from anodised Aluminium for the highest cut precision · Schieper 2250 mm · Milling spindle brandishing Ozxcjxrr Included: LD 3 classic F 23... more
11
Average 305 mm Stampstock opening, cut width 435 mm Machine number 6660 Built 06/2000 Seperates control panel Saw height 34 mm Spare removal brush powered new!   All machines with emergency! Hydraulic version Cutting pressure control valve Hydraulic material tension Automatic switching from rush to sawing feed 2-Pillar System Stepless sawdriver over rite and tooth wreath Control range 20 – 100 m/min Frequency regulated Minimal lubrication system Monthly rent 200 euros. At the time of purchase, 2... more
2
Work table dimensions 530 x 230 mm Drilling width 200 mm Drilling depth 150 mm Drill head-height adjustment 200 mm Drill head tiltable 45 °-0 °-45 ° Bx0pddnk Drilling feed 0-16 mm Speed 2800 U/min Engine power 400 V, 50 Hz, 1.5 kW (2 hp) Extraction protection diameter 80 mm Weight 160 kg Dimensions 530 x 650 x 900 mm One-handed lever adjustment for fast and precise drilling more
2
cleaned, function tested, test run Beljzpajbb checking, setting, Partially overhauled by factory mechanic used, good condition manufactured by Hebrock type Euro 3001 CE tested for type examination edge band thickness 8 mm trimming from der roll to 3 mm Flush-radius chamfer milling feed speed ca. 10 m/min. sound protection hood moveable roller table located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen,   more
13
Table mill SCM / HOLZKRAFT minimax t45 classic used, year of constr. 2013 with 4-roller-feeder HOLZKRAFT Milling shaft 30 mm Useful height of milling shaft 100 mm Height adjustable by hand crank Max. Tool diameter milling 210 mm Be0o7gpeq0 Max tool diameter slots 275 mm Speed 3500-7000-10000 rpm Power milling motor 4 KW Feed unit with clockwise and counterclockwise rotation, 2 speeds each Extractable workpiece support Table dimensions 580 x 1000 mm + extensions left / right each... more
2

Saws Rusch Hbs 250 / 260 Rusch Hbs 250 / 260

Birmingham , United KingdomUnited Kingdom dealership location
18426 km
ready for operation (used)
Hbs 250 horizontal bandsaw / Industrial saw for sale This is a top model band saw which has the hand wheel variable speed so no changing of belts speed from 20 – 90 meters per minute. There capable of cutting up to 15” x 10” or 10” round and can cut 45 degree mitres. Steel cutting saw Bcn2vy8vd2   Used saws for sale   Specification:   Cutting capacity: Round:260mm Mitre cut @ 45degrees : 250 x 220mm Saw motor: 0.75 kw Coolant Pump :0.1kw Cutting Speed :Infinitely Variable 20-70m/m(65-230ft/min ... more
6
Type si x 32 A 3 UP, exhibition machine Pre-syringe unit, Swivel Parallel attack with electr. Positioning -----Technical Data Swivel range:-46-46 °, Cut length: 3,200 mm, Cut width with parallel stroke: 1,270 mm, Cut height 90 °: 136 mm, max saw blade (como: 400 mm), Pre-ricfixation sawsheet (1): 160 mm, Speeds: 4,000 U/min., Engine power 400 V: 9.5 hp/7.0 kW, Suction trimmings (120mm), Table dimensions: 1,000 x 685 mm Delivery & equipment Eloxed aluminium-format slit ... more
5
Material diameter 260 mm Masch. No.318 Building 12/79 With 5 years, no travel costs and wear and tear Monthly rent 200 euros. At the time of purchase, 2/3 will be credited. new!   All machines with emergency! Carbide sawing Be0wrstj0o All wear and tear parts renewed. Machine very good condition. Colour RAL 6011 Diving coolant pump With a late extender more
6

Polishing machine GOTTSCHILD HBS 1600 -800-100-1-L

Klipphausen, GermanyGermany dealership location
17637 km
2013
used
Polishing machine GOTTSCHILD HBS 1600 -800-100-1-L Working width mm: 750 Passage height max mm: 50 Nhezgyr2 Number of aggregates: 1 Type: Feed-through line Oscillation: Yes CE-mark: Yes Total connection kW: 4,5 Weight kg: 500 Operating status: basic functions can be shown Condition: good more
4
Engine power: 4.0 PS/HP (3.0 kW), year: 1992, Hobelbreite: 300 mm, thickness height: 230 mm, type: Samco FS 30, set-up lengths: 1495 mm, weight: About 230 kg, toothed table lips, swiveling auxiliary attack P0tc0h72 more
0

Front stacker Linde E14-335-02

More Linde E 14
Bremen, GermanyGermany dealership location
17840 km
2002
used
Height: 2175 mm Lifting height: 4770 mm Tyres front: front: SE tyres rear: SE tyre type front: 18 x 7-8 type hint: 15 x 4, 5-8 Rear tyres: front: SE tyres rear: SE tyre type front: 18 x 7-8 type hint: 15 x 4, 5-8 Type of drive: Electric Capacity: 1400 kg Free lift: 1568 mm Bepv2odkda Mast type: triplex more
4
Wood strength long hole drill LLB type Super P With adjustable boring unit of-65 degrees to + 65 degrees working table dimensions 700 x 400 mm Drill width 320 mm Drilling depth 190 mm Max stroke 230 mm Drilling head height adjustment 160 mm Drilling head tilting 65° - 0 °-65 ° Wescottbohrfutter 0-20 mm Speed 1500 / 3000 min-1 Engine power 400 V / 50 Hz 1.5 / 1.9 kW Dimensions L x W x H 1450 x 1000 x 1000 mm Mtuq3yk Weight 335 kg more
6
-Exhibition device- Nig2b Steel fan -Technical data- Dust nozzle: 200 mm, nominal power: 3.260 m³/h, filter surface: 2 x 3.6 m ², chip sample volume: 1 x 160 l, 400 V: 1,5 kW, dimensions: 1,440 x 480 x 2,200 mm more
4
Material diameter 320 mm Fearing ribbon saw sawdust swings into grade Grad setting well ablesgar over big nononius Material diameter 320 mm Orxchw0w Machine number 131 Built 03/91 new!   All machines with emergency! Lowering hydraulic and cruise control Saw wall measurement saw height 34 mm With minimal lubrication system Saw metal gliding Recording to safely move with forklift Monthly rent 150 euros, minimum rent 3 months more
6
Data nameplate: B0n7mkwc Type - Model ASA2001 Article no. 5122001 Serial no. 040534 Year of construction 2004 Rated voltage U = 400V / N / PE Frequency 50Hz / 3 Current type AC Full load current A.M.P. 4A Maximum absorbed power 1,5PS / 400V / 50Hz / 1125W Holzkraft ASA 2001 • Air flow freely sucking 2220 m3... more
4
Engine power: 13.0 PS/HP (10.0 kW), Hobelwelle: 4 Hobelmesser TERSA, built: 2016, Hobelwidth: 520 mm, thickness height: 240 mm, type: FS 52 Elite, set-up length: 2250 mm, weight: 700 kg, dickte:, advance speeds 5.8.12,18 m/, height adjustment by hand wheel With watch, CEE16 A. Balnyamdon more
15
Planer Thicknesser SCM / HOLZKRAFT FS 41 elite Tersa Year of constr. 2014, as good as new Approx. 10 working hours Minimax elite - the heavy machine line for craft and industry the leading-edge- technology of the SCM group with TERSA Planer knives quick-change system for Planer knife change within seconds Cutterblock diameter 87 mm / Tersa knives 4 pieces Surface Planer: Total length of tables: 2000 mm Task length: 1.034 mm Table height: 870 mm Working width: 410 mm Serrated ... more
3
Umreifungsmaschine Fabrikat: Signode Bdxp7nef0d Typ: HB-4300/4330 Baujahr: 2003 more
6
-Exhibition of machine- rotating grinding unit oscillation, height-adjustable grinding table, RADIUS grinding, rubber sanding drum, belt change of quick-clamping system, including miter gauge -Technical data- Grinding unit swivelling range: 0-90 °, sanding belt width: 150 mm abrasive belt length: 2.260 mm, dimensions work table: 680 x 310 mm, contact surface: 770 x 150 mm, speed: 16 m / s, suction connector: 2 x 100 mm, motor 400 V: 1,5 kW, dimensions (Lxwxh): 1,350 x 585 x 1,210 mm, weight: ... more
4
Rexroth MGF3-31 / 040RA07VM-A433 MNR: R900970908 FD: 10928, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Nejcb more
6

Veneer press ITALPRESSE ITT /4-33-13

Klipphausen, GermanyGermany dealership location
17637 km
1991
used
Veneer press ITALPRESSE ITT /4-33-13 Panel length mm: 3.300 Panel width mm: 1.400 Daylight opening mm: 200 Number of daylights: 3 Pressure kg/cm²: 8 Number of cylinders: 10 Operating temperature max °C: 200 Diameter cylinder mm: 98 Heating platens: Thermo oil Material of the platen: aluminium Parallel guidance by toothed rack: Yes Safety device: Yes Pressing force: electrohydraulic Type: Upstroking press Fh7blvl Total connection kW: 5 Required space lxwxh: 4500x1550x3200 Weight kg: 12.000 Oper... more
3
1 x used Workbench Nh7tx Manufacturer: wood power Type: A2 Year of construction: 2000 Technical data: Length: 2,000 mm Width: 800 mm Height: 950 mm Terms of delivery: free loaded terms of payment: prior to pick-up more
4
Combine Very good condition Tersamese wave 4 pcs. 41 cm hobelwidth 23 cm pass height 2 feed speeds Dpjb8xn Electric height adjustment Direction length 200cm DIgital display of thick-height 5 KW engine with engine brake more
5
-Exhibition of machine- incl. dowel device -Technical data- Work table dimensions: 500 x 200 mm, drill width: 200 mm, depth: 150 mm, height adjustment: 150 mm, speed: 3,000 rpm, Wescott Chuck: 0-16 mm, motor 400 v: 1.5 HP / 1,1 kW Scope of delivery: Eccentric clamp Bcssi0drff Long hole drill set 5 - PCs. clockwise more
4
Philips 4022 226 3433 CONTR TELET MOD C card, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Nei02 more
5
Oscillation: ja / nein : ja/nein : ja/nein tiltable up to: Grad Motor output: kW Table dimensions: mm sanding width: mm Weight: kg : mm : mm : m/sec : mm : Stk :ja : - : - : - :ja mm :nein - :ja - : m/sec :2250 mm :150 mm :nein Stk :nein Stk : - : mm : Set : - : - : Std Ju89ku :100 kg : cm : kW : kW :100 mm more
5

Milling machine Holzkraft T 45 classic

Hochheim am Main, GermanyGermany dealership location
18019 km
2016
used
New machine Year of build 2016 Stable steel-cast iron construction With rigid spindle 3 spindle speeds from 3500 to 10000 min¯ ¹ Milling spindle with right left rotation Large dimensioned milling unit of grey cast iron, directly at the table with Extractor hood attached under the work table for a better extraction Solid and precise cast iron table Fast and easy speed change Leistungstarker motor with 5.0 kW Standard protection cover milling Quality made in Italy Gvtzhs Installa... more
5

Hacksaw Kasto Kasto HBS 210/240

Reichenbach, GermanyGermany
18060 km
1994
excellent (used)
1 x ironing saw Kasto HBS 210/240 Built: 1994 Beautiful compact saw in technically flawless addition. Technical data: Cut range at 90 °: Around: 210 mm Mhvzeaki Flat: 240x190 mm Cut range at 45 °: Around: 150 mm Flat: 130 x 210 mm Sawdust length: 400 mm Heben/sink hydraulic Pre-thrust/cutting speed adjustable Stop: 500 mm The machine can be inspected at our warehouse under electricity. more
8

Bandsaw - Horizontal DAIß & PARTNER HBS 350 G

Goldenstedt, GermanyGermany dealership location
17875 km
2007
used
cutting diameter 320 mm saw band length 3660 x 27 x 0,9 mm cutting range 300 x 300 mm rapid traverse . coolant Micro-Cooler weight of the machine ca. 630 kg Bez0tz7bqx more
6
-Exhibition of machine- swiveling back, right / left rotation, including arch Shaper fence -Technical data- Table size: 1,080 x 665 mm, Swivel range: 45 °, length Milling spindle: 125 mm, Max Mills Ø: 240 mm, max. retractable router Ø: 230 mm, maximum cone cutters Ø: 320 mm, speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm, engine 400 V: 6.6 HP / 5.0 kW, dust nozzle Ø: 2 x 120 mm Nlgyd more
5
PhilipsCONTR TELET MOD C card, E status and serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bcjv2ppno0 more
2

Swivel spindle milling machine Holzkraft T 55 W elite S

Hochheim am Main, GermanyGermany dealership location
18019 km
2017
used
New machine Year of constr.: 2017 Facilities: The professional craftsman machine with Swivel Milling spindle and 4 speeds. Stable steel-cast iron construction Anodised ALU-Formatschiebeschlitten Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Four cutting speeds from 3,500 to 10,000 min-1, manually adjustable Bey0rlt Right left rotation as standard Display height and inclination 1/10 mm exactly Fast and easy speed change about eccentric tension S... more
1
max. Edge thickness 2mm Plate thickness max 45mm Nmir9 Feed 5m/min. Capping aggregate for flush caps of the front and rear edge overweathering Combined milling unit for flush fibrous and radius milling Suction trim 120mm Weight 270 kg Dimensions LxBxH 2040x1350x1290 more
6
machine Surface planing/thicknessing machin manufacturer Holzkraft type HMS 260 part Id-no. 2250951 Bygmseos year of construction 1995 ... more
6
-Exhibition of machine- Discharge rollers on the stop rulers, with swiveling grinding unit, and oscillating abrasive belt, veneer grinding device, oscillation with a separate motor, height-adjustable grinding table, pull-out extension of the roles table, rubberized Grinding roller -Technical data- Ptrfri Sanding belt dimensions: 3000 x 200 mm, dimensions work table: 960 x 350 mm, worktable Höhenverstllung: 230 mm, contact surface: 1050 x 300 mm, speed: 20 m / s, oscillating hub: 20 mm, dust ... more
4
Philips 4022 226 3433 CONTR TELET MOD C card, E status and serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bcjv03ncgy more
2
Capacity 250 m3/Hr, Pressure vacuum 0,5 mbar, With motor 7,5 KW, 220/380 Volt, Floorspace 1,3x0,5 M, Total height 1,0 M, Weight 380 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines! Dcswe9rz more


holzkraft ...
daily

New machines via email!

Stay updated!

to

to

Edit search
HOLZKRAFT HBS 433
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.