Automatic grinder buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Yrrjuk ERMA ASM 45 automatic knife grinder for chipper, planer and paper knives. with a working length of 4,300 mm (168") length capacity. -- Grinding motor with 7.5kW (10 HP) for the grinding head. -- Flood coolant system. -- Variable speed head travel and replaceable ways. -- Magnetic knife bar 10' x 8". -- Manuals and some tools. more
1
Bctygcgiqm Automatic belt grinder for Cutlery monobloc or hollow handle or similar parts. Two doubble stations left and right for grinding of edges of Knifes bothsides on same time. With oszylating. Different shapes by cam follower. Production Rate 400-500 pcs per hour more
5
- grindable pipe diameter up to 150mm - cross adjustment of support - adjustable depth stop - mitre grinding 30° to 90° - grinding belt dimensions 2000 x 150mm - surface grinding opening 300 x 150mm - contact plate B 150 / D 200mm Wvus8jh2 - pulley B 150 / D 200mm - grinding belt speeds 15 + 30m/min - drive 400 V / 2.6 + 3,1kW special equipment: - pneumatic feeding accessory GU RA - contact role 1 inch / 1 1/4 inch / 1 1/2 inch - suction more
5
• dimensions 1600x1220x1800 mm; • suitable for frozen meat; • 2 feeding speeds; • 1 grinding speed; P3aan7 • power 400 V, 50 Hz, 32,4 kW. more
4

automatic grinder Tormadex Lithormatic 1200 E 10

Gersfeld, GermanyGermany dealership location
6620 km
1993
used
Grinding diameter max. 180 mm grinding length max. 1200 mm Power:. 300-1800 pcs / hr. Spindle motor: 3.0 hp Oszilation: 0.75 HP brush reduction: 0.5 hp grinding diameter with 10 spindles 90 mm diameter grinding every 2nd Spindle: 180 mm Speed: 1500/2000/2600/3200 r / min. Weight: 1190 kg Machine dimensions (L x W x H): 2450 x 1200 x 1540 mm Cddjmlbf more
5
• Maximum tool width 330 mm • Tool diameter (min-max knife heads) 80 - 300 mm • Grinding wheel diameter (min-max) 125 mm • Grinding wheel bore size 60 mm • Grinding wheel speed 4000 rpm • Maximum grinding speed 530 mm/min • Grinding wheel drive 1,1 kW • Clearance angle 15 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW Jfcciqp • Connection values, total 2 kW more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Y2cpil CNC circular saw Topper/Facer is designed to gring the tops and faces of triple chip, variable pitch and alternating top or face. -- An industrial-grade computor and touch scree interface give the operator complete control of all functions. Grinding parameter for up to 14 saws, 6" to 36" diameter, can be stored in memory for instant set up. -- Features: -- Pentium 233 MMX [...] control. -- Touch screen for easy operation. -- Store memory for ... more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. Bbusl2nzmi GOECKEL G 65EL Automatic Straight Knife Grinder;Working length up to 5,080 mm (200") and 254 mm (10") for either planer or chipper knives. -- Construction: Welded in cell design. Guideways hardened and ground solid ways. Machine table electromagnetic with rotating chuck. -- Downfeed system: Servo variable speed down feed with impulse feed; end-end and rapid positioning. Feed rate 0.0002 ~ 0.02 mm/Min. -- Carriage/Head: Servo controlled varia... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Fwzscwn Rigid construction means low vibration displacement for super finish. Flood coolant with swing open splash doors keeping spray in the machine. -- Total removal grind with lift-off on return stroke. Precision alternate angle adjustment for right and left uniformity of 3/100 of a degree. -- Power saw lift with electronic control with automatic saw locator that sets saw to exact position. Power adjustment on hook and top angle moves head at the push... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 30ty9u9z WRIGHT W-150HB-B Automatic Face and Topper -- Heavy duty automatic saw sharpener for side grinding of carbide saw blades. Circular saw size 6" to 48". Blades up to 36" dia. are ground automatically; blades up to 48" are ground manually on this machine. -- (2) 3/4 HP motors for each grinding spindle, with spindle speed of 5,150 RPM's. -- Includes the following features: Grinds radial angles from 0 to 4°; tangential angles of 0 to 6°; and hook ang... more


automatic ...
daily

New machines via email!

Stay updated!
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvrq9odi US CONCEPT CHB-12 Hauncher/Notcher;The US CONCEPTS CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with & Spec's: -- 40 MM horizontal spindle that moves up hydraulically past the table with the clampe... more
2

Horizontal Bandsaws EVERISING 300HB Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Gtoxmyxr more
5
-----MACHINE AVAILABLE TO END USER CUSTOMER ONLY----- *****ONLY 14,700 HOURS UNIVERSAL STUDER S36 FAVORIT***** 500mm GRINDING WHEEL, 1000mm BETWEEN CENTRES x 175mm CENTRE HEIGHT, MOVABLE TAILSTOCK (not like many that are FIXED restricting machine setups!!!) WITH TAPER FINE ADJUSTMENT, WHEELHEAD ZERO DEGREES +/- 8.5 DEGREES, SENSITRON, LOW WORKING HOURS, IDEAL PRODUCTION GRINDER FOR GRINDING CARBIDE - TOOL STEEL - STAINLESS - HARDENED STEEL ETC....PRICE... more
6
cutting diameter 260 mm saw band length 2660 mm cutting width 400 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 160 x 260 mm capacity 45 degrees: square 160 x 160 mm capacity 90 degrees: round 260 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm material feed length 500 mm saw band feed 17-120 U/min dimensions of saw-band 2660 x 25 x 0,9 mm drive saw-band 1,5 kW drive hydraulic 0,25 kW total power requirement 1,75 kW weight of the machine ca. 66... more
5
total power requirement:4,2 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:1,5 x 2,5 x 2 m saw band length:4400 mm cutting speed:15 - 150 m/min work height max.:750 mm capacity 45 degrees: round:rechts 330 mm capacity 45 degrees: flat:rechts 320 x 335 mm capacity 45 degrees: flat:links 305 x 335 mm capacity 45 degrees: round:links 305 mm capacity 90 degrees: flat:500 x 335 mm Cnb8uaxs capacity 90 degrees: round:335 mm cutting range 30° flat:rechts 170 x 335 mm Cutting area at ... more
1

AUTOMATIC CNC SHAPER (SHAPE & SAND) UNIQUE 4500

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Etbidgf UNIQUE 4540 Shape and Sand (CNC) with (4) stations. -- General Description: (4) shaper heads of which (2) can be used for sanding. Ridged one-piece welded steel frame double spindle shaper (CNC controlled jump cope & cope) with two 45° tilting sanding stations. All heads are floating and displaced via rub collars making this machine suitable for shape and sand on pre-hogged arched raised panels. Jump cope on first shaper eliminates tear out o... more
15

Horizontal Bandsaws HYD-MECH H10A 10" / 254mm Twin Pillar Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. HSA0307115 Capacity Rounds 10"/ 254mm Squares 10" x 10" / 254mm x 254mm Zi8lntk Twin Pillar Yes Input 415/3/50 5hp approx Speeds 50-350 sfm Twin vices Yes Stroke of feed vice 24" / 609mm Multi Feed Yes Fitted with Coolant, Variable Downfeed, Bundle Clamp and Swarf Screw. Equipment 10' / 3048mm Roller Tracking Length Machine - 7' / 2133mm. Tracking - 10' / 3048mm Width Machine - 7' / 2133mm. Tracking - 2' 10" 863mm Height Machine - 5' 10" / 1778mm. Tracking - 2' 8" / 813mm Nett we... more
6
spindle passage 32 mm turning length 320 mm Control Mitsubishi weight of the machine ca. 3,05 t CNC lathe Citizen Cincom M232-III MCL 2032/1889 7-axis simultaneous control Machine incl. Bar magazine LNS Express332, full synchronous spindle between main and pick-off spindle C axis on the main spindle Bcsadl7q3g Accessories for machine: 6 tool holders right, height adjustable +/- 1,0 mm, Shaft 16 x 16 mm, for right or left tools 2 drill heads horizontally, n = up to 5'000 rpm, Collet holder... more
4
cutting diameter 250 mm saw band length 3010 mm cutting width 330 mm dimensions of saw-band 3010 x 27 x 09 mm cutting speed 35 / 75 m/min mitter cutting 45 ° power capacity 1,5 kW coolant 3gtisvayf voltage 400 V total power requirement 2,2 kW weight of the machine ca. 700 kg dimensions of the machine ca. 2,60 x 1,75 x 1,70 m - Fab. No.: 0003000633 more
9

Automatic cold saw SIMEC MEC 120BM 1LCN

Haaksbergen, NetherlandsNetherlands
6345 km
2004
ready for operation (used)
SIMEC MEC 120BM 1LCN Automatic cold saw for high volume production cutting Blade diameter: 250 / 350 mm Angle range: +/- 60 degrees Ccskufx min. cut capacity : 12 mm round cut capacity : max 100 mm Max cut Lenth 3000 mm Feeder 6000 mm plus more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Dmjlzo2 VOORWOOD A117B Shape And SandFeed through, single-sided Profile Shaper/Sander with CPU readout; feeds from right-to-left;. Specifications: -- 2-3/4" x 2-3/4" Min. part size, 3/8" - 1-1/2" max. thickness, and 1-3/4" max. profile faceEquipped with: -- (3) 5 HP Belt driven Shaping station -- (4) 1 HP - 1,500 RPM Disc sanding stations; 0° - 45° tilting on all units. -- 18 FPM Fixed feed speed, 1 HP feed drive; overhead holddown with (2) rows of t... more
6
cutting diameter 305 mm saw band length 5620 mm cutting width 305 x 380 mm Qmo9zdlkm cutting speed stufenlos 16-90 m/min total power requirement 7,2 kW single feed stroke 10-510 mm multiple stroke until 4590 mm main drive 5,5 kW hydraulic motor 1,5 kW coolant pump 0,12 kW dimensions of saw-band 5620 x 34 x 1,1 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 2,2 x 3,1 x 1,80 m Condition: good Electric 380 Volt CNC-control Cooling equipment Diverse sawbands Roller con... more
6

Bar Automatic Lathe - Multi Spindle TRAUB TB 42

More Traub Tb 42
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1970
used
number of spindles - Hp0w7obwc spindle passage - mm turning length - mm Accessories: Cross drilling unit, revolver quick drilling unit, curve etching more
6

Automatic Punching Press IMS PHY 45

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2000
used
pressure 45 t no. of strokes 27/13 Hub/min sheet width - mm Bctbcvrco2 weight of the machine ca. - t more
3

roll grinder WALDRICH Siegen WSIIb-10

Erwitte , GermanyGermany dealership location
6470 km
1968
good (used)
Used roll grinding machine Fabr. WALDRICH Siegen, type WSIIb-10 com 12316. Rev. 20.3.1968, part of overhaul and the new Cabinet in 2012. (also called reconditioned or CNC converted with 2 years warranty) TECHNICAL DATA B8z8tmvy Maximum grinding diameter / reel diameter approx. 1400 mm maximum measured tip height on the tailstock 700 mm maximum possible grinding length 5200 mm maximum distance tailstock to faceplate 5000 mm 2 grinding spindle speeds 420 / 1260 roller speed of stepless 1... more
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Hvmispp PROFILEMATIC Model FT-2 is a Single sided, double head, feed through shaper with floating heads. -- Single post with (2) 7.5 HP belt driven stackable arbors, both heads are air loaded with in and out movement on THK bearings, both arbors are motorized with LED readout for vertical positioning. -- 6" Wide-feed track with top and bottom rubber padded chain tops, both inverter driven with single control. -- Manual thickness opening of over-hea... more
4
turning diameter over bed 125 mm spindle passage 10 mm turning length 100 mm turning speed range 1000 - 10000 U/min Boring depth max. 70 mm F7jrsj2 speed control shaft 0,20 - 284 U/min total power requirement 5,00 kW weight of the machine ca. 2,50 t dimensions of the machine ca. 6,00 x 1,50 x H2,00 m Bar feeder IEMCA CS112/42/CT more
4

Bar Automatic Lathe - Single Spindle INDEX C29

More Index C 29
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1976
used
spindle passage - mm turning length - mm bore depth - mm Bcy8m3o9kd Accessories: Turning sets, various tool holders, collets, feed pliers more
6

Tool Grinder - Universal DECKEL S1

Günzburg, GermanyGermany dealership location
6748 km
1959
used
max. grinding diameter 130 - 320 mm grinding length 100 mm workpiece length 250 mm current capacity 380 kVA power capacity - grinding motor 0,55/0,75 kW turning speed range - power take off spindle 3750 U/min total power requirement 2,2 kW weight of the machine ca. 0,5 t dimensions of the machine ca. m Bcbytkzsjb Mechanic: normal Optical condition: good The machine can be viewed under current. operting key operating instruction 66129 380 V, 50 Hz, with CEE plug u. Electric wire Co... more
6
grinding diameter 1800 mm grinding length 10000 mm swing diameter 2000 mm grinding diameter - min. 80 mm grinding length min. 800 mm workpiece weight 50 t grinding spindle speed 5 - 1400 U/min roll drive 0 - 150 U/min feed speeds Z = 10 m/min feed speeds X = 5 m/min feed speeds Q1 = 2 m/min feed speeds Q2 = 2 m/min travel -z axis 11020 mm travel -x axis 850 mm U-axis -4,91 / + 4,95 = 9,86 mm roll drive 51 kW grinding wheel motor 22 kW total power requirement ca. 100 kW weight of the machine ca.... more
1
Elect./Voltage: 208/480 V, 60 Cy, 3 Ph Gvky2o UNIQUE 2700 CNC CNC Door ShaperCNC Controlled Machining Center for Raised Panel [...] with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK [...]: --... more
5
Automatical capsule filling machines SPT-FS50 Series (produced in S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to 5 (optional #000,5). The ma... more
9
STUDER S35 retrofitted with NEW SIEMENS CNC in 2017 eliminating the original Grossenbacher cnc CAN PROFILE WHEELSHAPES-MARPOSS AIR GAP CONTROL, AUTOMATIC WHEELHEAD SWIVEL FOR ANGLE GRINDING-LENGTH POSITIONING AT AN ANGLE (WITHOUT NEED TO STRAIGHTEN UP), EASY GLIDE DOOR, RIGHT SIDE START CYCLE-DRESS-ABORT CYCLE BUTTONS,....machines originally built from 1989 to 1993 *****MACHINE AVAILABLE TO END USER CUSTOMER ONLY***** WE SELL-RENT-BUY-OPERATOR TRAINING-GEOMETRY CHECKS-SERVICE ONLY STUD... more
9
Longitudinal travel 520mm Wheel diameter 175mm Bcyfc2td7f Dividing head with collets MARCELS MASCHINEN CH more
2

Hacksaw - Automatic KASTO PSB 260 AU

Bühl, GermanyGermany dealership location
6593 km
1982
used
cutting diameter 240 mm band length 450 mm cutting lenght max. 750 mm cutting range - square - 240 x 240 mm cutting range - flat - 260 x 180 mm dimensions of saw-blade 450 x 40 x 2 mm total power requirement 3,7 kW weight of the machine ca. 1,1 t Izdymdh - partly overhauled - acc.: 1 sawframe as spare part, various saw blades, coolant more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Nccxn UNIQUE 2700 CNC CNC Door ShaperCNC controlled maching center for Raised Panel [...] with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK [...]: -- Wind... more
5
Serial No. 700238 Capacity 360 mm diameter , Rectangular 704mm x 360 mm @ 90 degrees or 340 mm diameter , Rectangular 400 mm x 340 mm @45 degrees. Twin Pillar yes Input 415/3/50 4kw approx Speeds 20-120 meters per min. Swivel frame 0-45 degrees Vice opens 710 mm Fitted with coolant, work height sensor and variable downfeed. Length 3.6 m Width 2.2 m Nedvr Height 2.7 m Nett weight actual. 4800 Kgs (4.72 Tons) more
2

Semi-automatic seaming machine for cans Indosa MP 160

Wehr, GermanyGermany dealership location
6632 km
2007
ready for operation (used)
Semi-automatic sealing machine Indosa MP 160 for preserve tin and composite cans Output: up to 600 cans/h Diameter of can Ø: 40 - 160 mm Hight of cans: 20 - 220 (280) mm Compressed air: 5 bar Weight: approx. 35 kg Dimensions (WxDxH): 660 x 350 x 550 mm Elekt.supply: 0,3 kW Bcweojb0ai Semi-automatic seaming machine Indosa MP 160 is suitable for filling and closing of preserve, tin and composite cans; This machine is mainly made of stainless steel and anodized hard aluminium and ... more
11
"AS NEW" ONLY 3600 HOURS - HIGH PRECISION UNIVERSAL GRINDER S20-2 TOOLROOM EXTERNAL CYLINDRICAL GRINDER WITH INTERNAL READY (ANOTHER S20-2 400MM CENTRES WITH EXTERNAL+INTERNAL +ACCESSORIES ALSO AVAILABLE BY SEPARATE NEGOTIATION) Jd7uyxqr *****WE SELL-RENT-BUY-OPERATOR TRAINING-GEOMETRY CHECKS-SERVICE ONLY STUDER MACHINES WITH 40 YEARS STUDER EXPERIENCE. ***** 650MM CENTRE DISTANCE x 100MM HEIGHT, SWIVELLING TABLE AND WORKHEAD, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENS... more
5
saw blade diameter 450 mm cutting diameter 10-160 mm stroke 5-1200 mm feed stepless 0-18 mm/sec total power requirement 7 kW weight of the machine ca. 2 t dimensions of the machine ca. m Cutting lengths can be set from 5 to 1,200mm Sawblade feed, infinitely variable 0 - 18mm/sec Material feed speed 10 - 300mm/sec B2ov33oa Accessories / Special Features: - Built-in coolant equipment. - Infinitely variable settings of feeds, hydraulic. - Complete Covering more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Ncfgz VOORWOOD A 178 Shape and Sand Feed Trough -- Single sided, feed-through, profile shaper with sanding. Capacity: -- 5" x 5" min. part size, 1/8" - 1-1/2" max. thickness, 1-3/4" max. profile face; - LH (left hand) in-feed side Equipped with: -- (6) workstations: (2) 5 HP - 6,000 RPM shaping stations with 1-1/4" dia. x 2-3/8" long spindles, max. cutterhead dia. 6"; -- (4) 1 HP - 1,500 RPM Turbosand sanding stations, 1-1/4" dia. x 4" long spindl... more
12
Serial No. 50808719S Capacity Rounds 14"/ 355mm, Squares 14" x 14" / 355mm x 355mm Twin Pillar Yes Input 400/3/50 7.5 hp approx Speeds 50- 350 sfm Twin vices Yes Stroke of feed vice 24" / 609mm Multi Feed Yes Fitted with Coolant, Variable Downfeed, Bundle Clamp, and Swarf Screw B03z8sru Equipment 10' / 3048mm Roller Tracking Length Machine - 8' / 2438mm .Tracking 10' 2" / 3099mm Width Machine - 7' / 2133mm. Tracking 2' 8" / 813mm Height Machine 6' 6" / 1981mm. Tracking 3' 2" / 965mm Nett wei... more
1
cutting diameter 400 mm capacity 90 degrees: square 400 x 400 mm saw band length 5800 mm dimensions of saw-band 5800 x 38 x 1,3 mm feed length 600 mm cutting speed 18 - 90 m/min Lwbdj height of material-table 500 mm total power requirement 5,0 kW weight of the machine ca. 2,7 t range L-W-H 2,50 x 2,92 x 2,10 m acc.: chip conveyor, coolant more


automatic ...
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTOMATIC GRINDER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close