Automatic casemaker buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
15
Nfoqf Built in: 1992 Size: 355 x 700 mm Speed: 3.600 c/h more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcv8g39ghl FRIULMAC RANDOMAX EVO DEFECT SAW AND END MATCHER ALL IN ONE -- Automatic defect cutting and end matching machine with: -- 7-1/2 HP (5.5 kw) trim saw -- 1-1/2 HP (1.2 kw) scoring saws -- 8 HP (6 kw) profiling unitsCapacities: -- 8” (200mm) min. to 78” (2000mm) max. length -- 2” (50mm) min. to 15-3/4” (400mm) max. width -- 1/8” (10mm) min. to 1-1/2” (40mm) max. thickness -- Conveyor belt speeds from 30-... more
3
Panhans S45 3.2m Automatic Beamsaw with Tilting Saw Carriage - 2005 CE Cutting length 3200mm Cutting depth 3200mm Cutting height max 60mm at 90 degrees Cutting height max 40mm at 45 degrees Main saw motor 7.5kw 350mm dia main blade Saw carriage feed speed 0 - 40m/min variable Pusher fence variable speed 0 - 25m/min forward, 40m/min return Cutting height adjustment with 4 levels Mitre cutting from 0 to 45 degrees Bczupgru3f Pusher with 5 panel grippers and 2 stops Touchscreen con... more
5
saw blade diameter:400 mm cutting diameter:130 mm stroke:150 mm capacity 90 degrees: square:115 mm feeds hydraulic /stepless:0 - 1,5 m/min engine output:2,0 / 2,6 kW Bu2mipxl saw blade turning speeds:10 + 20 U/min total power requirement:12 A dimensions of the machine ca.:1,5 x 1,1 x 1,85 m weight of the machine ca.:1,1 t more
3

Automatic Punching Press Mubea Mubea VP600

Köln, GermanyGermany dealership location
6416 km
1994
used
pressure: t no. of strokes: Hub/min sheet width:1200 x 750 mm weight of the machine ca.: t :80 mm max. material thickness:20 mm min. material thickness:1,5 mm Gvyz7l2x8 Mubea plate punching machine with coordinate table and CNC control. more
3
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm work height max. 1050 mm turning speed range 205 - 3280 U/min rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, Uqvqibp7u with electrohydr. control acc.: variou... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ksjzyi3f UNIQUE 313 Automatic Shaper for Miter DoorsMiters the end of (2) cabinet door rails on each [...] & Features: -- Automatic cycle controlled by maintenance-free PLC software for accurate & easy alignment of mitered corners; -- (2) 5 HP Dual-motors for shaping with 1-1/4" spindles. -- (2) Pneumatic clamps hold workpiece on either side while parts are being shaped, unlimited part length. -- 1" Max. part thickness, 4" max. part width. - Staggere... more
4

Push Fed Automatic Upstroke Crosscut Stromab Matrix

Liverpool, United KingdomUnited Kingdom
5686 km
2004
good condition (used)
Stromab Matrix Push Fed Automatic Upstroke Crosscut - 2004 CE A robustly built range of upstroke crosscutting machines designed for programmable and repetitive cutting from lengths of standard or random length long timber. The saw unit has a pneumatic upstroke action and is fitted with a Matrix type pusher unit for automatic feeding Specification Saw Unit TR500 Self braking motor 10hp Saw blade diameter 500mm Max cutting width (refer to chart)360mm Max cutting height (refer ... more


automatic ...
daily

New machines via email!

Stay updated!
8

Tool Presetting Equipment ZOLLER VENTURION 450 PILOT 3 SEMI AUTOMATIC TOO

West Lothian EH54 9HW, United KingdomUnited Kingdom
5581 km
2014
good condition (used)
2014, s/n V4R4C300074, c/w – CNC Automation package, power spindle with auto focus, SK40 and HSK63 reducers/adaptors, manual Balluff System RFID chip system, Data output, Tool management system (Zoller TMS), CAM Interface Hmnn28lj more
1
turning diameter ca. 100 mm turning length 100 mm number of slides 2 spindle hollow 42 mm face slide travel 55 mm Uqvp8qkjt turning speed range max. 5000 U/min greates pass round over bed 240 mm feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
1

AUTOMATIC CNC SHAPER (SHAPE & SAND) UNIQUE 4500

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Etbidgf UNIQUE 4540 Shape and Sand (CNC) with (4) stations. -- General Description: (4) shaper heads of which (2) can be used for sanding. Ridged one-piece welded steel frame double spindle shaper (CNC controlled jump cope & cope) with two 45° tilting sanding stations. All heads are floating and displaced via rub collars making this machine suitable for shape and sand on pre-hogged arched raised panels. Jump cope on first shaper eliminates tear out o... more
4

Hacksaw - Automatic BEHRINGER Super A-200

Dreieich, GermanyGermany dealership location
6568 km
1982
used
cutting diameter 200 mm band length 350 mm cutting lenght max. 600 mm cutting range max. 180 x 180 mm dimensions of saw-blade 350 x 35 x 2 mm no. of strokes 52/66/81/104/132/162 Hub/min coolant voltage 380 V total power requirement 3,0 kW Dkdve9sp8 weight of the machine ca. 470 kg more
2

Horizontal Bandsaws EVERISING 300HB Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Gtoxmyxr more

Soag 6 Position Automatic Heavy Duty Drill

3AD, United KingdomUnited Kingdom dealership location
5845 km
1988
ready for operation (used)
Bcz9ydrr8a more
6
cutting diameter 260 mm saw band length 2660 mm cutting width 400 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 160 x 260 mm capacity 45 degrees: square 160 x 160 mm capacity 90 degrees: round 260 mm D8yb9qmp3 capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm material feed length 500 mm saw band feed 17-120 U/min dimensions of saw-band 2660 x 25 x 0,9 mm drive saw-band 1,5 kW drive hydraulic 0,25 kW total power requirement 1,75 kW weight of the mac... more
2

Band Saw - Automatic - Horizontal BTM 560 A

Bühl, GermanyGermany dealership location
6593 km
1999
used
cutting diameter 560 mm saw band length 8020 mm cutting width 1,1 mm capacity 90 degrees: round 560 mm capacity 90 degrees: square 560 x 560 mm dimensions of saw-band 8020 x 1,1 x 54 mm Uqvwqkgcj feed length 550 mm feed length: multiple 9999 mm cutting speed 17 - 127 m/min control CEB, SAW III total power requirement 7,5 kW weight of the machine ca. 7,6 t range L-W-H 4,30 x 2,40 x 2,56 m acc.: roller track 3000 mm, roller track 1800 mm, roller track 850 mm, chip converyor, coolant more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvrq9odi US CONCEPT CHB-12 Hauncher/Notcher;The US CONCEPTS CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with & Spec's: -- 40 MM horizontal spindle that moves up hydraulically past the table with the clampe... more
4
cutting diameter 250 mm saw band length 3010 mm cutting width 330 mm dimensions of saw-band 3010 x 27 x 09 mm cutting speed 35 / 75 m/min mitter cutting 45 ° power capacity 1,5 kW coolant 3gtisvayf voltage 400 V total power requirement 2,2 kW weight of the machine ca. 700 kg dimensions of the machine ca. 2,60 x 1,75 x 1,70 m - Fab. No.: 0003000633 more
15

Horizontal Bandsaws HYD-MECH H10A 10" / 254mm Twin Pillar Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. HSA0307115 Capacity Rounds 10"/ 254mm Squares 10" x 10" / 254mm x 254mm Twin Pillar Yes Input 415/3/50 5hp approx Zi8lntk Speeds 50-350 sfm Twin vices Yes Stroke of feed vice 24" / 609mm Multi Feed Yes Fitted with Coolant, Variable Downfeed, Bundle Clamp and Swarf Screw. Equipment 10' / 3048mm Roller Tracking Length Machine - 7' / 2133mm. Tracking - 10' / 3048mm Width Machine - 7' / 2133mm. Tracking - 2' 10" 863mm Height Machine - 5' 10" / 1778mm. Tracking - 2' 8" / 813mm Nett we... more
5
total power requirement:4,2 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:1,5 x 2,5 x 2 m saw band length:4400 mm cutting speed:15 - 150 m/min work height max.:750 mm capacity 45 degrees: round:rechts 330 mm capacity 45 degrees: flat:rechts 320 x 335 mm capacity 45 degrees: flat:links 305 x 335 mm capacity 45 degrees: round:links 305 mm capacity 90 degrees: flat:500 x 335 mm capacity 90 degrees: round:335 mm cutting range 30° flat:rechts 170 x 335 mm Cutting area at 30 ° round... more
6

Bar Automatic Lathe - Multi Spindle TRAUB TB 42

More Traub Tb 42
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1970
used
number of spindles - spindle passage - mm turning length - mm Hp0w7obwc Accessories: Cross drilling unit, revolver quick drilling unit, curve etching more
2

Hacksaw - Automatic KASTO PSB 260 AU

Bühl, GermanyGermany dealership location
6593 km
1982
used
cutting diameter 240 mm band length 450 mm cutting lenght max. 750 mm cutting range - square - 240 x 240 mm cutting range - flat - 260 x 180 mm Izdymdh dimensions of saw-blade 450 x 40 x 2 mm total power requirement 3,7 kW weight of the machine ca. 1,1 t - partly overhauled - acc.: 1 sawframe as spare part, various saw blades, coolant more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Waumrc3 UNIQUE 4522C CNC Shape and Sand Machine;All CNC Controlled Shaping & Sanding Operation. Ridged one piece welded steel frame double spindle shaper (CNC controlled jump cope & cope) with two 45° tilting sanding [...] heads are floating heads making this machine suitable for shape and sand on pre-hogged arched raised panels. Jump cope on first shaper eliminates tear out of end [...] Specs: -- Shapers: (2) 10 HP Direct drive variable speed floating shap... more
6
cutting diameter 305 mm saw band length 5620 mm cutting width 305 x 380 mm cutting speed stufenlos 16-90 m/min total power requirement 7,2 kW single feed stroke 10-510 mm multiple stroke until 4590 mm main drive 5,5 kW hydraulic motor 1,5 kW coolant pump 0,12 kW dimensions of saw-band 5620 x 34 x 1,1 mm weight of the machine ca. 3,1 t Qmo9zdlkm dimensions of the machine ca. 2,2 x 3,1 x 1,80 m Condition: good Electric 380 Volt CNC-control Cooling equipment Diverse sawbands Roller con... more
9

Automatic cold saw SIMEC MEC 120BM 1LCN

Haaksbergen, NetherlandsNetherlands
6345 km
2004
ready for operation (used)
SIMEC MEC 120BM 1LCN Automatic cold saw for high volume production cutting Ccskufx Blade diameter: 250 / 350 mm Angle range: +/- 60 degrees min. cut capacity : 12 mm round cut capacity : max 100 mm Max cut Lenth 3000 mm Feeder 6000 mm plus more
6

Automatic Punching Press IMS PHY 45

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2000
used
pressure 45 t no. of strokes 27/13 Hub/min sheet width - mm weight of the machine ca. - t Bctbcvrco2 more
4

Bar Automatic Lathe - Single Spindle INDEX C29

More Index C 29
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1976
used
spindle passage - mm turning length - mm bore depth - mm Bcy8m3o9kd Accessories: Turning sets, various tool holders, collets, feed pliers more
3
cutting diameter 500 mm Uqvtq8nz9 capacity 90 degrees: square 500 x 500 mm saw band length 6900 mm dimensions of saw-band 6900 x 38 x 1,3 mm feed length 600 mm feed length: multiple bis 5999 mm cutting speed 18 - 90 m/min height of material-table 700 mm total power requirement 5,0 kW weight of the machine ca. 4,0 t dimensions of the machine ca. 3,70 x 2,30 x 2,20 m Accessories: coolant - 2-column-guided - more
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Hvmispp PROFILEMATIC Model FT-2 is a Single sided, double head, feed through shaper with floating heads. -- Single post with (2) 7.5 HP belt driven stackable arbors, both heads are air loaded with in and out movement on THK bearings, both arbors are motorized with LED readout for vertical positioning. -- 6" Wide-feed track with top and bottom rubber padded chain tops, both inverter driven with single control. -- Manual thickness opening of over-hea... more
4
turning diameter over bed 125 mm spindle passage 10 mm turning length 100 mm turning speed range 1000 - 10000 U/min Boring depth max. 70 mm speed control shaft 0,20 - 284 U/min total power requirement 5,00 kW weight of the machine ca. 2,50 t dimensions of the machine ca. 6,00 x 1,50 x H2,00 m F7jrsj2 Bar feeder IEMCA CS112/42/CT more
9
Main spindle Max. Turning Diameter 16 mm Max. Headstock stroke 310 mm Max. Drilling capacity stationary Tool 8 mm Max. Tapping capacity stationary Tool M8 Spindle speed 500-10000 rpm Main spindle motor 3.7 kW, Continous 2.2 kW Main spindle bore Dia. 20 mm Max. Turning federate X, Z-axis 6000 mm/min Rapid feed rate X=12000 mm/min, Z=16000 mm/min Tool post 9 Tools, 12 mm x 95-115 mm Endworking attachment 3 Tools Sub spindle Spindle speed 400 -6000 U/min Spindle motor... more
5
Automatical capsule filling machines SPT-FS50 Series (produced in S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to 5 (optional #000,5). The ma... more
5

Band Saw - Automatic - Horizontal KASTO Twin A4

St. Ingbert, GermanyGermany dealership location
6503 km
2000
used
cutting diameter:400 mm saw band length: mm cutting width: mm speed:20 - 110 m/min capacity 90 degrees: square:400 x 400 mm capacity 90 degrees: round:400 mm capacity 90 degrees: flat:400 mm length:1290 mm width:2490 mm height:Oberteil in Höchststellung 1911 mm adjustment of height - one roll:Oberteil abgesenkt 1721 mm Hqieclhdc motor capacity:4 KW dimensions of saw-band:5090 x 41 x 1.3 mm total power requirement:7 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:2,74 x 2,18 x ... more
1
cutting diameter 400 mm capacity 90 degrees: square 400 x 400 mm saw band length 5800 mm dimensions of saw-band 5800 x 38 x 1,3 mm feed length 600 mm cutting speed 18 - 90 m/min height of material-table 500 mm total power requirement 5,0 kW weight of the machine ca. 2,7 t Lwbdj range L-W-H 2,50 x 2,92 x 2,10 m acc.: chip conveyor, coolant more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Ncfgz VOORWOOD A 178 Shape and Sand Feed Trough -- Single sided, feed-through, profile shaper with sanding. Capacity: -- 5" x 5" min. part size, 1/8" - 1-1/2" max. thickness, 1-3/4" max. profile face; - LH (left hand) in-feed side Equipped with: -- (6) workstations: (2) 5 HP - 6,000 RPM shaping stations with 1-1/4" dia. x 2-3/8" long spindles, max. cutterhead dia. 6"; -- (4) 1 HP - 1,500 RPM Turbosand sanding stations, 1-1/4" dia. x 4" long spindl... more
5
saw blade diameter 450 mm cutting diameter 10-160 mm stroke 5-1200 mm feed stepless 0-18 mm/sec total power requirement 7 kW weight of the machine ca. 2 t dimensions of the machine ca. m B2ov33oa Cutting lengths can be set from 5 to 1,200mm Sawblade feed, infinitely variable 0 - 18mm/sec Material feed speed 10 - 300mm/sec Accessories / Special Features: - Built-in coolant equipment. - Infinitely variable settings of feeds, hydraulic. - Complete Covering more
3
Double sided machine Number of units each side: Ughlpgrqn 3 x horizontal 4 x vertical more
1

Horizontal Bandsaws BEKA-MAK BMSO 280 280mm Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
2007
ready for operation (used)
Serial No. 708080 Capacity 280 mm Nedv2 Input 400/3/50 2.2 kW Speeds 20 - 100 m/min Fitted with roller type feed vice, 500mm length stop. Length 1.8 m Width 1.05 m Height 1.25 m Nett weight actual. 650 Kgs / 0.64 Tons more
2
cutting diameter 350 mm saw band length 3900 mm cutting width 0,9 mm cutting range - flat - 395 x 240 mm 77rtl8jef dimensions of saw-band 3900 x 25 x 0,9 mm total power requirement 1,75 kW weight of the machine ca. 0,6 t dimensions of machine 2,05 x 1,78 x 1,5 m - with feed rolls - - with mitre cutting - Accessories: roller track 4000 mm, length stop with end switch for cutting lengths up to 1600 mm, coolant more
1
Elect./Voltage: 208/480 V, 60 Cy, 3 Ph Gvky2o UNIQUE 2700 CNC CNC Door ShaperCNC Controlled Machining Center for Raised Panel [...] with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK [...]: --... more
2

Semi-automatic seaming machine for cans Indosa MP 160

Wehr, GermanyGermany dealership location
6632 km
2007
ready for operation (used)
Semi-automatic sealing machine Indosa MP 160 for preserve tin and composite cans Output: up to 600 cans/h Diameter of can Ø: 40 - 160 mm Hight of cans: 20 - 220 (280) mm Compressed air: 5 bar Bcweojb0ai Weight: approx. 35 kg Dimensions (WxDxH): 660 x 350 x 550 mm Elekt.supply: 0,3 kW Semi-automatic seaming machine Indosa MP 160 is suitable for filling and closing of preserve, tin and composite cans; This machine is mainly made of stainless steel and anodized hard aluminium and ... more
6
Tp3vfoycj Max. length: 1400 mm Max. diameter: 250 mm Hopper feed at the rear Reproductive tracer (tamplate or real modell) 2 front units and 3 jump-in knife tools on top more
1

Horizontal Bandsaws MEGA BS300HAS 300mm Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
1998
ready for operation (used)
Serial No. 980419 Capacity Rounds 330 mm, Squares 300 mm, Rectangular 350 x 250 mm Input 400/3/50 3.7 kw Speeds 25 - 80 m/min Vice opens 400 mm Twin vices yes Stroke of feed vice 500 mm Multi Feed yes Bciev7pej0 Fitted with Bundle clamps, swarf screw and coolant Length 7' Width 6' 4" Height 4' 4" Nett weight actual. 1,400 Kgs / 1.38 Tons more
5

Band Saw - Automatic KASTO - AUTOMAT HBA 420 AU

Karlsbad, GermanyGermany dealership location
6611 km
1993
used
weight of the machine ca.:3360 kg sawing motor:5,5 kW total power requirement:8 kW dimensions of the machine ca.:3,34 x 2,43 x 2,36 m Nfnvt cutting speed:20 - 130 m/min cutting diameter:420 (quad. 420 x 420) mm saw band length:6300 x 38 x 1,3 mm feed length:max. 1x: 600 - 9x: 5.400 mm cutting length min.:6 mm diameter min.:10 mm Bandsaw automatic, min. offcut (single step): 10mm, min offcut (automatic mode): 80mm, roller track 2000mm, chip removal brush, bundle sawing device, max. passage 480... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Nccxn UNIQUE 2700 CNC CNC Door ShaperCNC controlled maching center for Raised Panel [...] with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK [...]: -- Wind... more


automatic ...
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTOMATIC CASEMAKER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close