2 die buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ibjxsrp DIEHL VS 81 Tapeless Veneer Splicer; Handles stock from 1/64" thick & 6" min. length up to 42" wide, 14 - 75 stitches/[...]: -- 1.5 HP Variable speed feed motor, 15 - 85 FPM, 42" throat, 100" x 75" table. -- Manual raise and lower temperature controls (200 - 500°) for heater bars. -- This machine was overhauled in 2012, and is ready for your production needs. more
11
For Sale is a very nice Diesel Fork Lift, fully functional STILL R70-30 DIESEL Fork Lift 3000kg Load capacity with TRIPLEX MAST! The forklift is built in 1994 but has only 6409 hours on the clock, which is not much for such a device. The truck is visually and technically in perfect condition. Service has just been carried out including all oils and filters. The truck is equipped with a triplex mast with full free lift. The unit has 4 hydraulic circuits, allowing an additional attachm... more
5

Frontstapler LINDE H 30D, Dieselmotor, Tragkraft 3000 kg

St. Peter in der Au, AustriaAustria dealership location
7051 km
ready for operation (used)
3.700 €
Offer
Another 7 days
Nf9bh more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Csrzhafq Tapeless Veneer Splicer; 1.5 HP TEFC variable speed feed motor, 15 - 85 FPM feed speed; handles stock from 1/64" thick and 6" min. length up to 42" wide. -- Equipped with: 4-Roll infeed matching roll assembly, thermostatic controls for upper-and-lower heater bars (200° - 500° F temperature range). -- Complete with: Automatic oil mist lubrication; outfeed with powered take away roll for veneer, start/stop push buttons for feed motor, and over... more
9
Totally revised in 2017 Mugaa8 Sacma Model SP25 4D Progressive Header, Serial No. 39AN79, Built 1977 Specifications: Cutoff Diameter - 12mm Blank Length - 100mm Cutoff Length - 130mm 125 Pieces Per Minute Equipped with: Bushing Cutoff, PKO and Straight Across Transfer with Finger Opening Cam Electrical Equipment and Controls: AC Motor and Controls Weight - 10 tonnes Machine can be seen in use. more


2 die
daily

New machines via email!

Stay updated!
11
For Sale is a very nice Diesel Fork Lift, fully functional STILL R70-30 DIESEL Fork Lift 3000kg Load capacity with TRIPLEX MAST! The forklift is built in 1994 but has only 6409 hours on the clock, which is not much for such a device. The truck is visually and technically in perfect condition. Service has just been carried out including all oils and filters. The truck is equipped with a triplex mast with full free lift. The unit has 4 hydraulic circuits, allowing an additional attachm... more
2

ERODIERBOHRMASCHINE WALDMANN & WEIGL ER 230 S

Bruchsal-Büchenau, GermanyGermany
6601 km
1994
excellent (used)
ERODIERBOHRMASCHINE WALDMANN & WEIGL EROMOBIL ER 230 S - 06-01-008 Lieferzeit: sofort Nummer: 06-01-008 Hersteller: Waldmann & Weigl Typ: Eromobil ER 230 S MASCHINENDATEN Baujahr: ca. 1994 L x B x H: ca. 1200 x 800 x 1600 mm Gewicht: ca. 150 kg Sehr Guter Allgemeinzustand Geeignet zum: Entfernen von abgebrochenen Gewinde & Spiralbohrern aus HSS sowie HM mit geeigneten Elektroden TECHNISCHE DATEN ERODIERBOHRMASCHINE Spiralbohrer Ø: ca. Ø 1 - 16 mm Bcwe92xf8d Gewindeb... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ncdjr DIEHL 205 Through Feed Moulder (5) Heads -- 5-Head (B-R-L-T-B), working cap. of 8" x 4-3/4" . -- Head Configuration Spindle motors: Bottom 15 HP, right/left 20 HP, top 15 HP and bottom 15 HP. --Specifications: Spindle dia. 1-13/16" with cutterhead speed of 6,000 RPM; mechanical spindle adjustments for all spindles. -- Feed speed from 20 - 120 FPM with 10 HP motor, variable speed Cardan drive. more
1

5 die - 5 blow transfer header HATEBUR AKP 4-5

Norderstedt, GermanyGermany dealership location
6479 km
1978
used
bushing cut-off diameter range 20 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 125 mm shaft length under head 125 mm output - pieces/min 160 Srvwt8 press power 170 to more
1
Cargo space capacity: 2.400 l Bbxeg3k0o3 Field of application: Construction EPA marked Transport dimensions (LxWxH): 2.49x1.19x1.5 more
3

Die-cutting machine Boschert PL 150 CNC Z

Nürtingen, GermanyGermany dealership location
6677 km
1997
good (used)
Die-cutting machine Manufacturer: Boschert Type: PL 150 CNC Z Year of construction: 1997 8vsnpwxd3 Working range: 750 x 1500 mm Projection: 750 mm Sheet thickness: 10 mm Sheet length: 3000 mm Sheet width: 1500 mm Stroke length: 0-40 mm Piston stroke: 16 mm Punching diameter: 105 mm Maximum pressure: 25 t Total power consumption: 4,0 kW .. more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbutsaejqi DIEHL 750 Straight Line Rip Saw; 15 HP - 3,450 Direct drive arbor motor, 2" dia. arbor, 18" blade [...]: -- 4" Max. depth of cut, 12" min. part length, 21-1/2" width of table to the right of blade & 37" to the left. -- Twin chain drive, automatic dip lubrication. -- Top pressure system with (4) segmented rollers & (2) split rollers over blade. Complete with & Features: -- Rip fence, set of anti-kickback fingers, push buttons, main disconne... more
1

2 die - 3 blow transfer header HILGELAND CF5AZ

Norderstedt, GermanyGermany dealership location
6479 km
1979
used
bushing cut-off diameter range 8-16 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 160 mm shaft length under head 130 mm Ucrk7sven output - pieces/min 100 more
1
Complete assortment of well-preserved stamps and dies in the same number and diameter as in the illustrated brochure. Gfqjk0wzm more
6
Cargo space capacity: 3.000 l Field of application: Construction Brand New Fuel Tank 3.000 Liter EPA marked Transport dimensions (LxWxH): 2.43x1.2x1.81 Bbxdgwl02q more
1

DIETRICH REIMEL GMA 10,0

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Bczy2slow3 more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcyjx29a3z DIEHL SL 52 Straight Line Rip Saw:Specifications: -- 15 HP - 3,600 RPM Direct Drive bottom mounted arbor motor. -- 2" Dia. arbor, 18" max. blade cap., blade included, 4-1/4" max. depth of cut, 10" min. part [...]: -- 25" Throat capacity (width of table to the right of blade), & 36" to the left, 82" L x 64" W [...]: Variable feed speed from 55 - 190 FPM, 3 HP feed drive, split chain drive, automatic chain lubrication. -- Top pressure system... more
1

5 die - 5 blow transfer header SAKAMURA BPF540

Norderstedt, GermanyGermany dealership location
6479 km
1992
used
bushing cut-off diameter range 23 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm Jfb3gfx shaft length under head 130 mm output - pieces/min 120 press power 220 to more
6

Punches and dies Mubea / Peddinghaus

Gütersloh, GermanyGermany dealership location
6463 km
good (used)
The illustrated Mubea and Peddinghaus tools are not sold completely. Eelzltm You can tell us which stamps and matrices you need, so we can compile an individual assortment for you. more
1
Cargo space capacity: 300 l Field of application: Construction Bbxegszu02 EPA marked EPA marked Transport dimensions (LxWxH): 1.14x0.65x0.98 more
5

Diesel engine Volvo TD50B

Hengelo, NetherlandsNetherlands
6346 km
excellent (used)
Good running used Volvo engine (diesel) type TD50B Bcz2saaoh8 We have a wide range of new and used engines in stock. Please do not hesitate to contact us for pricing or availability. more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Hjwguensw DIEHL SL-52 Straight Line Rip Saw Left Hand (rebuilt and suitable for a glue joint accuracy); 15 HP Motor, 3,600 RPM belt driven, fixed 2" [...] -- 14" to 18" Blade diameter. -- 4-1/4"" max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed 65 to 190 FPM. -- 48" throat capacity (width of table to the right of blade --25" width of table right of saw --35" working height --36-5/16 width of table to... more
1

2 die - 2 blow transfer header OMEGA 122CL

Norderstedt, GermanyGermany dealership location
6479 km
1989
used
bushing cut-off Bmi20y7s diameter range 8,5 mm number of dies 2 number of stations (incl. cut off) 3 cutting length 100 mm shaft length under head 80 mm output - pieces/min 300 press power 30 t more
2

DE DIETRICH

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Bczpr2e0lv more
1
Cargo space capacity: 600 l Field of application: Construction EPA marked EPA marked Transport dimensions (LxWxH): 1.36x1.19x1.09 Goaqtyxg0 more
5

Diesel engine Deutz F3L1011F

Hengelo, NetherlandsNetherlands
6346 km
excellent (used)
Good running used Deutz engine (diesel) type F3L1011F 31 kW at 3000 rpm H7i2mfl2 We have a wide range of new and used engines in stock. Please do not hesitate to contact us for pricing or availability. more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Hgh8bc0aw DIEHL ESL 25-ll STRAIGHT LINE RIP SAW;Specifications: -- 15 HP Motor - 4,300 RPM belt driven fixed arbor. -- 16" max. blade diameter. -- 2-1/2" max. thickness. -- 15 HP Main Motor. -- 1.5 HP - 1,800 RPM feed drive. -- Feed speeds from 50-140 [...] information: -- 19" throat depth to right of blade. -- 19" of table to left of blade. -- 56" long table. -- 34" working height. Complete With: -- Cast iron pressure bar arms with ball bearing... more
1

2 die - 3 blow transfer header OMEGA 123

Norderstedt, GermanyGermany dealership location
6479 km
1988
used
bushing cut-off diameter range 8,5 mm S2cr80rt number of dies 2 number of stations (incl. cut off) 4 cutting length 100 mm shaft length under head 75 mm output - pieces/min 250 press power 30 t more
9
A very well-maintained LINDE H35D Diesel 3500kg Forklift. Forklift is built in 2007 but has only 9132 hours on the clock, which is not much for such a device. The truck is visually and technically in perfect condition. The device has just been tested and overhauled by a Linde dealer. Service was carried out including all oils and filters. Chain exchanged, hydraulic hoses new. Timing belt, water pump, pulleys changed !!! Particle Filter tested. Rear axle / steering axle completely overhaul... more
12

SENKERODIERMASCHINE AGIE EMS 2 - 20

Bruchsal-Büchenau, GermanyGermany
6601 km
1987
excellent (used)
SENKERODIERMASCHINE AGIE EMS 2 - 20 - 06-01-011 Lieferzeit: sofort Nummer: 06-01-011 Bcvvjdhs7m Hersteller: AGIE Typ: EMS 2 - 20 MASCHINENDATEN Baujahr: ca. 1987 L x B x H: ca. 1800 x 1800 x 2000 mm Gewicht: ca. 800 kg Sehr Guter Allgemeinzustand TECHNISCHE DATEN Digitalanzeige: 3 - Achsen (Memo 212) 3 R - Rotationsspindel: ca. 0 - 200 mm Elektrodenaufnahme: ca. Ø 20 mm Verfahrwege: X - Achse: ca. 320 mm Y - Achse: ca. 220 mm Z - Achse: ca. 385 mm Max. W... more
5

Diesel engine Perkins AR70436U

Hengelo, NetherlandsNetherlands
6346 km
excellent (used)
Good running used Perkins engine (diesel) type AR70436U 64 kW at 2400 rpm We have a wide range of new and used engines in stock. 2ra89y Please do not hesitate to contact us for pricing or availability. more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Glp2xsgig DIEHL Model 750 Straight Line Rip Saw;Specifications: -- 15 HP with Baldor Motor Brake - 3,600 Direct drive arbor motor. -- 2" Dia. arbor, 18" blade cap., 4" max. depth of cut. -- 12" Min. part length. -- 80" x 64" Table with 35" working height. -- 21-1/2" Width of table to the right of blade & 37" to the [...] Motor, Variable-rating ... -- 1 HP (581 RPM) 10.3 Amps -- 1.5 HP (880 RPM) 9.3 Amps -- 2 HP (1,170 RPM) 7.4 Amps -... more
1

2 die - 3 blow transfer header ASAHI OKUMA ORH120

Norderstedt, GermanyGermany dealership location
6479 km
1988
used
bushing cut-off diameter range 14 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 100 mm shaft length under head 90 mm Fh3x28t output - pieces/min 100 more
10
For Sale is a very nice Nissan D50Q diesel forklift from year of construction 2008 with only 10021 original working hours. Ncu9p Device was checked / overhauled by the dealer. Hydraulic sealing, engine very good. Double tires front. Rip well with spikes even in winter. The device is in a very good maintenance condition. Customer service. No repair traffic. Very maintenance friendly device because purely mechanical. This is the very reliable Mitsubishi 6 cylinder diesel engine with... more
9
Travel: X 5750, Y 790, Z 360 Table: 3000 x 800m, min./max. Distance spindle nose - table: 800 / 1100mm Laf2qhsx Max. Workpiece weight: 15000kg CNC Heidenhain TNC426CB, retrofitted 1997 Feed motors: Siemens AC, rapid traverse 6m/min Milling motor: Siemens AC 15kW; Spindle Ø in the front bearing: 130mm quill-Ø: 210mm, 18 manually shiftable gear stages, 18 speeds from 20-1600 rpm hydraulic tool clamping taper 50 DIN 69871 Weight: 32000kg Heidenhain linear scales more
5

Diesel engine Deutz TCD2012L042VM

Hengelo, NetherlandsNetherlands
6346 km
repair required (used)
Used revision needed Deutz engine (diesel) type TCD2012L042VM 83 kW at 2300 rpm We have a wide range of new and used engines in stock. Bcz2ptxbhw Please do not hesitate to contact us for pricing or availability. more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. B3tpsmd DIEHL SL-52 Straight Line Rip Saw Left Hand; Specifications: -- 15 HP Motor, 3,600 RPM belt driven, fixed 2" arbor. -- 14" to 18" Blade diameter. -- 4-1/4"" max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed 65 to 190 FPM. -- 25" Throat depth to right of blade, 24" of table to left of blade. --Table size 61" x 80".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers... more
1

4 die - 4 blow transfer header PELTZER-EHLERS GB1

Norderstedt, GermanyGermany dealership location
6479 km
1970
used
diameter range 12 mm number of dies 4 number of stations 5 cutting length 100 mm Uvrbrgxlr shaft length under head 80 mm output - pieces/min 125 press power 65 to more


2 die
daily

New machines via email!

Stay updated!

to

to

Edit search
2 DIE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close