Multi-Spindle Turning Machine

MORI SEIKI NZ2000

Condition: like new (used), Year of construction: 2009, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NZ 2000 T2Y. * APPROXIMATE VALUE OF INCLUDED EQUIPMENT: €40,000–45,000. * Both spindles equipped with two Hainbuch high-precision collet chucks. * Opposed-spindle machine configuration. * 9-axis turning and milling center with CNC control. * Twin spindles. * Spindle size: A2-6. * 2 stacked turrets. * 2 C-axes. * 1 Y-axis. * Two integrated 22 kW motors. * Milling spindle power: 7.5 kW. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic load control and tool consumption monitoring. * Tool life management and consumption monitoring. * Double foot pedal for chuck open/close operation. * Oil chiller for both spindles. * Cutting torque: 340 Nm. * Both turrets feature 16 stations each, all stations driven. * Possibility to set up with up to 32 tools per turret. * Interface for bar feeder installation. * Rear automatic parts catcher with special gripper for long workpieces. * Large set of external and internal toolholders. * Large assortment of axial and radial driven tool blocks. * MQ tool clamping system. * Maximum turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III CNC control. * Maximum distance between main and sub-spindle: 1,130 mm. * Main spindle speed: 5,000 rpm. * Sub-spindle speed: 5,000 rpm. * Driven tool speed: 6,000 rpm. * Maximum bar capacity: 65 mm. * X1 travel: 210 mm. * Y1 travel: +65 / -45 mm. * Z1 travel: 300 mm. * X2 travel: 210 mm. * Z2 travel: 810 mm. * Sub-spindle travel: 920 mm. * Rapid traverse X1, X2: 30,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 50,000 mm/min. * C-axis resolution: 0.001°. * Hinged belt side chip conveyor. * Communication ports: USB, PCMCIA card, RS232. * Machine weight: 8,300 kg. * Inspections under power possible. Dedpfx Abox Ab Nio Tsla * Supplied with electrical transformer, documentation, parts list, electrical diagrams, programming and operation manuals. * IMPORTANT: Never used with bar feeder; only used for machining aluminum prototypes. * VERY few cutting hours. * Immediate delivery unless sold prior.

Year of construction: 2008, condition: refurbished (used), Oscillating base: 800mm Oscillating cross slide: 800mm Maximum distance between large spindle noses: 1,130mm Maximum machining diameter: 320mm Maximum turning length: 810mm Bar machining capacity: 52mm Dedpfexuguuox Ab Tela X1, X2 axis: 210mm Y1 axis: 110mm (+65, -45) Y2 axis: 110mm (+45, -65) Z1, Z2 Axis: 810mm B-axis (spindle 2): 920mm CNC control: MSX-701 III Spindle 1, 2 Max. spindle speed 1, 2: 6,000 1/min Spindle nose 1, 2: JIS A2-5 Bore diameter through spindle 1, 2: 61mm Turret type: 16 stations x 2 Max. tool spindle speed motorised: 6,000 1/min Speed x1, x2: 30,000 Speed y1: 20,000 Speed z1, z2: 50,000

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Dedpsv E R E Njfx Ab Tola Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Dedpfx Abswlvlgj Tsla Year of manufacturing: 2010

Condition: used, functionality: fully functional, 1 piece used CNC lathe Mori Seiki NZ 2000 with C-axis and driven tools. Further technical data and photos will be added. Dlodpfxjxb T Uzo Ab Toa