Used Nagel Vs 8 – 50 / S for sale (97,500)

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Dsdpfx Ahjzb Dfxo Ijkn Spindle rotation: 3 HP Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: used, machine/vehicle number: 3254, used honing machine make NAGEL type VS 8 - 35 max. stroke = 350 mm throat = 250 mm Distance table - spindle = 800 mm Djdpfjkt Nnvsx Ah Ijkn Bore diameter = 24 - 150 mm

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Dkjdpfjxwdxiox Ah Isn Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1981, workpiece length 1500 mm Dksdpfx Ahet Hwpmo Isn stroke 0 mm swing dia. 500 mm total power requirement 30 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2006, operating hours: 3,065 h, load capacity: 5,000 kg, lifting height: 3,180 mm, fuel type: electric, mast type: duplex, construction height: 2,375 mm, mileage: 3,065 km, Electric duplex forklift Brand: Still (Germany) Year of manufacture: 2006 Capacity: 5,000 kg Lifting height: 3,180 mm Clearance height: 2,375 mm Equipped with: sideshift Equipped with THIRD VALVE ONLY 3,065 operating hours Battery from 2019 automatic filling system with external charger Djdpfxjy Iwmko Ah Iekn

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t Dsdpfxjfu Nbbs Ah Ijkn dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: reconditioned (used), Year of construction: 2004, Nagel inspector for base, mouth, and residual liquid inspection, configured for 0.33 l longneck bottles (other formats possible), completely overhauled, available at short notice due to a cancelled order. Dsdpfsyc Tm Iex Ah Ijkn

Condition: used, machine/vehicle number: 4686, Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dodpjh Ax D Ssfx Ah Iekn

Year of construction: 2015, condition: ready for operation (used), There are three identical superfinish machines Nagel available, connected load: 11kW, controls: SIEMENS SIMATIC HMI, length: 2565mm, width: 2600mm, height: 2663mm, operational hours counter: 34,051h, year of construction: 2x 2015, 1x 2014, with documentation, there are additionally two automations Promot available. Dksdpfok S Ehkjx Ah Ien

Condition: ready for operation (used), Perske VS 40.09-2 VDE 0530 spindle motor 11,500 rpm, 133V~, 7.3A, 1.0 kW, 200Hz. Serial number: 880174, used, in good condition, 100% functional, scope of delivery as per photos. Dedpfx Aswyrd Ioh Iskn

Condition: ready for operation (used), Step-Tec HVCS230-S-20-1.2/15-3FD-HSK-A63 high-speed spindle Id. 6014.058.A.10e removed from Norte VS500 Speed, the thread on one of the connectors is damaged, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Djdpfeul Ipnox Ah Iekn

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Dkjdsxk Tg Njpfx Ah Isn Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: ready for operation (used), Belt Filter, Pressure Filter, Emulsion Filter, Sludge Filter, Lubricant Filter, Emulsion Filter, Used Machine Manufacturer: Faudi Dimensions: 2460 x 1660 x 1270 mm Dodpfxjv D Hmaj Ah Ijkn Belt size: 2200 x 1270 mm Active filtering surface: 1400 x 1200 mm Capacity : 1200 l/m The Klappbandfilter is used for cleaning contaminated cooling and lubricating fluids in the metalworking field, as well as for processing various sludge waste during rough machining, especially aluminum, or for handling abrasive grinding sludge. When the cooling and lubricating fluids and grinding sludge are cleaned, they can be reused in the process for longer periods, significantly contributing to environmental protection. Additional benefits include heat dissipation at the machining site and optimization of the workpieces' surface quality. The Klappbandfilter is versatile and can also be used independently. Its modular design allows it to be optimally adapted to various conditions. The FAUDI design allows for the buildup and removal of filter cakes up to 15 cm thick. With the extra-high filter cake, the separation performance of the filter is further increased. Filter areas of 1, 1.5, and 2.5 m² per filter are possible. Filter fineness: Up to 10 µm Medium/Fluids: Oils and machining emulsions Filter auxiliaries: Optionally with or without filter auxiliaries

Year of construction: 2024, condition: new, functionality: fully functional, We offer this UK Exchangers Ltd UKE-8-4PV-8 - (50 kW) 8 Plates, Packaged Heat Exchanger, year of construction 2024. With Control Panel, Pump, Thermostat and ESBE Actuator This heat exchanger is new, not needed for the job but has been held in storage for a couple of years. As you can see from 1 of the photos the attached thermostat controller has a crack at the cable entry point. Dsdpfxezbrv Es Ah Iekn WRAS Approved Model type: UKE-8-4PV-8 Thermal capacity: 50 kW Number of plates: 8 Serial number: C-54778/1 Year of manufacture: 2024 Design pressure side 1: 10 bar g Design pressure side 2: 10 bar g Design temperature side 1: 99 °C Design temperature side 2: 85 °C Test pressure side 1: 15 bar g Test pressure side 2: 15 bar g Volume side 1: 1 L Volume side 2: 1 L If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: as good as new (ex-display), Year of construction: 2014, overall weight: 98 kg, total height: 4,950 mm, total width: 5,100 mm, total length: 7,300 mm, Vacuum dryer VS-50 C Internal dimensions (LxHxW) in mm: 405x340x370 Wattage: 230 V 50/60 Hz. 1.52 KW Additional shelf 1 pc. The machine is from 2014, but has never been used. Suitable for drying processes at temperatures up to 200°C with connection for a vacuum pump. The vacuum pump is not included. Further technical data can be found in the technical data sheet. A total of 3 shelves are available. Dsdpfxjqmm Npo Ah Iekn

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar Dksdpfx Aowhzmneh Ien control Schütze / Contactors weight of the machine ca. 650 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System BOSCH REXROTH - BFA 980-50Hz /S/20/8 - very good condition - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 1.7 kW, 2.3 HP, 2,890 rpm, 60 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, Andritz 13.7 kW, Used machine Manufacturer: Andritz Type: HP 50-180.1/2/S Electrical data: 400V; 27A; 13,7kW Flow rate: 42 m³/h Head: 80 m Djdowmb Ebopfx Ah Iokn Year of manufacture: 2013 Overall dimensions: Length: 380 mm Width: 350 mm Height: 1080 mm

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, Andritz 13,9 kW, Used machine Manufacturer: Andritz Type: HP 50-180.1/2/S.15/2 Electrical data: 400V; 27A; 15kW Flow rate: 42 m³/h Dkedpjv Dr Hfofx Ah Ion Head: 80 m Year of manufacture: 2015 Overall dimensions: Length: 380 mm Width: 350 mm Height: 1080 mm

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Dkjdpsru Un Hjfx Ah Ion Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 713/714, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller model: FANUC /SEIKOS 18Mi, spindle motor power: 8 W, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, HITACHI SEIKI Vertical Machining Center VS50, 3 axes X Y Z + 4th axis with 360,000 positions. Tool magazine: 20 SK40. Control: Fanuc / Seikos 18Mi. Dodpfsyzyc Iox Ah Ijkn

Condition: new, functionality: fully functional, power: 426.59 kW (580.00 HP), fuel type: diesel, fuel: diesel, brakes: intarder, color: grey, gearing type: automatic, suspension: air, Year of construction: 2025, Equipment: ABS, airbag, spoiler, Iveco Stralis S-Way 580 Limited Edition “50th Anniversary” New, to be registered - Full pneumatic suspension - Retarder: Intarder Dsdpfxsxvr Txe Ah Iskn - 0 km (delivery mileage) - Standstill air conditioning - Double bunk beds - Navigation system - Alloy wheels - Mirror cam CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30am / 7:00pm - SATURDAY 8:30am / 2:00pm WE OFFER A WIDE RANGE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – S 500 – S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated semi-trailer – Lamberet – Schmitz – Isuzu – Fixed body – Crane – Tipper – 4 axles – Rear 4 Axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain-side – Box – Tail lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl disclaims any liability for discrepancies in technical specifications, equipment, or features that may in some cases differ from the description reported. Please verify the characteristics of the specific vehicle.

Year of construction: 1990, condition: used, 2.tool turret heads make DUPLOMATIC year 90 Type:BSV-N250 8/20-110/50 Tool holder size VDI50 Tool stations 8 pockets. Center height: 125mm. Price per 1 piece. Dedpfjbaf Spox Ah Iskn

Condition: good (used), Year of construction: 2011, Temperature control unit, heating system, hot water boiler, hydronic system, hydraulic station for high-pressure cleaner, high-pressure pump -Temperature control units for: water -Electric heating for: pressure washers, high-pressure pumps -Manufacturer: Frigotrol -Type: S-TT 50/108-D -Power: 110 kW -Connection: -Permissible operating overpressure: 6 bar Djdpfx Asqw D Dpeh Iokn -Dimensions: 1548/890/H1630 mm -Weight: 380 kg

Condition: new, GMN / Schaudt TSE 70c - 25000/8 spindle SN 386347 8 - 8 - 6.5kW S 6-60% 350-350-350V, unused in opened original packaging, 100% functional, scope of delivery as per photos Dkodpsqfub Ajfx Ah Ien

Condition: new, GMN / Schaudt TSE 70c - 25000/8 spindle SN 371461 8 - 8 - 6.5kW S 6-60% 350-350V, unused in opened original packaging, 100% functional, scope of delivery as per photos Dkodpfeqfubxex Ah Ien