Used Weinig Raimann B110 S Resaw for sale (68,119)

Condition: excellent (used), Year of construction: 2015, Massive Parquete production line Manifacturer - MICHAEL WEINIG AG / GMC SERVICE Year - 2015/2007 Capacity - 800m2/ shift Max Width of Parquet- 200 mm Dedpfxoyzfr Uj Ah Ijkn Max length of Parquet - 2.400 mm Complete line for production normal solid parquet ! On this line it is possible to produce different dimensions at the same time ! Kind of parquet - Herringbone 90 , Chevron 45/60 Condition - Exellent

Condition: used, Used machine Year of manufacture: 2004 Equipment and technical data: - Operating hours: approx. 5000 Dkodpfx Aheyxyauj Ien - Planing width: 230 mm - Planing height: 120 mm - Number of spindles: 6 - Spindles at the bottom: 2 - Spindle on the right: 1 - Spindles on the left: 1 - Spindles at the top: 2 - Spindle arrangement: bottom / right / left / top / top / bottom - Motor power in kW: 11 / 7.5 / 7.5 / 11 / 11 / 11 - Maximum spindle speed: 6800 rpm - Spindle diameter: 40 mm - Feed rate: max. 30 m/min - Feed rate: infinitely variable - Feed rate: 4 kW - Main motor: 11 kW - Preliminary trimming cutter - Machine table surface: chrome-plated - Infeed table length: 2000 mm - Table rollers: driven - Lubricant pump: manual - Overpressure: pneumatic - Drive: feed rollers, cardan shaft - Total connection: 80 kW - Dimensions: 4100 x 2050 x 1900 mm Machine offered without tools; used tools can also be provided. Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air Dedpjzbypyefx Ah Iskn PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: ready for operation (used), Siemens 6FC5203-0AB11-0AA2 Flat panel OP031 Version C , serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Dkodpfei Edy Nex Ah Ion

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Type: Powermat 700 Year of manufacture: 2018 Number of spindles: 6 Planing width: 230 mm Planing height: 160 mm Spindle diameter: 40 mm Infeed table length: 2,500 mm Feed rate: 0 - 40 m/min Rollers in the table: 1 piece 200 mm and 1 piece 50 mm Control system: Memory plus Spindle arrangement: Djdpfjzcb Efjx Ah Iokn Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 15 kW Top: 15 kW Bottom: 11 kW

Condition: used, Year of construction: 2010, mileage: 1,081 km, power: 15 kW (20.39 HP), first registration: 04/2010, overall weight: 1,787 kg, fuel type: electric, color: red, axle configuration: 4x2, maximum load weight: 1,080 kg, empty load weight: 707 kg, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, * German vehicle * Condition see photos * Ideal for large halls, parking garages etc... * Original only 1081 operating hours * Ideal for operation in large halls, logistics and parking garages as no exhaust fumes due to electric drive * Compact high-performance scrubber-drier for wet scrubbing and dry vacuuming in one operation * Combination machine with additional sweeping system, with dust extraction. * Hako B1100 sweeping and scrubbing machine * Area performance max. theoretically up to 7,000 m2 /h * Wet cleaning unit * Working width of brush head 102 cm * Brush diameter (2 brushes) 53 cm * Brush speed 210 rpm * Brush motor (2 pieces) 2 x 700 W * Brush contact pressure up to 540 N * Suction foot (working width) 126 cm * Fresh/dirty water 185/185 liters * Sweeping suction device: * Working width 138 cm * Electrical equipment * Rated voltage 36 V Dkedpfxjvhqiyj Ah Ion * Drive battery 36 V/640 Ah5 PzS * Drive motor 2000 W * Travel speed up to 8.0 km/h * Sweeping suction ? Fine and coarse dirt are picked up cleanly in the dry area in front of the scrubbing unit. * Wet scrubbing ? Even the toughest incrustations are removed cleanly by the rotating disk brushes * Dry vacuuming ? The pendulum-suspended, parabolically shaped squeegee leaves the floor immediately dry and ready to walk and drive on * Large tank capacity ? Long working times and short set-up times thanks to the flexible wall between the fresh and dirty water areas. * Dirt/water treatment system for multiple use of the water used for cleaning. ? Consistent cleaning quality in conjunction with the detergent dosing system. ? Enormous reduction in set-up times and water consumption. ? Optional use of fresh water or treated waste water. The fresh water tank always remains clean If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm # 2809 Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw Djdpfextvgkex Ah Iokn ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: excellent (used), CATALOG NUMBER 6674 TECHNICAL SPECIFICATIONS - Max planing width: 150 mm - Max planing height: 130 mm 7 spindles: 1) bottom horizontal, 150 mm, 3 kW 2) right vertical, 130 mm, 3 kW 3) left vertical, 130 mm, 4 kW 4) top horizontal, 150 mm, 4 kW 5) bottom horizontal, 150 mm, 3 kW 6) right vertical, 130 mm, 4 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable up/down and right/left - 4 driven toothed feed rollers from above - 4 top rubber outfeed feed rollers Dsdpfeza Eccsx Ah Iokn - 2 top pressure rollers - Electric planing thickness adjustment: 0.25 kW - Infeed table length: 1970 mm - Central table lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Extraction port diameters: 6x120 mm - Dimensions (LxWxH): 4000x1300x1600 mm - Weight: approx. 3000 kg – German manufacture – 6-head machine – Used moulder/planer in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price based on 4.2 PLN/EUR exchange rate (Significant currency fluctuations may cause price adjustments)

Condition: excellent (used), Catalogue number 7445 TECHNICAL DATA - Track width: 250 mm - Roller width: 400 mm - Max. blade diameter: 400 mm - Blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2120 mm *From above: - Pawls - Pressure roller, smooth - Pawls - Pressure roller, smooth - Saw shaft - Smooth pressure rollers, 2 pcs. From below: - Guide - Sliding shaft, smooth - Pawls - Track - Central lubrication - 2 lasers - Infinitely variable feed speed adjustment - Feed motor: 1.1 kW - Main motor: 37 kW - Electric lifting of the frame: 0.75 kW - Electric lifting of the saw shaft: 0.75 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 2200x1850x2100 mm - Weight approx.: 3000 kg ADVANTAGES – German manufacture – Laser Dkedoza D Rrjpfx Ah Ien – Electric lifting of the frame and shaft – Infinitely variable feed speed adjustment – Used multi-blade saw, in very good condition Net price: 109,900 PLN Net price: 26,160 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 2000, Four-spindle moulding machine Number of spindles: 4 Spindle configuration: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Spindle diameter: 40 mm Spindle speed: 6,000 rpm Dkodpfx Aoy Enlfeh Ijn Axial adjustment range of spindles: 30 mm Adjustment range of jointer spindle: 5 mm Jointer spindle motor: 5.5 kW Top spindle motor: 4.5 kW Vertical spindle motors: 7.5 kW Motors with brake Feed roller diameter: 140 mm Length of jointer table: 2,000 mm Pneumatic pressure for feed rollers Infeed roller upstream of first lower spindle, pneumatically actuated Left pressure roller before machine infeed CE compliant Including 4 planing heads Approx. dimensions (L x W x H): 3,000 x 1,250 x 1,550 mm Weight approx.: 1,000 kg Note on used machinery: • Technical specifications and prior sale subject to change. • Stated prices are ex works, free loading at location! • Machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Condition: excellent (used), Year of construction: 2015, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING Dksdozb Ifvjpfx Ah Ien 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 25743, smoke pipe connection diameter: 600 mm, space requirement length: 20,000 mm, space requirement height: 6,000 mm, space requirement width: 12,000 mm, temperature: 110 °C, Mawera FSB1100 biomass heater with flat sliding grate Dkjdpotu Nt Dsfx Ah Ijn With 1100 kW output, year of construction: 2007, general condition: very good. Complete with hydraulic insert incl. hydraulics, combustion chamber, heat exchanger, with all blowers, air preheating, flue gas recirculation, hydraulics for combustion grate and automatic pressure cleaning, multicyclone, automatic ash discharge with gravity discharge, flue gas fan and piping to chimney connection, control system, operating instructions. Silo discharge from push rods is also included. Inspection possible by prior appointment. Still in operation, dismantling in August 2024. Several pictures, videos on request.

Condition: good (used), S+S corner and scissor hinge boring machine with top-mounted unit for drilling lock fittings with HECHT-Positiomat. Dedpfx Ahoy D Edij Iekn - Corner and scissor hinge boring unit drills from below - HECHT-Positiomat for controlling the lock fitting unit (We have not used this) Reliable, well-maintained machine from the reputable manufacturer Schafberger + Sprödhuber

Condition: good (used), Year of construction: 1981, For inquiries: Zoltán Utasi Plus 36 30 205 7380 pindle configuration: Bottom Right Left Top Bottom Dsdpfx Aoy Nmv Dsh Ijkn Spindle speed: 6000 rpm Working width: 170 mm Working height: 120 mm Jointing table length: 2 m Equipped with Waxilit pump Infinitely variable feed speed: 7–18 m/min Side pressure roller Motorized pressure beam adjustment Equipped with 5 cutter heads (3 pcs L180 mm, 2 pcs L130 mm) Machine documentation available

Condition: good (used), Year of construction: 2001, For inquiries: Zoltán Utasi Plus 36 30 205 7380 Grinding of planer knives (conventional and hydro tools, as well as profile knives – profile knives ground based on templates) Machining length: 240 mm Tool diameter: 100–230 mm Grinding wheel diameter: 150–225 mm Grinding wheel width: 2–3–4–10 mm Relief angle: 15–35° Side angle: 0–10° Coolant tank: 50 L Total electrical power: 2 kW Spindle diameter: D40 and D50 mm Dksdpfx Ajy Nmuyjh Ion Infinitely variable speed control for grinding wheel: 1000–3000 rpm Accuracy: within 0.005 mm Motorized lateral feed Liquid-cooled system Equipped with profile copying unit Accessories included (grease pump, knife holder, grinding wheel, dressing tool with tracing pin, template holder) This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: repair required (used), Year of construction: 2010, functionality: not functional, feed rate X-axis: 120 m/min, input frequency: 50 Hz, For sale is a Weinig mechanization system consisting of: Dkjdpfxjv Skays Ah Isn Weinig 811, Weinig 820, Weinig 814, Weinig 811, Weinig 806

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Dkodpfx Ajzawizoh Ijn Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: used, Year of construction: 2006, total width: 4,600 mm, total height: 1,830 mm, Dimensions (LxBxH): 217 x 460 x 183 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 Dsdpfxswnig Ns Ah Iekn - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, total width: 1,280 mm, total height: 1,670 mm, Empty weight: 1.500 kg Dimensions (LxBxH): 22 x 128 x 167 cm Four-sided planer Weinig Unimat 300 5 axis machine Year of construction 2007 Min/max working height 6/120mm Min/max working width 13/230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Input table length 2450mm Engines 1st spindle - Under 5.5kw 2nd/3rd Spindle - Link/Right 11kW 4th Spindle - Above 7.5kW Dodpfswng Uqjx Ah Iskn 5th Spindle - Below 5,5kW Dimensions 4500x1300x1500mm (LxWxH), Weight 1500kg - Year: 2007 - Documentation available: No - CE certificate present: No - Transport dimensions: 222mm x 1280mm x 1670mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, working width: 260 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 160 mm, spindle speed (min.): 7,000 rpm, Weinig Powermat 700 6 spindles 260 mm wide 160 mm high 40 mm spindles 7.000 rpm Feed speed 5-40 m/min Bottom 11.0 KW Dksdpfx Aszaux Hjh Ion Right + left motor joint motor 11.0 KW Top 11.0 KW Top 7.5 KW Bottom 7.5 KW Radial CNC controlled adjustment and positioning left + top spindles Marathon coating for machine tables and fences (excl. infeed table) 2.5 Meter infeed table Memory Plus operating system

Condition: good (used), Technical data for pallet rack frame: Racking system: META (Thyssen) Type: Multipal S Included in delivery: 01x pallet rack frame, used Material color: Sendzimir galvanized Frame type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Including horizontal and diagonal braces, frame protectors and base plates The frames are pre-assembled (bolted lattice construction) Height: 7,000 mm Depth: 500 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Djdeyz Tczepfx Ah Ijkn Mr. Falk Deutsch General information about the item: This item is available for collection only. Transport or shipping beyond self-collection is subject to additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet racking traverse: Dodpjvgtzcofx Ah Iekn Racking system: Mecalux The scope of delivery includes: 01x pallet racking beam, used Beam type: 2C-S 1315 Material color: orange Box profile: 130 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,595 mm Max. load per truss pair 2,650 kg, with evenly distributed load 02x Integrated locking pin, used To secure the longitudinal beams against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet racking upright: Racking system: Dexion Type: S 4 Dodoxxq Tvepfx Ah Ijkn Included in delivery: 01x pallet racking upright, used Material color: Sendzimir galvanized Type: H Profile dimensions: 81.7 x 77.21 x 2.5 mm Including horizontal and diagonal braces, base plates. The uprights are pre-assembled (bolted truss construction) Height: 11,050 mm Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Transport or shipping of this item is associated with additional costs, which can be specifically requested from us depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 1980, No. 3192 Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Joining spindle 4 HP All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Dressing table length 2 m Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Dsdpfxovkhcce Ah Iekn Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 1998, working width: 230 mm, overall weight: 2,500 kg, spindle speed (max.): 6,000 rpm, This 5-spindles WEINIG DIMTER PROFIMAT 23 E was manufactured in 1998. It features a working width of 230 mm and a working height range of 8-120 mm. The machine operates at a spindle speed of 6000 rpm and has a feed rate of 5-24 m/min. If you are looking to get high-quality wood planning capabilities, consider the WEINIG DIMTER PROFIMAT 23 E machine we have for sale. Contact us for further details. • Condition note: Not rebuilt – without warranty • Working height: 8–120 mm • Number of spindles: 5 (top, right, left, bottom, top) • Feed rate: 5–24 m/min Dodpfozaq Taex Ah Ijkn • Total power consumption: approx. 25 kW • Feed table length: approx. 2000 mm