CNC Woodworking Center

HOMAG OPTIMAT BOF 41/VECTOR

Condition: ready for operation (used), Year of construction: 1998, Current: 63A, nominal voltage: 400V. Cgduvol37u

Condition: ready for operation (used), Technical characteristics workpiece length max: 5200 mm - for tool Ø 25: 5375 mm workpiece width max: 1400 mm - for tools Ø 25 mm: 1550 mm workpiece thickness 300 mm max up to 60 mm with a standard clamping device Snvdt console table: consoles with front stop 8 units rear stop (fixed) 4 units lifting rails console length 1340 mm side stops left 2 units - right 2 units suction cups 160 x 115 x 100 mm 16 units suction cups 125 x 75 x 100 mm 8 units vacuum pump 140 m3 / h modern control system from a WINDOWS computer WINDOWS XP operating system Industrial pc 17 inch flat screen Ethernet network connection WOODWOP program voltage 400 V 50/60 HZ additional vacuum pump 100 m3 / h chip conveyor belt 13-spindle drilling head 9 vertical 6 x drilling spindles 4 Y-drilling spindles 4 horizontal spindles 2 pins in X 2 Y-pins main spindle 11kW HSK F63 liquid cooling 1000/24000 rpm Ø of tools 180 mm max C axis including C axis tilt drive unlimited swivel range 12-station tool changer Ø 135 mm CONSOLE LED positioning system workpiece length max: 5200 mm - for tool Ø 25: 5375 mm workpiece width max: 1400 mm - for tools Ø 25 mm: 1550 mm workpiece thickness 300 mm max up to 60 mm with a standard clamping device console table: consoles with front stop 8 units rear stop (fixed) 4 units lifting rails console length 1340 mm side stops left 2 units - right 2 units suction cups 160 x 115 x 100 mm 16 units suction cups 125 x 75 x 100 mm 8 units vacuum pump 140 m3 / h modern control system from a WINDOWS computer WINDOWS XP operating system Industrial pc 17 inch flat screen Ethernet network connection WOODWOP program voltage 400 V 50/60 HZ additional vacuum pump 100 m3 / h chip conveyor belt 13-spindle drilling head 9 vertical 6 x drilling spindles 4 Y-drilling spindles 4 horizontal spindles 2 pins in X 2 Y-pins main spindle 11kW HSK F63 liquid cooling 1000/24000 rpm Ø of tools 180 mm max C axis including C axis tilt drive unlimited swivel range 12-station tool changer Ø 135 mm CONSOLE LED positioning system workpiece length max: 5200 mm - for tool Ø 25: 5375 mm workpiece width max: 1400 mm - for tools Ø 25 mm: 1550 mm workpiece thickness 300 mm max up to 60 mm with a standard clamping device console table: consoles with front stop 8 units rear stop (fixed) 4 units lifting rails console length 1340 mm side stops left 2 units - right 2 units suction cups 160 x 115 x 100 mm 16 units suction cups 125 x 75 x 100 mm 8 units vacuum pump 140 m3 / h modern control system from a WINDOWS computer WINDOWS XP operating system Industrial pc 17 inch flat screen Ethernet network connection WOODWOP program voltage 400 V 50/60 HZ additional vacuum pump 100 m3 / h chip conveyor belt 13-spindle drilling head 9 vertical 6 x drilling spindles 4 Y-drilling spindles 4 horizontal spindles 2 pins in X 2 Y-pins main spindle 11kW HSK F63 liquid cooling 1000/24000 rpm Ø of tools 180 mm max C axis including C axis tilt drive unlimited swivel range 12-station tool changer Ø 135 mm CONSOLE LED positioning system Caractéristiques usinageWindows PCVacuum pump Power and Motors Voltage: 400 V Overall dimensions

Condition: ready for operation (used), machine/vehicle number: 0-201-22-3988, Console clamping table "K" HOMATIC control PC83 with Windows operation Main spindle 7.5 kW Biglwimlcx0 Disk changer 12-fold Interface for changing processing units and gluing unit. Integrated pneumatic/electrical/electronic supply and C-axis drive Drilling head 17 spindles Horizontal adapter drilling head Horizontal adapter trimming spindle Gluing unit 360 degrees Chip conveyor belt Programming system WoodWOP 4.5

Condition: used, Year of construction: 1998, Second hand machine Used 4 axis CNC machining center of the company Homag type Optimat BOF 31/40/K year of construction: 1998 MNr.: 0-201-25-4440 Technical data: Main spindle motor power: 12 kW tool- aggregate interface spindle: HSK F63 Vxg2da Aggregate interface (C - axis) Drilling head 9 spindles vertical 5 in X - direction 5 in Y - direction 12 - fold plate changer Maximum traversing speed: max. 80 m/min in X and Y direction / max. 30 m/min in Z direction Workpiece length: max. 4600 mm for single loading / max. 1700 mm for pendulum loading Workpiece width: max. 1200 mm Workpiece thickness: max. 60 mm with standard clamps / 120 mm with clamping templates 9 clamping brackets Without tools, tool holders and aggregates Availability: short term Location: Röllbach

Condition: used, Year of construction: 2000, HOMAG WORKING CENTER BOF 41/45 / K CE STANDARDS Bfwhvyrixe7 PRICE ON REQUEST

Condition: not inspected (used), Year of construction: 2005, The machine is dismantled. Xmhrbnys

Condition: ready for operation (used), Year of construction: 2002, Current: 50A, nominal voltage: 400V. 0ntvo

Condition: excellent (used), machine/vehicle number: 0-201-08-7963, Travel speeds: Max. 60 m/min. in X-direction Max. 60 m/min. in Y-direction Max. 30 m/min. in Z direction Z-axis for main spindle, travel 800 mm and second Z-axis for drill head 4 vacuum pumps 2 grid exit tables Working height of grid table: 850 mm; grid dimension: 30 mm; slot width: 7 mm; slot depth: 7 mm; distance between vacuum holes: 120 mm Stop bolt for grid table individually selectable, electropneumatically controlled, stroke 60 mm Air cushion function for grid table for easy handling of large format plates Single-circuit vacuum system integrated in the table CONTROL POWER CONTROL PC 85 with PLC CONTROL Software: Windows XP operating system, WOODWOP-PAKET AV-PC WOODWOP TOOLS: woodNest Basic; woodWOP Mosaic; woodType TECHNICAL DATA: Workpiece length X-direction: max. 3440 mm for single occupancy; max. 3740 mm for single occupancy with workpiece stop table outer edge. max. 1680 mm for pendulum loading; max. 1830 mm for pendulum loading with workpiece stop table outer edge Workpiece width Y-direction: max. 3710 mm for milling with tool diam.25 mm max. 3560 mm for all aggregates workpiece thickness- max. 300 mm incl. clamping device 5-AXLE MAIN SPINDLE 15 KW " DRIVE 5+" with vibration sensor AGGREGATE INTERFACE DRIVE 5+ PLATE CHANGER 18 SPINDLES DRILLING HEAD 17 SPINDLES HORIZONTAL + SAW 0/90°. PICKUP PLACE FOR SAW BLADE 350 mm FEEDING PORTAL HOMAG, PROFI TBA370/40/16 machine no. 0.205-08-7964 Feeding portal fixed in stable steel construction with linear guide for the driving axes. Drive via toothed belt with digital AC servo motors for driving the X and Z axes. Automatic central lubrication Workpiece handling unit with vacuum clamp to pick up and align the workpieces on the work table. Travel: X-axis: 11000 mm; Z-axis: 1200 mm. Traverse speed: In X-direction max. 90 m/min; In Z-direction max. 45 m/min. Vacuum lifting unit: Vacuum gripping system for NEST TURNING AND ALIGNING STATION Bb7js0j32k (Subject to changes and errors in the technical data as well as prior sale)

Condition: not inspected (used), Year of construction: 2008, The machine is dismantled. Dko9wz

Condition: ready for operation (used), Year of construction: 2001, Max. workpiece dimensions: 3000x1050mm, connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm. Cgdusyrkjl

Condition: used, cutting length: 3.200 mm cutting width: 2.200 mm cutting height: 50 mm engine: 5,5 kW Dmo2zx Vorritzer: 0,55 kW Panel sizing saw Homag type Optimat CH 03 for formatting/cutting panels and wood with fold-out Length stop for long parts.

Condition: excellent (used), Numerical Control Type Power Control Software TOPDRILL BST 500 No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 20 Ifiiq9ucm

Condition: ready for operation (used), Technical characteristics Adjustment CN opening thickness of left fixed upright Composition of the right mobile upright : 6 tool holders (3 x 2) 1 column at the exit available Extended entry chain 1500 mm Pneumatic device, referencing on retractable entry guide Automatically retractable cleats Pneumatic panel support lifting bars with barrel according to panel thickness, horizontal pneumatic referencing on mobile upright for referencing on entry guide, fixed upright Equipment : 1 automatic scoring machine on circular sector, Ø 180 mm (1.5 kW) 1 horizontal operator group equipped with chipper (4/6kW) 1 left/right rotation router with pneumatic plunge (4/6 kW) 1 column available for future equipment of operator group 1 driving device for the exit of the panels on the lower right/left chain Max. working width: 3000 mm Max useful thickness: 80 mm Dnaj97 Search by typeDouble Power and Motors Overall dimensions

Condition: ready for operation (used), Year of construction: 2018, Main Drive Number of spindles 1 This HOMAG Edgeteq S-390 Optimat KDF 860C wood working was made in 2018 in Germany. Application Types Wood Working Xsmywun

Condition: excellent (used), Year of construction: 2003, Panel saw panel dividing line Homag Optimat HPL11 With optimization program SHEET SIZE MAXIMUM 4100 x 2200 MM MINIMUM PANEL SIZE 2200 x 1600 MM SAW BLADE PROTRUSION 125 MM CUTTING LENGTH 4300 MM Technical DATA. CONNECTED LOAD WITH 13.5KW MOTOR 24.5 KW WITH 18.0KW MOTOR 23 KW WITH 21.0KW MOTOR 32 kW REQUIRED AIR PRESSURE " 5 BAR From location Attention the LIFTING TABLE is not sold and is not part of the machine Y0zxfigg Machine is loaded from the front. Fully operational Daily costs approx. 1980 €

type of input current: AC, input voltage: 400 V, Condition: used, Year of construction: 2001, machine/vehicle number: 0-250-16-0166, Functionality: fully functional, The CNC machine work as it should. The spindel motor was refurbished 3 years ago. Huzvpvo It is stationed in middle east Slovenia.

Condition: good (used), PERSKE high-frequency motor for use in edge post-processing section, e.g. rough trimming. Full type designation: AC-MOTOR 1,5KW 400V 200HZ HSK25R incl. original motor base plate, as quick-changing device for mounting in rough trimming unit. New (list) price HOMAG (2023): 1.220 EURO Cb9t9oc

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Bfmp0uu22ap Y axis working area: 1280 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: ready for operation (used), Technical characteristics Cuzbhtr0cj BOF 611 / 34 / 13 / 2R 4 machining axes + A axis 15kW HSK 63 electrospindle Useful dimension in X : 3740 mm Useful dimension in Y : 1550 mm Useful dimension in Z : 300 mm With gantry feeder HOMAG OPTIMAT Double work table Drilling unit Automatic feeder for bar feeder Power and Motors Pluging: Three-phased Overall dimensions

Condition: used, Year of construction: 1999, machine/vehicle number: 0-201-14-170, X= 4600mm Y= 1250mm Z= 200 mm Drezahl max.: 18.000 U/min WZW 12-fach Nutsäge in X Zentralschmierung Dmmxf9t 17 Bohrspindeln vertikal 9 Konsolen Positionierhilfe 1x Winkelgetriebe Schloka. WoodWOP 4.0 Lagerort: Nattheim

Condition: good (used), Year of construction: 2001, HOMAG BAZ 41 BUILD: 2001 CLAMPING TABLE 6 workpiece supports for hose-free vacuum cups WORKING FIELD X-AXIS : 3000MM Y -AXIS : 1300MM Z -AXIS : 200MM 360 degrees C - axis for the inclusion of adapter aggregates 12-fold tool magazine traveling with the support in the X direction Drilling vertical: X - axis: 6 spindles, pitch 32 mm Y - axis: 6 spindles, pitch 32 mm Milling unit with motor 12 KW MILLING SPEED : MAX. 18.000 U/MIN TOOLHOLDER: HSK F63 CONTROL SYSTEM: POWER PC 83 SOFTWARE: WOODWOP 4.5 CAD: /DXF POSTPROZESSER BACKUP : 2 REMOVABLE HARD DRIVES CONNECTIVITY : NETWORK POSITION SYSTEM : LASER Safety device: * Foot mats in front of the machine Dcvx7hr * Protective fencing on the right with access door Vacuum pump 100 cbm/h WOODTYPE Following adapter aggregates are NOT included UNIVERSAL SAW, SAW, DUO ANGLE HEAD

edge thickness (max.): 20 mm, Condition: excellent (used), Year of construction: 2009, Operating hours: 67,549 h, machine/vehicle number: 0-200-50-1468, Details of execution can be seen in the order confirmation - in addition, the machine was converted to PU gluing approx. 4 years ago. Kwo3s8p3sh

travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, Condition: excellent (used), Year of construction: 2010, Used CNC machining center 2jtqxlv Manufacturer: Homag Type: PROFI BOF 211/40/K year of construction 2010 Technical data: working range X 4000 mm Working range Y 1400 mm with all aggregates 1550 mm For milling with tool 25mm Workpiece thickness Max. 300 mm incl. clamping device max. 60 mm with standard clamping device Main spindle 15 kW Vibration sensor for main spindle YES C-axis YES Interface for Flex-5+ unit YES Tool change places 18-FACH + 10-FACH drilling head MPU V20/H10/S360° add-on milling spindle MPU JA, 6 KW Vacuum pump Amplified 100/140 m³/h Aggregates Suction positioning Flex 6+ Sawing, milling, drilling unit QUICK MOVE + LED display Programming WoodWop 7.1 Computer New computer installed in 2019 Clamex package YES

Condition: excellent (used), Year of construction: 2020, Special equipment Suitable for nesting Edgeband thickness max 6 mm Edgeband height max 65 mm Thickness of coiled edgeband max 3 mm Bgb8ixie8dc Workpiece width min 70 mm Feedrate max 8 m/min Preheating zone Zero joint Hot air Glue system granulate glue pot above feeding chain Quick-change glue pot Suitable for PUR glue Spraying device Premilling unit Trimming saw 2 motors Flush/radius/chamfer milling units 1 Corner rounding unit 1 motor Scraper unit profile and flat Buffing unit Magazine for single strips Aggregates actuated by control pneumatic Type right-side machine Quick-change aggregate(s) Machine length 5.035 mm HOMAG plain PU rollers HOMAG QA 65 HOMAG airTec AT 10 HOMAG FF 6210 HOMAG ZK 6420 Control HOMAG easyTOUCH CE marking

Condition: ready for operation (used), Technical characteristics Qn9wrze Epaisseur de panneau maxi50mm Epaisseur de panneau mini8 mm Epaisseur de chant maxi3mm Epaisseur de chant mini0.4 mm Caractéristiques plaqueuseEnd cut unit Power and Motors Overall dimensions

Condition: used, machine/vehicle number: 006080, Max. panel width: 1200 mm Max. panel length: 3200 mm Rotation system: double cone 2q9wsolns Rotation direction: from long to transverse

Condition: like new (used), Year of construction: 2003, Edgebander Homag with return (boomerang) Type:Optimat KAL 310/8/A20/S2 Serie no:0-200-07-6382 Year:2003 Boomerang Type:ZHR 05/L/095 Serie no:0-305-09-6060 Year:2003 Edgebander Homag with retrun system Boomerang. Machine equipped with: Pre-routers, magazine for edge material on roll 10pcs, hoot melt glue Granulate,cutting units, fine trimmers, profile trimming,corner rounding profile router, skrapers,buffing Max workpiece thickness 60 mm Feeding speed max 24 m/min Max edgeband 3mm and solid stripe max 20mm Stock no:2001531BXA Curfwjukci

Condition: good (used), Year of construction: 2010, For sale is the following machine: HOMAG CNC flat table machine: - Model HOMAG BOF 611 - year 2010 - immediately available - 2 tables - 6 vacuum pumps - second revised main spindle included - technical data on request Hmaj8bzw - without tools - control system Power Control PC85 - tables equipped with cleaning and push-off device - chip conveyor - drilling head 21 V17 / H4 / S 0°-90° - main spindle 18,5 kW / HSK F63 - Main spindle with C-axis for aggregate support - Main spindle with touch probe Senso-Flex - 1. tool changer plate = 10 pos. - 2. tool changer plate = 18 pos.

Condition: excellent (used), Year of construction: 2010, EDGE BANDING UNIT FOR EDGE HEIGHT 105 MM MAX WORKPIECE LENGTH: 6,175 MM MAIN SPINDLE 15 KW for HSK F63 - DIN 69893 C-AXIS WITH UNIT INTERFACE TOOL CHANGER 18-FOLD D=130 DRILLING HEAD 30 SPINDLES: V20 / H10/ S360° "MPU" - 1 motor 2.7 kW, frequency controlled - Maximum speed 7500 rpm 20 HIGH-SPEED VERTICAL SPINDLES 10 HORIZONTAL SPINDLES GROOVE AND CUTTING SAW ADDITIONAL MILLING SPINDLE 6 KW FOR DRILLING HEAD FLEX-5 SAW, MILLING, DRILLING UNIT FOR WZW EXTENSION C-AXIS FOR FLEX-5 UNIT FLUSH MILLING UNIT FOR TOOL CHANGER COMBI FLUSH MILLING SCRAPING UNIT WD 100 MM Cbgcytgv90 COMBI CROP AND CORNER ROUNDING AGGR. TOUCHED LOCK CASE MILLING UNIT 2 SPINDLES D=16/20 CHIP CONVEYOR BELT FOR B200/52-72 LED POSITION INDICATION SYSTEM CONSOLE 1300-1600 MM

Condition: good (used), Year of construction: 2002, Working dimension X 6.800 mm Working dimension Y 1.485 mm Working dimension Z 220 mm 4th axis C-axis Tool changer positions 70 Vertical drilling spindles 23 Machine table Pod and rail table Positioning aid Special workpiece clamping system For windows Control HOMAG HOMATIC PC 83 Software HOMAG WOODWOP 5.0 Number of milling spindles 1 Rotation speed max 18.000 rpm Torque support Tool clamping system HSK-F63 Number of exchangeable units 1 Main motor power 14,5 kW Horizontal drilling spindles in X 6 Groove saw Unit, changeable Cantilever machine Number of consoles 12 Vacuum pump Capacity vacuum pump 200 m³/h Safety device Safety mat Chip conveyor CE marking Declaration of CE-conformity Total connection 36 kW Weight 10.940 kg Space required Length 11.900 mm Width 6.000 mm Height 2.600 mm Workpiece support aids Milling spindle liquid-cooled Stop for top layer protrusion Automatic central lubrication Contour laser Dl98nf HOMAG 3-level clamping system HOMAG Pneumatic / electrical / electronic interface HOMAG PM machine table

Condition: ready for operation (used), Technical characteristics glue tank for HOTMELT glue in granules, possible use of PU glue in granules under the conditions of use two directions of rotation of the glue roller: direction of advance or against advance PC 16 electronic control: BRANDT control system with color graphics modem for remote diagnosis soundproof booth max feed speed 14m / min pneumatic connection 6 bar Bd3fh3ylck lighting inside the hood motorization of the pressure beam adjustable entry guide motorized adjustment of the entry guide motorized pressure zone adjustment QUICKMELT gluing unit dressing unit 200 Hz 2 x 2.2 kW 48 mm diamond router bit set chamfer / straight end cutting unit 2 x 0.35 kW blowing device trimming unit 2 x 0.55 kW 0-25 ° counterflow motorized adjustment of the side probes pneumatic control of the trimming unit path-controlled blowing device trimming unit 2 x 0.55 kW 0-25 ° advance path-controlled blowing device top and bottom form milling unit scraping unit with quick change pneumatic control for scraping 5760/5736 2-motor buffing unit interface for LIGMATECH ZHR 01 / ZHR 02 / ZHR 15 Epaisseur de panneau maxi60mm Epaisseur de panneau mini8 mm Epaisseur de chant maxi12mm Epaisseur de chant mini0.4 mm Caractéristiques plaqueuseDigitized commandGlue tankEnd cut unitAffleurageBand scraper Power and Motors Voltage: 400 V Pluging: Three-phased Power: 17 Kw Overall dimensions Lenght: 6860 mm

Condition: excellent (used), Cutting height 7 cm Working length 336 cm The length of the pick-up table is 220 cm The length of the feeding table is 200 cm Pneumatic clamp 9tbh0gykok Undercutter

Condition: excellent (used), Year of construction: 2007, Used edge banding machine including return Single-sided machine for joint milling straight edges of workpieces, gluing and finishing of various edge materials from roll or in strip form, with an edge thickness of up to 20mm, in longitudinal and transverse feeding. - Feed speed 18m/min- 25m/min - Working height 950mm PREHEATING OF WORKPIECES GLUING UNIT A20 BASIC PRESSURE ZONE WITH AUTOMATIC ADJUSTMENT MAGAZINE FOR 6 EDGES EXTENSION MAGAZINE A6/A-E12/A20 ON REELS NOISE PROTECTION BONDING + AGGREGATE SECTION CROSS CUTTING UNIT HL81/0,8 KW PNEUMATIC ADJUSTMENT OF DRIPS CAPSTANS HL84 STATION HL81 PRE-MILLING UNIT 1,5 KW PNEUMATIC ADJUSTMENT OF PRE-MILLING UNIT FORMING UNIT FK13 AUTOMATIC INTERCHANGEABLE HEADS WITH AUTOMATIC ADJUSTMENT / FK UNIVERSAL MILLING UNIT 4KW CONTROLLED UF11 Bfbxni9q8gk MULTIFUNCTION FINISHING UNIT MN21 AUTOMATIC FINISHING UNIT FA11 TOP / BOTTOM BARCODE READING SYSTEM SINGLE MACHINE OPTIMIZATION TBL110 infeed table Workpiece feed system WZ 10 Workpiece return system ZHR30 TOP/LEFT SPRAYING MECHANISM MILLING UNIT I-SYSTEM-DIA-FUEGEFRAESATZ WD 60

Condition: good (used), Year of construction: 2002, On offer: A CNC - machining centre Brand: Homag (Weeke) Type: Optimal BHC 550 Year of construction: 2002 X-axis: 3900 mm Y-axis: 1635 mm Z-axis: 370 mm Max. workpiece thickness: 370 mm Traversing speeds X-Y-Z: 80/60/20 metres/minute Operating pressure: 7 bar Vacuum pump Brand: Becker Motor power: 3.3 kW Bcmb9ofypcn Speed: 170 rpm Pumping speed: 112 m3/h

Condition: ready for operation (used), Year of construction: 2002, Volume flow: 5455m³/h, connected load: 38kW, with documentation. B8fb8le3tm

Condition: excellent (used), Year of construction: 2003, Homag BOF 311/48/K 4-Axis Machining Center (2003) Icjxt9u9g Auctioneers Note: No Pods, Tooling or Aggregate heads are included. Main Spindle 14.5 KW HSK-63F spindle taper 12 position tool changer 208V 3 phase S/N: 0-201-03-6797

Condition: ready for operation (used), Technical characteristics 5 axes Max workpiece length single 6000 mm, pendulum 2375 mm Max. workpiece width rear 1300 mm Max. workpiece thickness 300 mm, incl. clamping device Consoles with front stop 10 units 100 mm high suction cups for processing the underside of the workpiece Vacuum pump 2 x 100 m3/h Windows control system Windows XP operating system 17" TFT flat screen WOODWOP program Graphic representation of the clamping stations Modern 3D graphic interface software Remote diagnostics Operating voltage 400 V, 50/60 Hz Dmz9lh Control cabinet can be positioned on the right or left 5-axis main spindle 15 kW drive5+ HSK F63 Liquid cooling Electronically controlled from 1000 -24000 rpm Tool length 230 mm max Tool Ø: max 180 mm for milling tools 350 mm max for saw blade use Z-axis travel 750 mm Vibration sensor for monitoring the spindle during machining Tool changer by disc 18 stations D=130 milling tool HSK F63 Place pickup for saw blade 350 mm 25 spindles drilling unit (19 vertical, 2+4 horizontal, grooving saw) Laser projection for positioning of suction cup clamp to show the contour to be milled program in WOODWOP Chip transport belt Power and Motors Overall dimensions

Condition: good (used), Year of construction: 2007, 1. Loading BARGSTEDT O TSH200 / D / 30/12 Cfmgm9zv3f 2. The first HOMAG OPTIMAT KFL 525 / M1 / ​​C machine 3. HOMAG OPTIMAT TDL 510 / C turntable 4. Drug machine machine HOMAG OPTIMAT KFL 526 / M2 / C 5. HOMAG OPTIMAT TDL 510 / C turntable 6. WANDRES THE BRUSH 7. Unloading BARGSTEDT O TSH200 / D / 30/12 The machine is in constant use Machine immediately

Condition: good (used), Year of construction: 2005, On offer: A CNC - machining center Brand: Homag Weeke Type: OPTIMAT BHC Venture 3 working field in X-axis 3250 mm working field in Y-axis 1250 mm Working field in Z axis 225 mm total (125 mm with suction cups 100 mm high) N ° 2 working fields Working plate with bars N ° 6 manually adjustable rods for suction cup support with LED system to facilitate positioning N ° 4 pneumatic bakelite rods to lift the plate F8sdya8mcb N ° 2 manually adjustable suction cups for each rod with vacuum seal to fix the plate during processing with LED system to facilitate positioning N° 1 vertical electrospindle with C-vector axis, with automatic tool change system, HSK cone Automatic tool change system with 14 positions on the back of the machine Tool changing system with 1 position on the front of the machine for large aggregates Drilling head with 18 spindles arranged as follows: - No. 6 vertical in the X axis - N° 6 vertical in the Y axis - N ° 4 horizontal in X axis - N ° 2 horizontal in Y axis Integrated blade for grooving Front protection and safety system with carpets Vacuum pump mc / h 100

Condition: ready for operation (used), Year of construction: 2000, Connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm. Cuzxmybr

Condition: good (used), Year of construction: 2002, On offer: A CNC - machining centre Brand: Homag (Weeke) Type: Optimal BHC 550 Year of construction: 2002 X-axis: 3900 mm Y-axis: 1635 mm Z-axis: 370 mm Max. workpiece thickness: 370 mm Cv9dgznjve Traversing speeds X-Y-Z: 80/60/20 metres/minute Operating pressure: 7 bar Vacuum pump Brand: Becker Motor power: 3.3 kW Speed: 170 rpm Pumping speed: 112 m3/h

Condition: ready for operation (used), Year of construction: 2001, Length: 11,250mm, width: 5250mm, height: 2600mm. Cd7urtyxfb

Condition: like new (used), Year of construction: 1998, double-sided machine for formatting the edge of the workpiece edge banding and finishing of various edge materials from the roll up to 3 mm edge thickness. Use as first machine in a machine line for longitudinal throughfeed. Fixed fence side left, moving side right. basic machine: - with continuous machine column - Glue roller drive at feed stop - Glue container lift at feed stop - Glue container clamping workpiece actuated. workpiece transport device: - rolling block link chain with ball bearings - chain track with precise, hardened running and guiding surfaces - magnetic motor braking of the transport chain - infeed device with 3 inclined rollers - intermediate transport at the outlet 400 mm long. upper pressure: - with driven V-belt - motorized height adjustable width adjustment: - linear guide as well as rolling guides on hardened supports - motorized rapid/creep drive - ball screws and cardan drives for precise positioning - digital position display paint finish: - Homag textured paint gray RDS 240 80 05 Electrical equipment: - Operating voltage 380/400 V, 50/60 Hz - Control voltage 24 V - control cabinet mounted, installed according to Euronorm EN 60204 - electronic frequency converter with motor brake function - manual switch for setup mode Homatic electronic control NC21 control system 2rdet3 Technical data: - Feed infinitely variable 10 - 32 m/min. - Workpiece protrusion fixed 30 mm - workpiece thickness 12 - 40 mm - Working height up to upper edge of chain 950 mm - Working width double-sided min. 240 mm - Working width double-sided max. 1.500 mm - edge material roll 0,3 - 3 mm - Edge cross-section max. - for PVC 135 mm2 - for veneer 100 mm2 - roller diameter max. 900 mm - ground conditions must correspond to the foundation plan Compact double hogger longitudinal 4,5 kW KD10 Free space for subsequent installation of a standard hogging unit controlled 4,5 kW Noise protection Format part Gluing part A3 Noise protection aggregate part basic length Workpiece protrusion adjustment automatic adjustment pressure zone Optimat Edge folding device Cross-cut unit HL81 chamfer/straight free space - 1.050 mm for cross-cut unit pre-milling unit 0,55 kW Free space 350 mm for pre-milling unit Milling unit 0.4 kW Milling unit 0,4 kW chamfer/radii autom. Universal milling unit 4 kW controlled fettling unit profile pneumatic adjustment fettling profile Edge heating white break Electronic width adjustment EB 02 Space requirement: length 6.650 mm x width 5.200 mm Total connected load: 72 kW Rated current: 125 A Total extraction capacity: 18,690 cbm/h Air speed: 35 m/sec. Compressed air consumption: 45 NI/cycle Machine is factory reconditioned, as new, warranty

Condition: excellent (used), Year of construction: 2003, 4 axis C axis Console table with suction cup Laser for suction positioning 8-fold traveling tool changer Woodwop 5.0 Machining lengths: Beyoyp22qvc 3050mm in x 1300mm in y 120mm in z Machine designation: Weeke BHC 350 Manufacturer: Weeke Model: Optimat BHC 350 Year of manufacture: 2003

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Control (CADmatic 4.1 - Professional) Lifting scissor table (mm) 4300 x 2200 Rear pushers (N.) 1 With clamps / grippers (No.) 7 Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 6750 Max blade projection (mm) 110 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 420 / Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (No.) 3 + 1 long Total power (Kw) 28 OPTIONAL: No. 1 Printer for labels Optimizing Software Schnitt Profi(t) Practive Bezyalt0h9

Condition: good (used), HOMAG part number: 4-075-01-0597 NC-Axis positioning motor To be used e.g. in HOMAG edge banding machines Dmhotx e.g. for multi-scraping unit / profile scraping

Condition: good (used), Year of construction: 1999, Clamping table integrated in the machine bed to accommodate the workpiece vacuum clamping devices Plug-in connections for 24 vacuum clamps or templates 20 double-acting vacuum clamps Switch cabinet free-standing. Homag control system Homag Homatic CNC system NC 83 with SPS control system Cs2dvqbqvi Remote diagnosis / telephone modem Technical data workpiece length max. 6600 mm max. 2700 mm with pendulum loading workpiece width max. 1200 mm workpiece thickness max. 60 mm with standard clamps max. 120 mm with clamping templates (customer side) main milling spindle 12 KW frequency converter plate changer 12 times CNC programming system Woodwop Postprocessor Programming according to CNC drawings side and longitudinal stop bolts reinforced vacuum pump vacuum clamp Measuring probe for aggregate carrier Aggregates interface for main spindles drilling head 17 spindles vertical Sawing and cross-cutting unit for WZ changer Drilling-milling unit four spindles F. WZ changer Grinding aggregate with blow-off nozzle The machine is expected to be free in April 2024 (delivery of the new machine). The machine must be removed by the customer in due time before delivery of the new machine.

Condition: excellent (used), Year of construction: 1989, I sell the turning device HOMAG TD41/25/13. Year 1989. Ibppgl2xc One side feeding suitable for line. Element width 1250 + 1250mm Total length 4500mm Available immediately. Ready for work, possible to test. With full manuals.

Condition: not inspected (used), Year of construction: 2000, MAIN DRIVE WITH FREQUENCE INVERTER Nº HOMAG: 1-204-11-0231 Brpmbufl7y

Condition: excellent (used), Year of construction: 2000, I sell the 4-axis milling head CNC working centre HOMAG Joker BAZ41 with beam table, year 2000. Configuration: 1x 4-axis main spindle 12kW S6 750-18.000 rpm water cooling ! Tool change chain system 12 Posizions HSK63 Drilling head 12 spindles in Z-direction Useful working area 3225x1660mm x Z 450mm. 2 working zones Automatic system for central lubrication WoodWop 4.5 software. CE and full documentation included. Fully working with all working heads and equipment. Without Pump ! Available immediately. Jw98xi