Vertical machining center

HAAS UMC-750

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, Pgodpfxekticxe Adnow max table weight 300kg, table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: excellent (used), Year of construction: 2017, operating hours: 6,050 h, functionality: fully functional, travel distance X-axis: 213 mm, travel distance Y-axis: 572 mm, Haas turning center Type: ST 25 Year 2017 Hours of operation 6047h Maximum power rating, drive system 22.4 kW, belt drive Bar capacity, maximum speed 76.0 mm, 3400 r p m Axis movement range (X, Z) 213 mm, 572 mm Psdsrdg H Hspfx Adnjgw Chip extraction Spindle clearance 75mm

Condition: good (used), Year of construction: 2016, 1 used 5-axis machining center Manufacturer: Haas, Model: UMC-750, Year of manufacture: 01/2016, Read spindle hours: 4,960, Feed hours: 10,247 Pjdpfx Ajxyinnjdnjgw Travel X/Y/Z = 762x508x508 mm, 10,000/5,000 Bh Tool holder: SK40, 40-position tool changer, NC SRT table size: 630x500 mm, Maximum table load: 300 kg, Maximum swing diameter: 686 mm,

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1126346, travel distance X-axis: 768 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas Classic Control, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,300 h, coolant supply: 20 bar, spindle motor power: 22,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine has operated in single-shift mode and is available immediately. The machine roof is included. The extraction system can be purchased separately. Pgodpexy Ac Ejfx Adnjw

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, grinding wheel width: 150 mm, grinding wheel diameter: 305 mm, year of last overhaul: 2025, Grinding wheel diameter 305x150 mm, workpiece diameter 1-40 mm, machine for plunge and through-feed grinding, PLC control, coolant system, hardened and ground guideways, grinding and regulating spindles with hydraulic slide bearings via three-point bearings, hydraulically adjustable dressers for grinding and regulating wheels, regulating wheel drive adjustable via AC motor, new German-made electrical system with Siemens components, Siemens S7 control system Pgsdpjwi H Uajfx Adnsw

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1165821, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Number of tool magazine slots: 40 MACHINE DETAILS Tool taper: CT 40 Podpfsxxxgqjx Adnegw Electrical data Voltage: 440 V Phase: 3 Frequency: 50/60 Hz EQUIPMENT Infinitely variable spindle speed Chip conveyor Internal coolant system

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals Pgjdpfsxva Ahex Adnow The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Pgjdpfx Adjwz I Acjnew Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: like new (used), Year of construction: 2013, operating hours: 1,853 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, total height: 2,800 mm, total length: 4,270 mm, total width: 2,350 mm, table width: 508 mm, table length: 686 mm, overall weight: 7,000 kg, spindle speed (max.): 8,100 rpm, CNC controller: Haas Control Axes X-axis travel mm: 762 Y-axis travel mm: 508 Z-axis travel mm: 508 C-axis degrees: 360º (0.001°) B-axis degrees: +120º to -35º (0.001°) Distance spindle nose - table surface mm: 610 Rapid traverse m/min: 22.9 Worktable Number of pallets: 1 Table dimensions mm: Ø 500 Maximum workpiece size (D x H) mm: 686 x 508 Max. workpiece weight kg: 300 Spindle Spindle speed rpm: 8.100 Spindle drive power kW: 22.4 Spindle torque Nm: 2.514 Tool system Tool holder: SK-40 Tool magazine slots: 40 With free neighboring places mm: 127 Pgjdpfxsw Ta Iaj Adnsw With occupied neighboring places mm: 64 Max. Tool Length mm: 305 Max tool weight kg: 5.4 Tool-to-tool time s: 2.8 Chip-to-chip time s: 3.6 Equipment Electronic Handwheel Chip conveyor Rinsing gun Mist collector Workarea light CE conformity Inner/outer air blast RENISHAW OMP 40-2 RENISHAW OTS Optical tool setter Haas Test Bar Cooling Tank capacity: 208 L Machine running times Under power: 10.781 Operating Time: 1.853 Basic machine dimensions / weight Length mm: 4.270 Width mm: 2.350 Height mm: 2.800 Weight kg: 7.000

Condition: excellent (used), Year of construction: 2016, With B + C axis Working travels 762 x 508 x 508 mm Table diameter 500 mm Spindle taper 40 Spindle speeds -12'000 rpm Tool changer 40 Pos. Control HAAS Coolant through spindle Misc.accessories Podpfx Aolhqydjdnogw MARCELS MASCHINEN CH

Year of construction: 2024, condition: used, Grinding wheel holder:: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm max. width of grinding wheel: 70 mm Grinding wheel bore diameter: 20 mm Speed of the diamond / CBN disc spindle: infinitely variable 100 - 1000 rpm., Radius of the grinding wheel: 0-30 mm Dimensions of the dressing wheel: 180 x 25 x 31.75mm, Speed of rotation of the dressing wheel: 200 - 2000 rpm., Oscillation stroke of the dressing wheel: 0-70 mm Connected load of the motor of the dressing wheel: 2,2 kW Weight approx: 1400 kg Dimensions L x W x H: 1850x2300x2100mm, Description: Suitable for dressing and profiling diamond and CBN grinding wheels. Pjdpfolfil Ssx Adnogw ccesories: Total enclosure. Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel), Wheel motor strengthened to 4 kW, Dressing wheel motor strengthened to 2,2 kW, 2 Machine lights 12 V, Optical linear scale with digital display counter (0,001 mm) X, Z Axes, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included), High performance swivelling angle reader (0,05°), Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm, Stepless oscillation speed, Automatic central lubrication, SIC Wheel dresser manual,

Condition: ready for operation (used), Year of construction: 2015, Main Drive Spindle speed range 15000 Tool taper CT 40 Number of axis 5 Movement X-Axis Movement 762 mm Y-Axis Movement 508 mm Z-Axis Movement 508 mm Media Pgedpfx Ajw Ul Diednjw Chip conveyor Yes Internal cooling Yes This 5-axis HAAS UMC 750SS vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a CT 40 cone type, and a tool magazine with 40 + 1 places. Additional features include internal cooling and a chip conveyor. A great opportunity to buy this HAAS UMC 750SS vertical machining center. Contact us for further details regarding this vertical machining center. Application Types Milling

Condition: excellent (used), Year of construction: 2022, Technical Specification of HAAS UMC-750 (2022) • Manufacturer: HAAS • Model: UMC-750 • Year of Manufacture: 2022 • Machine Type: 5-Axis Universal Machining Center Technical Data: • Travel (X / Y / Z): 762 x 508 x 508 mm (30” x 20” x 20”) • Table Size: 630 mm diameter (24.8”) • Maximum Table Load: 300 kg (660 lbs) • Spindle Speed: 12,000 RPM (optional 15,000 RPM) • Spindle Taper: 40 Taper (inline direct-drive) • Spindle Power: 22.4 kW (30 HP) vector drive • Tool Changer Capacity: 30+1 (optional 50+1) • Rapid Traverse Rates: 30.5 m/min (1,200 in/min) • Cutting Feed Rate: 12.7 m/min (500 in/min) • B-Axis Travel (Tilt): +110° to -35° • C-Axis Travel (Rotation): 360° continuous • Automatic Tool Changer: Yes • Coolant System: Standard flood coolant with optional Through-Spindle Coolant (TSC) Pgedpfx Adov Izg Njnsw • Chip Management: Programmable chip auger or conveyor • Control System: Haas CNC Control with Wi-Fi and Ethernet connectivity • Machine Weight: Approx. 6,350 kg (14,000 lbs)• 25 micron filter • Chip conveyor belt • Spindle center coolant pressure 300 psi • Wireless tool and workpiece probe • Side tool changer, ISO 40 taper, 30+1 tools • Synchronized threading • Rotary scale

Condition: used, TECHNICAL DETAILS - grinding diameter : 0.1 – 10 [mm] - total length : 10 [mm] - working stroke : 0-10 [mm] - working grinding wheel dimensions : 150 x 50 x 50 [mm] - driving grinding wheel dimensions : 100 x 50 x 40 [mm] - driving grinding wheel diameter : 100 [mm] - working grinding wheel speed : 4500 [Rpm] Pedpfxjuhb N Se Adnegw - driving grinding wheel speed : 20-50 [Rpm] - power : 6 [kW] - min. pressure : 5.6 [bar] - dimensions : 1300 x 1100 [mm] - weight : 700 [kg]

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 2387 mm Measurements depth 3978 mm Measurements height 2565 mm Machine weight 8200 kg Control Unit Brand HAAS Main Drive Spindle speed range 12000 Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 762 mm Y-Axis Movement 508 mm Z-Axis Movement 508 mm Pgodpfxew Dv N Ao Adnow Table Table load 300 kg This 5-axis HAAS UMC-750 was manufactured in 2019, featuring a robust universal machining center with a 500 mm table diameter and a maximum table load of 300 kg. It includes a high-speed spindle up to 12,000 rpm, ISO 40 taper, and a 40-position tool changer. Ideal for complex geometries and diverse machining tasks. Contact us for more information about this machine. Application Types Milling