Injection molding machine

ENGEL duo 600

Condition: excellent (used), Year of construction: 2009, Operating hours: 44,076 h, With unloading robot Engel Robot ERC 34/1-F (80.000 € new price value) TECHNICAL DETAILS control: control cc 200 Clamping force: 6000 kN Opening force (with pressure pad): 440 kN opening force: 190 kN Mold installation height: 400 - 950 mm platen distance: max. 1750 mm Clamping plate: 1420 x 1370 mm clear tie bar distance: 1030 x 910 mm tie bar diameter: 160 mm platen weight: 9500 mm ejector stroke: 250 mm ejector force: 95 kN dry run: 700 mm / 2,9 s Screw diameter: 105 mm metering stroke: 390 mm Stroke volume: 3380 cbcm Screw speed: 110 rpm L/D screw length: 22 L/D (3-zones) Plasticizing capacity: 95 g/s (3-zones) L/D Screw length: 22 L/D (barrier) Plasticizing capacity: 125 g/s (barrier) Injection flow: 720 cbcm/s Injection flow (increased injection pressure): 635 cbcm/s Spec. injection pressure: 1400 bar Spec. injection pressure (increased): 1600 bar Gql0eau8l Nozzle travel: 600 mm Nozzle contact pressure: 150 kN Heating power: 73 kW Number of heating zones: 7 Pump drive power: 75 kW Oil filling: 1000 l MACHINE DETAILS weight clamping unit: 17 t weight injection unit: 10 t EQUIPMENT 1 x 1-fold core pull hydraulic on the moving platen incl. pressure relief 4 control circuits for mold heating Pneumatic valve gate nozzle is available

Condition: used, Year of construction: 2002, Engel ES7050/1000 DUO , year: 2002 + Engel Robot Clamping force: 1000 ton Distance Between tie bars: 1400x1150 mm (HxV) Clamping plates dimensions: 2020x1830 mm (HxV) Mold installation height max/min: 1200x400mm Mold opening stroke: 1800 mm Tool max weight: 18T Centering: 250x250 Injection pressure : 16500 N/cm3 Injection volume: 5.430 cm³ Screw dia: 120mm Cascade: 12 Core pullers: 2 heating circuits : 16/24 Machine weight 48T +17T Control CC100 Btqpu09b Robot : Engel ERC83/1-E Material used : PP Machine 784

Condition: as good as new (ex-display), Year of construction: 2022, Engel DUO 12060/2000 Injection Moulding Machine Dml7xn Ecodrive - SHV3 - drive with speed control through the use of servo drives Year of production - 2022 NUMBER OF WORKING HOURS - 0 AVAILABLE IMMEDIATELY Control - CC300 Closing system : Closing force 20,000 kN Dimension of tables 2700x2430mm Column spacing 2000x1600mm Opening stroke of the mold 3000mm Max. distance of tables 3800mm Min. mold height 800mm Bimvojceqwd Max. mold height 1800mm Injection system : Auger diameter 120mm Auger stroke 540mm Injection volume 6107cm3 Injection weight 5551g Max. spec. injection pressure 2000bar Heating zones 9 Power supply : 176kW pump motor power Heater power 65,4kW Oil tank capacity 1050l Automatically extendable column on the operator side 2x hydraulic core on fixed plate 2x hydraulic core on moving plate 2x pneumatic core on moving plate 88 zones of heated channels 12-fold connector for controlling mold-closing nozzles Extended injection cylinder, bimetallic, increased corrosion and abrasion resistance. Rotameters 10x fixed plate, 10x movable plate VIPER 60 robot - RC300 integrated Z-axis stroke: 4280mm X axis stroke: 1800mm Y-axis travel: 2600mm B-axis servo, compact drive L, 210 Nm stroke: +90° to -180° C-axis servo, compact drive L, 210 Nm stroke: 0° to 180° 4x Vacum circuit 4x Gripper circuit

Condition: used, Year of construction: 2005, Engel Duo 11050 /1700 Injection Moulding Machine. S/No. 157680 (2005), Max Clamping Force 1700 Tons, Min/Max Shut Height 800mm/1600mm, Max Day Light 3350mm, Distance between Tie Bars (H x V) 1805 x 1405mm, Max Opening Stroke 2250mm, Ejector Stroke 300mm, Total Cores: 6, Number of SVG:8, Max Shot Weight (PS) 5930g, Screw Diameter 120mm, Max Injection Pressure 2020 Bar, No of Hot Runner Zones: 32, Location Ring size 250mm, 570 Max Shot, Max Clamping Force 1700 Tons, CPC 3000MF Control, ATM Robot, Belt Conveyor, Piovan Hopper/Dryer Bgadfgxteym Please Note: This lot is located in Stourbridge, West Midlands, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2008, Engel Injection Moulding Machine Type: DUO 23050/3200 Control: CC200 Year: 2009 Clamping unit Clamping force t: 3200 Opening stroke mm: 3100 Distance between tie bars mm: 2240 x 1800 Installation height min/max mm: 2000 Mould fixing platen size h x v: 3020 x 2680 Injection unit Screw size mm: 150 Injection volume cm³: 12720 Injection pressure increased bar: 1410 Dl7agp Size and weight Dimension HxWxD m: 15 x 5 x 3,57 Total weight Kg: 145.000/29.000 Additional information With EngelRobot

Condition: ready for operation (used), Year of construction: 2017, Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation. Sm39d

Condition: excellent (used), Year of construction: 2006, Injection molding machine ENGEL DUO 3550/650 Year of manufacture -2006 Engel ERC Robot Twin machines available !!!!! Closing unit Closing force [kN] 6500 Clearance between columns (hxv) [mm] 1025/930 Min./ max. mold height [mm] 450/950 Maximum opening width [mm] 1800 Injection unit Dmsatv Screw diameter [mm] 90 (barrier) Injection volume [cm3] 2480 Injection weight [g] 2254 Electric-hydraulic equipment Pump motor rated power [kW] 55 Heater power [kW] 62 Tank capacity - 1000 l Pneumatic cascades - 4 Air valves -2 Hydraulic cores - 5

Condition: good (used), Year of construction: 2005, Engel Injection Moulding Machine Type: Duo 3550/650 with Sepro Robot Control: CC100 Year: 2005 Clamping unit Clamping force t: 650 Opening stroke mm: 1350 Distance between tie bars mm: 1025x930 Installation height min/max mm: 450/950 Cznluf0qyr Mould fixing platen size h x v: 1465x1360 Injection unit Screw size mm: 80 Injection volume cm³: 1960 Injection pressure increased bar: 2025 Size and weight Dimension HxWxD m: 8.3x2.5x2.33 Total weight Kg: 22.000/10.000

Condition: excellent (used), Year of construction: 2002, Injection moulding machine Engel ES 7050/1000 DUO Bhnbeaax Year of manufacture - 2002 Robot - Engel ERC83/1-E Closing unit Closing force [kN] 10000 Clamping plate dimensions (hxv) [mm] 2000 x 1830 Clearance between columns (hxv) [mm] 1400 x 1150 Min./ max. mould height [mm] 400 - 1200 Maximum opening width [mm] 1800 Injection unit Screw diameter [mm] 120 Injection volume [cm3] 5430 Injection size [g] 4936 Injection pressure [bar] 1650 Dimensions and weight Net weight with control cabinet [t] 65

Condition: excellent (used), Year of construction: 2005, Injection moulding machine ENGEL DUO 3550H / 330L / 1000 2 F Bpziapar Year of manufacture - 2005 Closing unit Closing force [kN] 10000 Clearance between columns (hxv) [mm] 1400 x 1150 Min./ max. mould height [mm] 492 - 1092 Maximum opening width [mm] 2292 Injection unit Screw diameter [mm] 105/30mm ( barrier screw) Magnetic mounting table Injection volume [cm3] 3053/100 Injection size [g] 2775/90.9 Electrical and hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 45

Condition: good (used), Year of construction: 2007, Engel Duo 3550/650 injection molding machine Control: CC100 Year of construction: 2007 Closing unit Closing force :6500 kN Opening stroke mm: 1350 Column spacing mm: 1025x930 Mold height min/max mm: 450/950 Plate size:1465x1360 Injection unit Screw diameter mm: 70 Injection volume cm³: 1193 Sldwrqgq Dimensions and weight Dimensions LxWxH m:8.3x2.5x2.33 Machine Weight Kg: 22,000/10,000

Condition: used, Year of construction: 2005, Operating hours: 40,000 h, machine/vehicle number: A 0506 001/0500 , Typ. VEN SPRAY DUO CNC Cabin type : HBS-Duo/C Facilities': Flatbed typeWet in Wet Line Speed: 1,2 m/min Line Lenght: 45 m Dry chamber Lenght: 31,5 m Dry Temp: Max 95°C Max part dimension: 1800mm x 815mm x 200mm D7rpmq8 Spray Type: Watter base Chiller includet

Condition: excellent (used), Year of construction: 2004, For sale: Bzk0veamnw - wide belt sander Heeseman LSM 8 - Venjakob HSG DUO / CNC 6000 - polisher grinder Prochera SPS2-1350 - Lamps UV HACKEMACK

Condition: used, Year of construction: 2004, - Producer Venjakob - Type VEN SPRAY DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled (picture 1) - Duo gun drive system - Dry filter system - Diameter exhaust air pipe 500 mm 8ynmycfxtw - Exhaust air 10.000 m³/h - Transport belttransport System - Feed speed adjustable ~ 2 - 7,5 m/min - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 - Number of installed lacquer circles 2 Stk. - quick change system for spraying guns - Supply air box - Suitably for water based lacquer - Suitably for solvent based lacquer - Switch cabinet built into the machine - Total connection power ~ 29 - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Voltage fluctuation max. +/- 5 % - picture 2: Example for a spraying machine after overhaul

Condition: used, Year of construction: 2004, - Producer Venjakob - Type VEN SPRAY DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system Djwclz - Dry filter system - Diameter exhaust air pipe 500 mm - Exhaust air 10.000 m³/h - Transport belttransport System - Feed speed adjustable ~ 2 - 7,5 m/min - Belt cleaning system - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 - Number of installed lacquer circles 2 pcs. - quick change system for spraying guns - Supply air box - Suitably for water based lacquer - Suitably for solvent based lacquer - Switch cabinet built into the machine - Total connection power ~ 29 - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Voltage fluctuation max. +/- 5 %

Condition: used, Year of construction: 2004, - Producer Venjakob - Type VEN SPRAY DUO/C CNC 6000 Lcjebbd3 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Picture shows example of an overhauled automatic - Duo gun drive system - Dry filter system - Diameter exhaust air pipe 500 mm - Exhaust air 10.000 m³/h - Transport belttransport System - Feed speed adjustable ~ 2 - 7,5 m/min - Belt cleaning system - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 - Number of installed lacquer circles 2 Stk. - quick change system for spraying guns - Supply air box - Suitably for water based lacquer - Suitably for solvent based lacquer - Switch cabinet built into the machine - Total connection power ~ 29 - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Voltage fluctuation max. +/- 5 %

Condition: excellent (used), Year of construction: 1999, Angel ES(VC) 4450/600HL Closing 600 TO Yqtw8 Year 1999 Scrow PP/PVC D90 mm PP/PVC Cylinder with extra groove For PP, PE,... Spraying weight 2480 cm Clamping plate size hear. XVer. 1480x1300 Mould height min 500 mm Operating hours ca 94600 ST

Condition: used, Year of construction: 2004, machine/vehicle number: 51707, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Biumuaggeef Manufacturer: Engel Type: VC 200/80 Power Condition: aus laufender Produktion Operating hours: ca. 81.500 CLAMPING UNIT: - Clamping force: 80 t Opening path: 450 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 670 x 600 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU200 Screw diameter: 30 mm Injection weight in polystyrol: 90 g Stroke volume: 99 cm³ Injection pressure: 2.210 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: ja / yes Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 15 kW Total installed power: 21,8 kW Total weight: 5.200 kg Total size L x B x H: 4,0 x 1,4 x 2,0 m

clamping force: 800 N, screw diameter: 30 mm, injection pressure: 2,166 bar, overall weight: 6,400 kg, Condition: excellent (used), Year of construction: 2007, Operating hours: 63,000 h, ENGEL INSERT 330H/70 rotary Manufacturer ENGEL Year of manufacture 2007 Control unit EC 100 A03 Operating hours 63000 h Machine number: 165861 Clamping unit Vertical clamping unit in portal design with 2-station turntable, protected by light curtain on operator side Clamping unit Khedwmk0mr Clamping force 70 tons / 700 kN Clamping platens 590 x 340 mm Platen distance max. 570 mm Turntable 2-station turntable Ø 1,200 mm 180° oscillating Injection unit Injection unit for processing thermoplastics arranged horizontally Screws Ø 30 mm Injection volume 113 cm³ Injection pressure 2166 bar Machine is fully functional Dimensions/weight 3.50 x 1.70 x 2.54 (l x w x h) Weight: 6400 kg ALL OUR MACHINES ON OFFER ARE OUR SOLE PROPERTY Available immediately from our warehouse in Hanover free loading on the buyer's truck or free delivery against freight reimbursement the machine is offered functionally tested

Condition: ready for operation (used), Year of construction: 2001, Operating hours: 95,757 h, General Data Machine weight 11500 kg This Engel ES 750/175 HL Injection moulding machine was manufactured in the year 2001 and has 95757 production hours. Meqankfw2x Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, ENGEL ERC 24/1 linear robot with complete housing, control cabinet and documentation for sale Megkjeuddv

Condition: good (used), Year of construction: 2005, Injection molding machine ENGEL VC330 -110T Reference: VC 330 /110 Clamping force: 110 T Year: 2005 Number of working hours: 32,659 h Screw diameter: 30 mm L/D: 23.6 Maximum injectable volume: 113 cm3 Injection pressure: 2180 bar Overall platen dimensions : 740 x 470 mm Dbuhgmjok Mold thickness: mini: 300 mm Weight: 7300 kg Dimensions: 4.36m x 1.48m x 2.04m + with 1 Sepro Robot and 1 conveyor belt

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-cavity, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17.000 preforms/hr. Incl. MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Option: 72 core sets for 27.7 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Line comes from our own preform production and has produced until our new line was replaced. Pcmj77vds

Condition: used, Year of construction: 2017, machine/vehicle number: 209902, 8623, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VICTORY 500/120 SPEX + W818 Condition: aus laufender Produktion Operating hours: ca. 32.231 CLAMPING UNIT: - Clamping force: 120 t Opening path: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 740 x 680 mm Biumsbtpg2q Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE500 Screw diameter: 40 mm Injection weight in polystyrol: 229 g Stroke volume: 251 cm³ Injection pressure: 2.020 bar CONTROL: CC300 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 Air valves: ja Hot runner control devices: - Robot interface: Euromap 67 Other equipment: Wittmann W818, 2017 (X-626, Y-1.200, Z-2.000), Nadelverschluss über Ausgang 1, Schnittstelle Farbdosierer und Temperiergerät GENERAL DATA: - Installed heating capacity: 9,3 kW Pump drive power: 20 kW Total installed power: 36 kW Total weight: 6.800 kg Total size L x B x H: 4,8 x 1,6 x 2,1 m

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 U8i7zjbjc Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW Price: On request

Condition: ready for operation (used), Year of construction: 2003, Operating hours: 98,371 h, General Data Machine weight 12900 KG Evmw9cdu This Engel VICTORY 1050/220 Injection moulding machine was manufactured in the year 2003 and has 98371 production hours. Application Types Injection Moulding

Condition: excellent (used), Angel Victory 1350H500V/220 Combi Hnriwmreob Closing 220 tons year 2004 Clamping plan WxH 960x830 Scrow 55mm+40 mm 618 cm3+251 EC100/A03 Minmal mold height 320mm Maximum 730mm

Condition: good (used), Year of construction: 1999, Year: 1999 Number of working hours:: 73,655 h Screw diameter: 60 mm Maximum shot volume: 763 cm3 Max Injection pressure: 1969 bars Overall platen dimensions : 1150 x 900 mm Mold thickness (mini/maxi): 350 mm x 850 mm Mavidd23vt Dimensions: 6.92 m x 2.08 m x 2.14 m + 1 SEPRO Robot

Condition: used, Year of construction: 2017, machine/vehicle number: 213475, 9456, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VICTORY 500/120 SPEX + W818 Condition: aus laufender Produktion Operating hours: ca. 25.637 CLAMPING UNIT: - Clamping force: 120 t Opening path: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 740 x 680 mm Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE500 Screw diameter: 40 mm Injection weight in polystyrol: 229 g Stroke volume: 251 cm³ Injection pressure: 2.020 bar CONTROL: CC300 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 3 Air valves: ja Hot runner control devices: - Robot interface: Euromap 67 Other equipment: Wittmann W818, 2017 (X-626, Y-1.200, Z-2.000), Nadelverschluss über Ausgang 2, Schnittstelle Farbdosierer und Temperiergerät GENERAL DATA: - Installed heating capacity: 9,3 kW Pump drive power: 20 kW Total installed power: 36 kW Total weight: 6.800 kg Xguzrelw Total size L x B x H: 4,8 x 1,6 x 2,1 m

Condition: excellent (used), Year of construction: 2007, Engel e-motion 310/100 / Electric machine / Production line with Engel ERC 13/1-F robot Year of construction: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 0x0 mm Size of the clamping platens: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touch screen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap Robot interface Control system with air valve Hydraulic core pull x 1 Control system with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Central lubrication The machine was regularly serviced by the authorized Engel service department Engel ERC 13/1-F robot Year of construction: 2007 4-axis robot: 3 axes are driven by servo motors (electric) Touch control panel The safety package for robots Robot with adapter Original protective housing Purchase of the robot for an additional charge Dimensions Weight: 9300 kg Length/width/height: 5.23x1.65x2.30 m All offered machines are started by our service technicians before sale. 2mttciw It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2001, Operating hours: 17,798 h, General Data Machine weight 11500 kg Control Unit Brand Engel Model EC 100 Injection Unit Screw diameter 45 cm Shot weight 286 g/ps Clamping Unit Clamping force 2000 kn Hbj2k8q0th Opening stroke 950 mm Mould height min 250 mm Additional Equipment Robot ERC 43 /2-E This Engel ES 650/150 HL Injection moulding machine was manufactured in the year 2001 and has 17798 hours. It is equipped with an Engel EC 100 control unit. The machine has a clamping force of 2000 kN and a screw diameter of 45 mm. Includes a Robot ERC 43 /2-E. Application Types Injection Moulding

Condition: excellent (used), Angel Victory 1350/220 Tech Closing 220 tons year 2004 Clamping plan WxH 860x830 Scrow 55mm 618 cm3 Cc 200 Minimum mold height Hvgislaluv 250mm Maximum 730mm

Condition: good (used), Year of construction: 1999, Year: 1999 Number of working hours:: 73,655 h Screw diameter: 60 mm Maximum shot volume: 763 cm3 Max Injection pressure: 1969 bars 2nweh27q Overall platen dimensions : 1150 x 900 mm Mold thickness (mini/maxi): 350 mm x 850 mm Dimensions: 6.92 m x 2.08 m x 2.14 m + 1 SEPRO Robot

Condition: used, Year of construction: 2008, machine/vehicle number: 169705, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC 330/80 Tech Condition: aus laufender Produktion Operating hours: ca. 60.000 CLAMPING UNIT: - Clamping force: 80 t Opening path: 450 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 670 x 600 mm 2did7d2mc Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU330 Screw diameter: 35 mm Injection weight in polystyrol: 141 g Stroke volume: 154 cm³ Injection pressure: 2.177 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: ja / yes Hot runner control devices: - Robot interface: - GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: 15 kW Total installed power: 24,2 kW Total weight: 5.300 kg Total size L x B x H: 4,4 x 1,5 x 2,5 m

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / production line with robot Engel ER-HLI 41 and conveyor belt / machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm injection weight: 190 g Injection pressure: 1670 bar Metering volume: 201 ccm Clamping unit: clamping force: 110 t tie bar distance: 0x0 mm size of clamping platens: 790x680 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated robot Engel ER-HLI 41 and conveyor belt. Tie-bar-less machine Hydraulic core puller x 1 Injection unit hardened - bimetal Machine serviced by authorized service Engel Machine with original protective housing to the robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Huzwnik Drive: Pumps/motor: 18.5 kW Heating power: 9,2 kW Total power: 27,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2019, Operating hours: 11,781 h, Control Unit Brand Engel Model CC300 Huzcc20 Clamping Unit Clamping force 350 kN This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2019 in Austria and has 11781 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 2 units are available. Application Types Injection Moulding

Condition: used, Year of construction: 2007, machine/vehicle number: 167508, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC 330/120 Tech + ERC23/1-F Condition: aus laufender Produktion Operating hours: ca. 62.000 CLAMPING UNIT: - Clamping force: 120 t Opening path: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 790 x 680 mm Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Injection weight in polystyrol: 141 g Stroke volume: 154 cm³ Injection pressure: 2.177 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 Air valves: ja Hot runner control devices: - Robot interface: Engel integrated Other equipment: inkl. ERC 23/1-F GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: 15 kW Total installed power: 24,2 kW Total weight: 7.300 kg Istnlkm Total size L x B x H: 4,4 x 1,5 x 2,0 m

Condition: excellent (used), Year of construction: 2010, Engel Victory 330/120 Tech / Production line with the Engel Viper 12 robot Year of construction: 2010 Injection unit: Screw diameter: 35 mm Injection weight: approx. 140 g Injection pressure: 1595 bar Metering volume: 154 ccm Clamping unit: Clamping force: 120 t Distance between tie bars: 0x0 mm Size of the clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners x 9 Hardened injection unit - bimetal Main machine motor - servomotor driven by inverter Proportional valve on the injection unit - precise injection The machine was regularly serviced by the authorized Engel service department Delivery of the machine to the customer in 2011 Biohsavksqh Engel Viper 12 robot Year of construction: 2010 4-axis, high-speed robot: 3 axes are driven by servo motors (electric) Touch control panel The safety package for robots Robot with adapter Original protective housing Purchase of the robot for an additional charge Dimensions Weight: 6700 kg Length/width/height: 4.95x1.60x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2001, Operating hours: 99,000 h, Control Unit Brand EC 100 A03 Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 4000 KN H2wlykvr This Engel ES 1800/400 HL Injection moulding machine was manufactured in the year 2001 and has 99000 production hours. It is equipped with a EC 100 A03 control unit. The machine has a clamping force of 4000 kN and a screw diameter of 60 mm. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2015, Engel Victory 200H/60W/180 combi / production line with robot Engel Viper 20 Year of manufacture: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Injection pressure: 2392 bar Metering volume: 61 ccm Clamping unit: Clamping force: 180 t tie bar distance: 0x0 mm size of clamping platens: 1020x980 mm ejector: hydraulic clamping unit: toggle lever Zoa3fab Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot. tie-bar-less machine, hybrid: energy-saving, high-speed and very silent Operating hours: approx. 20.000 h in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced injection units - bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Kistler sensor - mold pressure control Parallel movements The machine has an additional servo motor to drive the mold Outputs / inputs for peripheral devices Robot Engel Viper 20 Year of manufacture: 2015 High-speed robot, 5-axes: X, Y, Z, A, C axes are driven by servo motors (electric) Robot is integrated with the machine and has the additional control panel The safety package for robots Robot with adapter and protective housing Dimensions: Weight: 13200 kg Length/width/height: 5.86x1.98x2.51 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 20000 Control Unit Brand Engel Injection Unit Screw diameter 55 mm Clamping Unit Bcfty7xzrek Clamping force 2750 kN This Engel Es 1050/275 HL Injection moulding machine was manufactured in the year 2003 in Austria. It is equipped with an Engel control unit. The machine has a clamping force of 2750 kN and a screw diameter of 55 mm. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2011, Engel Victory 200/28 Tech with sprue picker Engel ER-USP / tie-bar-less machine Year of manufacture: 2011 Injection unit: Cxlmdbah9 Screw diameter: 25 mm Injection weight: approx. 57 g injection pressure: 2404 bar Metering volume: 69 ccm Clamping unit: Clamping force: 28 t tie bar distance: 0x0 mm size of clamping platens: 500x450 mm ejector: hydraulic clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap Robot interface Air valves Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal The machine with original housing, prepared to work with a sprue picker - sorting Dimensions: Weight: 2900 kg length/width/height: 3.40x1.30x1.80 m Drive: Pumps/motor: 0 kW Heating power: 6,8 kW Total power: 0 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2003, Operating hours: 38,987 h, General Data Measurements width 5600 mm Measurements depth 1800 mm Measurements height 2200 mm Machine weight 9100 kg Control Unit Brand Engel Injection Unit Screw diameter 50 mm Dlp382 Stroke volume 393 cm³ Injection pressure 1439 bar Screw speed 230 1/min Clamping Unit Clamping force 1500 kN Opening stroke 605 mm Ejector stroke 130 mm Ejector force for / back 60,8 kN This Engel Victory 750/150 Tech Injection moulding machine was manufactured in the year 2003 in Austria and has 38987 production hours. It is equipped with an Engel control unit. The machine has a clamping force of 1500 kN, is in good condition and well maintained. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2011, Engel Victory 200/50 Tech / Production line with robot Engel Viper 6 / Operating hours: 10.791 h in automatic mode Year of manufacture: 2011 Injection unit: Screw diameter: 35 mm injection weight: approx. 120 g Injection pressure: 1620 bar Metering volume: 135 ccm Clamping unit: Clamping force: 50 t tie bar distance: 0x0 mm size of clamping platens: 500x450 mm Jlvrht ejector: hydraulic clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Complete production line Tie-bar-less machine Operating hours: 10.791 h in automatic mode Euromap Robot interface Air valve x 4 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal Built-in conveyor belt Robot Engel Viper 6 Year of construction: 2011 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions: Weight: 2700 kg Length/width/height: 3.59x1.94x2.10 m Drive: Pumps/motor: 11 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2017, Operating hours: 12,750 h, General Data Measurements width 2300 mm Measurements depth 2600 mm Measurements height 1400 mm Machine weight 4450 kg Control Unit Brand Engel Model CC300 F2daui7t7 Clamping Unit Clamping force 350 kN This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, Engel Victory 200/50 Focus / tie-bar-less machine Year of manufacture: 2007 Injection unit: Screw diameter: 25 mm Injection weight: approx. 58 g injection pressure: 2404 bar Metering volume: 69 ccm Biogybf0epq Clamping unit: Clamping force: 50 t tie bar distance: 0x0 mm size of clamping platens: 500x450 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 200 Additional equipment: Tie-bar-less machine Hydraulic core puller x 1 Injection unit hardened - bimetal The machine with original housing, prepared for work with a sprue picker - sorting Dimensions: Weight: 2700 kg length/width/height: 3.59x1.29x1.78 m Drive: Pumps/motor: 11 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 1997, Operating hours: 33,896 h, General Data Machine weight 5900 kg Control Unit Brand ENGEL Model CC100 Injection Unit Screw diameter 40 mm This Engel ES 330/110 HL Injection moulding machine was manufactured in the year 1997 and has 33896 production hours. It is equipped with an ENGEL CC100 control unit. The machine has a screw diameter of 40 mm. Application Types Bhwzjos3hij Injection Moulding

Condition: excellent (used), Year of construction: 2011, Engel Victory 330H/80V/80 combi / 2K machine with the Engel Viper 6 robot and turntable. Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm injection weight: approx. 185 g Injection pressure: 1670 bar Metering volume: 201 ccm Clamping unit: Clamping force: 80 t tie bar distance: 0x0 mm size of clamping platens: 670x600 mm ejector: hydraulic clamping unit: hydraulic control: CC 200 - touch screen Additional equipment: Complete production line Maw7f2j2xn 2K machine with rotary table Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 40,000 h in automatic mode Euromap Robot interface Control with air valve Hydraulic core pull x 3 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Screw diameter in vertical injection unit: fi 18 mm Rotary table diameter: mm Robot Engel Viper 6 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Touch control panel The safety package for robots Robot with adapter Purchase of the robot and rotary table for an additional charge Dimensions: Weight: 7100 kg All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2015, Operating hours: 55,201 h, General Data Measurements width 8300 mm Measurements depth 2200 mm Measurements height 2600 mm Machine weight 22200 kg Control Unit Brand ENGEL Model CC300 Injection Unit Nozzle pressure 500 mm Clamping Unit Sekl7 Clamping force 3800 kN Opening stroke 700 mm Mould height min 300 mm Mould height max 750 mm Size of mold platens 1140x1140 mm Ejector force for / back 120 kN Media Main electronic connection 3x400V / 50 Hz This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2015 in Austria and has 53893 production hours. It is controlled by an ENGEL CC300 control unit. The machine has a clamping force of 3800 kN. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2002, Engel Victory 330/80 Tech with sprue picker Engel / tie-bar-less machine Year of manufacture: 2002 Injection unit: Screw diameter: 40 mm Injection weight: approx. 190 g injection pressure: 1670 bar Metering volume: 201 ccm Clamping unit: Clamping force: 80 t tie bar distance: 0x0 mm size of clamping platens: 670x600 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 100 7cy2v09k Additional equipment: Tie-bar-less machine Hydraulic core puller x 2 Control with hot runners x 12 Reinforced injection units - Bimetal Kistler sensor - mold pressure control Dimensions: Weight: 5300 kg Length/width/height: 4.00x1.40x2.00 m Drive: Pumps/motor: 15 kW Heating power: 9,2 kW Total power: 24,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request