Elumatec SBZ 122/73

Elumatec SBZ 122/73

Year of construction: 2018, condition: used, functionality: fully functional, Information about the machine: The machine comes from a metal construction company specializing in the production of windows, doors, and façades made from aluminum. It was purchased in 2018 to relieve several 5-axis machines, specifically for the manufacturing of aluminum front doors. Due to operational restructuring, this machine was no longer used and was released for sale. The machine has been thoroughly cleaned, inspected, and serviced at Weyand’s facility. All worn parts have been replaced. Part programs can be created either directly at the machine (eluCam) or using the included office software eluCad. Also included is the software option package for data import of ECW, NCW, and V6 files, e.g., from LogiKal or Wictop. Machine description: - Efficient machining of aluminum, plastic, and steel profiles - Continuously positionable A-axis from -120 to +120 degrees - Linear guides for clamp movement - Processing results are improved by intelligent control technology - Rapid positioning of the machining unit with speeds up to 120 m/min thanks to dynamic servo drives - Thread cutting without compensating chuck - Automatic clamp recognition and positioning - Automatic tool changer - 4-axis control - No reference run required for main axes due to absolute encoder systems - Collision avoidance via automatic clamp recognition and positioning - Power torque milling motor with closed-loop speed control for short spindle ramp-up and braking times - Certified, drive-integrated safety functions Low power consumption due to intelligent control. Energy recovery via DC-link coupling of the axis drives with regenerative feedback and braking energy buffering. Green-Line cooling unit for the control cabinet with reduced energy consumption. - Windows operating system - 15" flat screen, USB ports and network connection - Simple and convenient program entry using eluCam at the operating terminal – even during machining - Remote maintenance via TCP/IP with internet access Equipment: - Safety enclosure for operator protection - Four horizontal pneumatic clamping units - Material stop left - Minimum quantity lubrication - Handheld control device - Depth gauge Technical data: - Max. machining length (without face-side machining): 4,050 mm - X-axis travel: 4,176 mm, Vmax. 120 m/min - Y-axis travel: 1,040 mm, Vmax. 60 m/min - Z-axis travel: 540 mm, Vmax. 30 m/min - Machining directions: 3+2 (top, rear, front) - Positioning accuracy: +/- 0.1 mm - Max. spindle speed: 20,000 rpm - Spindle power: 7 kW, S1 (water-cooled) - Tool holder: HSK-F63 Lodeyr H Abspfx Adwehg - Automatic tool change - 12 tool positions in automatic magazine - Max. disk cutter diameter: 120 mm - Max. tool length (from taper): 150 mm - Automatic clamp movement - Spanner Basic (with round guide) - Software: eluCam - Compressed air supply: >7 bar - Electrical connection: 400 V, 50 Hz, 22 A - Air consumption per minute approx. 185 l with spray Accessories for the machine (used): - Full enclosure SBZ122/7x (rear wall + roof) - Complete HSK-F63 d16 L=155 holder for disk cutter - Disk cutter D=92x6.0 mm Z=14 d=16, carbide teeth - Right stop SBZ 122170171173 with second clamping circle, for overlength processing - Various used tool holders and cutters - ESTA swarf extraction system eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW, and V6 files

Condition: excellent (used), Year of construction: 2015, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Sinumerik 840Dsl, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, rotational speed infinitely variable, 2x Heller H6000 + Fastems Container Automation Horizontal Machining Centers with Flexible Pallet Container Heller H6000 2 machines with identical specifications Travel ranges Feed force X 1000mm 15kN Y 1000mm 15kN Z 1000mm 20kN B 360°, 0.001° Direct linear measurement system on all axes Rapid traverse: Axis dynamics Power X/Y/Z 50 m/min, 5m/s² B 25 rpm Spindle – Power Cutting Interface: HSK100 Speed: 5–8000 rpm Power: 43kW (40% duty cycle) Torque: 822Nm (40% duty cycle) Last spindle replacement: 2020 Tool Magazine Type: Shelf magazine Magazine positions: 265 Max. tool length: 600mm Max. diameter: 280mm Tool coding: Balluf chip Second control panel at setup station Ledsxxx Dcjpfx Adwshg Setup station with 7 exchange positions Pallet changer Pallet size: 630x630mm Max. interference circle: 1000mm Max. height: 1200mm Max. weight: 1000kg Coolant system: Scraper belt chip conveyor Knoll coolant system Paper band filter Internal coolant supply (ICS) 50 bar, frequency controlled Work area rinsing Emulsion mist extraction Disc blow-off device for operator door Additional equipment: Facing slide device (auxiliary axis/U-axis) 4 facing slides per machine Tangential control incl. NC cycles Wireless measuring probe (Renishaw) Space requirements: 7100x3750x4300mm (LxWxH) Machine weight: 15,600kg Total power requirement: 44kVA Control: Sinumerik 840D sl Fast drill breakage monitoring Process-integrated tool monitoring Status lights 3D workspace model data Operating data acquisition (OPC/UA) Year of manufacture: 2015 Operating hours: approx. 32,000h (Machines still in operation) Fastems Pallet Automation FPC1500 Base container with 2 setup stations Extension container Total 20 pallet positions on 2 levels Control: MMS Space requirements: approx. 18x2.4x4.2m Total space requirement for the system (2x Heller + Fastems) approx. 18x10x4.5m Machines are still in ongoing production. Inspection possible by arrangement. Relocation of the machines can be organized.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, CNC machining center with 4 controlled axes and automatic spindle rotation (0-180°). This enables the machine to reach all 3 profile sides of the workpiece without manual repositioning. The machine is equipped with a water-cooled spindle capable of 20,000 rpm. It is suitable for machining profile bars or parts made of aluminum, PVC, light metal alloys, and steel up to 2 mm. Features a manual tool magazine with 9 slots and an automatic tool magazine with 4 slots on the left side of the enclosure. Additionally, it has a second automatic tool magazine with 4 slots on the right side of the enclosure. The profile is positioned by a pneumatically operated stop on the left, and secured by 4 robust clamps that are positioned and monitored automatically. With a second pneumatic stop on the right-hand side, processing of long bars—twice the machining length (overlength machining)—is possible. A movable clamping area also simplifies loading and unloading of workpieces and considerably increases the maximum workable cross-section. The machine comes with the following special equipment: Ljdpfxsyzb Eks Adwohg - CamPlus software - Shape software for creating custom machining operations and for importing machining drawings/contours - An additional tool magazine - A second stop - A safety enclosure (fully enclosed) Setup, commissioning, and operator training can also be provided by us!

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension Lhsdpfx Adeu Nigkeweg - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: good (used), Year of construction: 2017, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, 5-axis machining center DMG MORI CMX 50 U including robot Year of manufacture: 2017 Control unit: Siemens Operate Technical Data Travel paths: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110° C-axis: 360° Lhedpfxsy Ry N Ts Adwsg Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Drive power – main spindle (100/40% duty cycle): 13 / 9 kW Worktable: Table size: Ø 630 x 500 mm Tool changer: Number of tool stations: 30 positions Feeds: Rapid traverse (x/y/z): 30 m/min Operating hours: Spindle hours: Technical features & accessories: - Direct absolute measuring system in x, y, and z, including air purge - Blowing air switching via M-function - Production package, consisting of: • Internal coolant supply 12 bar • Chip conveyor, tank 250 L • Enclosure roof • Tool changer door can be opened • Signal lamp • Touch probe PP40 • Tool measurement TS27R • Tool breakage monitoring Robot ROBOJOB Type: Mill-Assist-E Year of manufacture: 2018 Spindle bearings replaced in autumn 2025.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Description: The machine is in good technical condition, and a test run is possible by prior arrangement. Equipped with Siemens Shopturn system, including a bar feeder, and supplied in full configuration. BASIC PARAMETERS Max. turning diameter in working area: approx. 410–500 mm Max. length: 800 mm Distance between spindles: approx. 1020 mm Swing over bed: approx. 700 mm Practical application: ideal for shafts, flanges, and housings up to approx. 800 mm Travels (axes) X: approx. 480 mm Y: approx. 100 mm Z: approx. 800–845 mm B axis: approx. 110° (5-axis machining) C axis: 360° (indexing + interpolation) These features make it a true turn-mill center (not a conventional lathe) Spindles Main spindle speed: approx. 5000 rpm Power: approx. 25–34 kW Through bore: approx. 76–87 mm Sub-spindle speed: approx. 6000 rpm Lhodpfoy Rgafex Adwsg Milling spindle (main difference compared to a standard lathe) Speed: up to 12,000 – 20,000 rpm Power: approx. 19–22 kW Taper: HSK-A63 or Capto C6 Capabilities: milling, drilling, tapping, 5-axis simultaneous operations Tool System Magazine: 24–48 tools Live tools: yes (fully integrated) Control system: Siemens 840D sl + CELOS (most common) Weight and dimensions Weight: approx. 10,000 kg Dimensions: approx. 6.5 × 2.7 × 2.0 m

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 171,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Lhsdeyz S T Sepfx Adweg

Year of construction: 2016, condition: used, Manufacturer: Emmegi S.p.A. Machine: PVC Corner Cleaning Machine Model: Trimmer E Year of manufacture: 2016 CNC corner cleaning machine for PVC frame corners, with 3 interpolated axes and automatic cycle. It is equipped with a 300 mm diameter blade that allows, through different machining programs, the cleaning of the external corner of various profiles. Weight: 600 kg Air pressure: 6 – 7 bar Lhedpfsywu A Iox Adweg Motor: E48 63/2 Speed: 2850 1/min Power: 3.5 kW Current: 6 A Power supply: 400/3 V Frequency: 50 Hz

Year of construction: 2020, operating hours: 1,400 h, condition: excellent (used), functionality: fully functional, X axis 7435 mm Y axis 530 mm Z axis 410 mm A/A1 axis ± 125° Electrospindle power: 8.5 kW Max. speed: 24,000 rpm Tool holder: HSK F63 10-position tool changer 8 individually motorized standard vices Pendulum machining Four retractable standard stops Tool length measuring device Lhsdey E S Rlopfx Adwsg Workpiece length probe

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,030 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, spindle motor power: 23,000 W, table load: 1,200 kg, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 8000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details. • Control interface: Heidenhain ERGOline, 19" screen • Rapid traverse: 40 m/min; Acceleration: 4 m/s² • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% ED) • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip 9 s • Tool magazine (optional): 60 tools SK40 / HSK-A63 • Table: 3200 x 1100 mm • Rotary table integrated: 1050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Full enclosure with coolant tank; 2 rotating viewing windows • Air supply: Sealing air for linear measuring systems • Through-spindle air: Selectable via M-function • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic mode enable • Condition/Service history: • New spindle and new guideways, completely renewed by DMG (January 2026) • Geometry remeasured and adjusted by DMG (January 2026) • New spindle less than 100 hours Additional equipment • Chip conveyor: Scraper belt type • Touch probe: Heidenhain TS 649 infrared measuring probe • Tool measurement: Blum laser tool measurement system • Kinematic calibration: 3D quickSET • Machine protection: MPC Machine Protection Control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/mist extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1600 m³/h Lodpfey D Ilcex Adwjhg • Electronic handwheel • Coolant flushing gun (included) Technical Specification Taper Size SK 40