Lathe DOOSAN Lynx 220 LMS

CNC Lathe with C and Y-Axis

DOOSAN LYNX 220 LMA

Call

Condition: good (used), Year of construction: 2008, Catalog No. : 7054 Type: LYNX 220 LMA Producer: DOOSAN G8bi0mfa Made in: 2008 Characteristic: Control system: FANUC Series Oi-TC Total hours: 11781 h Maximum-turning length: 505 mm Turning diameter over bed (max): 250 mm Maximum turning diameter: 250 mm Maximum spindle speed: 6000 1/min Workpiece weight: 130 kg Max. bar diameter: 51 mm Axis X: 175 mm Axis Z: 550 mm Length: 2410 mm Width: 1600 mm Height: 1655 mm Weight: 4000 kg

Listing

Babberich

18,541 km

DOOSAN LYNX 220 LYC

Call

Condition: excellent (used), Year of construction: 2017, CNC Lathe with y-axis DOOSAN - LYNX 220 LYC MACH-ID 7757 Make: DOOSAN Type: LYNX 220 LYC Control: Siemens 840 Year: 2017 incl. LNS Bar feeder QLS 80 S2 incl. Large tooling package incl. tool eye incl. part catcher Specifications Metric US Standard Max. turning Ø 600 mm X-Axis 205 mm Y-Axis 105 mm Z-Axis 560 mm Spindle bore 76 mm Speedrange 4500 Rpm Positions lower revolver 12 Speed live tools 6000 Rpm Power live tools 3,7 kW Pinole taper 4 Mk Stroke pinole 80 mm Quill Ø 65 mm Dimensions (Estimate) Length 2900 mm Width 1710 mm Height 1920 mm Weight 4150 kg B9e9tq08mg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Listing

Heršpická 813/5, 639 00 Brno-střed-Štýřice, Czechia

18,106 km

DOOSAN LYNX 220 LSA

Call

Condition: good (used), Year of construction: 2012, Machine is in good condition, fully functional. Control system Fanuc-i. Machine has opposite spindle. 3rq399sqn8 Swing over bed 600 mm Swing over cross slide 400 mm max. working diameter 525 mm max. working length 51 mm X axe 205 mm Z axe 550 mm Slindle 6000 rpm Number of tools 12 Machine dimensions 2763 x 1627 x 1655 mm Machine weight 3300 kg

Listing

Italy

18,559 km

Doosan 220 KVA emergency generator

Doosan LYNX 220LSY

Call

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand Fanuc Main Drive Spindle speed range 4500 Number of axis 4 This Doosan LYNX 220LSY Lathe was made in 2017. It is equipped with a Fanuc control unit and has 4 axis. The machine has a spindle speed of 4500 rpm. Application Types Kuxpeevj Turning

Listing

Thurmaston

18,691 km

cnc lathe

Doosan Lynx 2100

Call

Condition: excellent (used), Year of construction: 2017, Swing over bed 600mm, swing over carriage 400mm, bar capacity 65mm, machining diameter 350mm, Bioiexwf38q machining length 550mm, 12 position turret, Fanuc i control, Spindle 4500 rpm, swarf conveyor, tool setter, parts catcher, tailstock

Listing

Stromaggregat Doosan 220 KVA Stromerzeuger 220 KVA Doosan

Kropp

18,183 km

Stromaggregat Doosan 220 KVA Stromerzeuger 220 KVA Doosan

Call

Condition: new, Year of construction: 2023, Machine number: 2023-596 Adam Power Systems GmbH thank you for your interest in our machines, please also have a look at our other offers Technical data: Doosan emergency generator 220 kVA + + NEW - Year of construction 2023 + + Manufacturer: Green Power ITALY Original - - - - - Engine:Doosan GP220 Mgua7lcqgb - Model: P086TI - 6cylinder - diesel - 1500 rpm - Displacement: 6700 ccm - - - - - Generator:Mecc Alte - Manufacturer: (French) - 200/ 220 kVA - 230 / 400 Volt - 50 Hertz - AVR controller - - - - - Control / start unit: - Digital ComAp start unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - - - - - Other data: - Dimensions:L330/B1100/H177H - Weight: 2350 - Tank volume: 170 liters - Sound level: approx. 67 dB (7m) - Consumption: 30l/h (75%) Miscellaneous: - An integrated socket package can be ordered for an additional charge - This is expected to include: 1x 400V 32A, 1x 400V 63A, 1x 400V 125A + fuses - - - - - Scope of delivery: - Iveco generator set 200/ 220kVA - in soundproofed housing - with digital control - fuel tank - battery - Exhaust / silencer Adam Power Systems GmbH Generators of all kinds Werkstraße 16, 24848 Kropp

Listing

Deventer

18,511 km

Doosan Lynx 2100 LMB

€69,500

ONO plus VAT

Call

Condition: like new (used), Year of construction: 2018, Doosan Lynx 2100 LMB B0bdons9 BK 2018 Driven tools Tooling included Machine has few working hours and is in very good condition (as new)

Listing

Doosan P086TI - 220 kVA Generator - DPX-19852

Oudenbosch

18,638 km

Generator set

Doosan P086TI - 220 kVA Generator - DPX-19852

€23,500

Call

Condition: new, Year of construction: 2023, General information 3gwfa8r7 Field of application: Construction Drivetrain Type of fuel: Diesel Make of engine: Doosan P086TI Weights Empty weight: 2.100 kg Functional Generator capacity: 220 kVA Other information Fuel consumption: 31.7 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44M Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 285 l Transport dimensions (LxWxH): 3,55x1,13x1,8 Additional information Please contact Arjen van Dijk, Tijmen Pesselse or Kenny Bongers for more information

Buy-it-Now

Lathe

DOOSAN LYNX 220LSYA

€70,800

Condition: excellent (used), Year of construction: 2014, Operating hours: 750 h, Functionality: fully functional, The machine was used by a valve manufacturer. Auction due to closure of the production facility. TECHNICAL DETAILS Control: Doosan Fanuc i-series Turning length: 510 mm turning diameter: 300 mm Swivel diameter over bed: 600 mm Swivel diameter over slide: 400 mm X-axis: 205 mm Y-axis: 105 mm Z-axis: 560 mm H7ztsm98f C-axis: 0.001 mm Speed: max. 6000 rpm Tool turret: 12 positions (all positions driven) 24 positions Index Main spindle clearance: 61 mm Counter spindle clearance: 43 mm Tool holder: Direct holder EQUIPMENT Chip conveyor Touchsetter Parts catcher Counter spindle Conveyor belt for finished parts 2x 3-jaw chuck (main spindle chuck Samchully HS-206 Ø175 mm) (Samchully HS-05 counter spindle chuck Ø135 mm)

Listing

South Korea

9,811 km

Doosan Lynx 220A

Call

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 3500 kg S08m0kk0 Control Unit Brand Fanuc Model i SERIES This Doosan Lynx 220A Lathe was made in 2006 in South Korea. It is equipped with a Fanuc i Series control unit. Application Types Turning

Listing

Tuřanka, 627 00 Brno-Slatina, Tschechien

18,101 km

Lathe CNC

DOOSAN LYNX 2100 B

Call

Condition: excellent (used), Year of construction: 2017, Lathe CNC LYNX 2100 B Producer: DOOSAN YP: 2017 Control Fanuc ... i Series Turning diameter... 350mm Turning length... 330mm inclined bed Spindle bore... 76mm F9puzjl7d Turret head Machine weight... 2750kg Axis X ... 300mm Axis Z ... 360mm Chuck diameter... 210mm Spindle speed ... 1-4500/min. L x W x H ... 2350x1595x1693mm The machine is in good condition and can be tested under power.

Listing

1 Chapel Ln, Bristol BS5 7EY, UK

18,844 km

DOOSAN Lynx 220B

Call

turning diameter over cross slide: 320 mm, turning length: 533 mm, turning diameter: 510 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, Condition: excellent (used), Year of construction: 2012, Choice of 2, both identical!! 2012 built Doosan Lynx 220B CNC lathe with Fanuc control, 8” 3 jaw chuck, collet chuck, barfeed, collet chuck, parts catcher, swarf conveyor, tailstock & tool setter. tailstock, tool setter & swarf conveyor. Specification: Main Spindle Turning Diameter Max: 320mm Main Spindle Turning Length Max: 533mm Main Spindle Chuck Diameter: 200mm Main Spindle Max Swing: 510mm Main Spindle Bar Diameter Max: 65 mm Tail Stock Quill And Body: Standard RPM: 6,000 rpm Max Tools 12 Ovywleae No of Axes and Travels 2 X Axis 175mm 30m/min Z Axis 552mm 30m/min

Listing

Gold Coast

2,427 km

DOOSAN LYNX 220LC

US$26,090

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2007, Doosan LYNX 220 LC CNC Lathe PRICE REDUCTION -Reliable and high-performance CNC lathe, perfect for a variety of applications. This machine is in excellent condition and has been well-maintained. Features: 8l9ryi3dt3 Max turning diameter: 12.6" Max turning length: 20.7" Swing over bed: 20.1" Spindle speed: 4000 RPM 12-station automatic turret Fanuc CNC control Benefits: Accurate and precise machining Fast and efficient production Easy to operate and maintain Durable and reliable This lathe is on offer from the same company as the following high pressure water jetting equipment Price is in USD, and does not include taxes.

Listing

Heršpická 813/5, 639 00 Brno-střed-Štýřice, Czechia

18,106 km

DOOSAN LYNX 2100 A

Call

Condition: excellent (used), Year of construction: 2017, Control system Fanuc i-Series. Axes X/Z: 205/340mm Vwyvdmr Spindle revolutions 6000 rpm ASA A2-5 Max. swing over bed 600 mm Max. swing over cross slide 400 mm Max. working length 330 mm Max. bar diameter 42 mm Number of tools in head 12 pcs Chuck SMW-Autoblok, type KNCS-N 170-43-3-A05-GKB+WAK including 1 set of jaws

Auction

Lathe

DOOSAN LYNX 220LSYA

Condition: excellent (used), Year of construction: 2014, Operating hours: 750 h, Functionality: fully functional, The machine was used by a valve manufacturer. Auction due to closure of the production facility. TECHNICAL DETAILS Control: Doosan Fanuc i-series Turning length: 510 mm turning diameter: 300 mm Swivel diameter over bed: 600 mm Swivel diameter over slide: 400 mm Bjiu30rl X-axis: 205 mm Y-axis: 105 mm Z-axis: 560 mm C-axis: 0.001 mm Speed: max. 6000 rpm Tool turret: 12 positions (all positions driven) 24 positions Index Main spindle clearance: 61 mm Counter spindle clearance: 43 mm Tool holder: Direct holder EQUIPMENT Chip conveyor Touchsetter Parts catcher Counter spindle Conveyor belt for finished parts 2x 3-jaw chuck (main spindle chuck Samchully HS-206 Ø175 mm) (Samchully HS-05 counter spindle chuck Ø135 mm)

Listing

United Kingdom

18,421 km

Doosan Lynx 300

Call

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 3035 mm Measurements depth 1785 mm Measurements height 1715 mm Machine weight 4000 kg Control Unit Brand Fanuc Model Series Oi Main Drive Number of spindles 1 Spindle speed range 3500 Number of axis 2 Movement X-Axis Movement 255 mm Z-Axis Movement 790 mm Turret Number of turrets 1 Tools Slots in storage 12 Bipsujd83ww This Doosan Lynx 300 Lathe was manufactured in the year 2011 in South Korea. It is equipped with a Fanuc Series Oi control unit and has 2 axis. The machine has a spindle speed of 3500 rpm. Application Types Turning

Listing

Venlo

18,586 km

Chassis part

Doosan DX220

€11,489

Call

Condition: new, Year of construction: 2023, Please contact Sales Department for more information Coqyjd0t At Smitma we always have a wide range of undercarriages and components available, from premium brands such as Caterpillar, Hyundai, Hitachi, Volvo and more. All components are available directly from stock.

Listing

Breitenfelde

(dealership location)

18,198 km

Wheel loader

Doosan DL220-7

€131,500

Gas engine / CHP / generator

Call

power: 119 kW (161.79 PS), overall weight: 12,000 kg, fuel type: diesel, color: orange, tire size: 20.5r25, tire condition: 100 %, Condition: new, Year of construction: 2022, machine/vehicle number: 14, Equipment: Additional headlights, Air conditioning, Cabin, Parking heater, - Hydraulic quick coupler - Three-lever control, hydraulically pilot-operated, with feedback function and FNR switch - 3rd hydraulic control circuit - Load damping - LIS (Load Isolation System) - Air conditioning - radio - LED light - reversing camera - Electrically adjustable exterior mirrors - Rotating beacon - DOOSAN SMART KEY remote control - BRIDGESTONE 20.5 R25 - 119 kW - approx. 12,000 kg ! Warranty for 36 months or 5,000 operating hours ! This offer is non-binding, no guarantee for equipment details. Errors, changes and prior sale reserved! Ref. no.: 14 - hydraulic quick coupler - three-lever controls, hydraulically piloted, with feedback function and FNR switch - 3rd hydraulic control circuit - hydraulic lift arm suspension (LIS - Load Isolation System) - air conditioning - radio - LED light - backup camera - electric adjustable rear mirrors - beacon - radio remote control DOOSAN SMART KEY - BRIDGESTONE 20.5 R25 - 119kW Cudsnh2h - about 12,000 kg ! Guarantee for 36 months or 5,000 operating hours! This offer is non-binding, no guarantee for equipment details. Errors and subject to prior sale! Ref. no.: 14

Listing

Hellevoetsluis

18,630 km

Doosan BGA220

Call

power: 350 kW (475.87 PS), Condition: excellent (used), Year of construction: 2008, Doosan gas engine comprising of 10 cylinder with a power of 350 kW. It has a mass of 3740kg and is complete with electric panel. Gkhwhw

Listing

Denkingen

18,679 km

Turning center with counter spindle

Hyundai Wia SE2200LMS

Call

Condition: as good as new (ex-display), Year of construction: 2023, HYUNDAI-WIA TURNING CENTER SE2200LMS BMT 45 Fanuc control F 0i plus with 15" touch monitor Swing diameter 600 mm Bpzibatb Max. Turning length 508 mm Max. Turning diameter 300 mm Chuck HS 160 mm Chuck GS 130 mm Bar passage HS 65 mm Bar passage GS 32 mm spindle speed HS 4500 1/min spindle speed GS 6000 1/min spindle torque HS/GS 167/64 Nm spindle power 15/11 Kw spindle power GS 7,5/3,7 Kw Spindle nose HS A2-6 Spindle nose GS Flat type Travel X 210 mm Z 560 mm ZB 560 mm Number of tools 12(24) pcs Turret type BMT45 Index time 0,15 sec. Applied tools 6000 rpm Power / Torque 2,7KW / 27Nm Coolant tank 200 liters Installation dimensions L 2970 mm W 1610 mm H 1700 mm Weight 3750 kg Other basic equipment: -C-axis operation 0.001Deg -revolver tooling: Outer holder Inner holder Facing holder Cutting holder Set of bushes for boring bars Set of ER collets Driven tools straight Driven tools gewi. Fanuc 0i Plus with Smart Guide i

Listing

Garbsen

18,338 km

Diesel Forklift

Doosan D 30 NXP

€28,500

ONO plus VAT

Call

fuel type: diesel, Condition: used, Year of construction: 2023, Operating hours: 3 h, Diesel Forklift Capacity: 3000kg Load Centre: 500 Lift height: 4710mm Free lift: 940mm Overall Length: 2665mm Overall width: 1290mm Closed height: 2145mm Overall weight: 4850kg Mast type: Triplex Fork length: 1200mm Dnadvn YOM: 2023 Zustand Technisch: New Bereifung vorne Typ: Super Elastic Bereifung vorne Zustand: 100% Bereifung hinten Typ: Super Elastic Bereifung hinten Zustand: 100% Description: Neugerät Side Shift, Fork positioners, 3rd valve, 4th valve, Arbeitsscheinwerfer hinten, Arbeitsscheinwerfer vorn, Overhead guard, Front screen, Load guard grill, Full free lift, CE certificate,

Listing

Leipzig

18,264 km

Generator

Doosan PO86TI

Call

Condition: used, Year of construction: 2021, rated capacity: 220 kVA drive motor: kW Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah B972wkxa Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H

Listing

Breitenfelde

(dealership location)

18,198 km

Hydraulic Excavators

Doosan DX 210 LC-7

€132,000

Call

power: 127 kW (172.67 PS), fuel type: diesel, color: orange, drive condition: 100 %, chain condition: 100 %, Condition: new, Year of construction: 2022, Operating hours: 5 h, machine/vehicle number: 75, Equipment: Additional headlights, Air conditioning, Cabin, Low noise, Steel track, - Mono jib - Boom 5.60 m - Stick 2.90 m - Hydraulic line for hammer/grab/shear and quick coupler - Refueling pump - 12 x LED work lights - Rotating beacon - Reversing camera and side camera right - Proportional control - Air conditioning - Heated and cooled driver's seat - radio - Doosan connect (telematics) - Doosan Smart Key - Floor plates 600 mm - Weight kg - Diesel engine with 127 kW power This offer is non-binding, no guarantee for equipment details. Errors, changes and prior sale reserved! Ref. no.: 75 _____ - Mono boom - Boom m - Stick m - Hydraulic line for hammer/grapple/shears and quick coupler - Refueling pump - 12 x LED work lights - Beacon - Reversing camera and side camera on the right - Proportional control - Air conditioning - Heated and cooled driver's seat - Radio - Doosan connect (telematics) - Doosan Smart Key - Floor plates 600 mm - Weight 23,400 kg Bitgitwzqqk - Diesel engine with 127 kW power This offer is non-binding, no guarantee for equipment details. Errors and subject to prior sale! Ref. no.: 75

Listing

Venlo

18,586 km

Doosan DX225LC-5

€59,900

Twin pallet vertical machining center

Call

Condition: used, Year of construction: 2018, Operating hours: 6,512 h, Field of application: Construction Empty weight: 22.700 kg Serial number: DHKCEBBUPJ0001856 Transport dimensions (LxWxH): 0,0095x0,0032x0,0034 Please contact Sales Department for more information SPECIFICATIONS Engine brand and model Doosan DL06P Engine power in kW 124kW Bis7aoslsm8 CE Yes Air conditioning Yes Cabin protection No Cat walk No Width of the pads 800mm Boom Mono boom Length of the stick 2.90m Bucket Digging bucket with teeth Width of the bucket 1.45m Piped Piped for hammer AM/FM Radio Yes Overall condition In good and clean condition.

Listing

Weyhe

18,330 km

LPG Forklifts

Doosan G 30 P-7

€26,950

ONO plus VAT

Call

fuel type: gas, Condition: used, Year of construction: 2021, Operating hours: 3 h, LPG Forklifts Zzxebypc Capacity: 3000kg Lift height: 4730mm Free lift: 1400mm Closed height: 2165mm Mast type: Triplex Fork length: 1200mm YOM: 2021 Zustand Technisch: New Transmission: Automatik Bereifung vorne Typ: Super Elastic Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Super Elastic Bereifung hinten Zustand: 80 - 100% Description: Neugerät inklusive Herstellergarantie 18 Monate oder 2000 Betriebsstunden, UVV Prüfung NEU, Gerne organisieren wir Ihnen einen kostengünstigen Transport. Side Shift, Seitenschieber integriert 3rd valve, 4th valve, Arbeitsscheinwerfer hinten, Arbeitsscheinwerfer vorn, Overhead guard, Full free lift, CE certificate,

Listing

Dußlingen

(dealership location)

18,638 km

Diesel Forklift

Doosan D50SC-5

Call

fuel type: diesel, Condition: excellent (used), Year of construction: 2011, Operating hours: 8,448 h, Diesel Forklift Capacity: 5000kg Lift height: 4200mm Overall weight: 2180kg Mast type: Triplex YOM: 2011 Front tyres type: SE Rear tyres type: SE Heating Work lights Free lift Soot filter Oil separator Magnet valve Load backrest Protective roof Be28unath8j

Listing

Thurmaston

18,691 km

Doosan VC510

Call

Condition: good (used), Year of construction: 2012, Traverses X Y Z; 762 x 516 570mm, Table size 860 x 570mm, Table load 350 kgs, spindle power 18.5Kw, spindle speed 10,000 rpm, spindle taper BT40, 30 station ATC, Bir0jjnqyad Fanuc I control, through spindle coolant, swarf conveyor

Listing

Cuggiono

18,798 km

DOOSAN PUMA 2600LY

Call

turning length: 1,280 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, main spindle motor power: 22 W, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 30 mm/min, rapid traverse Y-axis: 10 mm/min, rapid traverse Z-axis: 30 mm/min, Condition: good (used), Year of construction: 2015, Operating hours: 8,219 h, Functionality: fully functional, 4-axis CNC lathe "DOOSAN PUMA model PUMA 2600LY" with driven tools, Y axis and CNC FANUC 0i-TD Dm9gcr

Listing

Italy

18,559 km

Machining centers (horizontal)

Doosan NHP 5000

Call

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 2680 mm Measurements depth 5450 mm Measurements height 2880 mm Machine weight 11500 kg Control Unit Brand FANUC Model 31I-MODEL B Main Drive Spindle speed range 15000 Tool taper ISO 40 Number of axis 4 Movement X-Axis Movement 730 mm Y-Axis Movement 730 mm Z-Axis Movement 880 mm Ix0qm9vnal Table Outer length 10900 mm Outer width 800 mm Tools Slots in storage 60 This DOOSAN NHP 5000 Horizontal Machining center was manufactured in the year 2021. It is equipped with a FANUC 31I-MODEL B control unit and has 4 axis. The machine has a spindle speed of 15000 rpm. Application Types Milling

Listing

Venlo

18,586 km

Doosan DX225LC-3

€42,900

Call

Condition: used, Year of construction: 2013, Operating hours: 8,077 h, Field of application: Construction Empty weight: 21.900 kg Serial number: DWBCEBBHCD0050094 Transport dimensions (LxWxH): 0,0097x0,003x0,00295 Please contact Sales Department for more information SPECIFICATIONS Engine brand and model Doosan DL06KB Engine power in kW 121kW CE Yes Air conditioning Yes Cabin protection No Cat walk Yes Width of the pads 600mm Boom Mono boom Length of the stick 2.90m Bucket New digging bucket with teeth Piped Piped for hammer, shear and clamp Mfnfth2ju2 AM/FM Radio Yes Overall condition In good and clean condition.

Listing

Cuggiono

18,798 km

DOOSAN PUMA GT3100LM

Call

turning length: 1,250 mm, turning diameter over cross slide: 720 mm, turning diameter: 376 mm, main spindle motor power: 22 W, spindle speed (min.): 20 rpm, spindle speed (max.): 2,800 rpm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 24 mm/min, rapid traverse Z-axis: 30 mm/min, Condition: excellent (used), Year of construction: 2016, Operating hours: 7,931 h, Functionality: fully functional, 3-axis CNC lathe "DOOSAN model PUMA GT3100LM" with driven tools and FANUC 0i-TF CNC Birv7tcl9rh

Listing

Italy

18,559 km

Doosan Mynx NM 410

Call

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 2745 kg Control Unit Brand FANUC Model Series 0i-MB Isp99ba Main Drive Spindle speed range 8000 Number of axis 3 Movement X-Axis Movement 820 mm Y-Axis Movement 410 mm Z-Axis Movement 510 mm Table Outer length 1000 mm Outer width 450 mm This Doosan Mynx NM 410 Vertical Machining center was manufactured in the year 2006 in Korea. It is equipped with a FANUC Series 0i-MB control unit and has 3 axis. The machine has a spindle speed of 8000 rpm. Application Types Milling

Listing

Venlo

18,586 km

Doosan DX180LC-5

€79,900

Call

Condition: used, Year of construction: 2018, Operating hours: 580 h, Field of application: Construction Empty weight: 19.200 kg Serial number: DHKCEBBTVH0001251 Dm9tev Transport dimensions (LxWxH): 0,00885x0,003x0,0032 Please contact Sales Department for more information

Listing

Slovenia

18,318 km

Doosan MYNX 750

Call

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand FANUC Model 21i-mb Main Drive Spindle speed range 12000 Spindle motor power 26 kW Number of axis 3 Movement X-Axis Movement 1525 mm Y-Axis Movement 762 mm Z-Axis Movement 625 mm Table Outer length 1600 mm Outer width 750 mm Tools Type of tool holder BT 40 F3pxelrd7 This DOOSAN-MYNX 75 Vertical Machining center was manufactured in the year 2009 in Korea. It is equipped with a FANUC 21i-MB control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Listing

Venlo

18,586 km

Doosan DX300LC-5

€69,500

Call

Condition: used, Year of construction: 2016, Operating hours: 7,343 h, Field of application: Construction Bis38p9uvej Empty weight: 32.000 kg Serial number: DHKCEGBCCG0001429 Transport dimensions (LxWxH): 0,01065x0,0032x0,00345 Please contact Sales Department for more information SPECIFICATIONS Engine brand and model Scania DC09 Engine power in kW 202kW CE Yes Air conditioning Yes Cabin protection No Cat walk No Width of the pads 800mm Boom Mono boom Bucket Digging bucket with teeth Width of the bucket 1.50m Piped Piped for hammer AM/FM Radio Yes Overall condition In good and clean condition.

Listing

United Kingdom

18,421 km

Doosan DNM 6700

Call

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 4342 mm Measurements depth 2415 mm Measurements height 3100 mm Machine weight 8500 kg Control Unit Brand Doosan Fanuc Model i Series Bimy0ndxmcm Main Drive Number of spindles 1 Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1300 mm Y-Axis Movement 670 mm Z-Axis Movement 625 mm Tools Slots in storage 30 Max weight 8 kg Max tool diameter 80/125 mm Max tool length 300 mm Type of tool holder BT 40 This Doosan DNM 6700 Vertical Machining center was manufactured in the year 2016 in South Korea. It is equipped with a Doosan Fanuc i-Series control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Listing

South Korea

9,811 km

DOOSAN 240

Call

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 3940 kg Control Unit Brand Vision Model 380i Hrtlwyyxc7 This Doosan 240 Lathe was manufactured in the year 2008 in South Korea. It is equipped with a Vision 380i control unit. Application Types Turning

Listing

United Kingdom

18,421 km

DOOSAN 5100LB

Call

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand Fanuc Model Series OiT Main Drive Bxhs3djr Spindle speed range 1500 Number of axis 2 This DOOSAN 5100LB Lathe was made in 2018. It is equipped with a Fanuc Series OiT control unit and has 2 axis. The machine has a spindle speed of 1500 rpm. Application Types Turning

Listing

Israel

16,309 km

Doosan DNM 6700 XL

Call

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 4800 mm Measurements depth 2970 mm Measurements height 3120 mm Machine weight 10000 kg Control Unit Brand FANUC Fuyvnaov3n Model Series 0i Plus Main Drive Spindle speed range 12000 Movement X-Axis Movement 2100 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 670 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 625 mm Z-Axis Rapid Traverse 30 m/min Tools Max weight 8 kg Max tool diameter 80-125 mm Max tool length 300 mm This Doosan DNM 6700 XL Vertical Machining Center was manufactured in the year 2023 in Korea. It is equipped with a FANUC Series 0i Plus control unit. The machine has a spindle speed of 12000 rpm. Application Types Milling

Listing

Portugal

19,724 km

Doosan NX 5500 II

Call

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2900 mm Measurements depth 2530 mm Measurements height 3064 mm Machine weight 9000 kg Control Unit Brand FANUC Model 31i Bd7nqi0ezko Main Drive Spindle speed range 20000 Spindle motor power 11 kW Number of axis 3 Movement X-Axis Movement 900 mm Y-Axis Movement 550 mm Z-Axis Movement 500 mm Table Outer length 1000 mm Outer width 550 mm Table load 700 kg Tools Slots in storage 30 Max weight 7 kg Max tool diameter 80 mm Max tool length 220 mm This Doosan NX 5500 II Vertical Machining Center was manufactured in the year 2013. It is equipped with a FANUC 31i control unit and has 3 axis. The machines has a spindle speed of 20000 rpm. Application Types Milling

Listing

South Korea

9,811 km

Doosan DNM350/5AX

Call

Condition: ready for operation (used), Year of construction: 2017, Operating hours: 1,685 h, Control Unit Brand FANUC Model Series 31i-MODEL B5 Main Drive Spindle speed range 20000 Movement X-Axis Movement 400 mm Y-Axis Movement 655 mm 8sk37dmtlk Z-Axis Movement 500 mm Media Main electronic connection 220V /50-60Hz This DOOSAN DNM350/5AX Vertical Machining center was manufactured in the year 2017 and has 1685 production hours, of which 1522 are cutting hours. It is equipped with a Fanuc Series 31i-MODEL B5 control unit. The machine has a spindle speed of 2000 rpm. There are 2 unites available. Application Types Milling

Listing

Spain

19,912 km

DOOSAN MX2000S

Call

Condition: ready for operation (used), Year of construction: 2007, Operating hours: 15,000 h, General Data Measurements width 4500 mm Measurements depth 2300 mm Measurements height 2600 mm Control Unit Brand Fanuc Model Series 16i-TB Main Drive Spindle speed range 5000 Spindle motor power 22 kw Number of axis 9 Bgu2fkxlbcc Movement Y-Axis Movement +/- 80 mm This Doosan MX2000S lathe was made in the year 2007 and has 15000 hours. It is equipped with a Fanuc Series 16i-TB control unit and has 9 axis. The machine has a spindle speed of 5000 rpm. Application Types Turning

Listing

France

19,201 km

Doosan MYNX DNM 6500

Call

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 3200 mm Measurements depth 2750 mm Measurements height 2940 mm Machine weight 9000 kg Control Unit Brand Fanuc Tiwosm0zz Model i Series Main Drive Spindle speed range 18000 Spindle motor power 15 kW Tool taper BT 40 Number of axis 4 Movement X-Axis Movement 1270 mm Y-Axis Movement 670 mm Z-Axis Movement 625 mm Table Outer length 1400 mm Outer width 670 mm Table load 1000 kg This is DOOSAN MYNX DNM 6500 Vertical Machining center was manufactured in the year 2011. It is equipped with a Fanuc i Series control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. Application Types Milling

Listing

Italy

18,559 km

Machining centers (horizontal)

DOOSAN QL200HM

Call

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 7200 kg I2klpkdkbj Control Unit Brand Fanuc Model Series 18i-TB Main Drive Spindle speed range 40-4000 Spindle motor power 11/15 kW Tool taper ASA A2-6 Movement X-Axis Movement 180 mm C-Axis Movement ±360º This Doosan QL200HM Lathe was manufactured in the year 2008 in Korea. It is equipped with a Fanuc Series 18i-TB control unit. The machine has a spindle speed of 40-4000 rpm. Application Types Turning

Listing

Italy

18,559 km

Doosan HP5100

Call

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Main Drive Spindle speed range 1 - 30000 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 700 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min This Doosan HP5100 Horizontal Machine Center was built in the year 2008. It is equipped with a FANUC control unit. The machine has a spindle speed of 1 - 30000 rpm. Application Types Rbyx7rp Milling

Listing

Italy

18,559 km

Machining centers (horizontal)

DOOSAN Puma 3100LY

Call

Condition: ready for operation (used), Year of construction: 2019, Operating hours: 1,150 h, General Data Measurements width 2280 mm Measurements depth 5595 mm Measurements height 2315 mm Bndooipde8 Machine weight 10800 kg Control Unit Brand DOOSAN FANUC Model i SERIES Main Drive Spindle speed range 3000 Spindle motor power 22/18.5 KW Movement X-Axis Movement 293 mm Y-Axis Movement 2190 mm Z-Axis Movement 130 mm This Doosan Puma 3100LY Lathe was manufactured in the year 2019 in Korea and has approximately 1150 hours. It is equipped with a DOOSAN FANUC i SERIES control unit. The machine has a spindle speed of 3000 rpm. Application Types Turning

Listing

Italy

18,559 km

Doosan HP 6300

Call

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 12000 kg Control Unit Brand FANUC Model SERIES 18i-MB Movement X-Axis Movement 1000 mm 8ussyhii7a X-Axis Rapid Traverse 48 m/min Y-Axis Movement 850 mm Y-Axis Rapid Traverse 48 m/min Z-Axis Movement 850 mm Z-Axis Rapid Traverse 48 m/min This DOOSAN HP 6300 Horizontal Machining center was made in 2007 in Korea. It is equipped with a Fanuc Series 18i-MB control unit. Application Types Milling

Listing

France

19,201 km

Doosan MYNX DNM 500 II

Call

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 3000 mm Measurements depth 2550 mm Measurements height 2740 mm Machine weight 6500 kg Control Unit Brand Fanuc Model i Series Main Drive Spindle speed range 12000 Spindle motor power 15 KW Tool taper BT 40 7ayrj37dr3 Movement X-Axis Movement 1020 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 540 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 36 m/min Table Outer length 1200 mm Outer width 540 mm Table load 800 kg This DOOSAN MYNX DNM 500 II Vertical Machining center was manufactured in the year 2014. It is equipped with a Fanuc i Series control unit. The machine has a spindle speed of 12000 rpm. Application Types Milling

Listing

Hungary

17,958 km

DOOSAN DNM 5700

Call

Condition: ready for operation (used), Year of construction: 2019, Operating hours: 1,200 h, Control Unit Brand FANUC Model 0iMF Main Drive Spindle speed range 12000 Spindle motor power 18,5 kW Number of axis 3+1 Movement X-Axis Movement 1050 mm Y-Axis Movement 570 mm Z-Axis Movement 510 mm Table Table load 1000 kg Bwqe22tobw This DOOSAN DNM 5700 Vertical Machining Center was manufactured in the year 2019 and has 1200 production hours. It is equipped with a FANUC 0iMF control unit and has 3+1 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Listing

Italy

18,559 km