Universal milling machine

DECKEL FP3 L Aktiv

Condition: good (used), Year of construction: 1979, Net price, plus VAT. Internal article no.: 23072 universal milling machine Cover FP3 L active Digital Machine No.: 2302-2373 BJ:1979 + turn- swivel table + machine lamp Dhiz33kj7 + electrical circuit diagram + original paint spindle speed: 50-2500 rpm. feed: 5-500mm/min. /(stepless) travel: X 800 Y 300 Z 400mm clamping area table: 1000 x 520mm Connected load: 9,5 KVA

Condition: good (used), Year of construction: 1975, Cover FP3L with fixed angle table , 3-axis Heidenhain digital readout , vertical milling head , SK 40 S20x2 spindle mount . Ready for operation. Ready for demonstration under power by arrangement. Dm2hyb

Condition: good (used), Year of construction: 1979, Universal milling machine Lid FP3 L active Digital Machine No.: 2302-2373 BJ:1979 + turn- swivel table + machine lamp + electrical circuit diagram + original paint spindle speed: 50-2500 rpm. P9vyhysg feed: 5-500mm/min. /(stepless) travel: X 800 Y 300 Z 400mm clamping area table: 1000 x 520mm Connected load: 9,5 KVA Folding beam on Y-axis is missing Motor bearing of drive motor is noisy and should be replaced

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of construction: unknown - overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2302-2319 milling head type: 2271 milling head number: 700-0883 Warranty: 12 months single shift from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. It corresponds accordingly also to the state, which was valid at the time of the respective year of construction. For machines that are located outside of our northern Bavarian sales area, the travel costs are to be borne by the customer. Geometric acceptance with test report accessories: - 3-axis active digital display Cey0gq9y HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - vertical milling head SK 40 with tightening thread S 20 x 2 - central lubrication, electric - coolant device - operating instructions - Drill grinding device with diamond wheel -used, as seen-

Condition: good (used), Year of construction: 1975, Cover FP3L with.adjustable angle table , vertical milling head,SK 40 S20x2 spindle mount . Good working condition. After consultation under power ready for demonstration. Q0jgt

Condition: excellent (used), Year of construction: 1980, Tool milling machine cover FP3 *partly overhauled* Stock number: 07-07-091 Machine data: Year of construction: approx. 1980 L x W x H: approx. 2000 x 1600 x 1900 mm Weight: about 1500 kg Machine is in very good used condition Delivery time on request - subject to prior sale Machine partially overhauled* Bi8xwmmf2w Technical specifications: Digital display: 3 - axis - digital display *NEW* traverse paths: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Table clamping area: approx. 800 x 420 mm Spindle: Speed ​​range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & Rapids: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Accesories: -Vertical & horizontal milling device -drilling quill -Coolant device -Complete machine documentation -Various wrenches -Horizontal - Spindle Top Cap -Safety handwheels -3-axis digital display *NEW* -Machine feet -Work light -electric milling spindle protection *optional* -Transport, installation & commissioning *optional* Further accessories on request Price and other technical data on request

Condition: used, No. 5032: 1 branded universal tool milling machine make DECKEL type FP 2 active ( 2202 ) year of construction 1981 3-axis active digital display Heidenhain working area: 400 x 220 x 400 mm Jxmvcm drive power: 2 kW equipment: Rigid table / angular table 700 x 330 mm Foldable splash guard with chip tray Machine feet, Documentation Other: Spindle mounting SK 40 / M 16 Speed range 25 - 2,500 min-1 Space requirement approx. 2.5 x 1.8 x 1.8 m Weight approx. 1,5 to Immediately available from stock Machine can be seen and tested under power

travel distance X-axis: 300 mm, travel distance Z-axis: 340 mm, Condition: excellent (used), Year of construction: 1986, Universal milling machine Fab. DECKEL Typ. FP1 active year 1986 Technical data Make: Lid Type: FP1 active Year of manufacture: 1986 Travel X/Y/Z: 300 / 160 / 340 mm Speeds: 40 - 2000 rpm Feed: infinitely variable in 3 axes Tool holder: SK 40 Rapid traverse: in 3 axes Drive power: 1.5 / 1.9 kW Installation dimensions: approx. 1.6 x 1.2 x 1.7 m Weight: approx. 800 kg Equipment - 3-axis active HEIDENHAIN digital display - Spindle brake - Fixed angle table - Vertical milling head - Operating instructions - Coolant unit - Adjacent switch cabinet - Chip tray for placing on the machine base Dm8y0z All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1978, x-travel 390/400 mm y-travel 210/220 mm z-travel 390/400 mm turning speeds 25-2500 U/min feed 8-400 mm/min rapid traverse 1500 mm/min quill stroke 100 mm tool taper Sk 40 x S 20 x 2 drive motor 2,0/3,0 kW total power requirement kW weight of the machine ca. 1,2 t dimensions of the machine ca. m Optical condition: good Mechanic: good The machine can be viewed under current. 2202 11050 380 V, 50 Hz, with CEE plug and cable Color green Equipment: * 3 Axis Active Digital Display (HH) TNC 113 * Vertical head Sk 40 * Coolant device * Centralized lubrication pump Bax8v0w9lt7 * Free-running safety wheels * Stepless feed * Emergency stop switch * Engine brake * New scrapers * New bellows * Great maintenance done * Lockable main switch * 10 tool holders * fixed angle table (planed) * Chip tray * 4 machine shoes * Cold light lamp * Instruction manual, spare parts list, circuit diagram * Control key u. driver ring Machine is workshop tested and with electrical acceptance protocol!

Condition: good (used), For sale is a Deckel Fp 1Aktiv in a well-kept condition. Viewing by arrangement, please contact us if you have any further questions. Maoc9x9tix

Condition: used, Milling machine Deckel FP3NC Manufacturer: Deckel Type: FP3NC Control: Dialog 4 Condition: used travels: X 400 / Y 400 / Z 400 mm quill stroke: 80 mm Speed: 40 rpm. Up to 3600 rpm. Swiveling milling head. Hydraulic tool holder vertical/horizontal SK40, the dividing head on the table is not included. Benh0p0mxxa

Condition: excellent (used), Year of construction: 1980, Tool milling machine cover FP3 *partly overhauled* Stock number: 07-07-085 Cgv0l9ndnq Machine data: Year of construction: approx. 1980 L x W x H: approx. 2000 x 1600 x 1900 mm Weight: about 1500 kg Machine is in very good used condition Delivery time on request - subject to prior sale Machine partly overhauled Technical specifications: Digital display: 3 - axis - digital display *NEW* traverse paths: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Spindle: Speed ​​range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & Rapids: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Accesories: -Vertical & horizontal milling device -drilling quill -Coolant device -Complete machine documentation -Various wrenches -Horizontal - Spindle Top Cap -Safety handwheels -3-axis digital display *NEW* -Machine feet -Tilt/swivel table -Electrical protective device *NEW* -Work light *NEW* -Transport, installation & commissioning optional Further accessories on request Price and other technical data on request

Condition: used, Year of construction: 1976, x-travel 400 mm y-travel 220 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 25 - 2500 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min creep feed 4 mm/min control Heidenhain TNC 113 total power requirement 4,4 kW weight of the machine ca. 1500 kg dimensions of the machine ca. 1,6 x 1,2 x 1,8 m Condition: ready for operation Video(s) available on our website. Electric 380 Volt Switch gear cabinet ( separate ) Angle table ( fixed ) 700 x 330 mm Taper diverse Bellows with slats of aluminium Protection cabin bottom tray Machinefeets with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Bn7seodn Machine dealer with own stock of 1600 m².

Condition: used, Cover FP1 Active milling machine Traverse path X-axis: 300mm Y-axis travel: 160mm Z-axis travel: 340mm Mounting: SK 40 with tightening thread Feed X-axis: 290mm Y-axis feed: 150mm Feed Z-axis: 330mm Control: Heidenhain Gressel vice Clamping surface: 600mm x 210mm Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Hydylkpy Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Year of construction: 1975, Available immediately from location : Tool milling machine cover Type FP 3 L year of construction 1975 Table 1000 x 400 mm Mounting SK 40 Spindle speeds 40 - 2000 rpm Travel X / Y / Z 800/ 300 / 400 mm Bii3cvmgo89 Drive 3 kw Feed rates 10 - 500 mm / min Weight 2 to Digital display Zett Mess Hydraulic vice various holders At a price of Euro 4,500 plus VAT ex location

Condition: used, machine/vehicle number: 2820-0419, x-travel:500 mm y-travel:400 mm z-travel:400 (340) mm table surface area:710 x 430 mm turning speed range:40 - 4000 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min milling-head swivable +/-:90° quill stroke:80 mm spindle taper:SK 40 control:Contour 3 Qngph total power requirement:5,5 kW weight of the machine ca.:1,9 kg dimensions of the machine ca.:2 x 1,4 x 1,8 m Deckel Model FP3 A - Spilndle Head can be swiveled 90 ° (Left of Right) - Universal tilting rotary swivel table (Size - 710 x 430 mm - Deckel Contour 3 CNC control Systems. - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Electronic Handwheel for All Axis Control Central Lubricant system, Chip tray with Splash cabin will provide complete protection, clean and safe working Area.

Condition: good (used), Universal milling machine active control Heidenhain. Bicyaie30nu

Condition: excellent (used), Year of construction: 1980, Tool milling machine cover FP3 *partly overhauled* Stock number: 07-07-090 Machine data: Fa8czzqq0 Year of construction: approx. 1980 L x W x H: approx. 2000 x 1600 x 1900 mm Weight: about 1500 kg Machine is in very good used condition Delivery time on request - subject to prior sale Machine partly overhauled Technical specifications: Digital display: 3 - axis - digital display *NEW* traverse paths: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Table clamping area: approx. 800 x 420 mm Spindle: Speed ​​range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & Rapids: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Accesories: -Vertical & horizontal milling device -drilling quill -Coolant device -Complete machine documentation -Various wrenches -Horizontal - Spindle Top Cap -Safety handwheels -3-axis digital display *New* -Tilt/swivel table -Work light *New* -Machine feet -electric milling spindle protection *optional* -Transport, installation & commissioning *optional* Further accessories on request Price and other technical data on request

travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 380 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 1,500 mm/min, rapid traverse Y-axis: 1,500 mm/min, Condition: good (used), Year of construction: 1978, -Training machine in good condition. -Digital readout including shaping head and device for worm thread milling Huzrlrk

Condition: like new (used), Year of construction: 1979, Travels XYZ: 500-300-380mm Spindeltaper: Iso 40 Din2080 Spindelspeeds: 40 tot 2000 Tablesize: 420x800 With Active DRO on 3 axes Heidenhain TNC 113 Angle table Quill hor and vert Powerfeeds and rapids on all 3 axes by means of a DC motor D7sq0lk Motor 3 Kw YOM 1979 380 Volt 3ph The machine is PRISTINE Original paint It has hardly seen any use

feed length X-axis: 500 mm, feed length Y-axis: 300 mm, feed length Z-axis: 380 mm, spindle speed (min.): 2,000 rpm, Condition: ready for operation (used), Year of construction: 1979, machine/vehicle number: 3354, sony 3-axis viewfinder universal table Cyysgvsr tools

Condition: used, Year of construction: 1990, machine/vehicle number: 2803-2023, x-travel:400 mm y-travel:400 mm z-travel:340 mm table surface area:700 x 460 mm turning speed range:40 - 4000 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min milling-head swivable +/-:90° quill stroke:80 mm spindle taper:SK 40 control:Dialog 4 total power requirement:5,5 kW weight of the machine ca.:1,9 kg dimensions of the machine ca.:2 x 1,4 x 1,8 m weight of the machine ca.:1,9 t Cbskvw8aw2 Deckel FP3 NC Milling Machines. - Spilndle Head can be swiveled left or Right (90 °) - Angular Fixed Work Table: 700 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Electronic Handheld for Easy Axis movement - Deckel Dialog 4 CNC control Systems, Central Lubricant system, Chip tray with Splash cabin

Condition: not inspected (used), Bundle 3qwmpc3zzh 2 x DECKEL inclined bed FP 3 L + 4 L

Condition: excellent (used), Year of construction: 1980, Tool milling machine cover FP3 *partly overhauled* Stock number: 07-07-089 Machine data: Year of construction: approx. 1980 L x W x H: approx. 2000 x 1600 x 1900 mm Weight: about 1500 kg Machine is in very good used condition Delivery time on request - subject to prior sale Machine partly overhauled 7b9s083q Technical specifications: Digital display: 3 - axis - digital display *NEW* traverse paths: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Table clamping area: approx. 800 x 420 mm Spindle: Speed ​​range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & Rapids: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Accesories: -Vertical & horizontal milling device -drilling quill -Coolant device -Complete machine documentation -Various wrenches -Horizontal - Spindle Top Cap -Safety handwheels -3-axis digital display *New* -Tilt/swivel table -Machine feet -Work light *New* -electric milling spindle protection device *optional* -Transport, installation & commissioning *optional* Further accessories on request Price and other technical data on request

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 2102-2783, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2783. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm E2ma0uq - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - Automatic central greasing - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways disambled, checked and are in excellent condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - workshop tested machine no.: 2101-0682 geometric acceptance with test report accessories: - 3-axis active digital readout HEIDENHAIN with active function in X and Z axis - Universal table 600 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Counterholder with bearing block - Coolant device Jhaujf77ub - Central lubrication electric - Instruction manual - used, as seen but without warranty -

Condition: good (used), Year of construction: 1978, machine/vehicle number: 2201-4621, Functionality: fully functional, Little used training machine TECHNICAL DETAILS longitudinal movement: 490 / 500 mm (automatic / by hand) Vertical movement: 370 / 380 mm (automatic / by hand) speed range, geometrically stepped: 40 - 2.000 rpm Main gear (gear train), number of steps: 18 Clamping surface vertical table slide: 900/255 mm Clamping grooves: Number 3, width 12 mm, distance 90 mm Feed gear Number of feeds: 18 feed range: 10 - 500 mm/min rapid traverse: 1.500 mm/min MACHINE DETAILS space requirement: 5 sqm Dmisoj Weight: 1.100 kg with control cabinet

Condition: good (used), Cover FP 1 with 3 axes - active - digital display Heidenhain rigid angular table >> speed: 40 - 2000 rpm >> feed stepless in 3 axes >> rapid traverse in 3 axes >> drive power .1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle block 100mm movable >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 Kg Accessories Equipment: >> 3 axes digital display Heidenhain TNC111 >> Coolant system Bgli83pyl0i

Condition: used, Year of construction: 1988, x-travel 400 mm y-travel 315 mm Bebspef73o z-travel 400 mm Control Dialog 4 total power requirement 11 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1950 x 1700 x 1400 m

Condition: excellent (used), Year of construction: 1980, Tool milling machine cover FP3 *partly overhauled* Stock number: 07-07-086 Machine data: Year of construction: approx. 1980 L x W x H: approx. 2000 x 1600 x 1900 mm Weight: about 1500 kg Machine is in very good used condition Delivery time on request - subject to prior sale Machine partly overhauled Technical specifications: Digital display: 3 - axis - digital display *NEW* traverse paths: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Spindle: Speed ​​range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & Rapids: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Accesories: -Vertical & horizontal milling device -drilling quill -Coolant device -Complete machine documentation -Various wrenches Cbpjolkrqt -Horizontal - Spindle Top Cap -Safety handwheels -3-axis digital display *New* -Machine feet -Tilt/swivel table -Work light *New* -Electrical milling spindle protection device *New* -Transport, installation & commissioning *optional* Further accessories on request Price and other technical data on request

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, for sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly distinguished by its ease of operation. This newer version from year of manufacture 1989 has among other things a central lubrication, an electric coolant pump and a machine lamp. The machine has been extensively overhauled in our workshop and is therefore in excellent condition. You can convince yourself of this on site. In the course of the partial overhaul, among other things, the following work was performed: - Spindle bearing of the milling head renewed - Repainting - Various standard parts such as handles, oil sight glasses, keys etc. renewed - Wear parts like drive belts etc. renewed - Bellows partly renewed - V-guides adjusted - and much more... Delivery time: immediately year of manufacture: 1989 Machine No. 2102-xxxx Table: rigid angle table travels: X300mm/Y160mm/Z340mm quill stroke: 60mm Connected power: 1,9KW number of spindle speed: 16 Speed range: 40-2000 rpm Dlp00n tool holder: SK40 feed rate: stepless 5-500 mm/min rapid traverse: 1200mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet Bfwi0c0sjbd Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and possibly worn parts are exchanged in advance - On request, we overhaul the selected machine completely or in part - If desired, they can order additional accessories such as tools, etc. directly with - On request we can mount further accessories like safety devices etc. for you - Gladly we take care of the dispatch and/or the bringing in

Condition: refurbished (used), Year of construction: 1982, Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated Be20dd2nanr - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 2102-2641, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2641. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system Bnrnrz3env - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: excellent (used), Year of construction: 1980, Universal milling machine Deckel FP2 with 3 - axis active - TNC 113 digital display Heidenhain and stepless feed in TOP condition Bc987oamnjp Technical data: >> Year of manufacture 1980 Machine No.2202-11621 >> Rigid angular table (new planed) >> Speed: 25 - 2500 rpm >> feed stepless in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,2 KW >> spindle brake >> Travels X/Y/Z: 400/220/400 mm >> Vertical milling head movable on spindle stand 150mm >> Vertical quill and horizontal quill - SK40 extendable >> Pulling system S20x2 >> weight approx. 1400 Kg Accessories and equipment: >> 3 axes TNC 113 active digital display Heidenhain >> Coolant system >> Central lubrication To the machine : Offered is a universal milling machine Deckel FP2 in a very good original condition. The FP2 comes from a laboratory of a state enterprise where it was only little used. The machine has very little crank play and all spindles can be moved easily. Even at the highest speeds, the milling machine runs smoothly. On this newer FP2 model, the feed is infinitely variable in three axes, and the machine has a rapid traverse for each axis. A big advantage is the active 3 axis digital display. With this Heidenhain route control you can enter dimensions that the machine automatically approaches. An oil change has been done. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more accurate. Take the opportunity to visit this machine on site under power and try it out.

Condition: used, Year of construction: 1988, x-travel 400 mm y-travel 315 mm Bgcmsdftwur z-travel 400 mm Control Dialog 4 total power requirement 11 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1950 x 1700 x 1400 m

Condition: used, Year of construction: 1979, x-travel 300 mm y-travel 160 mm z-travel 340 mm spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min creep feed 4 mm/min control Heidenhain TNC 113 total power requirement 1,6/2 kW weight of the machine ca. 570 kg dimensions of the machine ca. 1,2 x 1 x 1,75 m Video available on our website. Condition: ready for operation Bu88cjg8iy Electric 380 Volt Switch gear cabinet ( separate ) Angle table ( fixed ) 600 x 210 mm Taper Opposite bearing for horizontal milling unit Bellows with slats of aluminium with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 1992, Dear Sir or Madam, for sale is a very well maintained Deckel FP1 with 3-axis TNC113 active control, which is particularly characterized by its ease of operation. This newer version from 1992 has among other things a central lubrication, an electric coolant pump, as well as a control cabinet which can be disconnected from the machine by means of a plug in no time. The machine has been technically inspected in our workshop and is therefore in excellent condition. You can convince yourself of this on site. Delivery time: immediately year of manufacture: 1992 Machine no. 2102-xxxx Table: rigid angle table travel: X300mm/Y160mm/Z340mm quill stroke: 60mm Connected power: 1,9KW Number of spindle speed: 16 speed range: 40-2000 rpm Dlp00n Tool holder: SK40 feed: stepless 5-500mm/min rapid traverse: 1200mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and possibly worn parts are exchanged in advance - On request, we overhaul the selected machine completely or in part - If desired, they can order additional accessories such as tools, etc. directly with - On request we can mount further accessories like safety devices etc. for you - Gladly we take care of the dispatch and/or the bringing in

Condition: good (used), Year of construction: 1979, Deckel universal milling machine FP3 - 2201, in excellent condition, all original with accessories. Speeds up to 2500 rpm. D7rhivk

Condition: used, Year of construction: 1979, x-travel 490/500 mm y-travel 290/300 mm Bhm9ngdx z-travel 370/380 mm turning speeds max. 2500 U/min feed 10-500 mm/min rapid traverse 1500 mm/min quill stroke 100 mm tool taper Sk 40 x S 20 x 2 drive motor 3,0 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m Mechanic: good Optical condition: good The machine can be viewed under current. Heidenhain digital readout, axes: 3 central lubrication 2201 4643 The machine is not ready for sale at the moment, because of this the technical datas can deviate! The pictures as not original, but they correspond almost the condition. As soon as the machine is ready through our workshop, we will sent ot you our detailled offer with original pictures! with CEE plug and cable colour: green RAL 6011 accessories: * 3-axis activ Heidenhain digital monitoring * vertical head Sk 40 * cooling equipment * bath tube for shavings waste * lubrication pump * angle table fix 800 x 420 mm * about 10 clamping tools own choice * machine lamp operating instruction, spare parts list, electrical circuit, operating key, machine is checked in our workshop and has an electrical acceptance protocol!

Condition: like new (used), Year of construction: 1985, Universal milling machine Deckel FP1 with 3 - axis - active digital display TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier very good CONDITION Technical data: >> Year of manufacture 1985 Machine-No. 2102-2891 >> rigid angular table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> spindle brake >> Travels X/Y/Z: 300/160/340 mm Bb9jg7spvfk >> Vertical milling head can be moved 100mm on spindle block >> Vertical quill and horizontal quill - SK40 >> Pulling system S20x2 >> weight approx. 800 Kg Accessories and equipment: >> 3 axes digital display Heidenhain TNC111 >> Coolant device >> Operating manual, spare parts plan To the machine : Offered is universal milling machine Deckel FP1 Year 1985 in very good condition. The FP1 was overhauled in 2008 at the company Huttelmaier. The machine has very little crank play and all spindles can be moved easily. Even at maximum speeds, the milling machine runs very smoothly. In this newer FP1 model, the feed in three axes is infinitely variable, furthermore, the machine has rapid traverse in these axes. A big advantage is the active 3 axes digital display. With this Heidenhain route control you can enter dimensions that the machine automatically approaches. The FP1 was in a training company, where it was used only occasionally. An oil change has been done. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more accurate. Take the opportunity to inspect and try out this sweetheart on site under power.

Condition: good (used), Universal milling machine Deckel FP4M Active Manufacturer: Deckel Type: FP4M Active Condition: used, good digital display: 3 - axis digital display Heidenhain travels: X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm table clamping surface: approx. 700 x 400 mm speed range: approx. 50 - 2500 rpm tool holder: ISO 40 drive power: approx. 6,0 kW feeds & rapid traverse: in all 3 axes Wkwupook feed range: approx. 8 - 630 mm/min rapid traverses: approx. 3.0 m/min L x W x H: approx. 2300 x 1800 x 1800 mm weight: approx. 1750 kg Accessories - central lubrication, manually operated - coolant device

Condition: used, Year of construction: 1960, x-travel 300 mm y-travel 160 mm z-travel 300 mm table surface area 500 x 200 mm size of template table 550 x 325 mm transmission ratio 1 : 1 bis 1 : 50 milling spindle speed 1.600 - 20.000 U/min workpiece weight max. 100 kg total power requirement 0,25 kW weight of the machine ca. 255 kg dimensions of machine L x W x H 0,95 x 0,90 x 1,24 m Accessories: rolls engraving device DECKEL, GVW 100; 1 letter and number stencil set each Glyj3sd

Condition: excellent (used), Year of construction: 1986, Dear Sir or Madam, herewith we offer you very well maintained milling machines type Deckel FP4M or FP4M(K) active. The machine is at least technically tested in our workshop and is therefore fully functional. About their inquiry we are very pleased ! Delivery time: on request Machine no. xxxx-xxxx year of construction: xxxx Table design: rigid speed: 50 - 2500 rpm feed: 8 - 630 mm/min rapid traverse: 1300mm/min drive power: 3,7kW / 4,4kW rapid traverse: 1300mm/min traverse X/Y/Z: 500/400/400mm tool holder: SK40 Tightening system: M16 or hydraulic quill stroke vertical: 90mm weight: approx. 1,6t Further equipment and accessories: on request Eo0pngkh Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and possibly worn parts are exchanged in advance - On request we will overhaul the selected machine completely or partially - About the paint color of the selected machine, they can decide freely - On request you can order further accessories like tools etc. directly - On request we can mount further accessories like safety devices etc. for you - Gladly we take care of the shipping and / or installation

Condition: used, Year of construction: 1970, x-travel 800 mm y-travel 300 mm z-travel 400 mm tool taper SK 40 fixed table 400 x 1000 mm addition table 260 x 1000 mm turning speed range 40 - 2000 U/min Uwrvwwx0 feed range 10 - 500 mm/min total power requirement 3 kW weight of the machine ca. 2000 kg dimensions of the machine ca. 1775/1880/1850 mm • fixed angle table, • 5 tool tapers

Condition: used, Pre - Info: Nr. 5152 DECKEL FP 4 M / 2203 500 x 400 x 400 Cfuwftrbqc

Condition: like new (used), Universal milling machine Deckel FP4M with 3 - axis active - digital display Heidenhain Super condition !!!! Technical data: >> Year of manufacture ca.1990 Machine-No.2203-7624 >> Rigid angular table (new revised) >> Speed : 50 - 2500 rpm >> Feed rate : 8 - 630 mm/min >> drive power .:3,7 / 4,4 KW >> spindle brake >> rapid traverse 1300 mm/min >> travels X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on spindle stand >> Vertical quill and horizontal quill - SK40 >> vertical quill 90mm extendable >> Hydraulic tightening system >> Weight approx. 1600 Kg Accessories and equipment: >> 3 axes active digital display Heidenhain >> Coolant device >> chip tray >> Electric central lubrication >> Operating instructions, spare parts diagrams, To the machine : Offered is a universal milling machine Deckel FP4M Aktiv in a very good condition. The machine has very little crank play and all spindles can be moved easily. Even at maximum speeds, the milling machine runs quietly. The machine has hydraulic tension. The FP4M was only occasionally used in a government operation for training. On this newer FP4 model, the feed is continuously variable in three axes, furthermore the machine has a rapid traverse for each axis. A big advantage is the active 3 axis digital display. With this Heidenhain route control you can enter dimensions that the machine automatically approaches. An oil change has been done. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more accurate. Take the opportunity to visit this machine on site under power and try it out. Frzkmtlx3v

Condition: excellent (used), Nr. 3106 Brtql8hjzy Dreh- Schwenk- und Kipptisch 520 x 1000 Fabr. DECKEL Typ 2314 Datenblatt anbei

Condition: excellent (used), Universal milling machine Deckel FP3 in special painting with 3 - axis digital display K&C NEW Technical data: >> Year of construction ca.1975 Machine-No. 0750 >> turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed and rapid traverse in 3 axes >> drive power .:3 KW >> Travels X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle Dkys2r >> Vertical quill and horizontal quill extendable - SK-40 >> Pulling system S20x2 >> Weight approx. 1300 Kg Accessories and equipment: >> 3 axes digital display K&C Newly assembled with manufacturer's warranty and operating instructions. Display unit: reference points, set zero points, enter coordinates, mm/ inch switching, absolute or incremental coordinates, circle functions, hole lines, radius milling functions, etc. >> Coolant system >> Central lubrication To the machine : Offered is a universal milling machine Deckel FP3 in a very good condition .All spindles can be moved easily .The machine was completely disassembled and repainted .The bellows are new. The milling table was newly planed. An oil change has been done. Mechanically and electrically tested. The new digital display from K&C makes working easier and even more accurate. Take the opportunity to inspect and try out the lids on site under power.

Condition: excellent (used), Year of construction: 1992, Universal milling machine Deckel FP4M with 3 - axis active - digital display Heidenhain Super condition !!!! Cgrwelfyfz Technical data: >> Year of manufacture 1992 Machine-No.2203-8165 >> Rigid angular table (New planed) >> Speed : 50 - 2500 rpm >> Feed rate : 8 - 630 mm/min >> Drive power .:3,7 / 4,4 KW >> spindle brake >> rapid traverse 1300 mm/min >> travels X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on spindle stand >> Vertical quill and horizontal quill - SK40 >> vertical quill 90mm extendable >> Hydraulic tightening system >> Weight approx. 1600 Kg Accessories and equipment: >> 3 axes active digital display Heidenhain >> Coolant device >> chip tray >> Electric central lubrication >> Operating instructions, spare parts diagrams, To the machine : Offered is a universal milling machine Deckel FP4M Aktiv in a very good condition. The machine has very little crank play and all spindles can be moved easily. Even at maximum speeds, the milling machine runs quietly. The machine has hydraulic tension. The FP4M was only occasionally used in a government operation for training. On this newer FP4 model, the feed is continuously variable in three axes, furthermore the machine has a rapid traverse for each axis. A big advantage is the active 3 axis digital display. With this Heidenhain route control you can enter dimensions that the machine automatically approaches. An oil change has been done. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more accurate. Take the opportunity to visit this machine on site under power and try it out.

Condition: like new (used), Universal milling machine Deckel FP3 with 3 - axis digital display Heidenhain TOP Technical data: >> Year of construction ca.1975 Machine-No. 0571 >> Rigid angular table >> Speed: 40 - 2000 rpm >> feed and rapid traverse in 3 axes >> Drive power .:3 KW >> Travels X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Pulling system S20x2 >> Weight approx. 1300 Kg Accessories and equipment: >> 3 axes digital display Heidenhain ND 550 Bm73u70y >> Coolant system >> Central lubrication To the machine : Offered is a universal milling machine Deckel FP3 in a TOP condition. The machine has very little crank play and all spindles can be moved easily. Even at maximum speeds, the milling machine runs very smoothly. The bellows are all new. The cover was overhauled according to the previous owner, this is also evident from the condition and geometry of the machine. The digital display from Heidenhain makes working easier and even more accurate. An oil change was carried out. Mechanically and electrically tested. Take the opportunity to inspect and try this machine on site under power.