5-axis milling machine

CMS NC ARES 36/18 TUCU

Condition: used, Year of construction: 2002, Functionality: limited functionality, machine/vehicle number: 2776, travel distance X-axis: 3,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: OSAI, controller model: 10 SERIES, total length: 8,200 mm, total width: 7,300 mm, input voltage: 415 V, type of input current: three-phase, CMS 5 Axis NC-PMB36 3500mm x 3000mm Table Gantry CNC Machining Centre (Year 2002) Table 3510mm Long x 3000mm wide OSAI 10 Series CNC Control Under Power and can be Viewed Machine details Manufacturer: CMS (Zogno, Bergamo, Italy) Model#: SPA-1-24-019 Serial#: 2776 Maximum machine envelope is 3500mm x 3500mm x 1200mm. 5 Axis: X, Y, Z B, C Klelhcdwsvdvcko Aet The maximum part size is dependant on the part geometry and head position. Typical tolerance per axis is ±0.05mm Polyurethane block, epoxy block, wood and composite materials can be machined to complex profiles. Programming is carried out off-line on Catia v5 CAM software or at the machine by direct NC input or by using the ‘teach’ functionality Floor Space Required including Cages 7.3 x 8.2 including cage. Location: NORTHERN IRELAND Note: Experiencing issue with B-Axis not referencing, have been told by Engineer that it needs an encoder

Condition: ready for operation (used), Year of construction: 1999, Functionality: limited functionality, machine/vehicle number: 2092, travel distance X-axis: 36,000 mm, travel distance Y-axis: 5,800 mm, travel distance Z-axis: 1,250 mm, feed length X-axis: 36,000 mm, feed length Y-axis: 5,800 mm, feed length Z-axis: 1,250 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, controller model: NUM 1060 W, workpiece length (max.): 34,000 mm, workpiece width (max.): 4,500 mm, workpiece height (max.): 240 mm, workpiece weight (max.): 25,000 kg, total height: 4,825 mm, total length: 43,700 mm, total width: 11,855 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 33,000 W, spindle nose: HSK 100F, number of spindles: 1, number of slots in tool magazine: 18, tool length: 400 mm, tool diameter: 750 mm, tool weight: 20,000 g, Equipment: rotational speed infinitely variable, CNC large joinery portal (manufacturer CMS, type "NC-PMC36-TUCU", year of manufacture 1999) for the processing of large-format solid wood components (glulam and CLT) for sale. The joinery gantry can be used for simultaneous 5-axis processing of large-format timber components up to 34.0 m long and 4.5 m wide. Among other things, this system was used to process the roof girders for the Expo roof in Hanover. The system consists of a massive movable bridge that is moved via guide rails at a maximum speed of 50 m/minute. The processing spindle is mounted on a carriage that enables movement in the Y and Z directions. A fourth axis allows the unit to rotate on the vertical axis, while the fifth axis allows the spindle to be tilted in the vertical plane. Today, the components are positioned on wooden beams in a fixed grid. The components can be machined on three sides using the appropriate sliding wooden blocks. Components with too little weight are fixed with screws during processing. Positioning is carried out using a laser system, which is not included in the scope of delivery. However, new laser systems can be implemented relatively easily. The system is currently controlled via a CAM system from Siemens. The CAM software is not included in the scope of delivery. However, all standard CAM systems can be used by adapting the post-processor. The vacuum system for fixing the components described in the enclosed order confirmation is not included in the scope of delivery. The system is extremely robust and solid and has provided good service for over 25 years. It can be inspected during operation. The guide rails, the bridge, the spindle and the entire mechanical design cannot be more robust and solid, even in new, comparable systems. However, it is recommended that the system be completely overhauled by means of a retrofit in order to comply with current safety regulations. Appropriate specialist companies can be named. The machine is to be handed over in April 2025 and dismantling should ideally be carried out by the buyer. However, only a limited time window is available for this. Kljlhcdwsvitzzo Aot

Condition: new, Year of construction: 2022, Functionality: fully functional, 5-axis CNC machining center for processing carbon and glass fiber workpieces, plastics, Ureol, wood. Availability: approx. 4 weeks Klolhceiqnzzodw Ajt Machine details: CMS ARES 3618 - Axis travels: X-axis: 3,600 mm Y-axis: 1,800 mm Z-axis: 1,200 mm B-axis: +/- 120 ° C-axis: +/- 270 ° - Universal tool head (12 kW | max. speed: 24,000 rpm) - Tool magazine: 8-station in-line magazine moving in X-direction - Tool holder: HSK 63F - CNC control: Fanuc 31 IB5 - Vacuum system: 2 x 100 m³/h - Work area cover, pendulum operation, tool measuring system, dust protection, ... Additional services: Installation, commissioning, training possible!

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 970 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 70 m/min, controller model: Fanuc, spindle speed (min.): 24,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 12,000 W, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: documentation/manual, CMS ARES 3618 PX5 model 5-axis CNC machining center. Cartesian suspended post construction. Brushless servomotors, rack and pinion systems, guideways with preloaded recirculating ball bearing pads. X 3600mm 80m/min Y 1800mm 80m/min Z 970mm 70m/min C 540° 30rpm A 315° 30rpm Fixed table with suction table. Kolsuhwl Aohcdw Ajlt Head with 12kW electrospindle at 24,000 rpm max with 20-position automatic tool changer and HSK F63 attachment. Fanuc 18ì-MB5 NC Automatic grease lubrication. Supply voltage 3 x 400V / 50Hz (+/-5%). Supply pressure 6 bar. Used machine in good condition, fully retrofitted internally.

Condition: used, Year of construction: 2002, Functionality: fully functional, 5-Axis CNC Machining Center Machine Details: CMS PK 36 - Axis Travels: X-Axis: 3,600 mm Y-Axis: 1,600 mm Z-Axis: 1,200 mm B-Axis: +/- 120° C-Axis: +/- 270° - Universal Tool Head TUCU (6 kW | Max. Speed: 27,000 rpm) - Tool Magazine: 1 moving inline magazine in the X direction with a total of 8 stations - Tool Holder: ISO30 - CNC Control: Osai - Vacuum System: 2 x 100 m³/h Klolhcdsv Iztijw Aet - Vacuum Connections, Shuttle Operation (2 Vacuum Zones), ... Additional Services: Installation, Commissioning, Training Available!

Condition: used, Year of construction: 2012, operating hours: 25,400 h, Functionality: fully functional, machine/vehicle number: 6316, travel distance X-axis: 4,800 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 4,800 mm, feed length Y-axis: 2,600 mm, feed length Z-axis: 1,200 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 55 kVA, controller manufacturer: Heidenhain, controller model: ITNC 530, workpiece length (max.): 4,800 mm, workpiece width (max.): 2,600 mm, workpiece height (max.): 1,200 mm, workpiece weight (max.): 4,500 kg, total height: 4,500 mm, total length: 7,000 mm, total width: 4,700 mm, table width: 4,880 mm, table height: 1,700 mm, table length: 2,370 mm, rotational speed (max.): 18,000 rpm, Bed Dimension 4,880mm x 2,370mm. (10 'T' Slots 12mm). Bed to Bridge 1,730mm. Bed to Tool Rack 1,320mm. Bed to Spindle Nose 1,150mm. Vacuum Table unit. Becker Vacuum Pumps. Spindle Taper HSK F63. 16 Position Carousel. 8 Position Onboard Rack. Maximum Spindle Speed 18,000 RPM. Max Power 27KW. S/No. 6316. Air Cooling System and Extraction. Texa Machine PSU Climate Control (63A). Renishaw RMIV2 Spindle Probe and Marpos Mida TS30 Tool Probe. Modello CHR1,3 Spindle Chiller. Machine Footprint W7,000mm x D4,700mm x H4,500mm. Klslhcdwsumup Rj Ajt Machine Weight. Note: Tooling is not included.