Electric motor 38 kW 1465 U/min

AEG A38/4

Condition: good (used), electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 90 LZ 4 -Power: 1.5 KW -Speed: 1400 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Dimensions: 310/200/H225 mm Um9Xkrqxo -Weight: 19.1 kg

Condition: defective spare-parts repository (used), Year of construction: 1975, power: 110 kW (149.56 HP), rotational speed (min.): 1,480 rpm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 790 kg, protection type (IP code): IP44, Capacity: 110 kW Driving speed: 1480 rpm Cr37Uc0K

Condition: ready for operation (used), AEG KAMHE 90L 4 IE2 three-phase motor SN:9000069-003L-006 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Dppqmr

Condition: good (used), Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 3/4 -Power: 3,0 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm Scnkrkrtsn -Design: B3 -Dimensions: 460/300/H280mm -Weight: 57 kg

Condition: used, Three-phase motor with 2 speeds, electric motor -Power: 1.7/6.4 kW -Speed: 720/1460 rpm Xxpqrldvc -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 44 -Dimensions: 490/315/H260 mm -Weight: 58 kg

Condition: used, Electric motor, three-phase motor -Power: 5.5 kW 23C29Owpn -Speed: 1430 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: -Price: per piece -Number: 1x available -Dimensions: 400/340/H350 mm -Weight: 52 kg

Condition: used, Bench drill, stand drill, pillar drill, column drill -Spindle holder drill chuck: 4 mm -Clamping table: O 125 mm - Projection: 105 mm -Speeds: 1400 rpm -Pillars diameter: 41 mm -Spindle stroke: 55 mm -Motor power: 75W K8Wpooay -Dimensions: 290/150/H530 mm -Weight: 13.4kg

Condition: used, Three-phase motor, electric motor -Power: 1.3 / 2.6 kW -Speed: 710/1410 rpm -Shaft: Ø 28 x 60 mm Giww2Bz -Construction: B5 -Protection class: IP55 -Dimensions: 380/270/H250 mm -Weight: 32 kg

Condition: used, NH fuse -NT 4 -1000 A 500 VAC -Price: complete -Number: 2 pieces -Weight: 4 kg 7A2Mzo7X

Condition: good (used), Year of construction: 2012, Good working hot melt glue unit. Greedm3Jq Tank capacity 4 liters NI120 (Nordson compatible) Suitable for 2 hose connections Unit comes with a good working spare glue pump

Year of construction: 1987, Condition: like new (used), machine/vehicle number: 2008, ID AG 11 PEINER GREIFER Producer: Salzgitter Machinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Product MMGL2000-4, degree of protection IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, content 2.0 m3 Mainly used in port operations as well as in waste incineration plants, steelworks and scrap yards The gripper type is suitable for handling scrap, ingots, rubbish, biomass and woodchips, among other things The PEINER grab volume corresponds to the internal volume when the trays are closed - the actual total payload is greater Worldwide service network PEINER are designed for cranes with power supply. Depending on your individual crane equipment, the gripper can either be attached directly to slewing gears or traverses. EFFICIENCY - multi-shell design for various goods handled: Example wood chips: Maximizing the filling volume with the least possible transport loss. Equipped with the latest shell design, PEINER MMGL are ideally suited for handling wood chips. They show perfect penetration, achieve an optimal filling volume and close cleanly. PERFORMANCE - High turnover volumes per loading cycle: Motorized orange peel grabs adapt to the material being handled with their individually driven shells. Transport losses are minimized. Optimal construction height, low center of gravity and the robust construction offer universal application possibilities of the PEINER MMG / MMGL series. PEINER MMG / L have extremely short opening and closing times and thus optimize the number of possible loading cycles per hour. ECONOMIC EFFICIENCY - Low service costs: The maintenance points are easy to reach. In order to increase the operating times and to minimize the service effort, PEINER can be equipped with automatic central lubrication. RELIABILITY - your investment in the future: PEINER are the result of many years of experience in bulk handling, high quality components and modern manufacturing standards. Sales price 9.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / B0Yot2C9Yq Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, Planing width 220 mm 6 heads with universal .Controlled from a portable console .The machine has safety guards . Dppuit

Condition: excellent (used), Spindle / Spindle 3,5 - 16 - 10 kVA Bgiywmvk0En 2750 - 14660 - 23660 rpm

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm with Müdata, Mütrans, without gate, super clean from Germany 2nd hand NF42 in 4/42mm from 1988-1990 E9Zodvmsz AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro

Condition: used, Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 480/310/H270 mm -Weight: 70 kg Ef7Cldcwk

Condition: used, Electric motor, three-phase motor -Power: 4 kW -Speed: 2880 rpm Yr7Q9F2L0 -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 380/300/H255 mm -Weight: 28.5 kg

Condition: used, Electric motor, three-phase motor Ys8Mdi8Gb -Power: 4 kW -Speed: 2870 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 8x engines available from Ecoair -Number: 24x motors available from AEG -Price: per piece -Dimensions: 370/277/H250 mm -Weight: 28 kg

Condition: used, Three-phase motor, electric motor -Power: 4 kW -Frequency: 60 Hz -Speed: 3440 rpm Xygtbmy0Q -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 385/250/H300 mm -Weight: 25 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 4 rpm -Power: 0.09kw -Construction: B3 angle Bhl2Povjm -Diameter shaft: Ø 18 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 290/230/H205 mm -Weight: 10kg

Condition: excellent (used), Rotary oven with 4 trolleys 600x800 OK TECH -Brand: OK TECH -Model: B-2200 AG 1-2 -Origin: Denmark -External dimensions (LxWxH): 3378x2667x2540 mm -Capacity: 2 trolleys 1200x800 mm or 4 trolleys 600x800 mm -Control system: Intuitive touchscreen -Trolley dimensions (LxWxH): 800x660x1907 mm -Maximum temperature: 300°C -Installed power: 6.2 KW -Power supply: 3x400 V / 230 V / 50 Hz -Recommended stabilizer: 1 KVA / Phase -Minimum opening for installation: 2500x1500 mm -Oven weight: 4000 kg Production capacity: -Baguettes 250 g: 2160 pieces/h -Bread 400 g: 1680 pieces/h (672 kg/h) -Rolls 45 g: 5040 pieces/h (226 kg/h) Cqmf70W7Cu -Biscuits: 224 kg/h - 268 kg of dough -Sponge cake: 600 kg/h - 720 kg of dough -Rusk (requires two baking cycles): 112 kg/h - 179 kg of dough -Khari (requires two baking cycles): 68 kg/h - 108 kg of dough

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights height 3,000 mm with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. Bhdwvxp7Zg The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights height 3,500 mm with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Ibkj8N9 - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Bfvqg039Uj According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights height 2,600 mm with base section 1,000 mm 12 cantilever arms with 1,000 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) Bfr8Aplf7D - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights height 2,600 mm with base section 1,000 mm 12 cantilever arms with 1,000 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Bb2Felr For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.