Used turning automatic lathes for sale (208)

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, CNC sliding headstock automatic lathe Make: STAR Model: SR-20 Year: 1998 with: FANUC 16-T control Back side machining Synchronised spindle Driven tools C-axis Lhjdpfxjy Hg Hde Adweg Bar feeder magazine FMB TURBO 3-26

Condition: excellent (used), Year of construction: 2019, operating hours: 9,243 h, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 200 rpm, overall weight: 3,600 kg, bar passage: 32 mm, We are offering the following used Tsugami HS327: Machine Type: CNC Lathe Model: HS327 Serial Number: 10147A Weight: 3600 kg Year of manufacture: 10/2019 Lhsdpoy Nig Ejfx Adwog Commissioning: 07/2020 Operating hours: 9,243 (as of 06.05.2026) Machining time: 5,991 (as of 06.05.2026) Equipment: - Fully programmable B-axis - Total of 9 axes - Control: FANUC System 32i-B - Bar feeder: FMB turbo 3-36 HD / SFB-310 ECO (with high-pressure unit) - Fire extinguishing system: Kraft & Bauer FB 703 - Chip conveyor: Hakusan EKC 2052HP Special accessories: - Sub-spindle flushing including pneumatic ejector - B-axis swivel angle 135 degrees – fully programmable - High-pressure pump 16 bar including dual cartridge filter - 2 deep-hole drilling tools beside the sub-spindle - 8 driven tools on the B-axis tool carrier - 4 driven tools on the rear side - 1 driven angle head 90 degrees for the rear side - 4 fixed tool spindles on the rear side The machine is in excellent condition, has always been run with oil, and will be available from July 2026. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2007, Tornos Deco Sigma 20 Sliding Head Lathe, Twin Spindle 6 Axes & 2 C Axes, Spindle 1 - Main, Collet Chuck, 10,000rpm Max, 20mm Max Workpiece Diameter, Serviced by 6 Turning Tool Positions, 4 Side Mill/ Drill Positions, 2 Drive Capable, 4 End Mill Positions all Driven, Spindle 2 - Sub, Collet Chuck, 10,000rpm Max, 20mm Part Diameter Max, Serviced by 5 Turning Tool Positions, 2 Mill/Drill Positions Driven, Parts Catcher & Chute, Fanuc Series 31i Model CNC Control, Tornos Robobar SBF-532 Barfeed, 3000mm Max Bar Length, (820kg). S/No. 8277 (2007). Country of Origin: Switzerland Lhodsy Idcfspfx Adweg

Condition: used, Year of construction: 2000, functionality: fully functional, 2 units Citizen M16 sliding head lathes, year 2000 with FMB bar feeder. For sale are two identical Citizen M16 CNC sliding headstock lathes from the year 2000. Including bar feeder. Condition: Good used. Max. diameter: 16 mm. Machines are still in operation and can be inspected. Machines are sold individually or as a package. If interested, please send your offer or a message for further details or to arrange a viewing appointment. Ledpoy H Sf Sefx Adwehg

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. Lhodpem E I D Hefx Adwjg loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: ready for operation (used), Year of construction: 2017, overall weight: 4,100 kg, total width: 1,345 mm, total height: 1,780 mm, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: 32i-B, product length (max.): 2,690 mm, number of axes: 7, This 7-axis STAR MICRONICS SR-32JII-typeA was manufactured in 2017. It features a bar capacity of Ø32 mm and includes a main spindle and sub-spindle with C axis. The machine is equipped with a synchronized guide bushing and a gang tool plate with 6 positions. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR-32JII-typeA swiss type turning machine we have for sale. Contact us for further details. • Bar capacity: Ø32 mm • Spindles: Main + sub-spindle with C axis • Guide bushing: Synchronized type (Neukomm) • Cross slides: X-Y / X-Z configurationStandard equipment • Pneumatic unit • Safety door lock Lhjdpfxsy Am I Hj Adwsg • Spindle & sub-spindle cooling unit • Coolant tank: 255 L with level & flow control • Automatic lubrication system • Working area lighting • Pneumatic cleaning through sub-spindle • Tool breakage control • Parts conveyor • Electronic handwheel • RS232 / USB interface • CE markingTooling configuration • Gang tool plate with 6 positions • 5 radial tool positions (incl. 3 motorized ER20) • 5 front tool positions (incl. ER16 + ER20) • Motorized backworking plate (6 positions) Additional equipment • High-pressure pre-installation • High-pressure coolant system: 69 bar / 20 L/min • Rear axial drilling/milling unit (ER16) • Chip conveyor • Coolant filtration systemBar feeder • IEMCA BOSS 338/37 HD • Max bar length: 3700 mm • Capacity: Ø38 mmMachine hours; 4,000 hours of work Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2007, Citizen M32-V Mfd. 2007 Hours: 99,608 High Pressure Lhjdpoyzkb Usfx Adweg Mist Collector Chip Conveyor Long work piece attachment No tooling 338 Edge Patriot Loader (Accepts 8ft Bars) Machine came out of an Aerospace Company in Michigan.

Condition: good (used), Year of construction: 2018, KSI TCM 38 CNC sliding headstock lathe, Year of manufacture 2018, Lsdpfeuixvfsx Adwohg Fanuc Oi-TF control system, Bar machining up to 38 mm, LNS XH 552 loading magazine, Counter spindle up to 6,000 rpm, spindle speed main spindle up to 8,000 rpm, 2 x C axis, tools attached, 16 tools, max. turning length 300 mm,

Condition: ready for operation (used), Year of construction: 2012, spindle motor power: 7,500 W, spindle speed (max.): 5,000 rpm, overall weight: 2,500 kg, total height: 1,580 mm, controller manufacturer: FANUC, controller model: na, number of axes: 6, This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for tact us for more information. Machine Benefits Technical Machine Benefits • Main spindle power (intermittent): 11. 0 kw • Main spindle torque (continuous): 95. 5 nm • Rapid feed cross slide x1/z1: 15/15 m/min • Rapid feed turret slide x2/z2: 15/30 m/min Lhsdpfx Adex D Sccjwog • Rapid feed vertical slide v1/v2: 15/15 m/min • Thrust on all axes: 2500 n Extra Information Turret Tool positions: 8 Tool section: 16 x 16 mm Tool holder diameter: 25 mm Standard tool holder: VDI 25 Switching time station to station: 0.3 sec Switching time additional station: 0.06 sec Switching time 180°: 0.48 sec Tools Live tool positions: 8 Live tool holder shaft diameter: 25 mm Live tool power (continuous): 1.1 kW Live tool power (intermittent): 3.7 kW Live tool torque: 7 Nm Live tool maximum speed: 6000 rpm Dimensions Machine Depth 2630 mm

Condition: used, Year of construction: 2021, turning length: 320 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 200 rpm, turning diameter: 32 mm, spindle bore: 39 mm, overall weight: 2,900 kg, rotational speed (max.): 8,000 rpm, type of input current: three-phase, bar passage: 39 mm, power: 13.2 kW (17.95 HP), We are offering this used CITIZEN L32-1M10 automatic lathe, manufactured in 2021. Ljdsy Em Dyspfx Adwohg Model: L32-1M10 Serial number: V36540 Production number: L32A/2251 Date of manufacture: 2021-11 Total load current: 36 A Rated power: 13.2 kVA Short-circuit breaking capacity: 2.5 kA Weight: 2,900 kg ON/OFF: 6,851 hours (as of 22.04.2026) Operating hours: 19,327 hours (as of 22.04.2026) If you have any questions or need further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 200 rpm, turning diameter: 32 mm, spindle bore: 39 mm, overall weight: 2,850 kg, rotational speed (max.): 8,000 rpm, rotational speed (min.): 8,000 rpm, type of input current: three-phase, bar passage: 39 mm, Space requirement: approx. 2.5 x 1.4 x 1.75 + FMB m CNC long-turning lathe: Citizen L32-1M8, year 2018, equipped with FMB turbo 3-36 bar feeder and a swarf conveyor with "0" operating hours. LFV function: not available ON/OFF: 5,465 hours (as of 2026.04.22) Operating hours: 32,110 hours (as of 2026.04.22) Lhodpfsy Emnfjx Adwog

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type automatic lathe Make: STAR Model: SR-32 Year of manufacture: 1999 with: FANUC 16-T control Backworking capability Synchronous spindle Driven tools Lhjdpfx Adsyzyr Neweg C-axis Bar loader magazine FMB TURBO 5-42

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Ledpfx Ajyzxp Tedwohg Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 260 mm turning length 1500 mm turning diameter in the gap 570 mm turning speeds 45 - 1800 U/min centre height 210 mm spindle bore 52 mm tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 3,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Lhsdpfx Aoy Ehxxsdwsg Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool

Condition: good (used), Year of construction: 2006, CNC Swiss-type lathe Machine type: Citizen K 12 VII 1F7P Year of manufacture: 2006 TECHNICAL DATA: Main spindle Max. turning length: 200 mm Turning diameter: 12 mm Lodoy D Spxopfx Adwohg Bar capacity: 12 mm Speed range: 15,000 rpm Max. front drilling diameter: 10 mm Max. front threading diameter: M8 Spindle diameter: 16 mm Max. sub spindle machining diameter: 12 mm Max. sub spindle machining length: 40 mm Max. drilling diameter for back machining: 6 mm Max. thread diameter for back machining: M5 Sub spindle speed: 10,000 rpm Tool carrier, number of tools: 8 Speed of driven tools: 6,000 rpm No driven tools available for back machining.

Condition: good (used), Year of construction: 2008, CNC Swiss-type lathe Lodsy D Splepfx Adwshg Machine type: Citizen C-32 VIII 2M8 Year of manufacture: 2008 TECHNICAL DATA: Main spindle Max. turning length: 320 mm Turning diameter: 32 mm Speed range: 200 - 8,000 rpm Sub spindle Speed range: 200 - 7,000 rpm Driven tools Equipment: Bar feeder: FMB turbo 3-36

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2560460122, Tornos Swiss GT13/6 - Sliding Headstock Automatic Lathe CNC Control: FANUC 31i-B, 6 axes, 13 mm capacity Basic Machine Equipment: - 6 linear axes - Independent main and counter spindle - Synchronously rotating guide bush - Adaptation for operation without guide bush - C axis for main and counter spindle - Adjustable pneumatic ejector incl. counter spindle coolant flushing - 3-color signal lamp (yellow, red, green) - Centralized lubrication - Electrical interface for Tornos bar feeder - Oil mist extraction interface - Interface for fire protection system - Interface for customer M-function (6 inputs and 6 outputs) - Compliance with CE and EMC standards Main Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076) - Max. bar diameter without preparation: 10 mm Lodpfxeyzigco Adwehg - Max. bar diameter with preparation: 13 mm - C1 axis function Guide Bush: - Max. speed: 15,000 rpm - Max. diameter of synchronously rotating guide bush: 13 mm (with integrated motor), guide bush type: B (853) - Max. workpiece length in one clamping: 180 mm - Adaptation kit for operation without guide bush (max. travel: 30 mm) Tool System for Main Operations: - Tool holder for 5 turning tools 12x12 mm on the front of the carrier - Tool holder for 4 turning tools 12x12 mm on the rear of the carrier - S11 tool drive (10,000 rpm) for rotating tools mounted on the front of the carrier X1/Y1 - 1 drive module for cross machining with 3 spindles for ESX 16 collets (2 x 10,000 rpm and 1 x 6,250 rpm) - S21 tool drive (6,000 rpm) for up to 2 driven units mounted on the rear of the carrier X1/Y1 (driven units not included) - Tool carrier with 4 bores Ø 22 mm for stationary finishing tools Counter Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076), max. Ø capacity: 13 mm - C4 axis function Tool System for Secondary Operations: - Base carrier for 8 back-working tools; on the 4 upper positions, rotating and/or stationary tools can be mounted (rotating tools not included) - 4 lower positions with 4 fixed holders for ESX 16 collets - 2 stationary holders with Ø 22 mm bores (for upper positions) - S51 tool drive (6,000 rpm) for driving back-working tools (max. 4 rotating tools) ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing options to suit your requirements. Whether down payment, installment plan, or individual financing solutions – together we will find the right option for you. Upon request, we will also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and punctual process so you do not have to worry about a thing.

Condition: used, Gildemeister Italiana GD16 with LNS bar feeder Lhodpfxey D Nw Ts Adweg

Condition: ready for operation (used), Year of construction: 2004, Maier ML 32D CNC automatic lathe with FMB bar loader Lsdpfoy D Nwasx Adwohg Turning diameter over bed: 32 mm Spindle bore: 32 mm Control: SIEMENS 840-D-SL Spindle stroke: 220 mm Main spindle speeds: 6000 rpm Spindle motor: 5.5 / 3.7 kW Sub spindle – bore: 32 mm Sub spindle speed range: 8000 rpm Turning length: 220 mm Collets: 1536E Drive motor power: 5.5 / 3.5 kW Total power requirement: 16 kVA Machine weight approx. 4.3 t Space requirements approx. 6.40 x 1.60 x 2.10 m

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, Equipment: bar feeder, chip conveyor, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Maximum power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Ledpfxsy Dr S Hj Adwehg Axis data Linear axis Z1 / X1 / Z1 – Stroke: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Rapid traverse (max.): 40 m/min Linear axis Z1 / X1 / Z1 – Acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – Nominal force: 1,250 N Linear axis Z2 / X2 – Stroke: 180 / 230 mm Linear axis Z2 / X2 – Rapid traverse (max.): 40 m/min Linear axis Z2 / X2 – Acceleration (max.): 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS Control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on hours: 85,620 h Operating hours: 27,896 h EQUIPMENT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Central lubrication - Hand-held control unit - Documentation available

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen M32-2M3 CNC Swiss-type Turning Machine Year of manufacture: 2002 Control: Mitsubishi Meldas 635 Max machining diameter: 32 mm Ljdpfxsx Dncfj Adwohg 7 controlled servo axes: X1/Z1/Y1/X2/Z2/X3/Z3 4 driven tools on the vertical holder C-axis: main and sub spindle Including accessories: FMB Turbo 5-42 bar feeder Extraction system Parts conveyor 5 driven tools for turret 5 standard holders (turning/boring holders) for turret - Available immediately -

Condition: excellent (used), JBS guide bush pressure system Lhjdspl U Efjpfx Adwog suitable for Star Ecas 32 - on request the suitable maintenance unit can be delivered with it

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen R07-VI CNC Swiss-type lathe Year of construction 2015, in very good condition, annual maintenance has been carried out every year since new 2 identical machines are available, both ready for immediate delivery Ljdpsyk Iv Tjfx Adwehg Control: Fanuc Max. machining diameter: 7mm Number of servo axes: 6 Z1/X1/Y1/X2/Y2/Z2 Number of C-axes: 2 main and sub-spindle Number of tool positions: 5x turning tool holders / 2x driven tool positions / 3x drilling stations front and rear Including accessories: Iemca Elite 112 EVO bar feeder Büchele SFB-100 high-pressure unit Kraft und Bauer fire extinguishing system

Condition: like new (used), CNC Swiss-type lathe Weco S 206 E II Machine Bar feeder Tools The machine has 7,000 operating hours Lhodpfxsy A Sghe Adweg

Condition: good (used), Year of construction: 2015, Main and counter spindle 3 turrets Backside machining Fire extinguishing system Kraft & Bauer High-pressure system Büchele Ljdpfxeyx Tk To Adwehg Bar feeder FMB Turbo 2-20