Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. Lhedpfey Tiyyjx Adwjg The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. Lhsdpfx Ajy Tiygsdwog The system is available at short notice!

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Lodpfx Aey Tiyajdwohg

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness Ljdpfey Tix Ajx Adwehg

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Lodpfx Adey Tixcswohg With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Lsdsy Tiw Sepfx Adwehg Rotor diameter: approx. 450 mm Stator knives: 2 Rotor knives: 4

Condition: used, kW: 30 Rotor diameter: 500 mm Rotor width: 1200 mm Lhedpfxsy Tiqfe Adwjg

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Lhedpfsy Tip Uox Adwog Throughput max. 4t/h depending on type of plastic and material thickness

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Lodpfey Tipusx Adwohg Throughput max. 4t/h depending on type of plastic and material thickness

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness Lhodpfxey Tipbj Adwjg

Condition: reconditioned (used), functionality: fully functional, Drive power: 55-90 kW depending on the required performance and task Application: Drying and cleaning of hard plastics, PET flakes, films Ljdpfxoy Tinws Adwshg Output: 800-2500 kg/h depending on the input material

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Lhedpey Tindofx Adwog A total of four dryers of this model are available.

Condition: used, Year of construction: 2024, clamping force: 650 kN, displacement volume: 2,212 cm³, injection pressure: 2,090 bar, overall weight: 28,000 kg, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) delivery time: on request Lhedpfey Tbzvsx Adwjg terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,519 h, clamping force: 5,000 kN, screw diameter: 100 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details. Ledpfoy Tai Eox Adwohg • PP injection capacity: 1.5 kg • Mould dimensions, min.: 480 mm • Tie bar spacing (H × V): 900 × 800 mm • Maximum mould opening: 1530 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,858 h, clamping force: 4,200 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine. • Injection capacity (PP): 1.2 kg • Minimum mould dimensions: 380 mm • Tie bar spacing: 800 x 800 mm • Maximum mould opening: 1400 mm Ledpfxoy S Tw Hs Adwjhg • Working hours: 44,858 h

Condition: ready for operation (used), Year of construction: 2012, operating hours: 46,424 h, clamping force: 3,500 kN, screw diameter: 80 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Minimum mould dimensions: 380 mm • Tie bar spacing: 710 × 710 mm • Maximum mould opening: 1260 mm Lhedpfx Adoy S Tvvjweg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 49,627 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Mould dimensions (min.): 320 mm • Tie bar spacing: 630 × 630 mm • Maximum mould opening: 1000 mm Lhedpfoy S Tq Hjx Adwsg • Working hours: 49,627 h

Condition: ready for operation (used), Year of construction: 2011, operating hours: 49,533 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Minimum mould dimensions: 320 mm • Tie bar spacing: 630 x 630 mm • Maximum mould opening: 1000 mm • Working hours: 49,533 h Lhjdpfxoy S Tqae Adweg

Condition: ready for operation (used), Year of construction: 2018, clamping force: 1,900 kN, screw diameter: 45 mm, total width: 1,570 mm, total height: 2,180 mm, overall weight: 8,900 kg, product length (max.): 5,970 mm, This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Additional equipment • Air valves: 2 Machine Benefits Technical Machine Benefits • Screw Type: A / B / C Lhsdpfxsx D H Nqj Adweg • Screw Diameter: 40 mm (A) / 45 mm (B) / 50 mm (C) • Screw L/D Ratio: 22.5 (A) / 20 (B) / 18 (C) • Injection Distance: 201 mm • Calculated Injection Volume: 252 cm³ (A) / 319 cm³ (B) / 395 cm³ (C) • Injection Capacity (PS): 229 g (A) / 290 g (B) / 358 g (C) • Injection Speed: 160 (250)* mm/s • Injection Pressure: 253 Mpa / 2580 Kgf/cm² (A) | 200 Mpa / 2040 Kgf/cm² (B) | 162 Mpa / 1650 Kgf/cm² (C) • Holding Pressure: 202 Mpa / 2060 Kgf/cm² (A) | 160 Mpa / 1630 Kgf/cm² (B) | 130 Mpa / 1320 Kgf/cm² (C) • Screw Speed: 350 RPM • Nozzle Touch Force: 39.2 {4.0} KN{tf} • Nozzle In Size: 50 mm • Heating Input Power: 14.2 KW • Minimal Mould Size H*V: 370*335 mm • Ejector Stroke: 130 mm • Ejector Force: 44.1 {4.5} KN{tf} • Hopper Capacity: 25 L • Platen size: 840 x 790 mm • Distance between uprights: 570 x 520 mm • Installation height: 200 to 550 mm • Opening width: 470 mm • Max ejector stroke: 130 mm / max ejector bar length: 320 mm • Ejector coupling type: central haitian standard Ø 32mm / m16 • Centering ring: 160 mm / cascade control: 4-fold / core pulls bwap: 2 • Hot runner control units: external • Without handling Dimensions Machine Depth 5980 mm

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Ljdpsxu Uvajfx Adwohg Mold opening force: 220 kN Drive force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Mold opening (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mold weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement volume: 1,047 cm3 Shot weight for PS: 953 g Injection flow rate: 527 cm3/s Screw speed Standard / Option: 1/min. 285/349 Screw speed Standard or Stage 1: 95 PS Screw speed Option or Stage 2: 117 PS Nozzle clamping force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inches) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 19526ä

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system Ljdpfx Aerg Ebcedwjhg

Year of construction: 2005, operating hours: 14,300 h, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, controller manufacturer: AMADA, controller model: AMNC-F (FANUC 180i-PB), overall weight: 18,000 kg, total height: 2,318 mm, punching force: 20 t, product length (max.): 5,526 mm, sheet thickness (max.): 3 mm, table width: 5,120 mm, number of axes: 5, This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details. • X-axis rapid traverse: 100 m/min • Y-axis rapid traverse: 80 m/min • Maximum sheet size: 1270 × 5000 mm • Maximum material thickness: 3.2 mm mild steel • Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4) • Positioning accuracy: ±0.07 mm • Turret capacity: 45 stations • Turret rotation speed: 30 rpm • Punching force: 200 kN Lhjdpfxsy S A Tkj Adweg • Hits per minute – 1 mm pitch (5 mm stroke): 780 hits/min • Hits per minute – 25.4 mm pitch, X-axis: 500 hits/min • Hits per minute – 25.4 mm pitch, Y-axis: 330 hits/min • Maximum stroke length: 37 mm • Connected load: 27 kVA • Air consumption – machine: 250 l/min • Air consumption – Air Jet vacuum: 250 l/min • Operating air pressure: 5 bar • Tooling visible in the photos • 4 tool cabinets • Technical documentation (manual scan) • Machine + included tooling package shown in the photos • Machine fully operational: Yes (replacement of one pneumatic hose required to eliminate a minor air leak) • Machine connected to power: Yes

Condition: excellent (used), Rexroth Voith triple pump for Krauss Maffei, SY2DFE1-20/071/071 KM No. 6263540 KM No. 6441936 Lsdpoy S Amwjfx Adwshg R90196471

Condition: excellent (used), Year of construction: 2008, operating hours: 80,313 h, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, Arburg 520S-1600-400/170 two-component injection molding machine with sorting flap and gas boost (245) Year of production: 2008 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40/30 Injection weight [g]: 184/77 Injection pressure [bar]: 2000/2000 Closing force [kN]: 1600 Column spacing [mm]: 520 x 520 Plate size [mm]: 688 x 688 Control type: Selogica Tongue: English, German Installed power [kW]: 106 Working hours [h]: Lsdoy Szrfepfx Adwehg 80.313 Robot socket: euros 67 Air valve: 4x Core string: 1x Control of heating for molds: 3x Feed hopper: NO

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens Lodjx Hx Rnspfx Adwjhg A complete machine inspection was carried out by the manufacturer's service team on 17.12.2025. Inspection report available. Commissioning at the customer's site can be offered upon request. Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Technical specifications: • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity, rotary beam: 65–172 kW • Winder: contact winder with preset reel change • Max. winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional equipment and accessories: • 3-component dosing system • 80 mm automatic seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data entry