Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
10
Pos 1. MKH - simple feeder for entire packages Pos 2. MKH - automatic feeding system for planer with accelerator, Pos 3. WEINIG planer, type Hydromat 25R from one of the best vintages of 1989 Planer specifications: The width of the material to be planed up to 250 mm The height of the planed material is 140 mm Speed ​​up to 80 m / min (main motor 22 kW) Head layout: Nuw8q9z 1 Horizontal lower head, motor power 11 kW 2 Vertical right head, 11 kW motor power 3 Vertical left head, mot... more
KUPER veneer splicer Stand throat depth: 900 mm Workpiece thickness: 0.4 2 mm Flow speed: 15 m / min Engine power: 0.18 kW Power: 0,45 kW L x W x H: 135 x 58 x 160 cm Weight: approx. 1200 kg Bgwmzo22 Built in 1990 This machine is available from November 2018. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden more
2

Hydromat 23 Hydromat 23

Ariogala, Raseinių raj, LithuaniaLithuania
7164 km
1998
good (used)
Hydromat 23 planers Ss3nms more
15
CATALOG NUMBER 4957 TECHNICAL DATA - max planing width 610mm - max planing height 200mm *in advance: - pulling shaft, toothed - latches, 2 clamps Btinzp8q - gear shaft, pressure - planing shaft 610mm, 4-knife, 7kW - clamps, pulling shaft, smooth *from down: - introductory table top - sliding shaft, smooth, divided - planing shaft 610mm, 4-knife, 5kW - 2 sliding shafts, smooth - guide strip, side pressure *in the back: - side spindles + clamps: 1) vertical right 100mm, 3.7kW ... more
5
Jointer SCM 500 mm wide 3000 long shaft of 120 mm with 4 blades tersa. Side guide reclining and adjustable input by wheel table. 4 HP three-phase power. Magnetothermic and automatic start-up/delayed extinction of aspiration. Protection of the blades Harwi (system type pentograph) device. Machine cast iron. Weight 850 kg. Bb78hj9m8n more
1
Stand projection 1150 mm Feed m/min 10-30 m / min Feed continuously adjustable Yes Veneer thickness 3 mm Standard heating Yes Total power 1,5 kw Connection 380/50 v / Hz Machine dimensions 1 Length 2120 mm Width 750 mm Height 1670 mm Wxwe77jx Weight 520 kg more
4
5Postes Gfiafbizs Last lower shaft Good general condition Max 250mm / 140mm 380V more
3
Marunaka Royal FX Finiermaschinen Dimensions (Lxwxh) approx.: 1150 x 800 x 1500 mm Approximate weight: 350 kg Blade length approx. 340 mm, length 950 mm, width 270 mm. Max height 180 mm, height adjustment via hand wheel,. Feed: band width 220 mm,. Wqdwk3wr0 Engine capacity 2.2 kW, Cutting angle adjustment 0° - 60° on both sides. more
1

Hydromat 1000 Hydromat 1000

More Hydromat 1000
Ariogala, Raseinių raj, LithuaniaLithuania
7164 km
2007
good condition (used)
Planers Hydromat 1000 Bcnudzd30p more
15
CATALOG NUMBER 4958 TECHNICAL DATA - shaft width 410mm - 4-knife shaft - max thickness of the workpiece on a 200mm thickness - max. workpiece thickness on 3-side 120mm side heads *in advance: - latches - pulling shaft, toothed - pressure - planing shaft - pressure - 2 pulling pins, pulling, smooth - pressure *from down: - adjustable rollers in the lower worktop 3 pcs - side pressure of the material - a guide strip on the counter *in the back: - side spindles + 2 pieces of ... more


Finest pla...
daily

New machines via email!

Stay updated!
Jointer 500 mm - length of the tables of 2850 mm. control of entry and exit tables. Transverse tilt Guide. Engine 4 HP three-phase 380 volts with magneto-thermal circuit breaker. Harwi blades protector. 125 mm shaft, 4 blades HSS. Ls2irjm more
15
Working width: 220 mm Working height: 120 mm Spindle diameter: 40 mm Number of spindles: 4 PCs. Planing length: 2000 mm Feed: 2.2 kW, infinitely variable Feed rate: 6-22 m/min Size: 4200 x 2300 x 1700 mm Weight approx.: 3000 kg Division of spindles: Spindle 1: lower Spindle 2: right Spindle 3: left Juwbdi Spindle 4: upper spindle 5: top saw description of spindles: Spindle 1:5.5 kW, 6000 rpm, diameter 40 mm Spindle 2:5.5 kW, 6000 rpm, diameter 40 mm Spindle 3:5.5 kW, 6... more
3

Finiermaschine Marunaka Royal UP

Gersfeld, GermanyGermany dealership location
6620 km
used
Working width: 0 -40: 250 mm Table adjustment (at 60): 165 mm Table adjustment 0 -60: depending on the wood table setting (at 250): 300 mm Table adjustment (at 25 conventional): (2 x 300 mm) 600 mm Passage height: 1 -230 mm Feed speed: 50 m / min. Weight: 300 kg Machine dimensions (L x W x H): 1060 x 700 x 1450 mm Gfznm2aia more
3
used cleaned, function checked, test run new knives manufactured by Marunka Cdo9ag83 type Royal UP motor  kW 2,2 Max. Opening width - by cutting angle 40° 250 mm - by cutting angle 60° 165 mm max. passage height 180 mm cutting angle adjustable 0-60° feed speed 75 m/min blade width 335 x 66 x 8 mm adjustment manual moveable table height 610 - 710 mm adjustable table size 885 x 650 mm required space ca. l x w x h mm 970 x 850 x 1230 weight 525 kg total connected power ca. 2,2 kW located in  97... more
15
CATALOG NUMBER 4962 TECHNICAL DATA - max. width of the workpiece 220mm - max. workpiece height 130mm - 5 spindles: 1) horizontal lower 220mm 4kW 2) vertical right 130mm 3) vertical left 13cm; 2 and 3, 7.5 kW 4) horizontal upper 220mm 7,5kW 5) horizontal lower 220mm 11kW - all spindles adjustable up / down, right / left Gwbsb7efk - diameter of 40mm spindles - all spindles have a brake - 4 rollers, pulling, toothed, including one double - a pulling roller, smooth, double rubber in... more
8
Jointer width 410 mm - 3000 mm in length-adjustment table entry tables and tilt table output (for planing concave/convex) - blades with protective tilt guide - tree of 120mm in diameter, 4 blades tersa. three-phase motor 380 Volt 4 CV. Range hood of 120 mm chips. Machine completely in cast iron grey. Control irons. +/-1000 Kgs Ciq9svl more
5

Finiermaschine Marunaka Royal FX

Lichtenau, GermanyGermany dealership location
6795 km
used
Pickup! Blade tilt 0 °-60 ° 380 V Including knife Height 0 mm - 200 mm 33bjsjvod more
2

Finiermaschine Marunaka Royal FX

Gersfeld, GermanyGermany dealership location
6620 km
used
Working 00-40: 250 mm working height: 1-180 mm table setting: (60): 165 mm Table adjustment 0-60, depending on the wood table setting (at 250): 300 mm table setting (with 25 counter-rotating) : (2 x 300 mm) 600 mm Feed speed: 50 m / min. Weight: about 300 kg mass (L x W x H): 1060 x 700 x 1450 mm Yrtypp more
6

UNIPLAN PLANER FINISCH WEINIG UNIPLAN

Kłodawa, PolandPoland dealership location
6839 km
1991
used
WEINIG UNIPLAN Double Sided Planer Art. 1146 Ask about price Manufacturer WEINIG 993mndnhb Model / type of UNIPLAN machine Year of production 1991 Category Two-sided planer more
15
CATALOG NUMBER 4937 Bszq8wu8 TECHNICAL DATA: - max. width of the workpiece 220mm - max. workpiece height 130mm - 5 spindles: 1) horizontal lower 220mm, 4kW 2) vertical right 130mm 3) vertical left 13cm; 2 and 3 - 7.5kW 4) horizontal upper 220mm, 5,5kW 5) horizontal lower 220mm, 5.5kW   - all spindles adjustable up / down, right / left - diameter of 40mm spindles - all spindles have a brake   - 4 rollers, pulling, toothed, including one double - a pulling roller, smooth, double... more


Finest pla...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close