Used cranes for sale (642)

Condition: excellent (used), Year of construction: 2000, overall weight: 500 kg, total length: 4,250 mm, Overhead Crane Lredex Di Txepfx Apvjl ABUS - VS 0,5t x 4250 MACH-ID 9309 Make: ABUS Type: VS 0,5t x 4250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Lrjdpfexmf R Ssx Apvel Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2018, Lifting height 6000 mm Lrodpfx Apjwrcxmsvel Work load maximum 1000 Kg Rotation speed 2,5 M/Min Power 0,4 kW incl. 2 sling ropes

Condition: excellent (used), Year of construction: 2020, VETTER Pillar Jib Crane PS10-2.0 Sale from site! Manufacturer: VETTER Krantechnik Type: PS10-2.0 Year of manufacture: 2020 Factory No.: 2000204/01 Design: Pillar jib crane with electric chain hoist For sale is a used VETTER pillar jib crane suitable for industrial environments, workshops, production, assembly, and maintenance. This crane is ideal for lifting, positioning, and relocating workpieces, components, and machinery parts. Technical Data: Load capacity: 1,000 kg / 1 t Jib length: 2,000 mm Slewing range: approx. 270° Overall height: approx. 3,000 – 3,500 mm Estimated dead weight: approx. 350 – 500 kg Actual dimensions and weights may vary depending on configuration, column height, and installed electric chain hoist. Equipment: VETTER pillar with jib arm Lrodpjy Rkbmefx Apvel Electric chain hoist Load hook Pendant control / handheld operation Schneider Electric control element Main disconnect switch Base plate mounting Industrial design Condition: Used machine with age- and use-related signs of wear. Visual condition as shown in the images. Scope of delivery: VETTER Pillar Jib Crane PS10-2.0 Electric chain hoist Pendant control / handheld operation Scope of delivery as shown Inspection by appointment possible. Commercial sale – Sale without warranty. Subject to alterations and errors.

Condition: excellent (used), Year of construction: 2020, VETTER Column-Mounted Slewing Crane PS10-2.0 Sale ex location! Manufacturer: VETTER Krantechnik Model: PS10-2.0 Year of manufacture: 2020 Serial no.: 2000204/01 Lodpfxey Ri T Ij Apverl Design: Column-mounted slewing crane with electric chain hoist For sale is a used VETTER column-mounted slewing crane suitable for industrial, workshop, production, assembly, and maintenance applications. The crane is designed for lifting, positioning, and relocating workpieces, components, and machine parts. Technical data: Load capacity: 1,000 kg / 1 t Jib length: 2,000 mm Slewing range: approx. 270° Overall height: approx. 3,000 – 3,500 mm Estimated dead weight: approx. 350 – 500 kg Actual dimensions and weights may vary depending on version, column height, and installed electric chain hoist. Equipment: - VETTER column with jib arm - Electric chain hoist - Load hook - Pendant control - Schneider Electric control unit - Mains isolator switch - Base plate mounting - Industrial-grade design Condition: Used machine with age- and use-related marks and wear. Visual condition as shown in the pictures. Scope of delivery: - VETTER column-mounted slewing crane PS10-2.0 - Electric chain hoist - Pendant control - Scope of delivery as shown Viewing by appointment possible. Commercial sale – sold without warranty. Subject to alterations and errors.

Condition: used, Year of construction: 1978, arm length 5500 mm weight max. in kg 250 kg height 3800 mm Lifting height 3800 mm Crane number 1.30 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Lsdsyqvliepfx Apvorl If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), functionality: fully functional, Year of construction: 2023, total height: 3,500 mm, total length: 15,000 mm, total width: 6,500 mm, load capacity: 100 kg, Used ABUS and Yale Single-Girder Overhead Crane System EHB – HB110S Profile – incl. GM2 100 Electric Trolley For sale: a used ABUS single-girder overhead crane system (EHB) equipped with HB110S crane profiles. This system is suitable for light to medium-duty internal lifting and material handling applications in workshops, production facilities, and warehouses. Technical specifications: Manufacturer: ABUS Kransysteme/Yale Year of manufacture: 2023 and 2021 Type: EHB single-girder overhead crane Profile type: HB110S (500kg capacity) Fitted with power supply conductors Available track lengths: - 12,250 mm - 14,000 mm - 12,250 mm - 14,750 mm - 15,750 mm Crossbeams / Swing Beams: Length: 6,500 mm Quantity: 5 pcs (each length has 1 swing beam and chain hoist) Hoisting Equipment: - ABUS electric trolley Lrsdpsyyq Ilofx Apvjl - Type: GM2 100 The system is suitable for extension or integration into an existing EHB suspension crane installation. Ideal for efficient internal transport of materials and components within a production area. Scope of delivery: - As shown / dismantled from operation - Including crane documentation, drawings, and photos For more information, additional photos, or a quotation, please feel free to contact us. Price per unit: from €3,250.00 3 x Abus, 2 x Yale. Also available as a lot: 5 units.

Condition: good (used), 1. DEMAG drum brake Type: TH806/60 - RT315 TH806 Ljdpfxju Uvmfe Apvsrl 1 piece available. 2. ELDRO electrohydraulic lifting device Ed 1250/60

Condition: used, Year of construction: 2002, Additional title: Slewing crane Maximum load: 2000 kg Lrsdpjxykvmefx Apvjl Reach: 4 m Height: 4,61 m

Condition: good (used), CCode: 0379 Brand: BRENNA + ELEPHANT - ITALY Model: GR 200 - CE Standard Lodpjy Ndihefx Apvjrl Manually operated jib crane with cantilever beam - CE Standard Lifting capacity 200 kg Chemical-anchored base Complete with: Electric hoist RWM Mod. W 125 T1 V1 Type F - Capacity 125 kg - Speed 8 mt/min - Motor 0,6 Kw - Rpm 1400 Pneumatic suction lifter ELEPHANT Mod. VLA6F with 6 plates suitable for handling sheet metal and other materials - Capacity 500 kg - Plate dimensions diameter 265 mm - Transverse and longitudinal plate adjustment - Compressed air operation with powerful and quiet vacuum generator - Operating pressure 6-7 bar Height of support column 3400 mm Length of crane boom 4000 mm Overall dimensions for transport mm 4000 x 1100 x 900 h + Pallet mm 2000 x 1300 x 600 h

Condition: used, functionality: fully functional, Year of construction: 1981, machine/vehicle number: 253.936, load capacity: 5,000 kg, TAKRAF Overhead Crane / Indoor Crane 5t – Span 19,120 mm – Year 1981 For sale is a used TAKRAF overhead crane / indoor crane in good, immediately operational condition. This crane is ideally suited for production halls, workshops, steel construction, or industrial applications. Technical Data Manufacturer: TAKRAF Type: Overhead Crane / Indoor Crane Year of Manufacture: 1981 Load Capacity / Lifting Capacity: 5,000 kg (5 t) Span: 19,120 mm External Dimension incl. end carriage: approx. 19,360 mm Control: Pendant control Height from top of crane to hook: approx. 1,600 mm Lifting height (wire rope hoist): approx. 5,240 mm Condition Lrsdpfxsy R Ug To Apvel The crane is in good used condition and was in operation until recently. Inspection under power is possible by appointment. Dismantling / Availability The crane will be dismantled in CW 27. Until then, it can be inspected on site. Location AQUAtec Master in Metal GmbH Note Loading and transport by arrangement. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2016, Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type VS, lifting capacity 2500 kg -Accessories: A wireless remote control (transmitter/receiver) can be supplied for an additional charge. -Base plate: Ø 820 mm -Load capacity: 2500 kg -Chain hoist: ABUS type GM 6 2500.3-2, year of manufacture 2016 -2x lifting speed: 3.0/0.8 m/min Lrjdpey I Aknjfx Apvol -Drive system: yes -Swivel drive: yes -Projection: 5640 mm -Total height: 5060 mm -Hook height: 3830 mm -Swivel range: 360° -Transport dimensions: 1660/5870/H2460 mm -Empty weight: 2011 kg

Condition: good (used), Year of construction: 2019, 16 ton crane trolley, Kone, CXT, (chassis, rope, hook) – used - : Price ex-location: now only €5,000 instead of €12,500 (net), dismantled and loaded! Not included in the sale: bridge, remote control, coil hook. Lsdsy Iv D Uspfx Apvsrl Manufacturer: Kone Year of manufacture: 2019 Reference no. 200967176/10 Order no. 4501376439 Electric wire rope hoist Hoist type: CXT60410160SA5JDD0S Hoist serial number: 58704433 Load capacity: 16,000 kg Lifting height: 10.5 m Drum pulling force: - Rope length: - Classification: M5 Current consumption: 68.2 A Total output: 36.3 kW Hoisting motor Motor type: MF13XL200N260FA5132X-IP55 Serial number: 58202098 Power: 35 kW Gearbox type: GEN410NB000-D Lifting speed: 11.20/0.22 m/min Serial number: 58664786 Rope speed: - Inspections Operating voltage: 400 V, 50 Hz Control voltage: 48 V Serial number: - Control type: D2H overload SG Control cable - set load: 17,600 kg Circuit diagram: 200967176 Manufactured to IEC Travel drive Chassis motor type: MF06LA200-132F95001E-IP55 Serial numbers: 58531833, 58531836 Gearbox type: GES342PS3BO-A Serial numbers: 58657454, 58657451 Power: 0.65 kW Track gauge: 2,000 mm Overall height: approx. 65 cm Carriage type: M Wheel tread: 74 mm Flange width: - VFD serial no.: 37E43K2T18250130 Trolley travel speed: 32.0 m/min/- Original new price: approx. €20,000 Dismantling, including disconnection, will be professionally carried out by KONE. You will also receive the complete crane documentation and inspection book. Condition: good – very good Available: immediately Location: Niedernberg near Aschaffenburg Additional photos on request! Wiring diagram available as PDF, as well as operating manual, installation instructions, spare parts list, master data sheet, declaration of conformity, inspection book.

Condition: repair required (used), functionality: limited functionality, Tower slewing crane from a sawmill log yard, 7 m hook height, 36 m jib, lifting capacity up to center 3.0 t, at the front still 1.5 t. Dismantling can be organized. The relay for slewing the crane occasionally sticks. Lsdpjy Rzzdsfx Apvsrl

Condition: new, Year of construction: 2026, ⭐️ CAPACITY FROM 1 TON TO 100 TONS ⭐️ Lredpfx Apswr A Alevol ⭐️ DIMENSIONS – CUSTOM SIZE AGREED WITH THE CLIENT ⭐️ ✅ Overhead crane, commonly called a bridge crane, eot crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge. ✅ Usually there are include many kinds of types crane, firstly it was divided into single girder and double girder overhead crane. There are included normal type, european type, magnetic crane, grab crane, explosion proof crane, and so on. ✅ According to the different using environment and different application. We will choose the most suitable crane for customer

Condition: new, Year of construction: 2026, ⭐️ CAPACITY FROM 500 KG TO 10 TONS ⭐️ ⭐️ DIMENSIONS – custom production in any size ⭐️ ✅ Used with chain hoist or wire rope hoist. ✅ Fixed on the concrete foundation by anchor bolts ✅ Simple structure, convenient operation, small occupation space and large working range. Lredpfx Aswr Artjpvol ✅ Ideal lifting equipment for enterprises to improve efficiency and improve working conditions. ✅ Can replace bridge cranes and gantry cranes in many occasions, with low investment and high efficiency

Condition: new, Year of construction: 2026, NOTICE: POSSIBILITY OF CALCULATING ANY CRANE CONFIGURATION Thank you for your interest in our offer. WNM Sp. z o.o. offers a wide range of cranes, including: gantry cranes, semi-gantry cranes, cantilever cranes, column-mounted cranes, suspended overhead cranes, and top-running overhead cranes. We invite you to submit inquiries for quotations. Our pricing is based on customer-provided data such as crane type, lifting capacity, lifting height, dimensions, and travel rail length. This advertisement refers to a gantry crane/hoist with a lifting capacity of 5 TONS. All crane components are made from high-quality materials, ensuring durability and resistance to damage even in harsh environments. TECHNICAL SPECIFICATIONS: GANTRY CRANE WITH HOIST – 5 TON CAPACITY Span Length: 6 m Lsdpfx Apsv Ni Rxjvorl Lifting Height: 3.55 m Lifting Mechanism: 5-ton electric chain hoist Lifting Speed: 2.7 m/min Cross Travel Speed: 11 m/min Crane Travel Speed: 10 m/min Work Class: A3 Power Supply: 380V/50Hz/3-Phase Control Mode: Pendant control + remote control We issue VAT invoices for all machines. For any inquiries, please feel free to contact us.

Condition: new, Year of construction: 2026, POSSIBILITY TO CALCULATE ANY CRANE CONFIGURATION – from 500 kg lifting capacity up to 10 tons. Any dimensions available. Thank you for your interest in our offer. Lredpjv Ni Ikjfx Apvol WNM Sp. z o.o. offers the following equipment: gantry cranes, semi-gantry cranes, wall-mounted jib cranes, column-mounted jib cranes, underhung bridge cranes, and top-running bridge cranes. A VAT invoice is issued for all machines. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2016, Sell Aluminum Porta Gantry 250KG mobile gantry winch, 2016r in bdb condition. Lodpevcdciofx Apverl

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: • Total jib length: 300 cm • Working radius: approx. 270 cm • Type: column- / wall-mounted • Steel, rigid construction Ledpfx Apow Rddyoverl • Manual slewing • Complete with trolley and cables ——— - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: excellent (used), I will sell a 250kg crane + Demag winch. In very good condition. - Total length 185cm/ working 140cm. - Height 278cm. Lrodpfx Apowdraqsvjl

Condition: excellent (used), For sale: 360° rotating column jib crane with electric chain hoist trolley running along the beam. Robust industrial-grade construction – ideal for workshops, production halls, warehouses, or manufacturing facilities. The crane enables lifting and transporting heavy components within the workstation area. Technical specifications: • Lifting capacity: 1000 kg (1T) Lrjdpeyrg Auofx Apvol • Rotation: 360° • Working arm length: 412 cm • Working height: 312 cm • Total height: 405 cm • Electric chain hoist trolley • Power supply: 380 V • Motor power: 0.66 kW • Solid industrial steel construction Technical condition: used, fully functional, normal signs of wear.

Condition: excellent (used), For sale: a complete crane workstation consisting of two robust VETTER slewing jib cranes and a STAR LIFTKET electric chain hoist. The entire set is in excellent technical condition, ready for immediate use in a workshop, warehouse, or production hall. 1. VETTER Slewing Jib Crane (Year of manufacture: 1984) – Lifting capacity: 1,000 kg – Manufacturer: VETTER Fördertechnik, Germany – Model: G – Heavy-duty industrial design – Nameplates and torque setting instructions in accordance with DIN standards 2. Slewing Jib Crane – Specifications – Working height: approx. 460 cm – Total height: approx. 505 cm – Arm working radius: approx. 575 cm – Arm total reach: approx. 632 cm – Secure mounting to floor/construction 3. STAR LIFTKET Chain Hoist – Lifting capacity: 650 kg – Chain diameter: 7.2 mm – 2 falls – Lifting speed: 5.1 / 2.5 m/min – Power supply: 3~ 400V / 50Hz / 420V – Power: 0.9 / 1.2 kW – Year of manufacture: 2008 – Included: pendant control (up/down) with emergency STOP, trolley, and complete wiring/installation Condition: Devices are fully functional, regularly serviced (last UVV inspection visible on the nameplate). Mechanically in very good condition, ready for immediate installation and operation. Manufactured: 100% Made in Germany – high durability and reliability. Lredsw Rc I Ropfx Apvel

Condition: excellent (used), Year of construction: 2013, For sale: Complete overhead travelling crane with an electric chain hoist from the renowned brand Stahl, with a lifting capacity of 1000 kg. Year of manufacture: 2013. The set is fully operational and ready for further use. ✅ Technical specifications: * Year of manufacture: 2013 * Lifting capacity: 1000 kg (1 ton) * Hoist: STAHL ST2010 – robust and reliable unit * Drive type: electric, chain * Total crane length: 1046 cm (10.46 m) * Stable main girder + cable and power guides * Inspection possible on site – previously operated in a clean production hall Lredpfxjwcrazo Apvol The crane is in very good technical condition – well maintained and ready to use. Ideal for workshops, industrial plants, warehouses, metalworking shops, or tool rooms.

Condition: like new (used), functionality: fully functional, Chain cases PK1-PK10 Additional engines KBH / KBF / KBV / K-Motor, spare parts, brakes and much more available on request. Send us an email or call us. Invoice incl. VAT. Ljdpexxtdkofx Apvorl